Re: Satellite L20-112 - WLan does not work after installing Win XP

Similar Questions

• Satellite Pro U400 - BT does not work after installing Win 7

  Hello.

  I have a problem with my bluetooth device. I have Toshiba Satellite Pro U400.
  My previous operating system was Windows Vista business and I just replace it with Windows 7.
  Since I installed it my device Bluetooth does not work anymore.

  I have had no problems with it with my previous Windows.
  Now, the following messages will appear: "Bluetooth stack for windows by Toshiba is incompatible with this version of windows" I have windows 7 Professional.

  I tried to update the drivers, but I was told that I have the best and latest drivers.

  Can someone help me?

  Hello

  Seems that you are still using an old battery Bluetooth.
  You this should remove the system and need to install a new one which you can download here:
  http://APS2.toshiba-tro.de/Bluetooth/

  You can find the pile of BT for Win 7 32 bit and 64 bit version

  Welcome them

• Tecra S3 - Wlan does not work after installing Win XP

  Hi all

  I recently bought a Tecra S3 PTS30E-0TL059GH without an operating system.
  I installed WIndows XP Professional.

  Everything works, except for the wireless LAN. I can turn on, but it doesn't seem to find the correct drivers.
  Device Manager indicates problems with the networkcontroller and two other unknown devices.

  I installed all the drivers on the toshiba site, but it still doesn't work.

  Any help is appreciated!

  Thank you!

  Hello

  I think that the laptop supports the INTEL 802.11 B/G WLan card, but I'm not 100% sure on this subject...

  In my opinion, you should try to identify the WLan module.
  How to do this?
  In this case, the use of the PCI database should be very useful.

  More details here:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  Knowing the exact specifications of WLan, is not a big deal to get the right driver.

• Satellite Pro L550 - WLAN does not work after Installation Win 7/64 Pro News

  Hello

  I installed a true Win 7 / 64 professional version full on my Satellite Pro L550-199, PSLW9E. Now, I can't turn on my WLAN. There is no such thing as the large buttons-FN. I tried a lot of driver, that I found on the Toshiba Support page.
  Whitch is the right, or Win 7 / 64 professional not supported with WLAN?
  How can I pass on WLAN without the FN key?

  Lenny

  Hello

  To activate the WLan, you need to install the Wlan driver first.
  The wireless network card is recognized correctly in the Device Manager?
  Otherwise, install the WLan driver compatible; As much as I know the WLan card is Realtek RTL8191SE 802.11bgn

  Then once the Wlan card is recognized correctly, you must install the VAP (value added package) and Flash Cards support utility!
  These two tools are required to operate the FN keys and switch WLan using Fn + F8!

• Satellite 3000-400-Accupoint does not work after installing Windows XP

  Hello

  I installed Windows XP (SP3) on my Satellite 3000-400, but the Accupoint II trackball does not work. It is not mentioned in the hardware Manager and I can't find a driver.

  Sorry for my bad English.

  Hello

  Do you mean that you can not use the touchpad buttons too?
  Hmm, sounds a little like hardware delivers what do you think?

  Have you tried to install a driver for touchpad?
  I didn't find the driver for the touchpad for Satellite 3000-400, but I found a satellite 3000-504 (the drivers are placed in the Archive)

  Try to install this driver and check if it helps.

• Satellite U300 - 15 p CD/DVD does not work after installing Win 7 64 bit

  Hello guys...

  I have a portable Satellite U300 - 15 p with 4 GB of memory.
  I installed Windows 7 64 bit one mouth a go and after that, the DVD player does not work!
  Someone knows this problem?

  TKS

  This is the error

  SOFTWARE FOR DEVICE DRIVER HAS NOT BEEN INSTALLED SUCCESSFULLY
  * PLEASE CONSULT THE MANUFACTURER OF YOUR DEVICE TO HELP GET THIS DEVICE INSTALLED *.
  HM-ETmSE DGDGAM GSE - E1eNe ATA DEVICE * X * a failed

  Hello

  You must remove the upper and lower registry key filters.
  First remove the CD/DVD drive device manager.

