Re: Satellite A65 will start not because of recovery CD formats the HARD drive?

Similar Questions

• Satellite P30: How to format the HARD drive and install a new OS?

  I have a satellite P30 laptop with Windows XP. I plug myself a new OS (namely because I can't find my old recovery CD CD and OS) that I want to do a re-shape full of my system. Reason is that my system has been painfully slower and slower over the last year. I even updated my RAM to 512 MB standard supplied with the machine to 2 GB, but it seems to have had little or no effect. So my questions are:-

  1] where can I get my hands on the restore CD that has all the drivers on this subject, and any recovery CD to reformat my HARD drive?
  [2] in the order in which I will make this reformatting?
  How can [3] after having bought an external HARD drive to keep files that I don't want to lose, I transfer those of before my re - format?

  Any help will be greatly appreciated

  :-)

  Hello

  You received with the laptop Toshiba Recovery CD! Am I wrong?
  So what s the problem?

  Simply insert the CD and try to boot from this CD.
  The restore CD contains all Toshiba drivers, tools and utilities Windows OS + additional software like Win DVD for example.
  The installation will set the laptop to factory settings, but will also format the HARD drive!

  Up to now, we come to the point 3; --> How do I save the data
  If you have purchased a second HDD and connect it to the USB port and transfer all the necessary files on the second HDD
  If you have purchased only the HARD drive, then you will need a USB HDD 2.5 case.

  Best regards

• Satellite Pro A40: Is it possible to format the HARD drive without disk

  I am passing on a Satellite Pro A40 to a brother. It is in very good condition, but has slowed down over the years. I want to get rid of my data (I have on a new machine) and speed up the system by formatting the hard drive.

  The machine didn't come with a disc for Windows XP, or a recovery CD (just a CD "tools and utilities"). I'm sure the drive HARD will be partitioned, and I can format the drive without such a disc.

  If this is true, how should I do?
  Thank you.

  Hello

  I can't believe that you do not have recovery media.
  The laptop must be supplied with recovery CD, Tools & Utilities CD, and WinDVD.

  But back to your question;
  If you insert a new HARD disk, you will need to use the Toshiba Recovery CD or the original CD of Microsoft Windows to install the operating system.
  The new drive is not partitioned HARD and doesn't have any OS pre-installed!

  If you n t have the original CD of Microsoft OS you can contact the service provider allowed in your country and you can order it.

  I hope I could help

  Good bye

• I have a winsock error, so IE won't connect, even though it says I have full signal. If I format the hard drive and reinstall xp it will fix the problem?

  Winsock error

  Hi I have a winsock error, so IE won't connect, even though it says I have full signal. I got the fix for microsoft programs, nothing has worked, if I format the hard drive and reinstall xp it will fix the problem. Thank you

  Hi I have a winsock error, so IE won't connect, even though it says I have full signal. I got the fix for microsoft programs, nothing has worked, if I format the hard drive and reinstall xp it will fix the problem. Thank you

  Check that your antivirus (all-in-one suite If you have one) is not turn off your network traffic.

  Note the devices installed in the machine.  Use this information to download the latest version of the drivers and software for the manufacturer's Web site features (on another machine and store on an external support, I suppose, would be the only way for you to do.)

  Uninstall the software/drivers for network devices.  Turn it back on.  Even if pilots are found/installed automatically, manually update the drivers & software using the files you downloaded earlier.

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Open a command prompt and run the commands following one at a time (after each ENTRY) without leaving the part through if somehting started working...  Note all errors and post them here.

  netsh winsock reset catalog
  ipconfig / renew
  ipconfig/flushdns
  ARP d *.
  nbtstat - RR

• I got a message that my Windows 7 is not genuine. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  I took my office for repairs after that my motherboard has given. I did an upgrade and the repairman had my re - installed Windows. I know evil to fix my Internet security software and discovered a list of other problems with missing or corrupt files. After inspecting my system, I discovered that the repairman installed Windows with a product key is counterfeit.

  I have my legitimate Windows 7 Home premium disc and product key. How to re - install Windows 7, because windows fitted by repairer are Home Premium 32 Bit, and Windows I have are Home Premium 64 Bit.
  I would like to do a full install of Windows, I backed up all my data and have all the product keys of software installed on my desktop. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  Boot from the DVD 64 bit Windows 7

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  If you have problems, use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I need to format the hard drive and it won't let me because the program is running.

  Please help someone... I have a desktop running windows 7.  I need to format the hard drive and it won't let me because the program is running.

