Re: Satellite L300 - vertical lines of color on the screen

Similar Questions

• Satellite L850D - lines of color on the screen of the BIOS

  Hello

  I have a q L850D-12 (PSKGAE) and sometimes when I try to boot in the BIOS by pressing F2, I get vertical and horizontal lines and colorful on the screen some time, I get a beep sound while its weight this and other times I just get the line that I usually remove the battery and put it again and it will enter the bios setup.

  Any ideas what the cause?

  It s just an idea, but maybe it s a graphics card problem.
  In your case, I would ask the authorized Toshiba maintainer for the verification of the material.
  It is best to do while the laptop is always protected by the guarantee.

• Satellite P100-115 - vertical lines to appear on the screen

  Hello.

  My Satellite P100-115 is 2.5 years but yesterday a thin vertical line appeared on the screen.
  I already checked this problem by connecting an external monitor.

  The line does not appear on the external display.
  Could you tell me what might get hurt? I always took care of the laptop so he couldn't be a race of misuse.

  Concerning
  Lukas

  Hello, Lukas

  You did the right thing and tested it with the external monitor. There is evidence that the display is faulty and must be replaced. It has nothing with the help of the ADB. Such a thing just happens.

  Sorry, buddy, but there are two solutions, either Exchange the screen or use it with external monitor. :(

• What is the cause of the vertical lines of color on the monitor HP ZE4900 laptop o? S Windows XP

  I have colored vertical lines on the screen of the laptop monitor, but not on a second monitor connected to the VGA output port

  Ok thank you

• OSX suddenly stopped and restarted but does not restart. Lines of color on the screen

  Hello

  I'm on OSX 10.10.5 (I think) at least, I use EL Capitan. I can't tell the exact version, because my computer does not start correctly. The software is installed on an I mac for some time around mid-2011.

  The day began like any other day. I turned on the computer. Opens the web browser and lightroom. All of a sudden my screen turned gray and my second was a line downwards in the Middle, almost as if two screens of office have been posted on a monitor. Screens flashed several times with some funky patterns and then the system restarted with a carillon.

  When he did, white vertical bands turned towards the bottom of the screen while the Apple was displayed at startup. Sold turned screen gray, then rebooted again. This time, the bands were purple. It's the same thing again but next time the lines were orange and the system restarted a third time. At this point, I turned the computer off and tried again, but I was immediately greeted with several orange bands.

  Can someone help me find a solution or help me pin point the problem?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• Satellite L300 - lack of Volume indicator on the screen in Windows XP Home edition

  2 weeks ago, I bought a laptop Toshiba Satellite L300-2CZ.
  I installed win xp instead of vista, but I lost the volume indictaor onscren, I downloaded Toshiba tools (common and hotkey utility modules and others) and I still don't get.

  Can someone help me?

  This means that you cannot change the level of volume under Windows XP Home edition?

• Satellite L300 - I do not have 32-bit colors on the screen

  Hi all

  I just bought a new laptop Toshiba Satellite L300 and after Vista initial installation it doesn t show the colors of the screen properly. I set up the resolution, but also the 32-bit color, but on the screen, it shows just something like 256 colors.

  Everyone he knew similar, any idea where I should look like or change something to have own 32-bit colors.

  Thanks Zeljko

  Hello

  To be honest, it's really strange.
  What you could do is to repeat the HARD drive recovery.

  Turn on the laptop, press the F8 key and choose fix my computer.
  Then choose Toshiba Recovery and you start the resettlement process.

  The laptop must be set to the factory settings, and you can check if the display problem would persist.

  Good bye

• Satellite M70-151 - line gray portrait in the middle of the screen

  Hello

  Since a few days of view, I have a problem with my laptop, Satellite M 70-151.

  There is a vertical line (dark gray) in the middle of the screen... It appeared when I used microsoft word.
  At first I thought that it is just an error display or something... but after a reboot, it was still there... so I tried reinstalling display drivers...
  other drivers to install the display, but it did not help anything. The line is not as visible on a screen... It is always in the same place on the screen

  so I think that it cannot be that the material... the screen itself, but I was always very carefully with Notepad.

  my warranty ran out 5 months ago... do anyone know what I can do now?
  Don't know how to fix :(

  (sry for my bad English)

  In my opinion, it's certainly a hardware problem. I am not sure, but it must be malfunction of the display. To confirm this test with external monitor. If the desktop without this gray line certainly display problem.

  How to solve it? You can live with it or the display must be exchanged. Also, there are not many possibilities. You can contact the authorized service provider to see how much the repair will be fresh, or you can try to view an opportunity (e.g. eBay). The second option is cheaper but without maintenance manuals, you should not disassemble the laptop on your own.

