Re: Satellite C660 - One USB does not work
Hello
As the title says, I have a c660 that has only a working USB port. The other is dead and has been dead since day 1.
I tried to uninstall the USB controllers, re-boot and allowing the automatic hardwarediscovery run and install again. This has not solved the problem unfortunately.
I am running windows 7 by the way.
Another had a similar problem or has any ideas?
Thank you
TFM
If only a single USB port does not work and if the other is OK then I think it is a dysfunction of the USB port and not related to any software.
So in this case, I think you should visit the ASP from Toshiba for a verification of the motherboard.
The USB ports are part of the motherboard and possibly you need new mobo.
Tags: Toshiba
Similar Questions
-
Satellite Pro 4270 - USB does not work
Hello.
I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.
I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.
The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.
IrDA works very well.
Some suggestions please. Thank you
Hello!
I understand, were you solder the module USB motherboard and then solder another module?
I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...
Best regards
Pete v.
-
Satellite C660-121 - WLAN does not work
Hi all
I have problem with Toshiba Satellite C660 - 121.
I installed new windows, and now my wireless does not work. I downloaded all the drivers LAN, WLAN etc. and WLAN will not work, I put the internet cable in the laptop, but not by cable or WIFI internet connection: S
Please can someone help?
Edit: in the Device Manager, NETWORK CONTROLLER is not installed, but I can't find that anywhere and I can't find any Wi - Fi network!
Which Windows version have you installed on your laptop satellite?
At first check if the WLAN and LAN card card are installed and registered correctly in the Device Manager?
If Yes, you must enable WLAN card by using the FN + F8 key combination. Can you do this? -
Satellite C660-108 - Wireless does not work
Hey everybody,
New to the forum, I had to sign up because of a problem with shame. I would like to apologize in advance because I know nothing about how computers work.
I have a toshiba satellite c660-108, windows 7 OS. Yesterday I was updating it and I used it very well after that I restarted. He stops and went to bed. Today, I turned on and he did a system restore, don't know why. So all went through and then it wouldn't connect to the internet wireless, only ethernet cable (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=69127&tstart=0 - same problem as far as I can tell).
I'm in the middle of my diploma thesis and word does not work now, so I did a full factory restore hoping everything would be ok. This isn't.
Ive tried to download the driver toshiba wireless, just didn't work. It currently downloads Realtek but I'm sure it won't work either.
How to get another wireless network card?
Any help would be appreciated.
Thank you
James
The essential is that you it works again.
So congratulations. :) -
Satellite C660-1NW - Webcam does not work with the facebook chat
Hello
My doughter recently bought a Satellite C660-1NW youcef.
This laptop has a webcam on board.
When you use Facebook, webcam chat, webcam does not work.
The webcam indicator led is active come on, but the facebook app remains blue without screen webcam.
Audio works.Skype using the webcam works.
I have updated the drivers but when same no go :(
Please help move facebook webcam
Greetings,
PPHello
If Facebook does not recognize your webcam right away when you want to share a video, click on the eye for cameras new button.Your Adobe Flash Player settings will be displayed.
On the tab, make sure you only select the right type of camera you use with your computer.On the tab, you may also need to 'allow' Facebook to access your camera and microphone.
If your settings does not work, try to uninstall Adobe Flash Player on your computer and download the latest Flash Player.
-
Satellite A200 (PSAE3) - USB does not work
I use the Satellite A200 (PSAE3). I often set and turn off my mouse and then my USB port does not remember my mouse.
But when I use the other mouse it works normally.Please help me my friends.
Then the mouse must be strange somehow. What are you using it?
To be honest, I can't imagine that you will have this problem with all modern external mouse and new USB. -
Satellite C660/C660D - Webcam does not work
I recently got the Toshiba satellite c660/c660D laptop for my 21st birthday in July. It is said there is a built-in webcam, but I can't see it or find it. Also when I try to use videoconferencing on Skype, he said that it is not important which web camera connected.
I was wondering how I can get the web camera work? Any help would be greatly appreciated. Thank you
What operating system do you use?
When you open Device Manager check please if webcam is in the list. You can find it under imaging devices.Also check the BIOS settings. I'm not sure but maybe webcam is disabled it. Check it out.
-
Windows 8 Upgrade, Toshiba Satellite C660 Matshita DVD does not work error code 19
I just upgraded my Toshiba Satellite laptop to windows 8 and having a problem with my Matshita DVD-RAM UJ890AS. In Device Manager, I got the error "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). Now, I tried to change the registry, but it shows no upper or lower to remove, I also uninstalled the driver and re-installed and I used the automated microsoft fix dvd all to nothing does not. Windows troubleshooting tool shows the problem but can not solve? Help me please!
