Re: Satellite A300-1BZ white screen after logo Toshiba

Similar Questions

• Satellite Pro L300 - white screen after login

  Hi, got a laptop off a friend to watch as not start correctly. Vista Edition running Home Premium, it will start up the screen of the user ok but when a user is selected the screen goes white with just the mouse pointer showing (which moves ok on the touchpad). I can press Ctrl Alt Delete and get the blue menu screen - if I try the Task Manager with it it goes back to the white screen.

  I tried a repair of end upward to F8 but said no problems found. I can also start ok in Mode safe without getting a white screen. I tried a high diagnostic of MSConfig startup but still the same. I also disabled all services but still a Virgin.

  I have a secondary partition on the disk with the recovery of HARD drive there, but do not want to reformat. I tried to restore to several different, but restore points remains empty at the normal start screen.
  Someone at - it find it.
  Mark

  Hello

  Its hardware problem or software.
  Start the laptop in safe mode means that some essential software process would be disabled and the system would use only a few basics of essential equipment.

  So even if the laptop runs correctly in safe mode, it could be a hardware problem.

  That's why I think only with the help of HARD drive recovery would be the best way to know what's wrong here...

• Satellite A300-1MX - blue screen after installation

  Hello
  I have a problem with the Installation of Windows XP. I set Compatibility Mode and everything.
  But at the end of the Installation comes the blue screen and windows stopped.
  "An important topic for the operating system stopped unexpectedly.

  I loaded the Toshiba SATA drivers, but they don t work.

  I put t know what to do, please help me.

  And please forgive me my bad English

  Grettings Infi38

  Hello!

  You need to install SATA drivers before you install Windows and if you have compatible SATA mode you t need SATA drivers but you have lost performance a bit.

  So I want to reinstall Windows in AHCI mode, you need to download the Toshiba Storage Manager (http://eu.computers.toshiba-europe.com).
  Copy the driver on an external floppy drive and press F6 after starting the laptop to CD or create your own installation with nLite (http://www.nliteos.com/) disc.

  Good bye

• Satellite A300-1BZ: %1 is not a valid win32 application after change of themes

  Having had my Satellite A300-1BZ for a couple of years now, I found myself suddenly bored standard vista themes and started playing with change them. (I was after a ultimate black watch with change start menu and buttons etc.)

  In any case cut to the Chase, I went wrong somewhere with VistaGlazz through to replace something like shell32.dll
  As it said in the readme file I changed it to shell32.dll.bak

  My computer has continued to run fine until I ran a reboot. After that, I got after the log on screen was a blue screen with a mouse.

  http://i69.Photobucket.com/albums/i53/eazynowrudeboy/IMG000030.jpg

  Luckilly I have an iphone so managed to get on internet forums and find a solution which was to use a command in cmd.exe that fixed the problem.

  The only thing is now that I have a very basic windows Classic theme that when I try to change to Vista in the theme settings it gives the message:
  * "the theme could not load. %1 is not a valid win32 application. "

  Any help and step by step for the user base would be much appreciated! I guess it can't be that bad since Windows is still running and working properly!

  Thank you

  Hi tarmacsnortingmonster,

  That is the reason why I n t play with any 3rd themes part because I always read from time to time on various problems after installation. So I don't use Windows themes pre-installed and don t have problems.

  In any case, I think you should try a system restore to an earlier point before installing this theme.
  I hope this helps if not it is time to reinstall Windows, I think that :(

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• Satellite A85-s107 - white screen at startup by using the power of the battery

  Satellite A85-s107 white screen at startup by using the power of the battery

  When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
  After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

  There is no problem when I start upward when it is connected to an electrical outlet.
  Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

  Any suggestions?

  PS:

  also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

  Don t need to recharge the battery if the AC adapter is plugged ;)
  Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
  In this case, only the replacement could help and it could be a costly affair

• Satellite A300-1BZ running slow

  Hello

  I just bought a Satellite A300-1BZ and I am not very happy as the laptop seems to be very slow...
  I'm used to a 3 years old is not very powerful laptop and my new Satellite is most of the time slower.

  For example just to log in a 'normal' Web page processors must run at least 60% to 70% and keep this speed even just to keep the page running...
  Is this normal?
  I would have immagined such a new machine to be much better...

  Someone else has the same problem?

  Please let me know I think of sending this laptop back...

  Thank you
  AD

  I agree with Joey please don t forget an important fact. You use the Vista.
  Been to Vista specs and details?

  This new Microsoft OS is a monster. He eats the material resources and therefore you feel a slow performance.
  In addition, your laptop was equipped with different features and installed after many different applications that control functions.
  All programs running in the background s Vista and generally, they use a portion of the CPU performance too.
  All this can affect the performance of notebooks.

  So please don t compare this laptop with older laptops because most of these older machines is not equipped with the same characteristics and the same software!

