Re: Satellite L350 - screen goes black when I try to play
I have a laptop Toshiba L350 Sat. Its currently running on Windows Vista. Caused by a virus, I recently had to reinstall Windows. The laptop is now free from virus.
My problem is that when I try to play some games that I have the screen goes black and I have to do a forced restart using the power button. There are no other noise running in the background, and Ctrl alt del does not work either.
Is or has anyone else suffered from this problem and if so how they remedy? I'll try to re-installthe drivers when I get home this morning, but I can't think of anything that could be the cause of the problem...
Any help would be appreciated
Hello
Which disc you used to reinstall Windows?
Normally, if you use the all Toshiba Recovery disk should work fine after that. These parameters are pre-tested by Toshiba.
In addition, you can try to clean your laptop using a jet of compressed air. This could blow the dust of fans cooling and, therefore, it of not necessary to disassemble the laptop.
Tags: Toshiba
Similar Questions
-
screen goes black when you try to Watch youtube videos
Hi, can anyone help. I can't watch the videos on youtube, the screen goes black and the computer freezers. I have a HP DV6, Windows 7
Mattew wrote:
Hello
Still does not, now, the video and sound will play for about 2 seconds then the screen turns white with vertical stripes. He also freezers the computer completely
Hi, thanks for your help, but this is how I fixed it. Hope this helps others
However, to do this: go to http://www.adobe.com/software/flash and do a RIGHT CLICK on the logo that is being charged. THEN: Navigate down until "settings", click it, and you should have the choice: "disable hardware acceleration". NOTE: If you do NOT have this choice, study the icons down quickly: on MY screen, the left-most is an icon that looks like a video monitor: click on it and give you the opportunity to "disable hardware acceleration".
It works, if you can get it done before you get a BSOD! AND do not take the life of your computer in your hands by updating your video drivers. I do not really recommend doing that!
-
Satellite A200 screen remains black when you try to start
Hi all
My Toshiba Satellite A200 laptop computer no longer works, then everything started when I was playing a game, all of a sudden the screen turned blue with a tiny text written on it. I had to hold the power button for a few seconds to close, because nothing not happening on the computer. Then, I pressed the power button to open it. Everything was fine, until the Welcome screen. In this part, he wrote 'Welcome' but Vista left loading circle of it was not turning.
After a few seconds, I decided to shut down the computer once again, so I hold the power button for the computer firm. Here's the problem: I tried to re-open it, but the screen remained black. Nothing was happening. The power light is blue, but not all computer activity. So I left it like that a few minutes then it closed and tried again, but it's the same thing. I tried to take it apart and noticed the card two memory was not entirely in its niche. I fixed it, but it does not solve the problem.
I also tried to plug another screen on it, but this one was also black. So I handed the screen on his computer and tried to boot my laptop and it worked. He was the starter, but the first problem came, the Welcome screen was frooze it. So yes I close it up and then it's the same thing, the screen remained black.
I don't think the problem is the screen, because as I said some time it goes to the Welcome screen. Also, I hear no welcome sound when the screen remains black as if the computer would simply not starts. And as I said earlier, I see no activity of the computer on the little light in front of the computer. And to the left of it, I see clearly that the computer is ON, because the power light is blue.
That is my problem, the next time that the computer is able to start I'll try to boot mode SAFE, but until then, I don't know what to do. Please, help me.
Thanks in advance,
MrRoyEDIT:
After the computer is turned off for about 30 minutes, I started and booted in safe mode. At this stage, I have locked my computer with the close button instead on the power button. Then I opened my computer and he started and the problem was solved. Now my laptop is open and working.So, if this happens to you:
1. turn off your computer.
2. wait about 30 minutes.
3. start in safe mode
4. close using istead of now off button power button closure.It should work.
Finally, it does not work. I don't know why, but my computer did start after 30 minutes, but now it no longer works. Only, it will not start as I said later, with a black screen.
The computer worked for about half an hour. I mean, I managed to start but after running a program, it just froze and I had to hold the power button to restart. I made about 3 or 4 times, and then he was simply the black screen again. I think the problem is my processor, maybe that it is damaged or something, would it possible?
Because I see that the processor does not work when I try start it.
So let's say that this is the case, would it be the symptoms of my computer?
And if it's the processor, the only way to resolve this is to send it to a repairman or something, because I don't feel like it, I'd rather do it myself.But now, my computer is simply not starting, as I said in my previous post.
