Re: Satellite L40 - 14N - Ethernet port does not work

Hello

My ethernet LAN doesn't work anymore - laptop computer signals that it is fine - when I plug a cable in there still says no cable attached.

I've updated all the drivers - is their a FN key that turns off? or can someone help me?

What laptop Satellite you have exactly?

The LAN port can t be enabled or disabled with a FN key. It is possible that wireless (FN + F8).

Have you tried to update the BIOS? You can find it on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

Tags: Toshiba

Similar Questions

  • Satellite L40 - 18W - USB ports does not work after format HARD drive

    I formatted my laptop "L40 - 18w" after that all usb ports do not work.

    Could you please help me on this issue

    Thank you

    Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
    Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
    There you can find all the drivers for your model of laptop including driver chipset.

  • Satellite L650 - 12N USB Ports does not work

    My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
    It shows a yellow exclamation mark on my system.

    I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
    Under the key USB gives error code 43, I do not understand.

    The webcam and the wireless card no more.
    This boot problem after a storm in my area some time ago.

    Please can someone help.
    Thank you
    Sani

    Hello

    > This problem start after a storm in my area some time ago.

    Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

    I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

    But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

  • Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

    I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

    Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
    The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

    Plug the mouse on or off doesn't change anything. Only restart helps.

    Any ideas?

    It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

  • Satellite A10 s203: USB ports does not work

    Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...

    Hello

    If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.

    Good bye

  • Satellite A200-13O - USB port does not work

    Can you help me? I have a new Satellite A200-13O, USB does not work.

    Hi Gilbert

    What do you mean exactly with the USB does not work?
    You plug the 3rd USB external devices advantage, which cannot be recognized?

    Have you installed all necessary drivers for these devices?

    What operating system do you use? If you are using Vista are you sure that the external USB device is compatible and supports the Vista operating system?

    Please post more details!

  • Satellite L40 - 12N - LAN Wireless does not work

    I bought this phone 2 days ago, but when I try to connect wirelessly, it does not work.
    The switch is set on it, but the light is not.
    in the Device Manager, it says the wireless LAN card is working properly.

    Hello

    Try using the FN + F8 key combination to ensure that the wireless network adapter is correctly activated.

  • Satellite M300 - left USB port does not work

    Hey,.

    I have a M300 Satellite, with a USB port on the right and the other on the left side. The one on the left has never worked with anything. Its never bothered me until now - I bought a portable HD and I need to connect it and a mouse at the same time...

    Interesting note though that when I put the laptop HD in the left USB port, the led lights, hard disk. The lappy himself made no sign he knows its there and I cannot access it, however...

    Any advice? Thank you very much!
    Dan

    Jin

    I guess, it is burning or something like that. You can buy a USB hub, it's a device that develops a single USB port into several so that there is more available ports to connect devices to a host system. It's not expensive and you connect many devices.

    Greers

  • Satellite L40 - 17O - LED Wireless does not work

    I bought laptop Satellite L40 - 17O a couple of days. Wireless LED doesn't work. It worked the first time after I installed the OS (XP SP2) top, and now it doesn't work. I didn t try again Wi - Fi.

    I don t know is that it works or not. Maybe it's just a problem of LED.
    What do you suggest me?

    The WiFi network works with the original image of preinstalled Toshiba?

    I mean this laptop came with Vista and normally everything should works using the Vista operating system.
    I assume that you need to install a compatible XP WLan driver for notebook simply you all what s

  • Satellite L40 - Sleed and standby does not work correctly

    I have a portable Satellite L40 and it worked correctly until now. I turn and after I have put on standby (stand-by) mode; When I want to use my system, so to get that back to normal (I press the turn power button to exit the mode "standby" button), Windows Vista 32-bit restarts - it is not back to the moment I left it before the "sleep mode".

    Therefore, restarting Windows Vista 32-bit, and the screen "Windows has been disabled incorrect" appears instead to return to the configuration of the system that let him before sleep / standby mode.

    What can I do to fix this and make "sleep" mode works correctly?

    Hello!

    In your case, I'd do a BIOS update. You can search for updates on the Toshiba site
    http://EU.computers.Toshiba-Europe.com

    You should also look into the mangment of power. Here, you configure what happened when you close the screen, press the power button and so far.
    I found a great thread on this topic:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=141529𢣙

    Good bye

  • Usb and Ethernet port does not work after update of windows 8.

    Hello

    I have a new HP laptop, and two days later the window updates automatically and my USB and Ethernet port stopped working. I returned it and got a new laptop and it is same thing. every couple of days that he update and refresh back to the old settings without losing my documents. I can't keep install my apps every two days after the update. Please let me know what I can do to update without having this same problem. If there is anything I can do so I have to return the laptop.

    Ben.

    Hi Ben,

    You can install the Windows updates manually by changing the settings of Windows updates.

    1. Open Windows Update in Control Panel by dragging it from the right edge of the screen, typeSearch (or, if you are using a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clickingSearch), get into Windows Update in the search box, by typing or clicking onsettings and then type or by clicking install optional updates.

    2. In the left pane, tap or click change settings.

    3. Under important updates, click the following option:

      Download updates but let me choose whether to install them.

    4. Under recommended updates, select the give me updates in the same way I receive important updates recommended , and then click OK.

    Manually install the Windows updates and find the problem causing the update.

    I hope this helps.

  • Satellite A135-S2286 - USB ports does not work after BIOS update

    I recently had the dreaded BIOS password prompt problem. I checked online to the toshiba support site and took the laptop to a toshiba authorized service center and is fixed by getting the updated BIOS updated to 1.60, but after update BIOS, none of my USB ports work.

    When I connect a USB device, a warning from yellow pop up comes up unrecognized USB device. The same USB device works fine on other computers/laptops. I searched online for a solution and found on a lot of people have the same problem, but did not find any fix for this error.

    It will be useful, if someone has a solution for this error.

    Hey Buddy,

    Is there yellow exclamation marks in Device Manager next to USB ports or they appear correctly?

    If you notice a yellow exclamation you must remove the USB port and restart the computer. All USB ports are installed automatically, you do not need an additional driver.

    I hope that it helps :)

  • NB200-12N - USB port does not work

    Hello

    I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
    Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
    But does not work.

    Thank you

    Paulo

    If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

    Try reinstalling the chipset utility.

    By the way: two other ports work well, right?

  • S-Video port does not work on Tecra M5

    Hello. S-Video on my laptop M5 port does not work. I checked everything Svideo cable, TV and also the drivers. Everything works fine. Could you advise me please? How can BTW, I check the Svideo port?

    Hello

    There is not much to do
    (1) Please make sure you use a S-video S-video cable and connect it to the TV
    (2) turn on the S-video TV port - VERY IMPORTANT
    (3) use the FN + F5 key combination to switch to TV

    All that s!

  • HP 15-AF006AX: USB 2.0 port does not work

    Hello

    I installed window 7 in my new laptop, but the usb port does not work in the case of data transfer.

    and I am not finding a driver for this, can you help me for this problem

    Thanks in advance

    Hello:

    The only suggestion I can offer would be to settle the AMD Chipset drivers from the link below the problem.

    You want the first file on the Web page.  Install and reboot the PC.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

Maybe you are looking for