Re: Satellite L300 will not start in the BIOS

Similar Questions

• Satellite L300 - will not start after the installation of Skype

  My Toshiba Satellite L300 won't start after installing Skype.
  This happened to someone else, and can I do?

  Thank you.

  I think Skype is probably the most used messenger and ideal application for communication.
  It is professionally designed and programmed. As you know in recent years, it has been offered in many different versions and it is always better and better.

  So I think that Skype itself is probably not the problem. I know that a lot of people also use Skype and I've never heard problem described.

  Anyway, what you can try is to remove Skype and try to install it again. Try also push the BONES at that earlier time. Maybe some Microsoft updates are responsible for the stability of the software.
  It's really not easy to say what the problem is here.

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?

• L50-A-19N satellite will not start in the BIOS

  Hello

  I have a problem with my laptop.
  I have installed 8.1 and fedora 20 windows.

  I was in fedora, when I decided to restart Windows.
  Instead of grub, I saw message with the error and my notebook has stopped booting.

  I pressed the power button / stop, he died but when Im trying to start it again, I see the logo of Toshiba Leading Innovation and that's it.

  It will not start any further.
  I decided to get my system, but when I press F2 or F12, nothing happens.
  I can't get into the BIOS!

  Please, help me to solve it.

  Somehow, this seems really strange
  I m wondering why you are unable to access the BIOS

  What you can try to do is, remove the laptop HARD drive and switch on and press F2.
  From my point of view of the rare even if the isn't HARD drive connected, you should be able to access the BIOS.

  But for Pierre, I'm not very well your laptop problem is related to the faulty / corrupt Boot partition m

  However, your comments would be greatly appreciated

• Satellite A500 will not start - cannot access BIOS

  Hello

  This morning, I got my satellite a500-1GH. I activated the option "quick start" in the bios and can not enter the bios since the screen jump the "f2" for the parameters and f12 for the boot menu and I can't get into the bios.

  I tried press f2, as soon as I turn on the computer but it dosent get into the bios menu.

  And also the custom of the bone rises, the stack of the screen in 'bbs-hard disk... boot. "and it stay like that until I shut down the computer.

  Please help me here...
  Thank you!

  Hello

  To me it seems strange that you can not enter the Bios. I just suggest you plug the keyboard external usb and try to enter the Bios (maybe, for some reasons allowing the quick start, the laptop keyboard doesn't work pressing f2). Then try to remove the hard drive and check.

  I've no idea what to say, maybe other users will also suggest something.

• Satellite L300 will not start

  AY up!

  I have a rather old L300 series which I'll put up like a computer diagnostic car dedicated. It does not attempt to start up, at all. I changed the RAM (2 GB) and hard drive (XP system) both with new components. The original, Vista hard drive, is in rude health.

  When you turn it on, the fan works, but nothing on the screen or the LEDs, I did the obvious things, any other ideas?

  AY up!

  My Toshiba Satellite L300 series shot tools. I changed disk cards and hard memory, put new components in both cases. Thinking that maybe the BIOS battery, I put the machine in charge. Nothing.

  When I turn on, the led lights green power as does the charging light when it is connected, then the fan starts. It is not "beep" to indicate the beginning of the start, nor does the HDD LED light. The battery is old, but still has enough power for 30 minutes running. On battery? Similarly.

  I did the standard things here, any ideas as to what I can do? I'm talented mechnically but computers are a book closed for me.

  Help, please...

• Re: Satellite L300 will not start and cannot restore HARD drive

  I have a L300 which stops just to start (after that the screen flash BIOS) with a single cursor flashing when I boot from the HARD disk. I can access the bios Setup and boot from the CD. I took the HARD drive connected to my external USB adapter on another PC and I can see partitions C and D and read the files correctly. I noticed that there is a directory called 'HDD recovery' on the D drive, but I don't have a recovery CD or another program to restore it.

  I found a boot of Vista recovery disc and it allows me to start a version of vista recovery but when I check the windows system can't find any errors. Also, if I choose the system restore then he says that he has no restore file.
  I suspect it's the disk HARD restore being Tosh files and Windows.

  Help someone!

  Paul

  Set the default BIOS settings and enter the Advanced Start parameters using F8 at startup.
  You can boot OS using the safe mode option?

• Satellite L30 does not start after the BIOS update

  Hello

  I upgraded my BIOS Satellite L30 and now the laptop will not boot. When I turn on the fan starts and that's it. I think I have updated the book with the bad BIOS... The laptop is only 1 day old... Is it possible to reset the machine to the default BIOS.

  Help, please...

  Hi Scott,.

