Re: Satellite C660 - after cooler BIOS update speed is increased and troubling

Good evening
Five hours ago, I did update the BIOS and restart the computer after that I noticed that the speed of the cooler is increased and worrying. Mention that they bought a Toshiba Satellite C660 last month.
Please, if you can help me how to set the correct rotation!

Thank you!

PS: Sorry for my English I'm not from England!

I think several people have posted about it here on this forum so it's a shame you don't l l check this forum before you took the decision to put the BIOS updated. If you have some time check other assignments in category C satellite.

In any case, I can say, it's that you can try to reduce the speed of the cooling fan with cooling method option in the advanced power settings.

This should reduce the speed of the cooling fan and your laptop will work a lot quieter. Put simply to option in battery mode.

Tags: Toshiba

Similar Questions

  • Re: Satellite C660 - after the BIOS update can not connect to Internet

    Hello
    I've recently updated my BIOS on my Toshiba Satellite C660 1.70.
    Everything goes well, but when I rebooted and tried to connect to the internet, he could not.

    I thought that there was a temporary error, but it's been 3 months and it has still not repaired.

    Can you help me? Thank you!

    Have you tested with WLAN and LAN connection?
    Have you noticed the same problem using two connections?

  • Satellite A300 - after the BIOS update I can not install two OS

    Hello everyone:

    I bought a laptop Toshiba Satellite A300-247 with Windows Vista Home Premium.

    Then I formatted it and divided the hard (320 GB) into 6 partitions and installed Windows Vista and Windows XP on drive C to drive D after having changed the SATA controller mode in the BIOS for compatibility. The computer worked well with 2 operating systems. However, when I updated the BIOS to version 1.9, two operating systems stop working and one of them can be installed: XP can be installed when SATA controller mode is placed on compatibility and Vista can be installed only when the SATA is changed to AHCI.

    Is there is no explanation of what past? And can I install operating systems 2 together again?

    Thank you

    Hello

    First of all, I doubt that this has something to do with the BIOS update. I think that after the BIOS update HARD drive mode has been changed from AHCI to compatibility and therefore the OS didn't start.

    Anyway, in compatibility mode you can install Vista and XP without the SATA drivers. This should t be a problem.

    But do you know the difference between compatibility and AHCI? AHCI mode is faster and therefore I would recommend this mode.
    Like you said Vista you can already install in AHCI mode and for XP, you need Intel Storage Manager. This package includes the SATA drivers you need and here is a step by step guide to use these drivers:
    http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

    Last but not least, you can install 2 OS. You can do what you want! ;)

  • Satellite P200 - after the BIOS update I can't start the machine

    After the BIOS update I can't boot the laptop because the system doesn't recognize the relecommunicarions password.

    Before updating the password is 0000.
    After when I try to set the password incorrect password start apeeras

    The BIOS password can only be removed from an authorized service provider. So I think that there is no other way.

    On the Toshiba site, you can search the nearest:
    http://EU.computers.Toshiba-Europe.com

  • Satellite C660 - 13r PSC0LE - BIOS update problem

    I bought the Satellite c660-13r 11.05.2011

    After installing and configuring Internet conection, only he had messages on the Bulletin Board, NEW BIOS update the bios of the laptop of TOSHIBA BULLETIN BOARD. I updated the bios to 1.30 without any problem,

    NOW I HAVE A BIG PROBLEM.
    1 POST takes 30 sec,
    2 start windows is slow
    3. laptop is so slow I can cry!
    4. when I open the new window or klick simply open the new link, stay for 3-4 sec

    and I must ask, how is this posibile, when I open HWSetup, in the menu start-> toshiba-> utilytis
    I can see the BIOS. 08/04/2011 I can send screenshots of version 1.40

    How can I flasch BIOS with other versions,
    His big problem to work

    Thank you and I hope you can help me...

    Hello

    The version of the BIOS should be mentioned in the BIOS settings.
    Turn on the device, press F2 and verify the version here.

    Also I recommend the settings of the BIOS back to default settings.
    In the BIOS settings, you will need to press F9 to get the default value. Then save the changes and exit the BIOS.
    Restart the machine and check how many processes are running in the context of the BONE.

    I recommend disabling of certain non-essential processes in msconfig.
    There, you can go to the Startup tab and could uncheck the unnecessary process.

  • Satellite A30 - after the BIOS update I can not install any OS

    Hey everybody

    I have a problem with my laptop Toshiba Satellite A30 PSA33E. I update my old BIOS and 1.7 and now I have a problem: I can not install any OS on my PC because it stops whenever I try to install. After 50 tests, I installed a Windows SP2, but my PC turns off always.

