Re: Satellite C660 - black screen

Similar Questions

• Satellite C660 - black screen after upgrade memory

  Can Hi anyone please help

  try to upgrade the ram on my C660 account currently 3GB - talk to Toshiba and they told me the type to get and said im running 64-bit windows, I could go up to 8 GB - then bought the following

  DDR3 1066 MHz sodimm - x 2@4GB---de MyMemory.com (£64)

  When I mounted it and turned on the screen is all black.
  Anyone has any ideas please im in the middle of my assignments aaaaaahhhhhhhh!

  And any help would be really appreciated

  John

  Hello

  Looks like not compatible or faulty module.
  You can start the laptop properly using the old modules?
  If Yes, then the new memory should be replaced by another.

  I recommend modules Kingston I think they make good quality

• Satellite Pro C660 - black screen and a cursor flashing during startup

  When my laptop start, after it shows the press f2 or f12 and then from windows, it goes to a black screen with the cursor blink.

  The lights are on at the front, but there is no activity on the hard disk, such as the indicator light does not blink.

  Need help. Thank you.

  I think that your HARD drive is dead.
  You need to replace the HARD drive with a new 2.5 SATA HDD.
  Replace the HARD drive and install the OS by using Toshiba recovery disc.
  I hope you ve created one in the past

• Satellite A200 - black screen of death

  Hi all

  I have a Satellite A200 PSAFCA-01K00J model. This model, I bought Harvey Norman in Australia, but I can't find any registration on the web site of current Toshiba or abandoned. This sux because I am looking for any bios updates available to address a recent black screen problem.

  The first time this has happened that I was able to reboot after removing the battery/cut the current to several times before its good. The next day, after an attempted works to install Kaspersky Anti-virus update the same problem... Power disconnected, removed, deleted drums (replacing the cylinder one and then the other to check the faulty ram memory cards) of ram and hard drive and then bled off residual tension with start button. Through this process several times before finally successful. I had to pass by it a few times since after restarts automatic windows updates, etc. I extracted the procedure to manually reset the bios by jumping it, but it's something I want to avoid doing this until I've exhausted all other options.

  Toshiba Satellite A200
  Model - PSAFCA-01K00J
  O/s - Vista
  Hard Drive - 160GB with 50 GB of free space remaining.
  System 32 with proccesors core duo. (intel)
  Bios Version/Date-phoenix Technology Ltd 5.20, 25/10/2007
  SMBIOS Version - 2.4

  Any idea of sourcing on the last correct bios or any other input gratefully appreciate it... :)

  > Black Screen Of Death
  What happen exactly when you start your laptop?

  By the way: I ve checked the download from Toshiba on http://www.mytoshiba.com.au/support/download page and can not find this old model of laptop. I don't understand that Toshiba to THE is some archives for old models like on the page of European support.

  Anyway, I don't think that BIOS is the reason for this behavior.

• Satellite C650 - black screen after BIOS update

  My Satellite C650 Windows 7 - won't start afte BIOS update / switch.

  Everything worked very well until the automatic update of Toshiba asked me to download and install the new BIOS update, I did. At the same session Windows and McAfee asked updated. I agreed to all. After all updates have been installed, turns off. The next day when I walk, I see only black screen. I also tried F2, F12 and drive recovery. Nothing happens!

  Any recommendation?

  Hey,.

  It seems that something was wrong during the update of the BIOS and so that you can t the computer unbootable. But I put t understand why you did the BIOS update. If everything works correctly, you can forget about this update. More if you do a BIOS update you shouldn't t run any other updates or programs that might affect the update of the BIOS.

  Anyway, in this case you can do nothing and you need professional help. Please contact an authorized service provider and guys can help you update the ROM module On the Web from Toshiba site, you can find a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite A300 - black screen after long race

  I have Toshiba Satellite A300 1 portable PC series since 2008.

  It worked fine until the last few days. 2 days back when I started, it works fine until I go to bed (about 4-5 hours).
  "" I put my computer on and I slept, when I woke up in the morning, seen the button works / stop light is lit, "plugged in", "lit", "battery" all the lights are on but black screen of the tower.

  I moved the mouse, you press the mouse, press the SPACEBAR, enter keys on the keyboard, but nothing of this fact the live screen.
  I checked the fan works and the machine is hot normally.

  I noticed the CPU/HDD LED does not blink, the fact does not illuminate.

  The day before yesterday was also even, but after that restart was again very well.
  yesterday also repeated the same thing.
  Today also repeated the same thing.

  Please note my power saving mode: hip - turn off monitor - 1 minutes, turn the HARD drive - never.

  This setting is for last 2-3 years and normally off the monitor used to live on the movement of the mouse / key pressing.

  Can someone please help me figure out why my screen goes black after a night or more running morning.

  Thanks in advance

  Generally screen should turn off, but the laptop must continue to work.
  It is not easy to tell what happened.
  Can happen that laptop did restart because of a windows update installation?
  Some applications are active during the night? Some download or something similar?