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• Satellite L300-29V - failed to initialize for the logon process

  Hello

  Trying to upgrade my Satellite L300 - 29V Vista Home Premium to the Toshiba provided Win 7 Home premium with the help of the upgrade DVD Toshiba. I tried this many times now with no success. On each attempt, I get the message "* logon process initialization failed - the Interactive logon process initialization has failed. For more details, please see the event log. "*.

  At this point, the mouse is active, but none of the keyboard keys control apart from the pointer appears only on the area of the event, enter and esc. Pressure on one of them or by clicking on the OK button or Cancel will be empty of the screen. A minute later, the blue screen of death will be appear and disappear quickly, after that, I have the option load Win 7 or return to Win Vista. Do go back to Vista (which I did several times that I care to remember) is not a problem and the laptop runs without problem later. At any time I am able to view the event log.

  I followed the instructions given by the upgrade DVD, IE. removing the drivers and continued on the upgrade to Windows 7. I've updated the mobile site to download drivers/software Toshiba in order to have the machine as much upto date possible - everything to nothing is outside having more drivers to remove using the upgrade DVD.

  The only thing I did is to back up my data and recover Vista to factory settings and load on top of Vista in this way.

  But before that I'm looking for the Forum of Toshiba for any useful advice - someone else has had this problem or does anyone know a way around this - if so I would appreciate your help.

  See you soon

  Dleifynot

  It is really strange. I've updated Qosmio x 300 and Satellite A500 by using Toshiba upgrade kit.
  No problem at all.

  Did you follow instruction as described on http://aps2.toshiba-tro.de/kb0/TSB9902P60000R01.htm?

• background color: I want to change the background color of the screen of the monitor

  I have a web image in my Office I want to change the background color of the screen of the monitor without a change in the office itself

  could you let me know how to do this?

  Thank you

  I have a web image in my Office I want to change the background color of the screen of the monitor without a change in the office itself

  could you let me know how to do this?

  Thank you

  Hello

  To change the color of the desktop background, follow these steps.

  Click on the desktop and select personalize.

  At the bottom of the window, select the color of the window.

  In the next window, select the Advanced appearance settings.

  In the element , select Office.

  Click the drop-down color 1 menu and select your favorite color. ClickApply/OK.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How can I change the color of the screen on the websites?

  While ' messing around ' in the center of control & with stuff I know nothing about, (Duh...). I changed the color of the screen on the sites I visit, to green color. This makes the text in blue on the screen of the site impossible lo read, especially on the areas where they are needed to fill the void. Thank you for your time & expertise!

  I'm not sure I'm 100 percent, but you hear hyperlinks?

  If so,

  The "Windows color and appearance" window should open.

  Under "Item" click "hyperlink."

  Is that what you changed?

  If his watch as green, change it to blue and press [OK].

  If it isn't, press [Cancel].

  If it's not her, can give you a more precise description or maybe after a screenshot of the problem (without giving personal data address / email etc.).

  Note: Depending on the browser you are using, its possible to change the colors in the browser itself. For example with Firefox - FireFox Menu, Options, content, [color], will reach same choice specific to Firefox.

• Setting the background color of the screen

  Hai...

  When my application running in the Simulator, it shows only a small portion with the bgcolor that I gave in the html file. I think that the bgcolor simply encapsulates html content. So, what should I do to view the entire screen with the bgcolor.

  The problem is that in WebWorks (which uses a control called BrowserField) to view the content, the size of the display of web pages grows to the size of the content in your HTML code.

  So if height of your HTML below the screen, it will show the background color of the screen.

  To change this, you can set the window of the display using tags or set the height of the body to the size of the screen.

• To get the background and foreground color of the screen title

  Currently the title screen background color is black, and foreground color is white.

  But when we use custom theme then it can have different background and foreground colors.

  That's why I need to pick up the color of the screen title properties.

  How can I achieve this?

  Thank you

  I think you want to color your application according to the background and foreground color! Override the paint of the main method and use instance graphics for call getColor () and getBackgroundColor ()... Save it to integer variables and use it anywhere where you need...

  See you soon...

• My colors to the screen have changed - how can I change them back?

  My child was able to change the color of the screen on my Dell desktop computer. When I go to Word, the screen is black and the letters are white. I need to redefine white with black letters. Can someone help me with this problem?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a query.

  I would like to know some information.

  1. Are you facing this problem with Word?

  I suggest to refer to the Microsoft Articles help below and try the steps.

  http://Windows.Microsoft.com/en-GB/Windows-8/get-best-display-monitor

  http://Windows.Microsoft.com/en-us/Windows-8/personalize-PC-Tutorial

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.