  Concerning

• Battery not detected on Satellite A300-1BZ

  I JUST REPLACED THE BATTERY IN MY SATELLITE A300-1BZ WITH A GENUINE NEW
  NOW I GET AN ERROR MESSAGE SAYING (NO BATTERY DETECTED)
  I WOULD BE GREATFULL FOR ANY ADVICE.

  SANDDANCER.

  Hello

  Have you bought an original recommended by Toshiba battery?

  Are you sure that the battery is OK?

  Do you have the same message using the old battery?

  For me, it seems that the new battery is not fully supported...

• Satellite A300-1BZ - 2nd location on hard disk?

  Hi friends

  I'm new to this forum so forgive me if I don't post under the good discussion!

  First of all, I wanted to know if a 2nd HARD drive can be added to my Satellite A300-1BZ (PSAJ4E-03L016KS)?

  If this is not possible, no one knows what is the largest (gigabytes) compatible HARD drive that can be installed on this laptop?

  Finally if one of the above options is available to what type of disc HARD would I have to install (size) & I would be limited to the use of a mark of toshiba HDD?

  Any comments would be appreciated!

  AFAIK the A300 supports SATA HDD and usually there is no limit!

  Theoretically, you can use all the available 2.5 SATA hard drives.

  Concerning

• Cannot enable Bluetooth on my Satellite A300 - 1BZ

  My laptop package listed on bluetooth but I can't afford that. FN + F8 operating just shows WiFi power.
  Also there seems to be nothing in the Panel Manager or control device. I was wondering if maybe it was the bios previous to version 3.6 upgade the problem but I don't know if it's on before that.

  Sorry, but I didn t find info on BT on this laptop model - http://uk.computers.toshiba-europe.com/innovation/product/Satellite-A300-1BZ/150957/

  Are you sure that this laptop has Bluetooth?

• white screen after the signing, the

  I have a laptop HP 2000 who now has a blank screen after I connect. I've removed ask.com because it never works and when I restarted my computer I get this white screen after the signing, the. I can still see my settings or start menu. What can I do to solve this problem. Help, please.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• White screen after log-in

  I have a white screen after login, but it lasts for about 30 seconds my desktop appears.  Any ideas?

  I ran Microsoft Security Scanner and everything out very well.  I have McAfee Anti-virus works as well.

  Hello LA_Hay,

  Thanks for posting your query in Microsoft Community Forum.

  You did it any significant hardware or change software on the computer before this problem?

  A problem with the card installed on your system, might be a major cause of the problem. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.

  Start your computer in safe mode

  Step 2: If you do not have the white screen in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  If the problem persists, try Method 2.

  Method 2:

  Update your graphics card.

  1. Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
  3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer's Web site and download & install the latest driver.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Satellite M50 - white screen after login on Win 8.1

  Satellite M50 running 8.1 Win
  After login, download mouse white screen, but nothing else.
  Can run Explorer.exe manually via the the Task Manager for go, but some applications like Acrobat and Windows Mail does not work.

  I searched online and tried all sorts of fixes suggested without result.
  Any suggestions gratefully received!

  I don't know what the problem is here, but you can try to Win8 will stop completely and check the repair options. Try again with the system restore and roll back the OS a few days back. Maybe this will help.

  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

• Satellite A300-114 - not reinitate after that screen stops

  Hello.

  I have a Toshiba Satellite A300-114 running Windows Vista Home Premium.
  It worked well until two weeks, now, after some time of inactivity, the screen goes off and it turns on again. Spots bright disk hard but the screen remains black. This becomes more often.

  Does anyone have the idea, what the problem?

  Thanks :)

  Hi jjginga,

  Have you tried an external monitor to your laptop computer? It's interesting because if you can identify if this is related to the internal screen or graphics card.

  I had a similar problem on my laptop that the internal screen was black, only the outer one worked. The solution was replacing FL inverter or screen internal.

• Satellite C855 - white screen after BIOS update

  Hello

  I am a beginner user,
  I have Satellite C855
  Yesterday, I downloaded a 'update BIOS"that was sent to my computer.
  Since that my screen is blank, there is a hum in the background.

  I have a recovery back up on my external hard drive, but of course, the screen is blank so I don't know how the product.

  I think I must have downloaded a model or the update was not compatible.

  Hello

  White screen do you mean that nothing appears on the screen?
  You see the start screen of Toshiba, or if you are able to access the BIOS?

  Where this is not possible, try this:
  Disconnect the power adapter, remove the battery.
  Press and hold the power button for about 30 seconds.
  Then connect the two parts (batteries and AC adapter) for the laptop and try to turn on the unit.

  In case this would not solve the problem of the laptop, I'm scared of m the BIOS update was not completed successfully and I think that only authorized Toshiba service provider would be able to help you.