Re: Satellite A300-1GN - required XP for a long time to start

Hello

I have the Satellite A300-1GN.
I reinstalled from Vista to XP Home.
After you have installed all the drivers from my system starts more than 4 minutes. I'm on SATA (no AHCI) compatibility mode.
You have the same problem?

I can't go because I have the blue screen to AHCI.

Any ideas?

Hello

If you have disabled the SATA feature then the HARD drive and the entire operating system can not be used with better performance and this could be the reason why the laptop needs a little more to start.

But the problem is that if you allow the AHCI in the BIOS, then your operating system would not start and you need to reinstall new OS using the SATA drivers.

Another reason why Notepad starts slowly could be a large amount of running system process in the context of the BONE.

Factors that could affect the start-up procedure

Tags: Toshiba

Similar Questions

  • DV7 - 2173 CL Press power button for a long time to start.

    Hi guys,.

    I had happen for awhile now and it's starting to annoy me at the start, after that it was off for awhile I have to press and hold power for more than 5 seconds, someone at - it had happen before? or someone knows how to fix this?

    Thank you

    Fixed it by pulling the CMOS battery out and make contact between the 2 terminals... everything is good again...

  • Re: Which driver WLan I need for Satellite A300-1GN PSAGCE

    Hello people...

    I need help for my friend...
    Here we have a laptop Toshiba Satellite A300-1GN (PSAGCE) and on the page of the driver Toshiba, for each card has two or three companies...

    For example, wireless LAN, a Realtek, Atheros, Intel... which is right?
    Where I see that?

    I would also like that when I am trying to download a driver LAN wireless, I see a message that I do not have permission to view this page...

    What can I do?
    So I have now 4 yolks in Device Manager.
    Three things of base system and wireless LAN...

    Help, please! Thanks in advance...

    Hello

    As I m not wrong not the Satellite A300-1GN supports WiFi card Intel 802.11 a/g/n and you might find the WLan drive on the Toshiba WLan Portal:

    http://APS2.toshiba-tro.de/WLAN/

    Welcome them

  • Recovery Disc Creator Error - Satellite A300-1GN

    First of all, sorry for my English, but it is not my mother tongue. On my problrm, short and simple technique:
    I use Toshiba Satellite A300-1GN with Vista 32 bit. I tried to create a recovery using Toshiba Recovery Disc Creator disc.

    I inserted a new DVD disc in the DVD burner and program was working fine but suddenly that he will miss just give an error with something like that 'there was an error in the calibration of reinforcement sector. "Error code: 0E01B5-26-00037304"

    What's wrong?

    What should I do to create the disc of tha? I can only add, that I turned my system of any virus just as it was said in manual Toshiba, but it did not help.

    Pleas, help.

    Hello

    I agree with the codes for the TDKs are not bad and I had a very good experience with these media.
    I tried to burn the recovery disk using another brand and I've damaged 3 DVD + R discs
    Then I went to the TDK DVD - R and it is ok

    I think that questions is related to the question of the compatibility between the discs and the STRANGE...
    So it of really worth to test different media!

    Good luck

  • Satellite A300-1GN - media buttons do not work with Win 7

    Hei

    I installed windows 7 to my Toshiba satellite a300 1gn, short model No.: psagce and some illuminated media buttons do not work.

    I have the last drivest but still nothing. first button is expected to control the lighting of media buttons, touchpad and Satellite logo.

    second button is expected to open media player or something like that. the other front buttons work fine!

    Could someone helt solve me my problem?

    Hi mate

    Have you installed the VAP (value added package)?
    This package contains the necessary application that controls the media keys!

    Please check European Toshiba driver page for this package and install it!

    Welcome them

  • Satellite A300-1GN - where can I find a new display driver?

    Hello to you all.

    I bought last year, Toshiba Satellite A300-1GN, which has ATI Mobility Radeon HD 3650 VGA mode. I searched on the ATI site for new drivers, but there is no driver for my graphics card. I only found drivers for ATI Radeon 3650 HD, which is not marked as MOBILITY.

    Can someone help me with this problem?

    Hello

    Yes, that's normal that you can t find the drivers of mobility on the ATI Web site because they are designed only for cards of office.

    But why do you need a new display driver? You may notice a problem with it?
    Normally, you can get all the drivers on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Check this box!

  • I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock?

