Re: Satellite A300-1EG - card reader does not work

Hello. Here's my problem:

My OS is WinXPSP2, all necessary drivers has been installed, including card reader controller. But when I insert the SD card in my laptop, nothing changes. In the Device Manager ""marked with "!" secure digital storage device
What is the reason for this problem? If anyone knows, please help me.

Thank you for the attention.
P.S. I'm sorry if something is wrong with my English.

You have installed the driver on the Toshiba site?
Check for an update and to update the driver:
http://EU.computers.Toshiba-Europe.com

The laptop is installed with the recovery disk or Microsoft?

Tags: Toshiba

Similar Questions

  • Satellite M40X: Internal card reader does not work

    My internal card reader does not work. I think that I have not yet installed the driver, or may have other reasons, I don't know. Please show me how to find and install this driver.

    Thank you!

    Can you please check the Device Manager and tell us if any unknown device is listed there?

  • The M70-267 Satellite internal memory card reader does not work

    Hello

    Internal memory card reader no longer works on my M70-267.
    Device Manager reports the error with the driver of the bus PCI 6 mass storage controller, device 4, function 3.
    The first problem, the result of this is?

    Help, please
    thanx

    Hello

    Yes, this mass storage controller could be the card reader. So, you can try to reinstall the drivers, which can be downloaded here:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    or you can remove it from the Device Manager and restart your machine

    or, if that didn't help then you should send your machine to a service partner chartered for an assessment of health/repair of equipment.

    To find the closest, you can check out this site:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Good luck
    See you soon

  • Satellite Pro A200: Card reader does not work after installing XP

    Hello...

    I deleted Windows Vista from my Satellite Pro A200 for XP Home.
    I'm much happier with the machine now, but I am unable to get any response from the card reader. There is no mention in the manual supplied with the machine.
    I cannot find any reference to it in the Control Panel hardware Manager and nothing changes here in it when I insert a SD memory card.

    I had no cause to try the drive before removing Vista, so I don't know if it never worked... Although I guess he did.
    A search of a pilot running in the download section had no success, and this forum has no direct answers.

    Does anyone have an idea what I have to do to make this work?

    Mintin Popa.

    Hello

    I put t see serious reasons why your card reader shouldn't run with installed Windows XP t/function.
    What you need is the right driver.

    The Toshiba driver page provides all the drivers Win XP and there is also an XP driver for the multi card reader.

    You need a Texas Instruments Flash Media Driver. He is a driver for your bridge Media Slot.
    This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

    See you soon

  • Satellite C850-B635 and Win7 - card reader does not work

    My laptop came with windows 8 and the card reader was not working
    but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

    I downloaded a driver called card reader controller, but it did not work as well
    I don't know if there is a problem or there is a driver should I install and I don't know.
    Please help me solve this problem.

    In my windows Device Manager, these devices is not recognized:
    * PCI simple communication controller
    * SM Bus controller
    * Unknown Device

    I tried searching in my page to download drivers on the Toshiba Web site but could not find these
    Please help me make my card reader works again.
    Concerning

    Post edited by: domaking

    For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
    My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

    I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
    http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

    In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

    Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

    Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components

  • Satellite X 200 and Windows7 (32 bit) - card reader does not work

    Hi all
    I hope someone can help.
    My X 200-219 has been recently upgraded to Windows7 and although it works well (better), the card reader does not work.

    Do I need a driver installed?
    Various looked but can't find anything obvious?

    Bravo and thank you
    DB

    Hello

    Try to install THIS driverplease.

    It is Vista 32 bit driver for digital multimedia card reader. I hope that it will work.

    Send comments.

  • Tecra 9000: SD card reader does not work with XP

    I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

    I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

    Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

    David

    [Edited by: admin]

    Hi David

    Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

    What you say, it is simply NOT true.

    The Tecra 9000 was delivered with 3 different OS.
    It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
    Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

    Of course, there are different models with a different hardware configuration, but all supports Windows XP.

    I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

    As you can see you must pay attention to many important things if you want to manually install the operating system.

    Good day

  • SD card reader does not work

    1 hp Pavilion Dv7-7002el

    2. Windows 7 64 bit

    SD card reader does not work

    Thank you

    Welcome to Brunn.

    Try to run this driver.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102462-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5254140 & sw_lang=.

    Let us know how things will go.

    REO

  • Qosmio X 70 - the SD card reader does not work

    I upgraded to 8.1 win a moment the card reader does not work. Nothing happened when I put a card inside. I tried serveral. I changed the driver to a new from the homepage of Realthek - nothing. What can I do?

    Can you please tell us what card reader device status in device (storage controller) management?

    Furthermore, what you have upgraded your machine following the instructions on http://www.toshiba.eu/innovation/generic/windows8_1-message/?

  • DV6 7303ef: SD card reader does not work

    Hello, everyone,

    I have problem, SD card reader does not work. Laptop HP dv6 7303ef, windows 7 64 bit envy. When I don't put SD card to laptop card slot computer no response.