  Any ideas on how to get this tour using the bios screen, or y at - it an other way round. The drive has a partition, but no other programs on it.  I'm actually getting rid of the computer and need to erase the first hard drive and reload windows xp pro.

  Thanks for any help given, I'm desperate.

  Original title: help with windows 7

  Reinstall Windows XP
  http://michaelstevenstech.com/cleanxpinstall.html

  Insert your Windows XP CD, and then restart your computer.

  When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Windows XP will go into its configuration process.

  Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

  Press F8 on your keyboard to accept the license agreement

  Select the partition, and then press D on your keyboard to remove it

  Select Format the partition using the NTFS file system

  Press F on your keyboard to start the formatting.

  Installation files will now be copied to your hard drive

  Your system will be rebooted, the installation of Windows XP will continue

• I have an XP machine (not); formatted the hard drive and installed Fedora instead. However, I would like to go back to XP now.

  I have an XP machine (not); formatted the hard drive and installed Fedora instead. However, I would like to go back to XP now. I have the product key, but really am struggling to install XP. Any ideas?

  original title: Reinstall XP on Fedora

  See if this can help, its for Windows 7 b ut can work for XP (worth a try).

  Windows 7 USB/DVD download tool:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
  Also: http://www.elmajdal.net/Win7/Using_The_Windows_7_USB_DVD_Download_Tool.aspx

  J W Stuart: http://www.pagestart.com

• A satellite will not start - how to back up data from the HARD drive?

  Hello
  My laptop won't turn. How can I take backup of internal hard drive?

  Please read my writing as soon as POSSIBLE

  If you n t have access to your saved data remove the laptop HARD drive, connect it to the other PC as external device and you should have access to all stored data if the HARD drive is not defective.

  What you need is USB 2.0 IDE 2.5 HD enclosure disk hard drive / external case/Box.

• Envy 15-j059nr: Envy 15-j059nr would not start Windows after update to win10 now the hard drive is missing

  This system worked before Windows 8.1 it has been upgraded to Windows 10 last year. It's my boyfriends computer and last night it kept getting blue screen dreaded with errors on his hard drive. He kept ignoring. Then, his computer's battery died and when he started upward, he could get a blue screen and act as if it would repair itself and would just start all over again. He was going in a loop. He did not know what he was doing, but searched on the Internet and ended up messing around any more.

  Its installation was 850 GB HD 3 partitions, it was set up as a Raid was one the main C drive, one was the restore disc and the other hides. He changed the disk. He changed a few things in bios too, but I don't know exactly what.

  The problelm I have right now, is that when that I boot without the USB bootable media, I created, I'm stuck at a screen that says there is no startup disk and no installed operating system and press F2 to run Diagnostics. When I run the diagnostics, just fine, no errors.

  When I try to recover, repair, reimage or anything other that to reinstall, it goes back to the screen I mentioned above which does not allow me to do anything about this either, with the exception of past at the command prompt, which is X and not C. I did a dir/w and only seen the windows files are here , but under the users directory, documents and images are empty, so don't know if it's even watch what I think it is.

  When I want to install Windows 10, everything goes smooth and then bam, he wants that pilots. I can't find the drivers for this laptop who don't have the .exe and require installation. This notebook is not a CD/DVD player on it. I don't mind doing a reformat and start all over, if I could recover his pictures on his hard drive. They are his grandfather.

  Help, please!

  Thank you in advance!

  AggieFan378

  You are the very welcome.

  Unfortunately, I woudn't be able to help you with that.

  I'm afraid that the PC is now a useless paperweight because of the BIOS update has failed.  There is usually no recourse other than to replace the motherboard.

  If all goes well, you were able to recover the files before that happened, and if not, get a SATA cable adapter USB and read the hard drive on another PC.

• Satellite M40: Question on formatting the HARD drive

  Dear Toshiba

  I have laptop satellite M40 and want to format that my HARD drive is it certain that the software used for Toshiba HDD format

  Help, please

  Hello

  What HARD drive you want to format?
  If you want to format the HARD disk where the operating system works you can do if you are recovering your operating system with the recovery CD. However, you can boot into DOS mode and there you can try to use the format command. Note: You will lose all your files!
  Also if you want to format an external HARD drive or a second partition, please right click on this drive, then format

  You can also use a magic of Partitions if you want to create partitions, change the size or format hard drives.