    I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock? In my opinion, it works on IOS8. Because I have not used in a long time, it has reset and does not connect to the wifi until I unlock, and I forgot the password to unlock it. I tried to clear up my iPhone but it requires Internet and iPod can not connect to Internet ithe, I also tried to restore the 'home' button and the lock button while connected to iTunes on my computer and that did not work either... Please let me know if I haven't tried something or have missed something.

    Thank you

    You have to follow the instructions for the erasure or use recovery mode in iTunes again. . You do not specify what happened when you tried to follow these instructions, or instructions for iTunes, which you tried to follow, but you will be able to exit the mode disabled via iTunes if you do not have Wifi:

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

    See you soon,.

    GB

  • Satellite M300 PSMDCA takes a long time to start

    I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

    First of all, when you start the computer, it takes a long time to start and activate Outlook.
    I am running Windows 7Home Premium.
    Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

    Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

    Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

    Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

    Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
    Quite often when scrolling on the websites of the page I'm going to freeze?

    I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

    Any thoughts? Thanks, Shirl51

    > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

    This nonsense!
    The system should boot up quickly my laptop needs 30 seconds to start.
    In my opinion, the system is screwed

    In your case, I recommend to reinstall the system.
    Did you create the recovery disk?
    If this isn't the case, I think that detailed instructions should be placed in the user's manual.

    After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!

  • Please can someone help me for a long time out of the payment itun

    Please can someone help me for a long time out of the payment of itun, I lost my phone.

    This is my information

    ****

    ****

    Thank you

    < personal information under the direction of the host >

    OK so tell me first your reason! It of your personal account, why do you give?

  • Want Firefox to save your tabs for the next time it starts?

    FF 27.0.1 on Linux Mint XFCE 16, up to date.

    I have my preferences set to "show my home page".

    Whenever I close FF with the X in the upper left corner, he gets up and asks me "do you want Firefox to save your tabs for the next time it starts? I check the box to ask next time and have tried both save and exit and just left. When I open the browser again, it seems to randomly decide to open all the tabs I had last time, or sometimes (rarely) just my home page tabs.

    I don't want to open all the tabs I had open, and I don't want the question whenever I have leave FF. I used FF for years with XP, but I am new to Mint.

    Done setting the prefs 'warnon' on the topic: config false page has an effect any?

    • browser.tabs.warnOnClose
    • browser.tabs.warnOnCloseOtherTabs
    • browser.warnOnQuit

    Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

    If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
    Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

  • I bought a new iPhone 6 s more and told me to load for a long time I did let him charge for 25 hours. Is that going to affect my battery life and what happens if I use it immediately?

    I have a new iPhone, and told me to let it load for a long time. I let it charge for 25 hours. This can affect my life of bacteria? And what happens if I don't use the phone immediately?

    Not at all, you can leave it plugged into the power supply, and it won't hurt the battery. However I am not leaving the phone in a State discharged for a long time. That can hurt so when he approaches zero the load soon.

    This user tip can help: when to charge your iPhone or iPad

  • When I select recently bookmarked it works ok, but when I select unsorted bookmarks it opens a window not closing cycles for a long time.and I want to close the window manually and not automatically

    When I use the selection recently marked with a bookmark in bookmarks, it works very well and load the page quickly and opens another window. but when I go to unsorted bookmarks and double-click on the desired bookmark it loads very slowly and cycles for a long time. If I go to the firefox icon in the Launcher on natty 11.04 with unity it shows two open windows. I click on the unsorted Bookmarks window and manually stop and it works well and unordered finishes, loading the bookmark page I was trying to see. Why the unsorted Bookmarks window closes on its own? Is there a setting I can do close automatically. It really slows down the loading of the page, I tried to see. well thank you for any help or advice.

    Create a new profile as a test to see if your profile is the source of the problems.

    See basic troubleshooting: make a new profile:

    There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

    If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

    See:

  • Hi all, I need a little help to try to solve a problem of updating Bios for a long time.

    I downloaded the new update of the Bios on the HP site. But when I try to install the update, the process goes up to only while it presents me with an error. Any help would be appreciated, I am trying to upgrade the Bios for the new firmware in order to perform a better processor. Thank you...

    Error code: 3033

    "GoTo" label not found

    on line 89 of w:\patches\i...ate\windows\installer.wbt

    My system is...

