Re: Satellite L40 - N14 sudden alarm high every now and then...

Similar Questions

• P2715Q, black flicker for a second, every now and then

  Nice day

  A few months ago I bought the Dell P2715Q, and with some delay, he finally delivered. Well, it appeared the first monitor was broken and had a blue vertical line on the screen. Reference Dell replaced without any trouble, thank you very much for this. However, now with my second P2715Q I got a new problem. Works in 4 k resolution, 3840 x 2160 60 Hz, every now and then the monitor turns black for a second and then it goes back new. It happens randomly, but it seems to happen more often when playing or watching films/series. It happen to rest so so, or only during navigation. It happens sometimes only once in 15 minutes about, sometimes twice or three times in one minute. Oh yes, connected with a cable of DP. So, any idea what could be the problem? Does anyone else have this problem? I'm probably going to soon test the monitor on a friends place, see if my gpu (new) could be causing it, but I doubt it. I had him flickers black on my previous so P2715Q and tested my friends place aswell. There, blacks of ejection happened too.

  The problem has been resolved, it was cable that was the issue. Had a DisplayPort to Clicktronic cable high quality 4K but apparently it wasn't enough good, bought a cable Premium GOLD of Lindy who certified DP1.2 and the problem doesn't happen more.

  It's funny, although considering THAT VESA said in a blog post that it doesn't matter what cable you use, but it is obviously false.

  Also the cable which is included in the box with the monitor at Dell, the DP-> CDM works also, but it is very lose in the connections and the screen lights up and turn it back on as soon as you touch the cable or set the monitor a lack of contact.

• Does anyone know why me projected in Logic Pro would be light pulses every now and then and would continue for what seems like an eternity?

  Does anyone know why me projected in Logic Pro would be light pulses every now and then and would continue for what seems like an eternity?

  The white flash indicates logic receives an order of what it can not do... Its like a visual error msg.

  I suspect a device connected to your Mac sends an error msg... or even your keyboard typing accidentally pressed causes the white flash error...

• What is error 53? Appears every now and then, followed by a pop up of security indicating denied access.

  Error 53?

  What is error 53?  Pop up every now and then, followed by a pop up of security indicating the access denied... I click ok and it goes away. That's what worry?

  Thank you

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to the service of files and folders, and would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  I hope this helps.

• Every now and then a window appears stating "Personal Storage".

  original title: I use Windows XP.  Window "Personal Storage.

  I use Windows XP.  Every now and then a window appears stating "Personal Storage" and it apparently passes to load information from somewhere in the computer.  I would like to know what data is stored and where I can find it?

  Thank you

  Tom

  Hello

  · Makes the popup window at some point?

  · You have scheduled a backup timely data on the computer?

  · How much time does it take for the course ends?

  1. check if no trace of the task is listed in the event viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  2. always check if any program of personal storage name is listed in Add or remove programs list.

  Access add or remove programs, you can follow these steps:

  a. click on start

  b. click Control Panel

  c. click Add or remove programs

  3. on-line virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Windows Mail seems to change the sort order of the mail every now and then.

  Windows Mail seems to change the sort order of the mail every now and then.  I want that it in the order received, desending and back to this sometimes.

  Hi rondebmar,

  You can check out the following link and try the suggestions posted by t-4-2 on Thursday, January 7, 2010 08:57 PMand check if this may help.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/d9aa1297-1124-43e5-b463-5441f3922388

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-e-mail-messages-in-Windows-Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-for-new-e-mail

  Hope this information is useful.

  Boumediene. K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop is running slow, loses connectivity every now and then!

  Hello

  It's a laptop Dell Inspiron Windows 7.

  It is about 3 years, 2 years it works fine, however the last 6-8 months it is slow but also loses wireless connectivity every now and then.

  I tried with a different laptop internet connection and it works fine.

  Details of config:

  Windows 7 ultimate Dell Inspiron portable edition

  I3 Processor with 3 GB of RAM

  Drive hard 320

  Thanks for the reply.