  Unfortunately there is no easy way for you to go to your BIOS to its previous level. You need to entrust your laptop to a Service approved partner who has the necessary equipment to Flash the BIOS to the previous level.

  Kind regards

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Satellite A100 does not start after the BIOS update

  Hello

  I downloaded the update to the bios toshiba A100 PSAA8 on the toshiba site and applied using the procedure of updating the bios from windows XP MSE. Restart after the start of the update stopped at the toshiba start screen.

  At startup the screen by pressing ESC watch text mode. The message indicated it confirms the update of the bios version. POST messages are:

  _________________________
  Genuine Intel CPU
  No TPM or TPM has problem
  1015 M system RAM passed

  Press to enter in SETUP
  _________________________

  Pressing F2 just clears the last message in line and then no change is found.

  The laptop comes with windows XP media center edition. I don't know why the TPM secure is enabled. It is possible that toshiba is available with the module of TPM enabled in bios updates that logbook. If this is the case, they must clearly identified as 'not applicable' upgrade for machines that are not relevant.

  I found similar messages around the forum without convincing answer.

  Is it possible to fix this without sending? Even if it turns out to be affordable, it make much sense to pay for the problems caused by toshiba.

  Hello

  Please don t blame someone for you mistakes ;)
  As far as I know that only a few sets of laptops come with TPM.
  If you want to do an update of the BIOS on the models at TPM, you will need to contact the ASP!

  Looks like you used a bad BIOS or bad BIOS update procedure.

  The Toshiba page a BISO update the documentation that describes how to upgrade the BIOS on each series laptop!
  You will find on the page of the Toshiba driver compatible BIOS and information over a large number of details!

  > Is it possible to fix this without sending
  Don t think so, and therefore, you will need to contact the Asp help!

  Good luck

• Satellite L855 does not start after the BIOS update

  I downloaded the BIOS update and followed the instructions there during the installation, but on reboot (including the requested configuration), I get a blank screen. Intermittently, the CPU fan starts and stops. I think that the BIOS update failed, how to solve this problem?

  Thank you
  Neil.

  Hello, Neil

  In General when the BIOS is screwed up you need professional help and you should contact the nearest Toshiba service provider and ask for help.

  See also this thread. Perhaps this methid can help you too.

• Satellite L300 will not start even in safe mode

  Hello.

  Whenever I turn on my laptop, it shows me two options: start windows normally or perform a system repair.
  I tried both of these options, but I can't seem to access the page where I have to enter my password to access my desktop, I tried a number of things by pressing F8 during startup, including startup repair up to and restore to the previous point, but nothing happened.

  I have the vista operating system and it seems to freeze immediately after loading (the long rectangular bar with the Green thing from left to right, saying Microsoft Corp. below). It freezes... the page is all black and my cursor is there, I can move the cursor, but nothing is there to click on. HDD/ODD lights do not Flash indicating that the laptop is not all 'work '.

  In addition, it took me to a page where he was "collection of data for the crashdump"... don't know what this means but yes and it also took me to a page where it says 'one of your disks should be checked for consistency. He also posted a message saying that the registry file failure does not load. Systemreboot/System32/config/system

  I start it in safe mode and it shows a bunch of files and says please wait.
  After my computer goes on a blank page (all black) but I can see and move my cursor and it is bigger than usual so I guess he's about to go to safe mode, but just, he remains on the screen and does nothing else.
  He was about 35 minutes and it's still at this screen, that nothing has changed.

  Thanks for your help :)

  Hello

  Try to recover the device by using the drive HARD recovery option.
  I hope you didn t change anything on the HARD drive recovery partition.
  HARD drive recovery allows you to reinstall the operating system without the use of all disks!

  Turn on the device, press F8, choose repair my computer and choose the option to drive HARD recovery.
  Usually, it would begin the new installation of the OS. But note; HARD drive recovery option would be to format the whole HARD drive, which means that you will lose all files stored on the HARD drive.

  Welcome them

• Satellite L300 will not save to the SD card

  It worked a few days ago... now it's as if the drive does not exist.

  When I bought the laptop the same thing happening with the webcam... they had to reinstall my laptop and I lost everything. I don't want to do it again.

  grrrrrr

  Help

  Have you tested the SD card in another PC?

  Have you tried a different SD card in the L300?

  Have you checked the SD card reader in Device Manager?

• Satellite L300 will not let me connect

  My Satellite L300 will not let me connect unless I'm in safe mode and when I go to advanced options it just comes up with a blue screen

  Help!

  Who knows what's the problem here?
  Maybe you should install new OS. You can enter boot options using F8 at startup?

  Repair my computer option is available?

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)