Re: Satellite L300-1FK - screen goes blank
Screen flickered then erased, and whenever I try to start up it turns off again.
Can you offer more details please?
Is this general problem the moment where you turn on your laptop or just loading Windows OS?
When enter you the BIOS and leave it for a while is again the flicker?
What is safe mode? The same problem again?
If possible try to connect your laptop to external monitor and check how it works.
Since I got my machine in June, it has obscured the screen for a few seconds every now and then - probably once or twice a day.
Is this serious and likely to get worse - should I send it until the warranty runs out?
It might have something to do with Flashcards. I don't know what it is, but whenever I start, he refuses to quit smoking.
Thanks for your suggestions.
> Is it serious and likely to get worse - should I send it until the warranty runs out
I think that it s not easy to say if it could be a serious hardware problem or just a driver issue.
I have a few questions;
First of all; have you checked whether a BIOS update or update the graphics driver was help? For the most part, these updates do wonders ;)
How about new installation OS since the recovery CD? Have you checked if the same problem appears on the new OS installed since the recovery CD?
I think that this should be checked first.
Why the Satellite L300 laptop screen stays white?
Hello, I have a Toshiba Satellite L300-29U over purchase, turn when he was first an hour about it looks a whole without problems, then the screen was blank. Feed again in a couple of times more hours after rest and passes him still takes some time to operate.
What is your recommendation?
Thank you for your response.
Post edited by: Sams
Who knows what have you that your screen is white?
My screen is not white it shows everything correctly.
The same white screen will appear on the external monitor?
If so, then this problem may be related to faulty graphics card, if no, your laptop computer s display can be defective
(Dell LCD) screen goes blank when I connect. Requires power to the power on and off screen, at least 15 to 20 times before picture stays on. Any suggestions? No to the problem site so don't have the model numbers. Dell computer and about 8 years.
Looks like your monitor is having problems sync-ing for the resolution settings that you have defined for your monitor. When you get your screen is displayed, right-click on an empty area of your desktop-> properties-> (tab) settings.
Then, in the 'Screen Resolution' area, try to move the cursor to the end of 'Less' and click 'apply '. It will then try to change to this new resolution. If your screen is empty for now, just wait about 30 seconds and it will return to the previous resolution (which can mean that you need to power cycle your monitor you have done to get it back)-otherwise accept the settings if your display looks OK. Try to find a solution that works with your monitor. It is also possible that your monitor is going bad.
Original title : Windows Vista crashes?
I have a Dell Inspiron 1501 running Vista with SP2, IE9, on a local network using a D-Link wireless router. Crash - screen goes blank white, or clear & requires power to restart. Not particularly at some point, everything seems to happen. The msconfig poster system log event viewer critical errors at the time of the accident - the event log source indicates "plateau of WLAN, & R300? Also just today a new - source of journal of the events 'DistributedCOM' & 'Application Hang. So, whats happening & what to do?
· You get the error message?
· Were there recent changes made on the computer before the show?
Follow these methods and check if that helps:
Follow these steps and check if that helps.
I suggest to start the computer in Safe Mode and check if the problem persists.
You may also start your machine in a clean boot State to rule out the involvement of a third party software conflict.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: Don't forget to start your machine in normal mode by following step 7 of the link.
Follow the form of measures troubleshooting article and check if that helps.
Pick up the pieces after a computer crash
I suggest to optimize windows and check if the problem still persists.
I also suggest you to improve the graphics and motherboard chipset and drivers on the manufacturer's Web site and check if it helps:
My laptop screen keeps going blank. and sometimes I'm in the middle of something. the laptop keeps runing like nothing happened.
It seems that you have a unwanted material. You can contact HP telephone Support, for additional options. Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
I hope this helps.
Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
My Toshiba Satellite Pro P300 power on, the screen remains blank.
Can someone please help?
Looks like a FL. inverter problem
I doubt that you could replace is it s a job to a service technician.
The FL Inverter control the backlight of the screen and if it s faulty, you will see everything as behind a thick fog
I have a Satellite P100 and randomly, the screen goes black but the system continues to operate. I downloaded the latest drivers from toshiba, all power options the maximum support, run ccleaner and driver Sweeper to remove the old entries driver, re-installed the login screen of the mobo and nothing seems to work.