HEALED!
All you have to do to avoid this error, code19 is to uninstall Toshiba Recovery Disk Creator and Toshiba Recovery Disk reminder. I thought that it had been uninstalled before that I've updated but I was wrong. I just uninstall both and hey presto it works :) -
Webcam on the Satellite C660 - 18 c does not work
Laptop does not detect webcam even after I installed the driver (I think).
Do I need anything else, any ideas where to find the webcam settings? IM on windows 7, 64 bitHelp please, thank you.
Post edited by: airidas_1
Post edited by: airidas_1
Cam is detected when you use the laptop with factory settings (original preinstalled OS that you got with your laptop)?
-
Satellite A60-174: USB does not work
Hello I do not know if this message correctly this time... and I first apologise for my bad English speaking please.
I just bought a second hand Satellite A60-174 (without installation CD). It has been completely formatted and installed again before the sale, but bad (some drivers were missing).
I now have a problem of USB ports. Do not connect devices such as a mouse or even a 'simple' external HARD drive, but to connect to another external HARD, a multimedia disc: TVIX 3000 and a tablet/hub USB (powered by USB labtop) ventilation.
I tried an update for the drivers of USB ports, whenever I am asked to give a CD, no update via windows update (when I configured correctly update windows in system properties).I see in the control panel:
-PCI to USB host controller standard scope
-OpenHCD... two USB host controller standardBut after executing "Myconfig.com" gives the results
-ATI techn... Inc.: OHCI USB Controller #1 and #2
-ATI Tech... Inc.: EHCI USB controller
-ATI Tech... Inc.: SMBusWhy this difference?
Don't you think that it is the motherboard driver? If so is it possible to update it without having to format and reinstall everything?
In the list of drivers for the A60 (PSA60E) it is controller EHCI driver, or driver of motherboard.
Thanks a lot for the other answers youy
PS Some useful information:
Operating system XP Pro SP3
BIOS version 1.70
SMBios version 2.3 (?)
Chipset North bridge ATI Radeon 7000IGP
Bridge South ATI IXP 200Post edited by: anne34
Hello!
Do you have the yellow marks in Device Manager?
On the Toshiba site is the order of installation, drivers must be installed in step by step. I think that the display driver contains the driver for the motherboard. If you need to install these drivers.
And Yes, the information in the Device Manager and myconfig.com are the same.
I think that there are one or more missing driver. To verify the installation if instructions you have installed all the drivers.
Good bye
-
Satellite P10-304: USB does not work after the upgrade to XP Pro
You just bought a satellite SP10-304. Beautiful machine, but comes with XP Home edition. I've updated to XP Professional but seems to have lost the USB Ports. Device Manager indicates that they are working, but plug 'all' USB devices produces no reaction/recognition.
Any ideas, please? What I put in the recovery disc and go back to XP Home?
Thank you
Ian
Have you installed Microsoft all MS on this unit?
I recommend that you install all updates.Win XP Home uses the same drivers as WinXP. In this case, everything should work without any problems.
-
After the recovery with CD Satellite C660-1FE keyboard does NOT work
Hello
A month ago I bought a Toshiba C660-1FE. After three weeks my HD broke down. I bought a new HD from Western Digital and I replaced the broken HD. I did a recovery of my HD image, so I had to order the recovery disks of the product on the Toshiba site (3 disks, which drive 1 and 3 were the only required for installation).
Now I have the problem that my laptop keyboard doesn't work. I am currently using a USB keyboard and a mouse to replace my keyboard and the touchpad of the notebook.
The keyboard of the laptop works fine in the BIOS. Therefore, I hope that it's just a driver issue.
I have:
tried to find and install a lot of pilots since the toshiba site, no results.
tried to change settings in the bios (usb enabled).
tried to fix the problem by reinstalling all of the computer repeatedly.The keyboard seems to work until windows loads. When the system is switched on I can press caps lock and num lock and the green lights will turn on. All this stops working once windows starts is displayed.
Perhaps another problem in Device Manager: under the graphics card, 2 subcategories have exclamation points: it says Mobile Intel (r) 4 series express chipset family twice! I can't seem to fix these with the drivers I can find either. When I check the settings I have this message (google translate since it is in Dutch):
+ Digital signature for the drivers for this device is necessary, cannot be verified. Possible after a recent hardware or software change a file that is installed signed incorrectly or damaged, or malicious software is installed from an unknown source. (Code 52) +.
+ You must restart the computer for this change to take effect. + (obviously I've tried that too)
Can someone give me it please help? I'm at the end of my intelligence.
