Re: Satellite L300D-13s - WiFi does not work with Vista

Similar Questions

• Satellite A110 - switch WiFi does not work with the new WiFi card

  Hello everyone

  I have a problem with my laptop Toshiba Satellite A110 - 178 (PSAB0E). I replaced the original Intel 3945abg with Intel Link 5100 WIFI card and on the new wifi hardware wifi card switch does not work.

  New wifi card is discovered and drivers to the correct job but when I try to search with the Intel Pro/Wireless software wifi networks I message to turn on hardware switch, but there light and not work. The old wifi card swich works OK - orange light is on. On the new map light is off and swich does not work.

  Help, please

  Hello

  Do you have also enabled the WLAN functionality by pressing FN + F8?
  Check it!

  In addition, I think the case is clear: the new wireless LAN card isn't compatible with Satellite A110.
  So in my opinion, you must use remove the new card Intel and install the old card that works fine in your laptop.

• Satellite Pro L10: WLan does not work with Vista

  Hi all

  Have tried to get the WIFI adapter works on Vista, have downloaded the latest drivers but still no joy.

  I know it works because I have a dual operating system: XP & Vista.

  All ideas,

  Thank you

  What do you mean exactly by still no joy? Have you installed the right driver WLan and has been the WLan card recognized in the Device Manager?

  I think the laptop is using wireless Mini-PCI Intel PRO/Wireless 2200BG Network card.
  In order to check again if a good driver was used.

  Please don t be angry with me, but it is a book of 5 years and I m sure that it s not Vista capable of course you can install Vista on this unit but it of not impossible that some devices would not 100% compatible.

• Satellite A200 remote control does not work with Vista Ultimate

  Anyone know what I have to work for my TOSHIBA (Media Center) remote?

  I had Vista Ultimate installed on my Satellite A200 (PSAE6).

  Remote has worked on software pre-installed that carried out with (he was Deutsch).

  I almost tried everything, all the drivers are installed, I searched on the site of Toshiba drivers and nothing.

  Help, please.

  To my knowledge the Enbeded IR V0.0.0.6C was installed in the factory Toshiba Vista image. This looks like an application needed to run this command remotely.

  Unfortunately, the application looks like a part of the image of Toshiba and was published by download

  by the way; A200-xxx unit you have exactly?

• Satellite P500-1CK - WIFI does not work

  Hello

  I bought a Satellite P500-1CK with Windows 7 64 bit. Cause I don't need, I replaced it with Windows 7 32 bit and now my WIFI does not work.

  I tried many drivers, Toshiba drivers and Realtek drivers, old and new versions. Installed and uninstalled them again and again. But it does not work. In the Device Manager, there is no error and no question mark. The map will be displayed as a RTL 8191SE, it's true. I've identified the vendor & device ID also.
  The other FN keys works like a charm, but FN + F8 does not appear. The wireless switch is active and the led is orange.

  When I type "cmd" then "ipconfig/all" it will be only shown the PCI Atheros Gigabit Adapter with the IP address, but not the adapter WLAN of Realtek.

  Searched Google @ and spend hours and hours, but I am at my wits end... Please help me.

  funthomas22

  Hi funthomas22,

  And this doesn t work exactly?

  You see a WLAN in range?
  Have you looked for WLAN networks?
  Can you connect to WIFI networks?

  A point would be interesting: can you try the same thing with preinstalled Windows 7 64 bits instead of your own 32-bit installation?
  Therefore, use the recovery disk Toshiba to restore the version of the OS preinstalled. You will have a pre-tested Toshiba Windows 7 installation where everything should work properly.

  Check this box!

• Satellite A300 - 1 2 does not work with 3 GB or 4 GB of memory

  Does not work with 3 GB or 4 GB of memory, only 2 GB!
  And if I plug a memory in bank1 2 GB module (bank0 is empty) - it's doesn't work too!

  He arrived with 3 laptops. (Sorry, my English is not good :))

  Have you thought about a fact that the phone doesn't support 3 GB or 4 GB of RAM?
  Isn't it?
  Maybe you should check the manual of the first user that is preinstalled on your laptop.

  I think you would find information very important.

  Equipped laptops Intel Mobile GL960 chipset is supported by the maximum memory capacity of 2 GB.
  As I m not wrong not your laptop was equipped with chipset Intel Mobile GL960 the case must therefore be clear now. or not?

  Also is important to know that you will need to use always first bank/slot memory (bank0) If you use a DEAD memory module!

  Good bye

  I think that you can assign 10 points ;)

• Logitech USB microphone does not work with Vista, Service Pack 2, PC. ____

  My Logitech USB Desktop Microphone does not work with my Vista, Service Pack 2, the PC.  He asks the driver, but Logitech says it's in the Vista software, here is the largest part of the error message:

  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site.

  Signature of the problem: Problem event name: PnPDriverNotFound Architecture: x 64

  This seems to be a problem that's happened, but after searching for hours, I can't find a quick solution.  Any help?

  Hello

  Please do as I suggested in the answer above is probably the solution.

  You can also do this after the above.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Satellite L40 - 15G - WiFi does not work - cannot activate usign FN + F8

  Hello

  I have a toshiba satellite L40 - 15 G with windows 7 32 bit and my wireless is not working, the pilot is OK
  I do FN + F8 and I can't active wireless :(

  What should I do more?