    My CPU is at 100% after I launch mozilla so I guess my problem is the BIOS. I try to install v1.8 BIOS and is not working and I get an error (not compatible with the installed BIOS)

    Where can I find the 1.3, 1.4, 1.5 ROM BIOS? Can someone help me please?
    THX

    The latest version of the BIOS should not cause this kind of thing. Have reset you the BIOS to its default settings?

    Have you checked the CPU radiator for an accumulation of dust? A can of compressed Air can help remove dust through the vents.

    What was the reason that you updated the BIOS, in the first place? Had previous problems with the system?

  • Satellite U400 - after the BIOS update I can't start Windows

    I have laptop Toshiba Satellite U400, PSU44E and Win XP. After you have installed the new BIOS v. 3, 80-WIN32, it is not possible to start Windows, it always ends in restart. It is also not possible to reinstall Winsdows, as it always ends with the blue screen.

    Any help or suggestion?
    How can I install back my backup BIOS BACK?

    Hello

    Did you really choose the good BIOS for your laptop? Because on the Toshiba site Web are different models U400 has so you choose for PSU44E BIOS on Toshiba page?

    After the BIOS, you should load the default settings in the BIOS.
    Did you check that?

    A downgrade from the BIOS is not possible. This is possible only from an authorized service provider. So, you should contact them and ask a technician for help. I m sure they will help you. ;)

    Good bye

  • Satellite L755 after error - BIOS update service is not a warranty case

    The problem began when Toshiba Tempro program notified me that I need to update bios for my laptop Satellite 755. I have downloaded the file to the Toshiba site, followed all the instructions. The process - there was error check. Tried twice. The same result. Decided to not update at all.

    But after that the next reboot of the laptop has not started. Black screen, cooler works like breathing.
    After searching the Internet I found there are hundreds of people with the same question. Which of course was not my fault.

    As there is no solution for this - the only way was to send the Toshiba laptop service.
    I wrote them a letter before, provided all the details, what happened. Also asked if it would be covered by the warranty. My laptop is still on warranty, purchased just half a year ago.
    Received an email from to SAV (Damax AG), I have to send my laptop and that * it's still on warranty *.

    Without any hesitation I sent them my laptop.

    After several days, I received a note that:
    1. it is not a case of warranty I was updating the BIOS. Come on guys, I wrote it you before I sent the laptop!
    2. for the repair of motherboard, I need to pay 1350 (!) swiss francs (the price for the new laptop is about 600 Swiss francs!).
    3. I can refuse the repair, but in this case, I still have to pay 100 Swiss francs for diagnostics.
    Why the hell should I pay for the diagnosis, even if the laptop is still on warranty + it was pretty clear what the problem was, like many people in the face of that, and Toshiba service for sure shoud be aware of this problem.

    What could advise you in this situation?
    These are the sons of the same question. I'm sure this is the problem on the side of development of Toshiba.

    http://forums.Toshiba.com/T5/drivers-and-utilities/satellite-L755-S5216-BIOS-2-0-update-leads-to-quot-verify-error/TD-p/203226
    http://forums.Toshiba.com/T5/computer-troubleshooting/laptop-L755-dead-after-BIOS-install-attempt/TD-p/205326
    http://forums.Toshiba.com/T5/system-recovery-and-recovery/BIOS-L755-beware-of-Toshiba-fix/TD-p/270171

    Also, there are many cases that people have written that it is covered by the guarantee - which was one of the reasons that I sent him. For example here:
    http://www.theeldergeek.com/forum/index.php?showtopic=45500
    The guy writes: + "guarantee-box...". 0, no data not deleted, everything goes well =) ' + '.
    How even a service covers it - the other is not?

    Also, I read the guarantee agreement - I have found no info that this case is not coverable.
    Really frustrated by all this, I am a student, and of course I don't have extra 1350 francs to pay for it.
    Also, I'm really screwed as it has research papers which I can not finish normally like all my data on the HARD drive.

    Hello

    Please don t get me wrong, but I don't really know what you want to read here. It is user in the forum and here you will not find an official statement here. All you can do here is to share your experience with others who have the same problem.

    I put t know how many services are listed for your country, but please try to communicate with other services and see if they will tell you the same thing or maybe there's something now about this BIOS problem.

    If you have more information, please report it here. It may be useful for other owners of L755.

  • Satellite L300 - after the BIOS update I have a black screen

    Welcome! I have a big problem.

    I improve my Satellite L300 BIOS to the old version that I download on the official website of Toshiba. I turn on the update program and after about minute, the system will shoot down and on the screen I see black screen only. The light on the drive flashes green and the led in the DVD-ROM flashes orange. I have no idea what's going on.

