Re: Satellite L300-10 q - cannot install the recovery disk with XP SP2

Similar Questions

• Satellite L500 - 19 X - cannot use the recovery disk

  Well I had this phone two days ago and he used once after installing fire fox and my mobile to wide band of the driver and going to start and find it of going to happen.

  I tried SafeMode (three) and repair and all I got was a screen black with the cursor upward where it should have been a language screen (I used the recovery disc supplied with the notebook) so anyway, after finding out that I wasn't going to be able to fix it, I tried to install , but of course, this does not work, or so I put my XP 64 bit OS on and has perfectly worked, then I updated (using my own upgrade windows 7) and that works fine no problem, so I tried again with the original windows 7 comes pre-installed on the hard drive on the laptop and everything went find until she starts the installation of the driver or updates (I not 100% sure on this but it or after the installation of face recognition.

  Then it stops it of self down and boots back up to automatically restart and asking me if I want to repair due to a bad start, so I did the repair boots back to the top and still says I need to fix and can't find anything wrong and carries on in this circle.

  Now, I was told it could be the registry or there is a problem of graphics, I get pretty tired of having to install/reinstall/format this laptop.

  So if there is anyone who knows of what is wrong or what to do or whether it should be returned to fix, which will be very useful.

  I thank everyone in advance.

  Happy new year :)

  Hello

  Well, I think that it of really difficult to say what is the reason. Maybe the recovery disk is noisy or the files corrupted it.

  At the moment, I can t imagine what it s a hardware problem because other windows drive work properly.

  In your case, I would try to install Windows 7 from a Microsoft disc and then see what happens. If it works properly and that you can install all drivers & tools you need to order a new drive Toshiba Recovery directly.

  Good bye

• Satellite L300 - where can I download the recovery disk creator?

  Hi all

  I bought a L300 without OS and now his work well enough with Vista32. But I need to install Toshiba Recovery Disc Creator on this laptop. I tried several websites of toshiba, but I am unable to find this utility on the web (s) tosiba. Please help me with that and I appreciate if someone can send the download link for Toshiba Recovery Disc Creator Utility.

  Thank you

  Ruwan

  Boyfriend sorry but the recovery disc creator Toshiba cannot be downloaded.
  Normally the creator Toshiba Recovery disk it s preinstalled on your laptop if the laptop comes with Windows Vista.

  The only way to get a recovery disk is to order a new Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• Satellite L300 - where can I get the recovery utility

  Hello

  I have the Satellite L300 laptop with the reinstalled Windows 7.
  A year ago, I installed an original Version of Windows Vista, but I created a Windows 7 recovery disk.
  I recorded all of the files on another partition recovery, but I need the recovery utility to create the installation disk.
  Where can I find this utility?

  Thanks in advance

  Hello

  You can not download it.
  The Toshiba recovery disc creator is preinstalled and you should always create the recovery disk before you change the operating system or anything on the HARD drive.
  Save files to another partition recovery won't help you because the recovery disk creator Toshiba will not recognize it

  Now, you will need to order the recovery disk if you want to recover the computer laptop s factory settings.

• Satellite L300-1BW - can I use the recovery DVDs?

  is it possible to use the recovery DVD on my laptop TOSHIBA L300-1BW without any recovery / hidden data on my HARD drive?

  As I want to update my player running more space

  Hello!

  I don't know if I understand your question right, but you can use the recovery disk for your laptop on every time Mr. He s not depending on the partition or HARD drive.

  For example, when you replace the HARD drive, you can install the laptop using the recovery disk.

  I hope I could help a bit.

  Good bye

• Satellite A100 - cannot find the recovery disk to restore to factory settings

  Hello
  I hope someone can help out me?

  I have a Toshiba Satellite A100, model PSAANA-04E005 under Windows Vista Home Premium, Service Pack 1, 32-bit. I am wanting to sell, but have all my programs stuff etc I want to erase files and be able to convey simple with system also when I bought. Memory (purchased January 2007) gave me a Toshiba Recovery with this power drive do something if I needed it's of course is not the case to be foundI.

  Is there anyway I can fix this? All I can download etc to do this?

  Thanks heaps

  Hello

  If you n t find the recovery disk more and you want to restore the original settings, ask an authorized service provider. Guys can put in order a new disc of recovery for you.
  You have the address of the guy?

  Alternative, you can also sell the laptop without recovery disks. Just wipe the HARD drive before selling it with the HARD drive like s boot cleaning tool Darik and nuke or some other program.

  But I think you get a better price if it comes with recovery disks ;)

• Satellite A110: Cannot order the recovery disk - where to get a

  After some problems with a virus, I need to restart the system.
  I tried with the Windows operating system from another computer, but the internet does not work, I can't ' install the drivers of wright.

  Where can I buy the recovery disk? Toshiba support replied, they do not have it because the computer is too old (2006). Maybe someone can send me the recovery disk?

  Help, please

  Hello

  I guess that you have contacted the ASP in your country, and they said that the recovery disc can be pronounced, because it is no longer available.

  Well my friend, this is bad news... seems you can not order.
  In this case, you will need to install the OS by using the Microsoft Windows disk and then you can download all the drivers from the page of European driver Toshiba Toshiba.

  Good bye

• Satellite A210 - cannot use the recovery disk - error 20-DATA-048F

  I'm going to use the cause of recovery partition does not work my windows, and whenever I do it, it comes up with an error "20-DATA-048F.

  How can I fix my computer!

  Any help would be greatly appreciated.

  Have you tried to format the HARD disk until you try to use the recovery disk?
  Sometimes, I read in the forum that this may solve the problems with the recovery disk and so you can take the Windows XP disc or another tool that is able to format the drive.

  But after that, you have the Toshiba recovery disc. You are not able to use the HARD drive recovery feature.