• Satellite L655 - black screen when power on

  My Satellite L655 became black last night... now when I go to turn it on, it goes through the movements but only a black screen after booting in safe mode.

  Any suggestions?

  Stand by. Why safe mode?
  What happen exactly when you press the power button / stop?
  See Toshiba welcome screen? If Yes, what will happen after that?

  Try please enter the BIOS, the default settings and try again?

• Satellite C660 - white screen after reboot

  I closed my laptop Toshiba Satellite C660-22V. I restarted immediately, but the screen is blank. The laptop was always well done loading noises it is.

  Any ideas on how to solve this problem?

  Have you noticed this for the first time now?
  Any reaction if you press F2, F8 or F12 at startup?

• Satellite M70 - black screen on startup

  Hello!

  I have a problem with my Satellite M70-309, so for two times after logo Toshiba, Windows Xp (home sp2) does not start.
  The result is a WHITE & BLACK SCREEN.
  So I turned off manually appeared then black screen where I can choose if starting normally, last good configuration etc...

  That's happened?
  Is a hardware problem? Because my cpu died last month I changed it.

  Thank you!
  (Sorry for my English I'm Italian)

  Hi, RSC

  It is not easy to tell what can be the problem, but I assume that there is something wrong with the HARD drive. It will be interesting what happens with the new HARD drive.

  If possible also start the recovery procedure to see if the HARD drive will be recognized correctly and if the recovery procedure starts correctly. Check it using the installation in expert mode where you have access to information from HARD drive (partitions and so on).

• Satellite L550 - black screen with mobile cursor on startup

  Hello world

  I have a Win7 of Toshiba Satellite Pro l550-17u with a startup problem, black screen with a cursor, but not going beyond.

  Tried to reset the default values on initial F2 menu configuration
  Tried to boot in safe mode and the safe mode with networking
  I tried Repair computer option
  Tried the restore advanced user
  Tried to load the recovery disk
  Tried to boot the laptop directly from the disc
  Tried to remove the battery, but made no difference

  When I get the white screen with the cursor, I tried a few things mentioned.
  Ctrl + alt + delete to get the Task Manager, but nothing.
  Pushin' Win + R to open the Run dialog box, but it does not work.
  Click on SHIFT 5 times quickly to get ticky key opened to get to the Control Panel, but it did not work for me.

  Last night did not turn on my laptop turned off but when opened I received a message that my system has recovered from a serious error, you click on close and then it turned off my laptop had this problem since.

  Next step i think I can reinstall the memory but don't really want to start taking it to bits.

  I also have a large amount of data I really want out of the hard drive. any suggestions?

  Any help or suggestions much appreciated

  Hello

  To be honest, for me it looks like a Windows problem. Maybe something messed with the registry and Windows can start t more

  I think that you must restore windows recovery disk Toshiba you wrote that you have tried to load the restore disc but what happened after that? Can start the installation of recovery? If so, you should do this.

  Backup, you can do if you buy an external HARD drive enclosure. Remove the HARD drive and install in the case of HARD drive. Now you can connect to another computer.

• Satellite A200 - black screen when restarting

  I have satellite A 200 and I have the problem that when you restart, I have only a black screen and goes no further. But I do not beep. Only available in one place. I tried everything, but nothing puts the order. I tried to install Xp, but it does not work. Help.

  Hello

  You mean you don t nothing appears on the screen during startup? Not even the Toshiba splash screen?
  Is you can access the BIOS?
  Please check this box.

  You can also check this; Remove the battery and unplug the AC adapter. Wait a little (1 hour), then after this period of time the two parties again.
  Then try to start.

• Satellite P200D - black screen and does not just by running

  Hello everyone, I have a Toshiba Satellite P200D - 107 PSPBLE with configuration set-aside:

  Processor: Turion x 2 TL - 52 64-bit clocked at 1.6 Ghz
  Display: 17.3 inch
  Graphics card: Ati radeon x 1200
  RAM: 2 x 512 MB ram (1 GB total) which I upgraded to 1 x 2000 MB and 1 x 512 MB (for a total of 2.5 GB)
  OS: FACTORY CD WINDOWS VISTA HOME PREMIUM 32-BIT
  Power: Running on the direct power without the battery cable

  Although the pc is quite old sound fundamentally new barely there 1 year of normal use on it.

  PROBLEM:

  The screen goes black (no), even if the screen still has the backlight running, the laptop is still under tension, but its basically in a kind of deep hibernation with the fan running yet.
  The laptop screen turns off 5-10 minutes after windows loads, even if in idle, it also stops during installation of the operating system.
  I tried to run the music and the music stops when the screen goes black made all the hard disk activity which I believe indicates that it is not related to the video chip.