  Then go to the registry and remove the filter top and bottom of this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.

  For more information, check this:
  http://support.Microsoft.com/kb/270008/en-us

• Satellite A210: taken micro does not work after installing Vista SP1

  After you have installed SP1 for Vista, had a number of problems and the head is a main & mic Sockets is more work in front of the computer.
  So cannot use Skype etc.

  Any help appreceated

  Bill

  Train from my own experience the SP1 is not fully compatible with the various drivers.
  In case you looks that the audio driver does not work with SP1.

  Don t know what sound card you have (maybe Realtek?), but a sound card driver update would be desirable.
  If it doesn t help you will need to wait until it comes out an update of the audio driver

  CU

• Thunderbird does not work after installing Win 10 and the mobile profile of Win 7

  I've installed Tbird 38.3.0 on a new Dell computer with Windows 10 on this (8 GB of RAM, 1 TB harddrive). I then followed these steps to put my old profile from the old computer to Windows 7:
  1. copied my profile on the Windows 7 computer on an external drive.
  2 installed Tbird on the new computer Windows 10 38.3.0, but has nothing to do with it.
  3. following the instructions on the site of Thunderbird on the displacement of a profile:

    a) Use the Profile Manager to create a new profile on the Win 10 computer.
    b) Copy the profile from the external drive to the new profile folder
    c) Use Profile Manger to tell Tbird to open the new profile
  

  4. start Tbird.

  I see my files with email in them, but there are problems:
  1. None of the Tbird dialog boxes open when I choose a command in the menu bar (including the new Message).
  2. I can't get Tbird to display the contents of a folder in the Home tab. There is only the accounts and the advanced features of the Inbox, display in the right pane, next to the folder tree. The only way to see the contents of a folder is right-click and choose open in a new tab.
  3. when I click or double-click on a folder, the contents of the file does not replace the previous folder. TBird on the Windows 7 computer, clicking a folder displays the contents of the new folder.
  4. sometimes when I Alt + Tab of Tbird, then Alt + Tab, moving the cursor of the mouse on the messages in the Inbox tab causes the message object, Date,... to disappear, leaving blank lines.

  I tried to uninstall Tbird and reinstall it, but this does not solve the problem.
  I tried to reboot Windows 10 but that does not solve the problem.
  I don't seem to be able to download email and preview in the messages pane, but I can't open it in a separate window.

  A lot of people seems to be able to run Tbird on Win10, so it should work. Any ideas on why it does not work and what I can do about it?

  Thank you very much in advance!

  go to add-ons.
  remove the addon of lightning.
  restart - everything should be good.
  If you still need the addon of lightning, install it again - it should give you a new version.

  Please tell us that all is well

• Tecra M10 - 10z - 3 G does not work after installing Win 7

  Tecra M10 - 10z, I installed Windows 7 pro 64-bit
  Everything is correctly configured, but the 3G connection does not work: the message is "no network".
  with Windows XP is ok.

  I can't update the firmware or similar.

  Y at - there someone who can help me?

  TKS

  Hello

  To use the 3 G, you should first check whether the module G ericsson 3 has been successfully installed.
  Where there is a visible yellow exclamation point in Device Manager, the 3G driver must be reinstalled.
  I found on the page of the Toshiba UE driver:
  [Driver Win 7 3 G Ericsson | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 148 & selProduct = 813 selSho rtMod = null & language = 13 & selOS = 30 & selType = 295 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 295 & page = 1 & ID = 71930 & DISO =-1 & driverLanguage = 42]

  Additionally, make sure that the 3 G RF power control utility has been installed properly.
  3 G RF Power Control utility"turns your 3 G at the start.