    What drivers I shoud install/reinstall or do something else?

    Reagardings,

    Jokubas

    Hello

    Try the driver from the link card reader.

    http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56166.exe

    Kind regards

    DP - K

  • Compaq tc 4200 sd card reader does not work

    Compaq tc 4200 sd card reader does not work, bought with windows 8 is already installed, drank the card reader does not work. I'm not very computer savy so any help is the appretiated!          Thanks Lynn

    Hello:

    It is the only factor that has any chance of working.

    It works on the laptop running Windows 7.  I don't know if it will work on Windows 8.

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=1847704&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_70996_1%257CswEnvOID%253D2096%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • Product name: HP 15 Notebook: my card reader does not work - Mute red light does not

    My card reader does not work

    It happened several times after the upgrade to Windows 10

    It may work once or twice after the upgrade, but when there is an update from HP

    My antiverious is Kaspersky internet security and it is compatebale with windows 10

    Also, the Red mute botton does not work but the function works.

    your opinion and your support is appreciated

    Product number: L9N79EA #A2N

    Product name: HP 15 laptop

    Windows 10 House only 64-bit language

    Hello @KhaledMorcy,

    I understand that you are having a problem with your card reader and wanted to help you!

    Have you tried to use Windows Updateto search for the drivers that are compatible with Windows 10?  You can consult this site too: products HP - where can I find drivers Windows 10 and software for my model?

    If you have problems to install the drivers, you can use the tool on the following site:

    Open the Windows Update troubleshooting tool

    It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

    Also, check out the following document, as it can help to solve the problem for you:

    HP laptops - use and troubleshooting (Windows 8) memory card readers

    Please let me know if this information has been helpful by clicking the thumbs up below.

    Have a great day!

  • driver Ricoh SD card reader does not work after recovery/vista

    Hello

    I have toshiba laptop with vista professional.

    I did the recovery on computer

    Once the recovery sd card reader does not work.

    Yes, I did:

    Downloaded latest driver ricoh xd card disk image

    installed

    restarted

    .. .but still does not work

    does anyone have a solution for this?

    Thank you, klemen

    You update your copy of Windows as directed by my last answer?

    I tried to download driver Toshiba but it seems that there are no downloads for Windows vista for your specific model.
    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

    Check the Device Manager for the entries in the card reader under "ATA/ATAPI IDE controllers" and "SD adapters.

    Double-click on the devices to see their properties. On the general tab, note their descriptions and 'device status'.  In the Details under "Ownership" tab select "hardware ID" note the entries under "value".

    You can try to install the drivers built into Windows Vista

    1. in the Device Manager, click on your PC
    2. click on the menu "Action" "Add legacy hardware. Click next in the Add Hardware Wizard.
    3. check the box before "install the hardware that I manually select from a list (Advanced)". Click Next.
    4. under "Types of common hardware", select "IDE ATA/ATAPI controllers '. Click Next.
    5. under "Manufacturer", select "Ricoh company.
    6. in the title of 'Model' select your description of the appliance as shown in Device Manager.
    7. the full wizard.

    There are several Ricoh xD-Picture Card controller, you can try them all and see one that works.

  • U2413 SD card reader does not work with Windows 8.1

    My SD card reader does not work with Windows 8.1. There is no problem with the USB ports. Anyone else with problems?

    I have the same problem here too.

    The driver above does not work.

  • Built in SD card reader does not work

    I recently installed Windows 7, now the built in SD card reader does not work. Before, I was able to insert the card into the slot and would open a drive. No records for accommodation of readers appear on my computer.

    You have installed the Windows 7 drivers for the card reader?

    I go to the computer manufacturer web site and download the appropriate drivers.

Maybe you are looking for

  • iPhone 4 cannot be updated (iOS and apps)

    Hello community I have an iPhone 4 with an iOS installed 7.1.2. I am trying to download a new application that I did not and I get the message "unable to download. "This app requires iOS 8 or newer. I have it plugged into my pc and it is not possible

  • How to change minPCI WLan on Tecra 9000

    Hello I have a Toshiba Tecra 9000 with 11b wireless.I bought a minPCI 54g card, but I don't see where is the mini on the Tecra 9000 pci card, My question is how do I change the WiFi card mini pci please? Thank you all

  • Re: Toshiba Power Saver on Tecra A8 - which actually does?

    As stated in the subject. What does this utility actually do?Influence the speed of treatment? The brightness of the screen? The fan speed?Have you noticed an improvement in the life of the battery? What nosie, does perform the fan speed? My Tecra A8

  • Best card sd or pro duo to buy for recording HD on HX - 30V

    Can someone tell me which is THE BEST card to buy for HD recording on creating the highest quality on my HX - 30V? Thank you

  • Installation of vista Home premium errors!

    When you try to install windows vista family premium, it says "Device drivers are not found", it also says the operating system - UNKNOWN How can I solve this problem? I have the real windows vista upgrade cd. Help, please!