Re: Satellite L300D-11V-CD/DVD drive not recognized after upgrade to Windows 7

Hi, I have a Satellite L300D-11V model pslc0e and have upgraded to 32 bit Windows7 ultimate. I downloaded all the necessary drivers on the toshiba site, but he acknowledges that he has a cd/dvd drive!

Can I put any disk in, but it will not load up or even acknowledge that the car exists!

Help, please!

Thank you

James

Please, read here:

http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

This is for Vista but works for win 7 too. I checked it myself before.

Tags: Toshiba

Similar Questions

  • HP s5220f: CD/DVD drive not recognized after upgrade to win 10

    My in-laws improved to win 10 of Win 7 on their s5220f of HP.  Given that upgrade the CD/dvd drive is no longer working or is recogniozed by the computer.  It is not in the list of devices in the Device Manager either.  When you insert a disc turns but obliously that nothing happens, and the drive is not visible in the file Explorer window.

    Thanks for any help you can provide.

    Here's what I found the solution:

    It worked to fix my Windows 10 system. Note This mentions 32 bits, but it worked for my Windows 64-bit 10. This was taken from http://support.hp.com/us-en/document/c03280768

    Resolution 5: Create a registry subkey
    Note to use this method, you must be logged on to Windows as an administrator. If you need help, check that you are an administrator, go to http://support.microsoft.com/gp/admin
    Important follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you edit, back up the registry to restore in case of problems.
    To create the registry subkey, follow these steps:
    Press the Windows logo key + R to open the run. (or right click on the windows down icon to the left)
    Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
    In the navigation pane, locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
    Right-click atapi, point to new, and then click key.
    Type Controller0 and press ENTER.
    Right-click Controller0, point to new, and then click DWORD(32-bit) value.
    Type EnumDevice1 and press ENTER.
    Right-click EnumDevice1, click on change...
    Type 1 in the value data box, and then click OK.
    Exit Registry Editor.

    Restart the computer

  • Compaq Presario DVD/CD drive not recognized after upgrade to 8.1 Windows

    Hello, I recently updated my SR5601UK to Windows 8.1, and he ceased to recognize the CD-ROM drive in Windows.

    The last disc it read was the 8.1 upgrade disk.

    I checked the power and data cables and the two are connected, Bios, recognizes that I checked for upper and lower buffers in the registry and there is nothing to remove.

    No CD/DVD drive is listed in the section 'Devices & readers' on 'This PC' or in 'Device Manager '.

    The powers of disc when a disc is inserted, but nothing appears on the screen.

    I can only find drivers/firmware on the site HP for XP, Vista and 7, but nothing for 8, so cannot say if it is a firmware/driver problem.

    HP Web site says spec of the car but not the manufacturer, so I had trouble finding the update.

    Hello:

    See if the resolution steps 2, 3, 4 or 5 solves the problem.

    One usually does.

    http://support.Microsoft.com/kb/314060/en-us

  • Satellite A-L50-1EK DVD not recognized after upgrade to Windows 10

    DVD does not now. I see device menager DVD but it have yelow attention icon. Have I can fix this?

    Try this:
    https://www.DriverEasy.com/knowledge...Maged-Code-19/

  • DVD player not recognized after starting in windows server 2003 r2

    I installed Windows Server 2003 R2 Std on my HP DL180 G6 by using the internal DVD player, but after booting into windows, the DVD drive could not be recognized and it's showing in the 'PCI device' Device Manager under "Unknown device" with a yellow question mark. I googled and tried some of the solutions, also tried to reformat and reinstall Windows, but still facing the same problem. HP support gave me some solutions like updated BIOS, erasing the CMOS memory, unplug and plug back the sata cable, but always without success.

    Hi Lilida85,

    The question you have posted is related to Windows Server 2003 R2 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

    Windows Server

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • Satellite L555-12N-CD/DVD drive not recognized

    As in topic, impossible to burn or read DVD / CD, can't all DVD player.

    Help! What should do?

    DVD player is TSST corp TS-L633C

    Hey,.

    Maybe you should do a forum search before starting a new question what you think?

    This question has been asked 100 times before. Here are some interesting links for you:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57532
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57449

    Check this box!

  • Satellite Pro 2100: card network wireless not recognized after upgrade

    I have a Satellite Pro 2100 ad I used successfully a PCIMCIA 802. 11b card wifi for two years.

    Studying the manual, I discovered that the notebook is "wifi ready" (it has a wifi switch, a switch wifi of Alt - F8, and a section of the manual).

    I opened a Bay and found out a mini-pci slot. That's why I bought an Intel 2200 BG wireless adapter and I put it inside, which connects the sons of two antennas, located in the Bay. Finally, I was ready to son mask 11 and 13, as suggested in many forums. But when I put the card inside, unknown electrically. It seems that the mini-pci slot must be Electric.toutes impossible. My Bios is not impossible, but it.

