Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me

Hello

Satellite L300 - 17L belongs to the PSLBCE series.
I chose this model number and found exactly the same energy saving that you tried to install.
So I guess that you have chosen the right Power Saver utility for this model of laptop.

But did you also install the common Module?
This software must be installed first before installing other tools.
Update you the Win XP for the State?

Check it!

Tags: Toshiba

Similar Questions

  • Satellite A100 PSAARE: Toshiba Power Saver + graphics card noise

    Hello

    Is there another URL where I can get a version update of Toshiba Power Saver for my computer drivers laptop Satellite A100 PSAARE other than the home page?

    It seems that it is not determinative of CPU fan (he always keep at maximum speed).

    Also, I noticed the graphics (GeForce 7600) too loud.

    If the monitor is off I can't hear it (just the CPU fan), but as soon as I started working it is audible and as a continuous beep kid.

    Is there a (software/hardware) fix for this?

    Kind regards.

    Hello

    The European driver of Toshiba page is one place where you can get the drivers and tools for your European Satellite A100 PSAARE model.
    This time it s a v7.03.07.I Power Saver for Windows Vista!

    But I must say that I see no problem of software on your laptop.
    Cooling modules and fans have to run with higher performance to make sure that your hardware components may be cooled properly.

    Maybe a cooling module cleaning might help to improve the internal cooling and noise reduction.
    From time to time, I clean my fans for laptop using compressed air stream and the fans are running more silent.

  • Order of error has been committed by satellite P500 - service TOSHIBA Power Saver

    Model:-PSPE8A-025002
    [http://www.mytoshiba.co.nz/products/home/notebooks/satellite/p500/pspe8a-025002]

    OS:-Windows7 Ultimate (32 bit)

    On start up to get a service stopped notification - "service TOSHIBA Power Saver was arrested, so cannot be changed".
    That is the only other cause the change of Windows 7 known behavior where the Eco Power Saver button is no longer works but the Control Panel/Power Options standard I can select and edit power plans as usual. So it is just an annoying pop up on start up.

    Tips to prevent the annoying notification welcome.

    BR /.
    Rob

    Hi Rob,

    Have you tried to reinstall Toshiba Value added Package? It contains current saver where you get this error message. You can download it here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    I also recommend reinstall the Eco utility.

    Good luck! :)

  • Satellite A110-178 - Toshiba Power Saver for Vista?

    Toshiba Power Saver doest exist for vista? I liked it when you work under XP, but now I switched to Vista Ultimate, and the version of XP does not work under Vist...
    Thanks in advance!

    Hello

    Toshiba has also developed and Power Saver for Vista and will be installed with added Vista package.
    But the energy saving of Toshiba for look of Vista doesn t as the saver of energy for Win XP.

    TOSHIBA Power Saver for Vista belongs to Vista power options, and you can find some additional entries in Vista Power Options.

    But you won't find a stand as only Toshiba Power Saver for Win XP.

    Good bye

  • Satellite A100 - message: Toshiba Power Saver already started

    When I turn on with power supply connected, I get a false error message that says 'Toshiba Power Saver already begun'.
    How can I get rid of this message permanently?

    Hello

    I guess that the Toshiba power saver trying to load twice.
    Akuma s suggestion should work.
    Once the energy saver has been uninstalled, all entries that control energy saver should be removed too.
    After this, reinstall the new energy saver

    The alternative might be disables a power saver in msconfig.
    To ensure that the access the msconfig (in RUN type msconfig) and remove the mark of an energy intake that you might find in the Startup tab.
    Then restart the laptop and check if it worked

  • Satellite U400-12R: Toshiba Power Saver does not appear in the taskbar in Win XP

    I have some problems with the utility - Toshiba Power Saver on XP.

    After installation, the program is not displayed in the taskbar and when I stopped the operating system - it is an error with TPS.

    Windows xp sp2, the pilot of GST is taken from the official website of toshiba.

    Can someone help me?

    Hello

    I U400 and Toshiba Power Saver, I installed and it works great!
    Have you tried to install it again?

    You should do this!
    Remove the previous installed GST and restart the laptop.
    Then download the TPS right and compatible and install it again!

    Check it!

  • Re: Satellite P300D-10U: Toshiba Power Sawer on Win XP SP2 installation

    Please help with installing the Toshiba Power Sawer on Windows XP SP2
    I have a laptop Toshiba Satellite P300D.

    Installed all the drivers of Windows XP on the site, including the Toshiba driver for AMD processors.
    Then, install the Toshiba Power Sawer and not what is happening, only about 50% CPU load.
    In what may be the reason that it is necessary to install Toshiba Power Sawer?