Thanks in advance,
MrRoy-----
Note: The Edit button was not there so I had to double post :/
-
screen goes black when you use windows live mail
In the last week or two, the screen goes black when you use windows live mail. I use windows vista home and I suspect it has something to do with some windows updates, I installed recently. How can I find and fix the problem? Thank you
View all Windows Live and Hotmail questions in the appropriate forum found here:
http://windowslivehelp.com/ -
Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control. I need the laptop screen too. It started just after years of correct use.
Original title: VGA:
In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...
http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution
-
my laptop screen goes black when opened more than 50 degrees
my laptop screen goes black when opened more than 50 degrees.
I have a hp pavilion dv4-2145dx, windows xp. No changes have been made recently.
Could be bad memory. How old is it?
Test the memory with a test in the BIOS.
-
Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play. Just reinstalled MP 11, same problem.
Hello
· What is the number and the model of the computer?
· This occurs when you are working on any specific file format?
· Were there any changes made on the computer?
· You play the file in mode full screen?
Change hardware acceleration
a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)
b. right-click on a space empty on the desktop.
c. go to the resolution of the screen.
d. click Advanced settings, and then click the "troubleshooting."
e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).
You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373
-
Satellite U920T - the screen goes black when you drag the keyboard
This morning, I turned on my U920T-10 days but the screen remained black.
At first, I thought the screen was broken, but in mode 'Tablet', the screen became. Now when I slide the keyboard the screen goes black again.
How can this problem be solved?
Hello
For me, it looks like a bad connection somewhere between the screen and the motherboard.
This could be possible reason for failure to display while sliding in and out.I guess this can be resolved easily and I think that it is a job for a technician (authorized service provider). I recommend you contact the service technician in your country to get the laptop fixed. I hope that the warranty is still valid in order to repair for free.
I hope that this can be corrected. I keep fingers crossed.
-
Satellite L405D-11V - freezes and the screen goes black when you watch the video
OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.
I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.
However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do
Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?
Thank you
Hey Buddy,
You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
What operating system you use on your L405D satellite?To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.
In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
Explain your very detailed problem. I think that everything can be clarified then. :) -
Satellite A210 - screen goes black without any reason!
I got my satellite A210-171 for a few years and a few months ago, everything was OK.
But our when I'm working or watching a web my screen goes black and nothing seems to work?
The only way around this is to turn off the power switch on the laptop then restart it again.I then get a message saying roughly...
Computer has not closed properly OR sound closed to protect all data, then a countdown begins to re open!It may be OK for a few hours or maybe a day there is no limit of time on it!
If anyone can help I would be very grateful, but please don't use of computer jargon that I don't understandThank you
Hello
It is really hard to tell what is causing this problem. It could be a hardware malfunction or a software problem.
But as Auma says you should test the RAM with Memtest86. It's really very easy to use and can detect modules memory defective RAM check it!Another question is have you installed a different display driver or updated? I ask this question because the display drivers they are not causing Toshiba sometimes of questions.
In any case, I would recommend updated display driver and check the site Web of Toshiba for a update.And before moving on to an authorized service provider reinstall you Windows using the Toshiba recovery disc. So you will get back factory settings and with these settings, your laptop should work fine.
Good bye
-
my screen goes black when I plug in my HDMI cable
I have never had a problem with the help of my my TV HDMI cable to watch movies from my laptop. I do not know whether the windows update is causing this problem, but when I plug in my HDMI cable to my laptop, the screen goes black and the TV receives no signal.
Hi, I had the same problem when I plugged the hdmi for the first time that I chose the 'graphics options-> output-> TV' at first by right-clicking on the desktop. Later I selected "change pc settings" section of charms and the selected tab devices add a device and while the laptop was looking I have connected the hdmi cable. This is how I got to the TV screen.
probably, you will need to turn off the TV and the laptop first. Then put on the tv and select the desired hdmi option before you put on the laptop and pressing on the ' logo window + p "or"fn + f4"keys. Lets c if it works -
My screen goes black and I have to move my mouse to return to the screen. It becomes a big problem when I watch a movie and the screen turns black during the good parts. How can I stop these interruptions?
Hello
It seems that the computer will sleep when it is inactive. I suggest you to change the settings on the computer's power options and check. Refer to the below links to change the settings of the sleep and other power options.http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions
I hope this helps.