    In another Bay close to the mini-pci card, I discovered an empty shell for a chip. Is this an impossible chip?

    Hello

    As far as I know that this unit is about 4 years old and at that time the unit is tested with the wireless network card with the PA3212U-1MPC part number. This map has been tested, is also compatible and can be used.

    I put t know what is going on exactly in your case, but new material should be recognized and the driver must be installed. I put t know what you mean exactly, but can you please explain exactly the situation?

    The card is correctly recognized and installed in the Device Manager?
    You can use FN + F8 key combination to activate the wireless card?

  • Pavilion Slimline s5-1020: DVD drive not recognized in Device Manager

    My rarely used DVD player no longer works. Here are the things I have seen/made:
    -J' updated to Windows 10. It may or may not have stopped working before the update.
    -I update Windows automatically, and everything seems to be in order there.
    -The DVD seems to be operational, insofar as you can hear it turn when a disc is inserted.
    -Setup recognizes, and it is enabled; It is not at all in Device Manager or in the file Explorer.
    Based on the things I've tried, there are indications that it may be either a hardware or a software problem (or both?):

    SOFTWARE PROBLEM?
    I followed these as much as possible:
    http://support.HP.com/us-en/document/c03370738#c03370738_NoDriveWin8
    http://support.HP.com/us-en/document/c03370738#c01895589_resetpower
    http://h30434.www3.HP.com/T5/desktop-CD-DVD-read-only/read-this-for-CD-DVD-drive-with-burning-Missin...

    -I got disconnected/reconnected the drive.
    -J' tried various DVD I knew to do.
    -I don't have to update the BIOS, given warnings.
    - Nor did I mess with registry filters.
    -J' tried to find a Microsoft Fixit solution, but the one referenced somewhere in these pages don't apply to this OS - I think it was for Win 7.  I tried MS Control Panel convenience stores, but none of them worked.
    So I can't say whether or not it is a software problem.

    HARDWARE PROBLEM?
    -J' have set the boot on the CD order in configuration and the desktop with Windows 7 HP Pavilion system repair disc - nothing happened, he went straight to the HD (even if I had turned off).  So that leads me to believe it may be a hardware problem after all.

    Do I have other options at this point, except maybe buy another drive?  And in fact if I do, it is possible that one does not work either?

    While you are not alone in this problem, here's a thread that deals with her.

    http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/CD-DVD-drive-not-detected-after-upgrade-to-Windows-10/TD-p/5172346

    See if that helps

  • Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

    My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

    Hey Buddy,

    What does it mean exactly when you say he won t work?
    You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

    At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

  • Second monitor is not detected after upgrade to Windows 10

    After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.

    I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.

  • Apple Software Update will NOT work after upgrading to Windows 7

    Apple Software Update will NOT work after upgrading to Windows 7

    flyboy340 wrote:

    Apple Software Update will NOT work after upgrading to Windows 7

    More information is needed.

    Which machine you use, OS X are you running?

    Windows 7 running in BootCamp?

    The OS X app store is not present at all?

    AppStore is present but the update tab does not?

  • Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

    My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

    Help please

    Hi asalamk,

    The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

    You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

  • VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

    Hello

    I upgraded the PC host, but also virtual machines to Windows Pro 10.

    TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

    Is this a known issue?

    Thank you!

    Kind regards

    Joe

    SOLVED!


    I uninstalled VMware Player, including the abolition of the configuration files.


    re-installed VMware Player and it worked!

  • Pavilion p6210t: CD/DVD HP Pavilion p6210t drive is not recognized after upgrade Windows 10

    HP Pavilion p6210t DVD/CD drive is not recognized after the upgrade to Windows.  DVD/CD material is: LightScribe16XmaxDVD + / R/RWSuperMultidrv.  I can't find an updated driver for this device, download and install. Thanks for any advice you can provide.

    Thank you for your response.  I can't find somewhere - it now despite a lot of research - I read on a very simple solution to this problem which is (was) affecting hundreds of users HP.  In essence, the solution said that the DVD drive has in fact been recognized [as evidenced by his appearance in the BIOS] but has been "identified" and how to fix this problem was to go into the DEVICE MANAGER and delete the incorrect identification reference - then restart the computer and Windows 10 would correctly identify the DVD player and correctly in the DEVICE MANAGER list.  I decided to try this simple fix before one of the more complex solutions that were offered.  The simple solutioon worked! 

  • Acer Aspire M5-481TG - card reader does not work after upgrade to Windows 10

    Hey!

    I can't get my card reader works after upgrade to windows 10 64-bit...

    Device Manager gives me return error Code 48, tried to install different drivers, I have found for Realtek PCIE Card Reader... None of them work...

    "Code 48: the software for this device has been blocked from starting because it is known to have problems with Windows.

    Have you ever tried the Realtek website?

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

    Please uninstall the driver installed before installing this, on right click Device Manager, choose uninstall, and check the box uninstall the software too.

Maybe you are looking for