The screen goes black sometimes when using windows but STILL turns black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.
Any help would be greatly appreciated.
Model: Toshiba Satellite P100-PSPA6A-02NO21
Processor: Intel Core 2 Duo [email protected]
GPU: Nvidia Quadro nvs 510 m
Chipset: Intel i945PM
HARD drive: Fujitsu 148GB
RAM 2 GB
Windows 7 Ultimate SP1 operating system
> ALWAYS goes black as soon as the ramps of gpu for example of playing a video or comparative analysis of the graphics card.
This means that the graphics card is defective
Theoretically, it could be an overheating problem too. Higher time can also cause a black screen. You should try everything that is possible to clean your laptop using the jet of compressed air to blow the dust from the cooling fans.
If it doesn t help it seems to be a hardware malfunction but seriously a point would be interesting: have you noticed the same thing with preinstalled OS (Vista) Toshiba?
I have a Toshiba Satellite L300 PSLB8E. I initially bought with Windows Vista already installed on it. After a few years, I changed the operating system Windows 7 Ultimate. I installed the display and all the other necessary drivers (that is, sound, network, etc.).
After I installed Windows 7, when I use the laptop for a while, the screen becomes all white and the laptop hangs. This happens spontaneously. Sometimes, in less than 10 minutes and other times that it can work perfectly for hours. I checked for loose batteries and other components, but everything seems fine.
Physical damage only that there is a tiny crack on the screen in the bottom right of the screen. The operating system is not good? If I put windows Vista back as it was?
Please advise and help understand me what the problem is with the laptop.
Until we start discussion can you tell me what you do when this happen?
Hard stop and restart?
Is everything OK again when you do?
It is not easy to say what exactly is the problem, but I put t think there is problem with OS and preinstalled display driver. A long time ago I installed Win7 Home Premium on friends L300 and it works perfectly.
What you can try is to use the external monitor for a while and see if everything works well. If so, there is no problem with the operating system, drivers or graphics card. It may be that the display problem.
I * model Toshiba Satellite L300 PSLBGE * and I have never seen this problem before.
I use my laptop since last year in fact my laptop screen turns white after spending some time on it, usually after 10-15 minutes...
sound also stop here and the only solution is to reboot, after that reboot it still works well, but after a while once again its screen turns white.
Please help for this problem
Post edited by: bharatjaiswal5
Hmm have you tried to reinstall / recover the laptop to see if it helps to solve this problem?
In my opinion you should try it because it could be a problem in the system.
Otherwise if new system installation / restore does not help you, it could be a malfunction of the equipment.
Im having promblems with my L300.
The screen will not load only the my computer and the screen is blank.
Can someone helo me out?
You are able to do anything on the laptop?
I mean if you are able to access the BIOS or boot from the Toshiba Recovery disk?
Well, in that case try this:
Unplug the power adapter, remove the battery, wait 1 hour and then reconnect the AC and battery. Try to feed the machine
In any case, I own a satellite L300 and have for about a year now, I think and there many things broken on it, not really my fault, but I have to pay for it, so I was wondering if someone could tell me how to get it fixed/how much etc if I can do it myself / send it to Toshiba (which would cost a lot more wouldn t it?)
First of all, it has a broken screen, I always use because Ive had attached to a television screen that took me aggges to find and put in place haha, but the screen is cracked and only about a third of the left side is slightly visible, so Id need to fix this. BTW I have a not break it, terribly boring father-in-law did annoy me, long story.
Second, it has a little thing of button on the front for the volume that you can turn left to go down and right to go up etc, in any case, I was away from home for about a week and my mother used my laptop and when I got this little button has been broken, she refused to break and said I did but I was not at home for a week so I don't know how I did... So, every time I touch as long as this thing the volume button will what either straight up to 0, no matter how I turn it on, and if I'm on msn or a written document program whenever I touch the button he squirts the letter c and the letter b at random, so I don't know honestly what's wrong with it , here is an example; cccccccccccccccccccbbcccbcccc
Finally (and hopefully last) the battery will NOT stay in its holder thing, I don't know how that broke but I had currently recorded to and the slightest movement it will hit to and having her terribly boring to keep connected and have all these cords for connection to the screen of the TV and the power etc..