  How can I perform a destructive factory restore?

  On some machines Dell start you by pressing Ctrl + F11 at startup. The Dell web pages contain details on the process.

• HP OfficeJet 8500 has more 910 g give up connection every now and then

  I explored the forums for 8500 more connectivity issues and did the following, but the problem persists:

  I am using the Wi - Fi connection (force 4), web update services and software packages, can use eprint, but printer loses connection (even with eprint servers). I have it set to fax so phone line is connected and noticed that when a call arrives (or goes), it restores the network connection. It seems that he loses the connection when it starts in mode 'sleep'. Is there a way to disable, and then do a test?

  I noticed that first print wirelessly from a laptop computer crashes and comes back with an error (sometimes work after a long time), but the second try and then work (it seems that the first test is trying to put the printer back to the mode 'sleep'!)

  I have the static IP assigned (in both the printer and the router) and static DNS primary.

  I have IP v4 ONLY on the printer.

  What can be done? Help, please. The printer is only a few days old!

  I finally realized that you can go to the 'Préférences' menu on the touch screen and disable the "power saving Mode" - this apperently solved the "problem of loss of connection" (with static IP/DNS and IP v4 only)- but the screen was continually WE (and quite brilliant - more than a lamp at night!). I also found that there is an option under "Tools" screen saver But the screensaver works just the video "promo" continuously without interruption and with the same brightness on the screen. Is it possible to say 'black' after 10 minutes?

  Perhaps HP should provide a screen saver that turns off the display after a period of inactivity.

  APPARENTLY, THE LOSS OF CONNECTION BUG IS DUE TO "ENTERGY SAVE MODE" WHERE THE WIRELESS LAN CANNOT DETECT TRAFFIC TO WAKE UP THE PRINTER. THIS SHOULD ALSO BE FIXED IN THE NEXT FIRMWARE.

  To SUMMARIZE: In order to avoid the 'loss of connection"(for wireless) perform the following steps:

  1 assign a static primary DNS and static IP address (through EWS doing via a browser is easier - see below on access EWS).

  2. optional but recommended: connect the printer wireless MAC address to the same static IP address in the configuration of the router (router consult manual or vendor on how to do this).

  3. via the integrated Web server accessed through a browser of computer - under 'Network' settings, select 'IP v4 ONLY' (EWS is accessed through a browser on the same wireless LAN by typing http://192.168.1.xxx - where xxx is the IP address assigned statically - you can find it via touching the wireless icon on the screen in the printer)

  4. go in the 'preferences' and disable the "power saving Mode" (in the touch screen of the printer interface)

  5. optional but highly recommended: turn on the "screen saver" in the "Tools" menu (in the touch screen of the printer interface)

  6 see if it the problem slves (mine is running fine since then)

  These steps are for HP Office Jet 8500 has more 910 g printer. I hope it helps someone here!

• Satellite Pro U200 sound loss every now and then we don't know

  While I listen to my MP3s suddenly sound turns off
  I checked if the sound is muted, is NOT
  I checked if the volume is low, it is NOT

  The only way I can get my sound back is to restart the laptop (NO log off and on again).
  There is no distinctive model for how often this happens. Sometimes this will happen 7 times a day and sometimes I continue to use it for a week or even 10 days then it will start to reproduce.

  After the sound turns off sometimes I can hear some cracks and scratches if my media player works always read MP3, but it would be a second or so and once again this cracking is not continuous and is not a particular model.
  I asked my business HelpDesk for updating the Audio driver twice and but still this problem occurs.

  concerning
  Wiz

  Have you tried to reinstall the whole OS from the recovery CD?
  Eventually it s only a software problem. You know something wrong with the file system or registry entries.

  I had a sound problem on my laptop after reading 3rd party software installation. The question was very strange. If I played the audio files from the HARD drive, the sound was not clear. After the new installation of the OS, I was able to play the music properly.