  This tool can be found here:
  [3G RF Power Control utility for Win 7 64 bit, | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 148 & selProduct = 813 selSho rtMod = null & language = 13 & selOS = 30 & selType = 322 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 322 & page = 1 & ID = 73658 & DISO =-1 & driverLanguage = 42]

  Hope the 3G network functions the reinstallation of these two tools.

• Webcam does not work after installing Win 7

  Help, please. Ive recently installed Windows 7 32 bit on my laptop dv2050us and now my built-in webcam does not work. When I turn it on in Skype, the blue light comes on but the screen is completely black.

  Sincerely, Alvin

  Get the latest version of SKYPE od,

  This is a good Win 7 Setup document

  http://support.HP.com/us-en/document/c01971745

  or

  see if it works with YOUCAM-

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?cc=us&DLC=en&LC=en&softwareitem=ob-58972-1&JumpID=reg_R1002_USEN

  If it doesn't work with this SW - check in the Device Manager to see if you have a yellow fringe or error messages in the Imaging section. -Try to uninstall the driver and reinstall it again.

• Satellite A300-1J1 - WLAN is not working after installing XP

  Hello

  I installed XP on my PC, but now I can not install the driver for my Wireless.
  I have install all of them, but always my wireless card does not.

  Are there any ideas including a driver I need - Realtec, Atheros and Intel?

  Hello!

  Satellite A300-1J1 has an Intel WIFI card, so you need an Intel driver.

  If you are looking for on the Toshiba driver download page you will find:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• Qosmio X 70-A-12 X - webcam does not work after installing Win 8.1

  I installed Windows 8.1 update.
  Webcam no longer works. If I have installed other OS, it works... This isn't a hardware problem.

  What is a driver available that must be installed for Windows or Windows Update 8.1 8.1?

  No idea why does not?

  Hello

  There is no driver special webcam for win 8.1

  The point is that Win 8 driver as well as Win 8.1 already contain standard webcam and so the webcam should not need additional driver.
  Of course, the driver for the webcam is necessary if you are using Win 7

  Question: have you installed the driver for the Toshiba system to Win 8.1?
  What is the status of webcam in Device Manager?
  The webcam has been correctly activated?

• Bluetooth does not work after installing Win 8

  Hello

  I just upgraded my Win7 to Win 8. However, after I finished, I found that my Bluetooth is not function.
  Here is information on Pc:

  OS: Windows 8 Enterprise 64-bit
  Model: TOSHIBA Satellite PSK2YL-0NU02Q L755
  Questions: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) [USB - 10 Toshiba Bluetooth controller]
  For your information, I already uninstalled the driver, but when I click on the button refresh, the pilot return to the high slot the Bluetooth device in the Device Manager dialog box. Beside that, I also try to download the driver on the TOSHIBA site but its impossible to install.
  Help please, thank you.

  Hi dominicp

  It still does not. I think I have to wait for the driver to Win 8 of TOSHIBA. In any case, thanks for your help.

• Satellite C875-100 - WLan does not work after the victory 8 upgrade - no driver

  I bought a toshiba satellite c875-100 yesterday and I did the upgrade of windows 8.
  Before the upgrade of the network wireless connector worked well, after the upgrade, he doesn't.

  Device Manager showed that my network connector driver was not installed.
  I tried all the drivers of toshiba online for this specific model with the name 'Wireless' in it and later on al the drivers for this particular model, but every time I get the message that the Device Manager cannot find the appropriate driver.

  Adesperate attempt I have just tried to choose a driver from the list of windows itself (I choose the realtek PCI wireless network card) but who gave a sudden stop of the system.

  Anyone have a suggestion how to get my network controller to work?
  If not, is it possible to revert to the version of windows 7, which was already installed?

  Thanks in advance!

  Hi mate

  As I m wrong not the laptop does support RTL8723AE Realtek Wlan card.
  You need the driver that would exactly support the RTL8723AE WLan chip