    Hello

    I'm a bit confused of m?
    You have problems with the installation of energy-saving, or the performance of the processor?

    Notes; You can change the method of control of the CPU and the speed of the CPU processing in basic configuration of the energy saver!
    This affect and change the performance of the processor.

  • I can't install Toshiba Power Saver on my Satellite M45-S169 - Code: Ox7E

    I can't install/reinstall/remove/run Toshiba sleep on my Satellite M45-S169. After I reinstalled the system (now it is Windows XP Professional SP2). When I tried to open Power saver via Control Panel I saw denied it, and every time that I reboot the system, I get the error message:

    Toshiba power save
    A fatal error has occurred. The program will end.
    Code: Ox7E

    I can't delete or reinstall energy saver. Can I try to run saving for Windows XP SP2 applies for other laptop models? I couldn't find one for my model. That one will fit? Any other solutions / advice to the problem?

    Help, please

    Thank you very much, Oksana

    Hello

    First of all, you knew that this laptop was designed for the U.S. market and all the drivers, tools or any other Toshiba utility should be used on the Toshiba site we.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

    Please make sure that you have already installed Toshiba ACPI common Modules before as you continue to any other Toshiba Software installation.

    An important tip; the Toshiba power saver profile must be selected in the Windows power options! Don t forget!

  • Toshiba power saver disappeared completely

    Hello

    My "Toshiba power saver" disappeared - there is still an icon in the 'systensteuerung' but when I try to open it nothing happens. But still when I go to open the windows of Windows XP "energy management" tells me to use the "Toshiba power saver.
    This appeared after I used the "steganos security suite" to clean my system. First I did not notice the change because only a few icons in the taskbar where gone. The program must have deleted something. Does anyone know how to restore the "Toshiba power saver?
    I hope that there is another way to reinstall the "Toshiba power saver" instead of reinstalling the entire system...

    .. masse be nice if someone could help me.

    Ciao, Christoph

    Hi Christoph,

    You don't say what model of laptop you have, but you should be abl; e to load the Toshiba Power utility tools and Utilities CD that came with your laptop.

    If you do not have this CD, then you should be able to download the utility from the download section of the Web from Toshiba site specific to your model of laptop.

    HTH

  • Meassage error (Toshiba Power Saver)

    When the computer starts it is meassage (toshiba power save) a fatal error has accurred this program will be terminted code 0 x 0
    What is the proplem please?

    Hello

    It will be very interesting to know what type of laptop do you and which version of Power Saver is running on the device.

    Good bye

  • Vista 32 bit Toshiba Power Saver does not work - Satellite L300 PSLB0E

    I have problem with Toshiba power saver - it does not work.
    I have not found a driver for Vista 32 bit here.

    Toshiba Satellite L300 PSLB0E-04R012RU VISTA HOME PREMIUM

    Thanks for your help

    Hello

    What do you mean with it does not work?
    What energy savings you used?

    The Vista operating system uses clean power options and there is no special Toshiba Power saver for Vista as for Win XP

    Maybe you tried to install the saver of energy for Win XP?

  • Satellite L300-1F8 - how to uninstall Toshiba Power Saver?

    Hello

    I have Windows 7 on my laptop. Accidentally, I installed the saver of energy for XP and I can't uninstall it (error 0x7E).

    Do you know how to uninstall it?

    Hey Buddy,

    Normally the Toshiba Power Saver is designed for XP only so I think that's the reason why you can t uninstall it.

    In any case, you should try it with CCleaner. This freeware tool can also remove installed programs, as well as s worth a try! :)

  • Satellite C850-1E7 - need Toshiba Power Saver for Windows 8 64 x

    Where can I download Toshiba Power Saver for Windows 8 x 64?

    Hello

    C850-1E7 satellite was already pre-installed with Win 8.
    All Toshiba drivers and tools must be preinstalled too so I t understand your request because the energy saver

    However, Windows Notepad 8 preinstalled don t contain the value added package plus this package was for Win Vista and Win 7 and Win 8 upgrade, but there is no PPV for units that are already pre-installed with Win 8.

  • Fatal error of TOSHIBA Power Saver 0x51A on Satellite M115-S3094

    Hello

    By the subject, that's the problem. Unfortunately, my computer which is Toshiba M115-S3094 has just recently a fatal error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it is even more present in the taskbar. First, I went to the properties to be able to restore the program, but nothing helped.

    Then I tried to uninstall and then reinstall the program, and he always gave me the same problem with the error: the program ends. Error fatal 0x51A. Right now, my laptop does not on the mode of power supply Toshiba but on common Windows system, such as the presentation or the laptop.