  TRIED SO FAR:

  1. open up the computer laptop and cleaned all dust processor, now CPU temp is 50 max, even for hard disk
  2. update the bios to the original to 1.70 - did not help
  3 connected external monitor also stops it the same time as the laptop screen indicating it is not not a screen issue
  4 reinstall OS several times
  5 tested memory with memtest64 - no error
  6. test the hard drive with hddregenerator - no error

  What I've noticed:

  If I leave just a 512 MB of ram in the laptop then the laptop stops not at all even in windows applications, tried to launch a game to remove video card and it works without problem for hours, but as soon as I add the stick of 2 GB or another origianal 512 stick it will go inside the black screen 5-10 min (or earlier) to get into windows.

  He never stops in dos mode (as in memtest, hddregen) even with 2.5 GB of ram.

  After that the screen goes black, if I stopped and then try to save, it it won't work at all, the screen stays black with the fan spinning and boot CD, I must absolutely disconect the power cord power and re - set before it starts again.

  Anyone has any ideas, I am experienced with the pc, but have never stumbled upon something so weird that I have just can't explain this problem that came straight from heaven.

  Toshiba to wake up, this forum is a total joke, you would think that you would be able to afford hiring a bunch of technicians to actually help people rather than rely on the users of the forum to do your work for your, you don't need to have a forum, if you don't have the staff to actually help people solve their problems.

• Satellite A200 - black screen with two beeps

  Date: October 17, 2009

  I have Toshiba Satellite laptop computer * model A200 PSAFCA-01400J *. I am facing a problem of * completely black screen * (I can't see any image either). It happened twice more than the screen wouldn't turn on by moving the mouse or the touchpad. To turn on the screen I had to restart the computer. The screen worked well until it turns off again. Since it does not turn on even after I restarted my computer several times. I noticed that my * Windows vista home premium * load properly I can hear audio that indicates that I am ready to open a session. I also noticed the sound signal after slipping my finger on the sensor attesting that I connected successfully, but the screen remains black.

  When I turn on my computer, I noticed that it sounds two beeps, first beep is short and the second beep is relatively long. I tested the cover closing the cover switch and noticed that my computer goes into sleep mode and by opening the cover that Eve turns off and my computer turns on again; but the screen remains black. One of my friends suggested that the backlight of the screen inverter or the lid switch is defective. Can someone tell me what could be the problem and what do the two beep codes?

  Thank you

  Hi mate,

  Normally the beep codes at the start of average that it s something wrong with the hardware of your laptop. As Akuma said, maybe the graphics card or RAM must be replaced or other parts too.

  Have you already tried to connect an external monitor? You can see a picture on this subject?
  I don't know but maybe what he s m only internal something wrong with the monitor.

  In any case, I think you should contact a service provider for help. Technicians can check the laptop and fix it for you.

  Welcome them

• Satellite L300D: black screen during boot - stuck on classpnp.sys & repair

  Hi I have 3 year old Toshiba L300D.
  1 year back I upgraded vista to windows 7 Home premium.

  3 days back I had problem - my windows start page was hanged and was not forward, also all types of safe mode was stuck on classpnp.sys.

  After reading many forums, I started with USB (with windows 7) and use command prompt and all 'pcmcia' realted deleted files from drive C. Now using function F8

  I can't use any option (all the safe mode option, low resolution, restarting, etc. doesn't work, even in the Bios configuration changes will not work). Also now start my PC with USB, after the start of the windows black screen page appears with the white arrow and it will not go further this black screen so I can't even use now guest & installation option.

  Now, I don't know what to do :(
  Any help will be appreciated :)

  Hello

  The classpnp.sys seems to belong to «service Plug & Play of Windows 7»
  Connect USB devices to the laptop?
  Try to start the unit without the connected USB devices.

  In the worst case, you have to reinstall the OS using the recovery disk if F8 and all other Repair Options would not work.
  But in my view inevitable painful s

• Satellite A300 - black screen, Win7 is not booting

  I was working on my Toshiba A300 when suddenly Microsoft Security Essentials detected a threat, after cleaning it asked me to restart my laptop, after restart, it shows only the TOSHIBA screen with F2 and F12 options, but after that, else nothing happens. There is only a black screen, not even a cursor or anything like that.

  Nothing else happens, I tried to insert Win 7 bootable disc to repair the operating system, but my laptop does not seem to start through the drive, I checked the boot order in the BIOS settings, but still nothing, it does not accept the disk/USB nothing at all, it is not even go into safe mode by pressing F8 key continues to beep when I press any key regularly , I'm stuck & useless what to do, kindly help.

  It seems that the system on the HARD disk has been confused upwards and you will need to reinstall new OS.

  > I tried to insert Win 7 bootable disc to repair the operating system, but my laptop does not seem to start through the disk
  Insert the floppy disk. Then power on and press F12. Now, choose ODD (optical disc) as the boot device and press ENTER.

  The laptop boot from the CD?
  If this isn't the case, you should check if the laptop could start from any other bootable disk. This is necessary because you need to know if his problem of disk problem drive or an optical disc.