  Good bye

• Satellite L305D S5895: Win 7 cannot find the HARD drive or cannot format the HARD drive on a clean install

  I have laptop Satellite L305D S5895 of the customer. It was delivered to me by the customer who tried to install Windows XP Pro, Vista and none would install.
  He said he tried all the CD that he had finally dropped on it and delivered it to me installation.

  When I got the score have been removed, so I tried to install Win 7 and when I do a custom install, I get an error indicating that the hard drive can not be formatted on disk 0 or it will give an error that no hard drives have been found.

  I have reset the bios default and no matter what I do, it won't format or find the hard drive. I was going to upgrade the bios, but the only way I found to upgrade the bios is once windows is installed.

  Everyone has ideas about this laptop so I can get a system installed. I checked the bios and there is no parameters for a sata, raid or IDE disk drive, so it seems that this version cannot be changed.

  Thanks for anyone who can help you.

  Rick

  Hello

  First of all it is an American notebook series.
  [Satellite L305D-S5895 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2144776& rpn = PSLC0U & modelFilter = L305D-S5895 & SelCategorie = 3 & selFamily = 1073768663]

  The laptop supports a processor AMD and ATI chipset.
  This means that the drivers SATA is part of the ATI graphics card driver.

  You must include the first SATA driver in order to install the Windows operating system.
  You could add the SATA driver for the Windows disk using software like nLite / vLite

  Welcome them

• Satellite A200-1AE (PSAECE) Vista has detected a problem with the HARD drive

  I have problem with my mass storage device, or else I think it's this feature that I get this error message when I start my computer [(photo de Massage de l'erreur) | http://img513.imageshack.us/img513/1059/errorxd5.jpg] and I think it has something to do with that [(Image in Link) | http://img132.imageshack.us/img132/2703/divicemanagerax9.jpg]

  I don't know which driver download for this problem.
  If anyone can help it will be much appreciated. I am running windows Vista x 86.

  Hope helped photos

  Hello

  The first error message said nothing; He only says that something is wrong on the HARD drive.
  Why you n t pres the button Don t ask me once again this problem?
  It seems the message again using this option?

  On the second picture, I see that your Intel Matrix Storage Manager has not been installed on your Vista 64 bit OS.

  On the European driver Toshiba page, you will find the 64 bit Vista drivers. Please download the Intel Robson Package from this site and install it. Robson package includes Intel Matrix Storage Management Utility for the management of your local storage space.

  Check it!

• Cannot start Windows XP. How to format my hard drive and reinstall Windows XP?

  Unable to log on to Windows XP and continues to repeat the initialization. May I know what is happening to my system?

  Dear Sir/Madam,

  I can not even log in to Windows XP, this is why I am not able to access the system restore. Can I know how can I format my hard drive because I can't find all a command 'format '. The system continues to repeat opening a Windows XP session but failed. Help requested to provide your professional advice & solution.

  Yours sincerely,

  Davidaries

  Hello DavidariesGoh

  Reinstall Windows XP
  To reinstall Windows XP, try either of the following methods. If the first method does not work, try the second.
  
  Note You can disconnect from the Internet during the installation. This helps to protect you against malicious users. Method 1: Start the reinstallation of Windows XP to reinstall Windows XP by using the Windows XP CD, follow these steps:

  1. Start your computer.
  2. Insert the Windows XP CD in the CD drive or DVD drive of your computer.
  3. In the Welcome to Windows XP page, click Install Windows XP.
  4. On the welcome page in Windows installation, click upgrade (recommended) in the Type of Installationbox (if it is not already started), and then click Next.
  5. On the license agreement page, click I accept this agreement, and then click Next.
  6. On the your product key page, type the 25-character product key in the product key boxes, and then click Next.
  7. Get the updated Setup files page, select the option you want, and then click Next.
  8. Follow the instructions that appear on the screen to reinstall Windows XP.

  If you completed the reinstallation, congratulations. You are almost finished. Please go to the section "after you have reinstalled Windows XP' at the end.

  If you receive an error or if the reinstallation did not finish, try Method 2. Method 2: Repair install of Windows XP by starting your computer from the Windows XP CD Note if Windows XP was preinstalled on your computer, you may need the installation CD to reinstall. Contact the manufacturer of your computer to make sure that you have the CD for a repair installation.