So I need to know how/who/what/when/where to get these fixed and how much. I'll probably have to save up for ages because I work on the minimum wage for a 17-year old, a huge $ 10 an hour, so I'm hoping that it does not cost too much.
I like my laptop and I really need to go to college next year, so I hope I can get it repaired at this time here.
Thanks in advance, hope someone knows what I am after haha.
> First of all, it has a broken screen, I always use because Ive had attached to a television screen that took me aggges to find and put in place haha, but the screen is cracked and only about a third of the left side is slightly visible, so Id need to fix this. BTW I have a not break it, terribly boring father-in-law did annoy me, long story.
If the screen is broken, then a replacement is necessary. The laptop must be disassembled and it is not easy! It s really complicated to remove all that part in good order and not recommend this if you never disassembled the laptop.
The new screen can be purchased from an ASP in local (partner), but it is not cheap!
It s about $ 300-380
> Secondly, it has a little thing of button on the front for the volume that you can turn left to go down and right to go up etc, in any case, I was away from home for about a week and my mother used my laptop and when I got this little button has been broken She refused to break and said I did but I was not at home for a week so I don't know how I did... So, every time I touch as long as this thing the volume button will what either straight up to 0, no matter how I turn it on, and if I'm on msn or a written document program whenever I touch the button he squirts the letter c and the letter b at random, so I don't know honestly what's wrong with it , here is an example; cccccccccccccccccccbbcccbcccc
Had the same problem. It s seems to be linked to dirty contacts I could solve this cleaning contacts near the volume wheel. I used the jet of compressed air and I didn't remove the lids or plastic parts
> Third (and hopefully last) battery will NOT remain in its holder thing, I don't know how that broke but I had currently recorded in and the slightest movement it will hit to and having her terribly boring to keep connected and have all these cords for connection to the screen of the TV and the power etc..
The must be something broken I have no idea what you are doing with this laptop but it sounds like plastic parts, holders are broken and the battery (maybe other parts too) can not be fixed and mounted as it should
I think that it of better to sell this unit and buy a new
I have the Satellite L300 nine out of the box, I used it twice now, when I turn it on the power light turns on but no screen.
Does anyone have a solution?
See Toshiba welcome screen?
Finished configuration of the operating system (after the first start)?
I am trying to use an external display with my Toshiba Satellite L300 and it works up until I have to Log in Windows (or in Ubuntu just had the same problem).
At this point, the laptop does not seem to recognize the external display more and jump using the internal screen again.
It might be relevant: I'm using dual boot Win XP and Ubuntu Hardy.
The problem occurs in both systems.
Someone knows how to fix this?
Maybe the resolution is set too high?
Try a lower resolution and an update of the BIOS.
This morning, I turned on my U920T-10 days but the screen remained black.
At first, I thought the screen was broken, but in mode 'Tablet', the screen became. Now when I slide the keyboard the screen goes black again.
How can this problem be solved?
For me, it looks like a bad connection somewhere between the screen and the motherboard.
This could be possible reason for failure to display while sliding in and out.
I guess this can be resolved easily and I think that it is a job for a technician (authorized service provider). I recommend you contact the service technician in your country to get the laptop fixed. I hope that the warranty is still valid in order to repair for free.
I hope that this can be corrected. I keep fingers crossed.
Maybe you are looking for
Hello I was listening to music with my iPhone and my Apple Watch was paired with my iPhone. When I went to see the time on my Apple Watch I pressed the button, but my screen did not show at a time. at first I thought that maybe it has turned off that
Hello We have a Mac Mini end of 2014 and have attached an old drive to a PowerMac 2002 and discovered that we have important documents that were created with AppleWorks 6.2.9 that we have been missing. Is there any tool that will open these document
My 8 key stopped working one day. I learned its water damage. I have already reset the keyboard and did the reset of the speech thing. Is it possible to make the '[' key function as a key "8"? Thank you
Already fixed the problem of the qbregestration.dat, but still get a windows stops the program. From windows "vista" event viewer: Application name:qbw32.exe,fault module name:msvcr80.dll,fault module version:8.0.50727.4016,Exc. code:c0000005,locale