• Re: Satellite A100-233 - where to get the recovery disk

  I have laptop Satellite A100-233.
  But I've lost my product recovery cd and I need format my computer now.

  How can I download on the internet.

  Can you help me?

  Thanks from now.

  Toshiba recovery image cannot be downloaded.
  The recovery disk for the new series of laptops can be ordered here and you will have to pay for it:
  https://backupmedia.Toshiba.EU/landing.aspx

  But if your laptop is a bit older so maybe an ASP in your country could help you order this disc

  In very rare cases you will not be able to order a disk if your computer laptop would be belongs to a series of abandoned

  In this case, you will need to install the OS from the MS Windows CD

• Satellite Pro A300: How to create the recovery disk

  Hello
  I just bought a Satellite Pro A300 with Windows XP.
  I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
  The information gives instuctions on how to proceed for the Vista machines, but not for XP.

  I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
  There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

  Any help appreciated,
  Thank you
  Mick

  Hello

  You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

  Please check this box.
  Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

  But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

  Have you checked all of the items in the box?

• Windows recovery system cannot read the recovery disk

  I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.

  Hello

  Here are all the HP information on different methods to recover back to factory settings

  Three ways to recover the PC to original operating status

  You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.
  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
     If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.
     1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
        Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
        Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
     3. When the PC restarts, select the System Recovery option and click Next .
     4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
     5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
     6. When you are prompted to recover without backing up your files , please STOP before you click Next .

        CAUTION:

        It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

     7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
     The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
     Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

     If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

     1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

        NOTE:

        By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

        • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
     . Follow the instructions.
     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  4. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.

  NOTE:

  Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots.

  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.

  Use the recovery discs to restore the PC by following the steps below.

  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. Follow the on-screen instructions and perform the necessary actions.

     NOTE:

     Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times.

  • When you are prompted, follow the on-screen instructions to backup user files.
  • After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.
    A status box is displayed to indicate the State of the recovery and the estimated remaining time.
  • If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
  5. When you are prompted to Insert additional driver disk , take one of the following actions:
     • If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.
       After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.

     • If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.

     • If you have created a personal recovery disc, press Next to continue.

  6. Continue following the onscreen instructions to complete the recovery process.

  NOTE:

  If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information.

  7. Satellite C660-121 can not verify the recovery disk

     I bought a couple of days a go a new Satellite C660-121. Today, I went to do the recovery disks, but it fails to check the first DVD disc.
     The error I get is the following
     http://img231.imageshack.us/i/failedcopy.PNG/

     E:\ is the name of the DVD player. I use Verbatim DVD - R blank, I have the laptop on the power during the burning process and I tried twice with two different disks and got the same result. How can I solve this problem?

     Hello Voger

     I have created many recovery on several Toshiba laptops DVDs and never noticed anything like that. I used that brands and DVD-R discs were Verbatim or TDK.

     Unfortunately I can't answer it what does this message mean, but you should try to repeat the creation of DVD. If possible try with TDK.
     If the same thing happens again I recommend you recovery your laptop using recovery of HARD drive option and try to create discs of recovery again.

     Sorry, but I don't see any other possibility at the moment.

  8. Satellite l.660-12 q - would the recovery disk rebuild the new HARD disk with a new recovery partition

     Talk about confusion. Does anyone know how to get a Toshiba C660 work after the HARD drive failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will be the recovery disk (if buy you one from Toshiba) rebuild the new HARD disk with a new recovery partition and install windows 7 (original OS) and accept the product key printed on the Windows license, attached to the base of the laptop. I have read a number of suggestions, but these have been considered incorrect by others.

     Surely, Toshiba must have a way to sort this problem.

     They read these messages?

     Hey Buddy

     I don't think it's really complicated, that I could find all the information about the recovery procedure in the user's manual

     The recovery disk must be created on the first day of purchase its recommended to create one in case something would be wrong with the HARD drive.

     The recovery disk contains an image. The image is a package containing Win system, drivers, tools and all the stuff pre-installed on the notebook.
     You bought the laptop and the system has already been activated so that you have need of t the key placed at the bottom of the unit.
     In addition, the use of the recovery disc formats the drive HARD integer (partitions too) and set the laptop in the same condition as at the first day of the purchase.

     There is also another option to recover the notebook called HARD drive recovery. This HARD drive recovery requires no recovery disk. The recovery disc HARD would be to use format ONLY partition C (System).

  9. Satellite Pro A200 - new ODD ignors the recovery disk

     Hello

     _Satellite pro A200-PSAE4E Windows XP_

     I started having bad 'not ready' system on the STRANGE original errors. Report of Toshiba Disc Creator: TSSTcorp CDDVDW TS-L632H TO01. I tried the FW update, but that did not help.

     I replaced the STRANGE with a new Amazon. Report of Toshiba Disc Creator: TSSTcorp CDDVDW TS-L632H SC04. The STRANGE news is listed as appropriate in the manual - it is the same model as the original. The STRANGE new works fine for normal use in XP. But when I try to use the recovery disk, it is ignored and XP always starts on the HARD drive. And when I press F12 during startup, the STRANGE news is not listed.

     Can you help me get the STRANGE recognized at boot time, please?

     Thank you.

     Mike

     Hello

     Have you ever tried to load the settings by default in the BIOS and is it recognized in the BIOS setup? The default values of the BIOS, you can load if you go into the BIOS, press the F9 key and save & exit the BIOS Setup. Then, restart the computer and try again to start from ODD.
     Can you change the boot order and set the STRANGE as first boot device?

     If it doesn t help I'll try a BIOS update. The most recent BIOS can be downloaded on the official website of Toshiba.

     But it s really strange the player works fine on XP, but you can start with him t