    Compaq Presario SR1339uk

    Serial number: CZB5050HBW

    System number: PS267AA

    Motherboard: Asus PTGD1 - LA

    BIOS version: 3.13 12/14/04

    Operating system: Windows XP Home Edition

    Not sure what's going on here, but here is a suggestion on how to properly install manually the update of the BIOS.

    Assume that you download SP26760.exe (BIOS 3.28)

    Start the update - go to the last message you get before it fails and stop. (must be where it prompts you to close the applications and will be saved).

    Open a DOS (command prompt).    You must be an administrator - so if you're running Vista or Win7 - make sure that 'run as administrator ' at the opening of the box.

    Once in the BACK, type:

    CD FOLDER

    go the the directory of temporary files.

    Then make a

    DIR /S 328.LE ROM

    to find the directory where the update files are located.    Type CD < directory name > to go in this directory (on my system, it was a folder called pft467D.tmp, but it might be different on your)

    CD pft467D.tmp

    Now manually invoke (the prompt back, no windows or the windows file manager) the update, with the appropriate switches.  By omitting the switches can cause other problems, as have reported activation of Windows problems.

    AFUWIN /i328. ROM /pbc

    For reference, on my system, here's what I saw in these folders:

    C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > dir

    Volume in drive C is DRIVE_C
    Volume serial number is FE8F-4AA6

    Directory of C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp

    26/04/2011 11:11 < DIR >.
    26/04/2011 11:11 < DIR >...
    24/01/2006 15:31 524 288 328.le rom
    01/07/2004 10:54 53 248 AFUWIN.exe
    01/07/2004 10:54 amifldrv.sys 6 912
    21/02/2006 18:08 526 374 Installer.exe
    09/05/2006 17:10 sp26760.rtf 1 784
    11/04/2005 10:55 398 696 WBDEG44I. DLL
    6 file (s) on 1 511 302 bytes
    2 dir 110,361,944,064 bytes free

    C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > AFUWIN i328.rom /pbc

    It should work OK, however no guarantee if there's something else - but essentially - that's what the installer should do.   If this does not work for you - I wouldn't try to force things - you can make a good motherboard unusable quickly.

    For those who are looking to this announcement - the syntax is for this motherboard only - switches may be different for different motherboards.

    Good luck.!

    -DM (while I am an employee of HP for a long time, the comments/suggestions here are my own, not those of my employer).

  • I found iphone locked by owner for a long time in Europe and I need to contact the owner, but I was able to reach him?

    I found iPhone locked by owner for a long time in Europe and I need to contact the owner, but I was able to reach him?

    Return it to the police.

  • I used numbers for a long time, but only make spreadsheets base.  With the latest updates, I couldn't change my information.  What Miss me?

    I used numbers for a long time, but only make spreadsheets base.  For about a year and with the latest updates, I couldn't change my information.  What Miss me?

    Hi Deb,

    There not really enough information in your message to help you. How things don't work, exactly? Is there any alerts or messages?

    Quinn

Maybe you are looking for

  • Magic Mouse connected but no display on screen pointer

    Just pass on my iMac and Magic Mouse and not even connected. Mouse as connected but shows there is no pointer arrow on the screen. Please notify. If the mouse is broken how can I shut down the computer?

  • Problem with WiFi connectivity in windows 8.1

    Hello I have problems with my Wifi on my HP Pavilion 15 Notebook (product number: G2H02PA-#ACJ)I have Windows 8.1 as well as Ralink RT3290 802.11bgn Wi - Fi adapter.My Wifi connection says LIMITED connectivity. I've already complained about my proble

  • "Protected HP cartridge installed" error

    Dear community, I have a printer HP Officejet pro 8600 and recedntly I bought a reremplie cartridge. When I installed the ink I constantly get a protected "HP cartridge installed" error message. I already turn off the setting "HP cartridge protection

  • How can I edit 360 see the video through adobe program?

    I would like to know is it possible to edit 360 see the video through adobe program?In fact, I used Adobe Premiere Pro for regular video editing, and I've heard say that sky box 360/VR plugin and first Pro CCto change the view 360 video.If so, first

  • Approval of the Oracle project

    Hi allI need like this and help me how to achieve this requirement for needs of the companyRequirement:------------------------------"If someone creates a project in Oracle Apps project accounting, the project gets approved on its own.Company want to