  To reinstall Windows XP by starting your computer from the Windows XP CD, follow these steps:

  1. Insert the Windows XP CD in your computer's DVD or CD drive, and then restart your computer.
  2. When you receive the message "Press any key to boot from CD" on the screen, press a key to start your computer from the Windows XP CD.
  3. The following message on the Welcome to Setup screen is displayed:
     This part of the Setup program prepares Microsoft Windows XP to your computer: to set up Windows XP now, press ENTER. To repair an installation of Windows XP using the Recovery Console, press R. To quit Setup without installing Windows XP, press F3.
  4. Press ENTER to set up Windows XP.
  5. On the Windows XP licensing agreement screen, press F8 to accept the license agreement.
  6. Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
  7. Follow the instructions that appear on the screen to reinstall Windows XP. After repairing Windows XP, you may have to reactivate your copy of Windows XP. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
     310064 how to fix Windows XP Setup problems when you upgrade from Windows 98 or Windows Millennium Edition

  If you completed the reinstallation, congratulations. You are almost finished. Please go to the section "after you have reinstalled Windows XP' at the end.

  If you receive an error or reinstallation did not finish, unfortunately, this article did not resolve your problem. For your next steps, you can ask someone you know for help. Or, you can contact Microsoft Support to help you resolve this problem.

  Back to top

  After you have reinstalled Windows XP after completing reinstallation, perform the following final tasks.

  Note You can also turn on the firewall in Internet Explorer. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

  283673 how to activate or turn off the firewall in Windows XP

  Reinstall Windows XP Service Pack 2, Windows XP Service Pack 2 (SP2) has been installed on your computer until you have reinstalled Windows XP, you must reinstall SP2. If you do not have already reinstall SP2 with Windows XP in the previous section, use one of the following methods to reinstall SP2 now. To order Windows Service Pack 2 on CD, visit the following Microsoft Web site:

  http://www.Microsoft.com/windowsxp/downloads/updates/SP2/cdorder/en_us/default.mspx

  For more information, click on the number below to view the article in the Microsoft Knowledge Base:

  322389 how to obtain the latest Windows XP service pack

  Reinstall all Windows updates after reinstalling Windows XP, you must reinstall all updates to Windows also. To reinstall Windows updates, visit the Microsoft Web site at the following address:

  http://update.Microsoft.com

• Satellite Pro A110 - in BIOS exclamation Point in front of the HARD drive

  Satellite A110 Pro PSAB1C-GM80XE

  Question is this. SATA CONTROLLER TOAST the laptop?

  Story.

  It seems as if the laptop hard drive has failed.
  Prior to the laptop, it would get BSOD.
  It would, however, go back to windows XP.

  After that, sometimes it wouldn't restart, he would try to boot from lan as if there is no hard drives.
  I check the bios.

  There is a! in front of the model of the drive. I can't change it, reset default does not change.
  No update of the bios was already made.
  Page drivers laptop says I have to install the update to the bios from windows xp... I can't do it of course.

  I bought a new hard drive for the laptop. WD Scorpio Blue (pretty standard) 160Gig

  The laptop recognize model to drive hard in the bios, but once again with the exclamation point in front of the name of the template.

  BIOS can see, but nothing else. No windows CD is able to watch the HD.

  Once again, it is the sata controller or can someone point me to an update of the bios I can do with a USB key.
  Should I just throw the laptop in the trash? I expect to give it a new life with a new hard drive and own bones.

  Hello

  What is the BSOD STOP Code?

  If 0x0000007B, it means that Windows cannot find a SATA driver for the SATA controller. To solve this BSOD, set the SATA Mode in the BIOS in "COMPATIBILITY" mode, or use a USB floppy with the SATA driver on this subject during the installation of Windows. Press F6 when you are prompted to install a 3rd party storage driver.

  Or otherwise, to use the original Toshiba Recovery disk to install Windows.

  I do not mean the exclamation point in the BIOS that the HARD drive is faulty, it means that the HARD drive has the highest priority boot on my laptop.

• Satellite L300D - TEMPRO said that I have no space on the HARD drive

  Hello

  I'm new to the site... I got a L300D for three months and no problem but in the last two weeks, I had TEMPRO warns my readers have free space that disappears quickly.

  In fact at this moment I have a total of * 800Mbs * when in fact I more than * 90Gbs * and I even used a shedder file to clean up more space.
  Is there a way to get TEMPRO on track or is this a normal problem, unsolveable.

  Hey Buddy

  TEMPRO is a tool that scans the entire HARD drive
  I guess you have different partitions on the HARD drive and I guess Tempro tells you that the free space among available partitions_ _on breaks down

  Well, I'm not quite sure what partition is a sense but perhaps hidden partition Vista first, s (WinRE).
  You should know that Vista uses a hidden backup files partition, this partition can be used if something goes wrong with the operating system

  I think Tempro means that partition