  Hello

  The Fn + F8 isn't really essential to use the WiFi network. Generally, the WiFi network should be enabled by default.
  So even if the Fn + F8 does not work, the WiFi network must be enabled.
  You see the local network card in Device Manager? Is it correctly recognized?

  Where he is, follow these steps:
  Go to the control panel (switch to the large or small icon view)-> network & sharing Center-> left column manage wireless networks
  Add here new WLan and configure it by using the right SSID, encryption and password encryption.

• Satellite C850 PSKC8E: WiFi does not work after upgrade to win 8

  I have improved my win 7 to win 8 and now wifi is not working on windows 8! Help me!

  I HAV Toshiba Satellite C850 PSKC8E

  What this means exactly: it does not work?
  Did you install Wlan driver?
  Wireless network card is recognized in Device Manager?
  Have you activated the Wlan before trying to use it?

• Satellite L305D-S5895 - keys to functions and the wifi does not work with Win XP

  Hello

  first sorry for my English

  I bought a Toshiba Satellite l305d s5895, with Windows XP, I need a software, but the function keys does not work.
  So I need a driver, but I can't, and wireless internet does not work.

  > Where could it find special XP BIOS?
  In my opinion, there is problem because most threads here are on the European laptop models. then come to question United States. Toshiba Europe and Toshiba U.S. do not work together and each of them is responsible for own models and provide support for specific country notebooks models.

  For most models, so here in Europe Toshiba has offered two BIOS. We were already on the delivered Vista laptops. The Toshiba page download available BIOS for Windows XP Home edition. in most cases, it was version 5. XX and this BIOS was designed to support public services and specific tools of Toshiba. For example, all the FN key features was only available with this BIOS WXP.

  So if any of you have laptop model US they would see how the solution with Toshiba U.S. or US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1

  Bye and good luck!

• Satellite L40-143 - WLAN does not work with the new router

  WLAN on my Satellite L40-143 does not work since I Modem Alice-1121.

  Who can help me, please!

  Hi kenny_21,

  If you have a new WLAN router you must change the configuration that I think

  The new router is visible under WLAN connections and can connect?

  If so try to connect. The standard router password can be found in the manual of it and no doubt, there will be new addresses MAC first before connect you. I put t know the exact configuration.

  Also check the options the WIRELESS card with TCP/IP. Usually, you need automatic IP addresses.

• Satellite C660-1NW - Webcam does not work with the facebook chat

  Hello

  My doughter recently bought a Satellite C660-1NW youcef.
  This laptop has a webcam on board.
  When you use Facebook, webcam chat, webcam does not work.
  The webcam indicator led is active come on, but the facebook app remains blue without screen webcam.
  Audio works.

  Skype using the webcam works.

  I have updated the drivers but when same no go :(

  Please help move facebook webcam

  Greetings,
  PP

  Hello
  If Facebook does not recognize your webcam right away when you want to share a video, click on the eye for cameras new button.

  Your Adobe Flash Player settings will be displayed.
  On the tab, make sure you only select the right type of camera you use with your computer.

  On the tab, you may also need to 'allow' Facebook to access your camera and microphone.

  If your settings does not work, try to uninstall Adobe Flash Player on your computer and download the latest Flash Player.

• Scanner does not work with Vista Windows Equium A210-171on

  I have a Toshiba equium laptop (Vista)
  I am wanting to buy a scanner so I can scan documents to computer. (I have an all-in - one but the scanner does not work)

  Please indicate where to go?

  Thank you

  Hi Suzanne,.

  Sorry, I Don t understand why you want to buy a new scanner. First of all, it would be nice if you tell us what satellite you have. Other useful information would be exactly, what does NOT work on your satellite and your 'all-in-one '...

  Please provide more information on this subject and maybe you shouldn't buy a new scanner.

  THX

• Windows Installer does not work with Vista Home Premium 32-bit system.

  My computer did not an automatic update in over 6 months.  I discovered this when I could not install my tax preparation software.  the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow
  

  For the results of the SFC
   
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

  The system update tool

  Ensures the consistency of the folder WinSxS (Side by Side).

  http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Reregister Windows install

  Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll
  c:\Windows\System32\Msiexec.exe/reg

  That you re-register Windows Installer.

• HP4050 does not work with Vista.

  I did all the uninstall/install as shown in several places and nothing won't print. I get just "printing error" in the status area.

  This worsens the problem as it used to work fine. It got to where I could unplug/plug in the printer so that it and the laptop, or restart the laptop and the dependiing overnight, one of them would solve the problem. Then, it is to reinstall the drivers, and it worked for a while before returning to the steps of the power.

  Now, it does not matter. No printing. No "job processing" flashes on the printer, only "printing error" when I opened the Printers folder.  I'm on the good (and default) printer and the correct port. All connections are good and the printer works on an old laptop w / XP and ALLOWS to work on my other laptop, also with Vista. Now it does not work it reliable either.

  Using the correct driver for Vista 32-bit, so it isn't.

  It is a great printer and buy another isn't on the horizon of affordability.

  Hello

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Printing problems? Try the Windows HP Print Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02726548&cc=us&DLC=en&LC=en