    So I need help to restore the Toshiba Power Saver. I run Toshiba M115-S3094 with Windows Media Center Edition.

    Hello

    Satellite M115 seems to be a Toshiba laptop because of the 5 at the end of the number.
    In this case, you must use the Toshiba on the Toshiba site energy saving us. Did you?

    Maybe you used the right utility electricity saver, so possibly that some registry or system files keys are damage in this case install the new OS for the Toshiba Recovery CD would be desirable.

  • Satellite P300D - 15 c - cannot install Toshiba Power Saver

    TOSHIBA Power Saver for W - XP cannot be installed.
    Installation error messages: fatal error, abandoned facility. 0x2
    Try to remove the part which is installed (visible in Add/Remove Programs), gives the same error message 0 x 2.

    Under programs > Toshiba only the help file 'Power Saver Help' is visible, but is not accessible.

    Can someone help me?

    Pieter

    Hi mate

    Drivers and tools must be installed in the correct order!
    I googled a bit and found this order of installation for this laptop model:

    Windows XP Service Pack3 (RTM)
    2 KB898458 KB898458
    3 KB936181 KB936181
    4 KB936782 KB936782
    5 Sun Java 2 Runtime Environment V1.6.0_06
    AMD 6 RS780M/MC, RX781 + SB700 Chipset Module V5.10.1008.8
    7 AHCI Driver V3.1.1540.61
    Processor AMD 8 V1.3.2.0 driver
    9 AMD video driver V8.479 built-in
    or
    9 AMD M82 / M86 video driver V8.477
    10 Conexant CX20561 Audio Driver V3.47.1.50
    11 Marvell 8040/8072 LAN Driver V10.57.4.3
    12 Synaptics Touch Pad Driver V10.1.7.0
    or
    12 ALPS Touch Pad Driver V6.0.305.11
    13 V7.73.0.0 Conexant Modem driver

    Reader of cards 15 O2 OZ129 V3.23
    16 modem region Select utility V2.2.3.2 (RST223MAC02)
    17 driver Atheros Wireless LAN Driver V7.6.0.200.0.x32_wCAT
    18 Atheros Client Utility V7.0.1.98.0.x32_wCAT

    20 V6.2.238.0214 Chicony camera software
    21 Bluetooth Stack for Windows by Toshiba V6.10.07T.2
    22 Bluetooth Monitor V4.02 (Build20080122)
    23 TOSHIBA SD Memory utilities V1.8.1.3
    AES1610 24 Authentec Fingerprint Utility V7.10.1.0/V2.1.11.0
    TOSHIBA ConfigFree V5.90.09 25
    26 TOSHIBA Assist V1.03.00upd4
    27 CD/DVD Drive Acoustic Silencer V1.00.008
    PC Diagnostic TOSHIBA 28 V3.2.8 tool
    29 TOSHIBA Touch ED V3.0.3.0
    30 TOSHIBA Hotkey Utility V3.0.3.0
    V3.0.3.0 utility TOSHIBA 31
    TOSHIBA 32 Control Utility V3.0.3.0
    33 Toshiba Power Saver V7.04.02.Q
    34 Toshiba zooming Utility (smooth view) V2.0.0.24c
    35 GST Init V1.0.4.1

    * Note *: not all listed drivers or tools are released on the Toshiba driver page
    So install only those drivers and tools that are available on the page of the Toshiba driver and follow the order listed above.

Maybe you are looking for

  • My k1 is dead

    My k1 did not start this morning. I put him to sleep last night after reading the PDF, this morning, I tried to click on the power button to wake up, but nothing happened, the display lights, so I press the power button, tried to stop (or restart), a

  • Microsoft Lync sheets

    Hello I'm looking for technical data on Lync. The documents that I found on the site are too dirty, I need numbers. The appeal of Microsoft did not help either. I'm looking inside to deliver webinars and searching for data on the download/upload spee

  • HP Pavilion dv6 - 6130sr: maximum frequency of RAM on HP Pavilion dv6 - 6130sr?

    Hello. I want to buy a new 4 x 2 GB RAM. It supports my cell 1600 MHz?

  • Synaptic touchpad does not work

    I get this message when I try to fix my touchpad: "Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem is code 24. » Description:Windows was able to successfully

  • Inable choose Safe mode

    Whenever I start my laptop, after the Acer loading screen, instead of taking me to the list of boot options (safe mode, for example as one of the options), it shows a black and white screen with a simple blinking cursor gray in the upper left corner