-
Screen goes black when you use the computer - Vista
Original title: SCREEN GOES BLACK, COMPUTER STILL WORKS. A MESSAGE CAME ON A MIRROR SCREEN, COMPUTER WORKS FINE IN SAFE MODE
COMPUTER STARTS SOMETIMES, BUT SA SEEMS IF THE NETWORK IS ON THE DISPAY GOES OFF, A MESSAGE CAME ON SCREEN MIRROR, EVERYTHING HAPPENED THIS WEEKEND. DID A FULL VIRUS SCAN, NO PROBLEM, DID SPYBOT AND SOME COOKIES WERE FOUND. vISAT OPERANTING SYSTEM.Hello
If the computer is running in safe mode, then start in safe mode and perform a clean boot to verify if a third party program or service is the cause of the problem.
Step 1:
Start your computer in safe modeand try to perform a system restore, safe mode.Check out these links for more information about the system restore:
http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questionsStep 2:
Try to put the system in a clean boot.Refer to this article for help:
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Steps to perform a clean boot:
a. click the ORB start on your desktop
b. type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
c. in the general tab, click Selective startup.
d. under Selective startup, clear the check box load startup items.
e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
f. click OK.
g. When prompted, click on restart.NOTE: Please check that you start your computer in normal mode when you are finished troubleshooting. Followstep 7 of the article mentioned above.
Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
my screen goes black when I connect and when I try ctrl alt del it don't work
my computer of solid work for the 1 year I got it but not when he just started having problems when I try to connect normally, I sign, but then the screen goes black and all I see is a slider and I try Ctrl-alt-delete but an error msg appears saying: I can't get to the settings of Microsoft security I tried running a virus scan , but it was cancelled way quarter in I need help
Hello
Did you do any changes to the hardware or software on your computer before this problem?
See the methods:
Method 1:
Why my screen is black when I start Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7
Registry warning
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registrySee also:
Windows Vista and Windows 7 black screen on computer unlock
http://support.Microsoft.com/kb/2431700
Method 2:
Launch the virus in safe mode with network scan.
Step 1:
Start your computer in safe mode with network.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
NOTE: see 3 from the link above, Advanced options boot (including safe mode).
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Select Mode safe mode with networking.
Step 2:
I suggest you run an antivirus scan using the Microsoft Safety Scanner to confirm that your computer is free from any infection by the virus. Please find the link below.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.
Hope the information is useful.
-
Screen goes black when the unit reaches a point in 3d space.
Hello
I've simplified a more complicated model to try to understand what is happening, but I can't for the life of understand me. My camera starts to zoom in to a way of 3d layer in the distance. Everything's fine until it reaches a certain point, then the screen goes black. The camera did not run in the layer, I don't think that the lights have something to do with it. It just goes black. Any ideas?
The first image is when the camera starts panning. The second is when the screen goes black. Note that the camera is still quite a distance between the 3d layer.
Thank you!
If you turn on diagrams, you'll see that your camera is not pointed at the level of the layers. I don't know why you have animation camera rotation. You have the camera facing the path, is the point of interest to market? You may experience gimball lock.
The best way to animate a camera must do 3D null parent. Now you have a camera on a cart. Gimbal lock is not a problem, point of interest is not a problem, and it's easy.
Maybe you are looking for
-
Re: Satellite A200-1AX - black and delay image display
My Satellite A200-1AX is 3 weeks old and its LCD screen has been replaced by Toshiba Center here, to the Kuwait due to defects.After placing the new LCD screen I notice that whenever I'm turning on and off the device, a black picture delay appears sl
-
Siri does'nt hear me. Is there any solution for this?
Since installing ios on iPhone 9.2 6 siri does not hear what I'm saying. Is there any solution for this?
-
Update the motherboard and processor
Hi, I have a HP PC with a motherboard problem. (PC hangs and I can see several swollen capacitors) So since it must be replaced in any case I think I might as well upgrade the processor and the card mother together. The GPU and power supply are alrea
-
Original title: problem installing Adobe Try to reinstall Adobe Reader. I get an error saying that the system cannot find file 'acro.read.msi '. Can someone help me on this?
-
Keep MSN home page direct me to other sites
Whenever I type a search in msn seach I'm automatically redirected to a web site that did not ask, how can I solve this problem? I always get the correct site using default goole.