    Please help me!

    Hello

    It sounds like this during the update of the BIOS, that something was going wrong. I think that the ROM module must be reflashed or in the worst cases, the motherboard should be replaced.

    In any case, you should contact an ASP for help. Technicians can try to reflash the ROM module and solve this problem.
    If you don't know where is the nearest ASP, you can search on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good bye

  • Satellite C660 - 2JN PSC1ME BIOS update of confusion

    Hey,.

    So I'm overhauling a C660-2JN, room PSC1ME-01L00KEN, and after you install a clean Windows I got the latest drivers for everything and went to check out the updates to the BIOS.

    If you visit the page of the 2JN and pass to the driver section there is a list of BIOS: [v1.50-WIN | http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=UK&selCategory = 2 & selFamily = 3 & selSeries = 313 & selProduct = 6019 selSh 3010 = ortMod & language = 13 & selOS = null & selType = null & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 8 & selectedLanguage = 13 & type = null & page = 1 & ID = 80880 & O SID =-1 & driverLanguage = 42].
    It's the BIOS that is already installed.

    Now, the confusing bit is if I try to find updates via the [page 'Update your BIOS' | http://uk.computers.toshiba-europe.com/innovation/download_bios.jsp?service=UK&banner_id=BIOS_DOWNLO AD_BANNER] display two new results for the C660 - 1, 70 and 2.00.

    I say "for the C660" because the part number of this machine does not exist in the drop-down list below, so I'm not sure how wide of a search, I really do.

    I extracted all three packages and they use all the different flashing and Roma of different sizes, so I think that the most recent are for different machines spec'd, but it would be nice to know (and, well, maybe the list part numbers compatible for stuff like the BIOS that can brick your machine? I mean, all three have same identical single generic descriptions.)

    Incidentally, on this machine product page header says it is discontinued, yet it [does not appear in your list of discontinued products | http://uk.computers.toshiba-europe.com/innovation/discontinued_models.jsp?service=UK].

    Thanks to all who answered my question.

    Beautiful ;)

  • Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

    I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

    But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

    Can someone please help.

    Hello

    Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

    What code you get BSOD?

    After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

  • Satellite A500-138 60 fps instead of 99 fps after the BIOS update.

    Hello!

    Before I have a little problem with my fan, but I do it with the BIOS update. His work!

    Now, I have a little problem of different...
    I am a player of counter-strike and before the BIOS update I have 99.9 FPS now, I have about 60... Who is wrong?

    Its make me crazy...

    Hello

    Seems the CPU and GPU don t run full implementation after the BIOS update.
    Any performance CPU/GPU leads to lower the heat dissipation and this means that the cooling module does not need to execute quickly and very often.

    Check to see if you can change an option is the BIOS.
    You can also try to update a graphics driver and could control Windows 7 power management.
    Power management settings 7 victory could affect CPU and GPU performance to save battery power and reduce the heat dissipation.

  • Dead by Satellite A200 - 1 c 3 after involuntary Bios Update

    Dead by Satellite A200 - 1 c 3 after involuntary Bios Update!
    Help, please!

    Hello

    It's a shame, but it seems that you need a help of a Toshiba ASP. technicians
    In the best of cases, only the ROM module must be flashed once more in the worst case that the motherboard could be damaged. :(

  • Satellite A500 - it gets stuck one second after the BIOS update

    I knew I shouldn't update BIOS unless I have problems. A message came Toshiba Bulletin Board and I was stupid enough to trust him and I have updated my BIOS. The update has been successful, my computer seems to work very well.

    Except, now when I try to watch a movie, I downloaded every 10 seconds or if it gets stuck for a second and then plays normally and it happens when I play music on itunes. Because I didn't have this problem before, I'm not accusing the update. Is there a way I can go back or how can I return to normal?

    Oh God, what have I done? :(

    You can try to update a sound/display drivers on the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] Bios update should not cause a problem like yours, but who knows... (You can also try to load the default settings in the Bios)
    Updated version of itunes and try how movies on VLC and Kmplayer

  • Satellite C660 - cannot install BIOS 1.50

    Hey.

    I just bought a new Satellite C660 24 hours. I have installed all updates and programs for the PC to run more smooth, but I can not install the Bios 1.50. It gives me an error when I try to install it.
    When I go to see the latest version of the bios it say it is 1.20.

    How can this be repaired?

    See you soon.

    Hey,.

    Why do you update the BIOS? You have problems with your new laptop C660?
    I mean the BIOS update is always a bit risky, so I just wanted to update so it s really necessary, otherwise the BIOS update is not important and you can forget it.

    Just have fun with your new laptop computer and enjoy! :)

Maybe you are looking for