Sincerely,
Daniel
Hello
Keyboard works in the BIOS, it means that the keyboard material should be ok and the connection between the keyboard and the motherboard is established.
So, what could be bad? Keyboard driver?
Hmm, the keyboard driver is part of the Windows operating system and is installed automatically during the installation of the OS
I would recommend following:
Go to Device Manager and remove the keyboard point.
You should see something like PS/2 standard keyboard
If you see a red x next to this unit, then it means that the keyboard is disabled.
Usually, you should be able to activate this again (in Device Manager).
If there is no Red Cross, so I you would recommend the deletion of this keyboard in the Manager list of devices, then reboot the laptop. Usually, the operating system should recognize the device automatically deleted and should install the driver too.Select this check box.
By the way: it is possible that you received a recovery disk wrong which could explain the problems after the recovery procedure
-
Satellite C660 BIOS update does not work
I downloaded the bios-20120613151531 and extraected in a folder with the same name.
But I don't see the list as indicated in the instructions, but I see only "BIOS_V200_WIN.exe".
Double click that gives:
Install UEFI WinFlash 0.02 - this program will be closedWhat should I do?
> But I see only "BIOS_V200_WIN.exe".
It is also a zipped package
You should unzip the BIOS_V200_WIN.exe by right-clicking and choosing extract here.
Now you should get the other files. -
trial LR 6 cc import goes well with different cards, that one card does not work, usb HDD with only images, map 9571 115GB, sometimes only 300 photos pics, then wait all night nothing, try separate subfolders, only two subfoldrs(including subfolder) done well, 175, and 125 peaks, other subfolders doesnot work, opendLR as administrator : no difference. I7 import about 60-70%. on the import of only about 300 visible pictures, the other empty square. solution?
Hi willemm,
first instance LR 6 cc import goes well with different cards, that one card does not work.
Could you please develop the issue you are facing?
What is the image format you import?
USB HARD drive with only images, card 9571 115GB, sometimes only 300 photos pics
I would not recommend to import gb 115 library at once.
Kind regards
Assani
-
Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!
Hello
Check with Toshiba support, online documentation and drivers (update or reinstall), and
ask in their forums.Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp========================================
How to activate Audio devices hidden in Vista and Windows 7
http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.htmlConnect one microphone, music player or other audio device to your computer (you want to be sure
the mic input is enabled)
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer-----------------------------------------------------------------------------------------------------------------
Pilots may also need to be updated:
Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
Audio (this is an example and you can have an other name/maker).Make sure you write down the description and model double click top - tab drivers - write version. Now
Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.If your driver shows 06 you have the default windows and part of the question.
Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
Put them - right click on Reboot - RUN AS ADMIN -.Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
and then install the latest version. Restart and check after each test, not
rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
installed shows upward on the tab of the driver.
Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html---------------------------------------------------------
After the updated driver.
Click with the right button on the speaker near clock - recorders - right click in the box - check see the
Disconnected devices and show disabled devices - check your micro - highlight
then on lower right properties. Make sure that the appropriate injector is selected and check
other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
is the RealTek Audio Manager, yours can be quite different name if you have one.How to activate Audio devices hidden in Vista
http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.htmlConnect one microphone, music player or other audio device to your computer
http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspxProblems with sound and audio or no sound - a Mr Fixit
http://support.Microsoft.com/GP/NO_SOUNDI hope this helps.
Maybe you are looking for
-
Airport Extreme 802.11ac - I have a defective router again?
Dear Apple friends, I reduced a problem with my Airport Extreme 802.11ac wireless router which I hope someone can shed some light on. Things I've tried: Hard reset Factory full reset w. of new settings. Two different Apple ID (account iCloud) Connect
-
Close VISA afer read property VISA?
I have a VISA of TCPIP in my application and I found that if I call 'Close function VISA' after reading the property of VISA, my application will generate some problems. Please see the attached picture. Because it means that even if I do not open bef
-
Problem connecting Bluetooth C720
Bluetooth discovery working again AT & T merger 2 C720, but said then the password/PIN invalid Bluetooth C720. I find no way to access it or know what valid pin can be. Any response?
-
Printing front and double-sided with L7680 and OS 10.6.8 problems
I upgraded from OS to OS 10.6 10.5 and couldn't print front. I couldn't find something from the front-back to the front. Then I updated my drivers of HP using HP_Installer_Officejet_Full_Group08_10.3 Now I see a two-sided box. Prints fine duplex. But
-
I have a photosmart HP, model B210a and not produce. CN216A bought September 2011
I got UVerse installed my printer on and offline intermittently even if the new router address was put in the printer. Now, it seems to be permanently offline and the screen bed that my ink cartridges are missing or damaged if they are full on an on