  Try this. Maybe it helps.

• Why I get Windows update to KB890830 47.6 MB every now and then

  Hello

  My OS is Windows Vista Home 32-bit Premium (Japanese) even to windows update I get the update for KB890830. In the update of Windows I can't in November, there were nine updates, in December, I had it again.

  Is this a bug, or should I update once more. Same file with the same size isn't strange?

  Thank you

  890830, even though its been around for 8 years, its still a good download, its update of spy ware

  Microsoft. Use this link

  https://support.Microsoft.com/en-us/KB/890830#/en-us/KB/890830

  Just make sure that you set for the Japanese, not English, if that's your language...

  You should see the same update every two weeks or more, its always a updated version...

  Download to desktop, R.click on this issue, open, run the quick scan option...

• R5 gel every now and then

  I have the latest drivers and updates, I just reinstalled windows, always freezes very well!.

  You can get a better answer if you repost this in the forum of the Club of Alienware .

  And do not forget to mention the version of Windows and more details on these freezes (for example, when you run a specific application, I watch the video, etc.) when you validate there.

• Error of activation of Windows 8, want to activate every now and then.

  Why my windows asking for activation after update.the pc same cant active again where is false, I have tyrto active eroor code.who is the solution now windows recommended to upgarade readers Windows 10 wiil try if the same still need activation, which can do.or my activation key expires and must be buy windows againevery recommended upgrade?

  Thank you

  Hello Rhendetz,

  Thanks for posting your question on the Microsoft community.

  We are in need of more information about the issue so that we can help you further.

  How activating Windows error do you get?

  Thank you for details on the issue.

  I suggest you run 'Microsoft Genuine Advantage diagnostic tool' and check.
  Reference:
  Request a genuine Windows support
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/submit-request

  Please try to perform the activation of the phone and check if it helps.
  Refer to this article:
  Get help from Microsoft Windows activation
  https://support.Microsoft.com/en-us/KB/950929

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Satellite L40 breaks down after 5-10 minutes and will not return

  I hope someone can help

  I have a toshiba Satellite L40. It has not been used for a while, but I need to have stuff on it.
  Put it on yesterday and then crashed after 10 minutes and would not go back
  .the same thing happened today.

  I took out the battery and tried just to power / and vice versa, but no joy.
  I'm not very technical was so had no idea what to try next.

  Hello

  If I understand your question, the unit stopped automatically.
  Such judgment may be related to high temperatures inside the laptop.

  L40 series is a bit old and probably the cooling vents and grilles are obstructed by dust.
  Try to remove the dust using a jet of compressed air. Generally, this lets get removed dust and it helps to keep the temperature low.

  Of course, this procedure would only if the problem is related to high temperatures.
  In the case of the laptop shuts down for other reasons, this workaround would be useless

  You said you need to get something from him in this case you could remove the internal HARD disk and could connect to another laptop computer through SATA to USB controller.

• Satellite L40 don't stop with power connected and is not in sleep mode

  Hello world. I hope someone can help me. Basically, there are two problems: one with judgment of the laptop (Satellite L40 - 17U (Vista 32 bit Home Premium SP1)) down when power is connected and the other with closing the lid and put it to sleep.

  1. in recent weeks, it all of a sudden won't stop, whenever power is connected. When it's on battery, it will stop. When the power is connected, and I try to stop, it seems that it closed down (all activity stops and the led goes off) for about 1 or 2 seconds, then it goes back.

  2. when I close the lid (all settings in Vista are set to put the laptop in a State of 'sleep' when the lid is closed), the laptop enters a State where it cannot be recovered by stopping by pressing the power button for 10 seconds to close completely. When closing the cover, only the battery LED continues to Flash orange (the way it should be), but apparently the laptop keeps consuming power, because when I restart later (first having to close as described above) tends to be quite an empty battery as it was before the next redΘmarrage it (like go from 100% to 65% in 30 minutes as "standby mode"). Also, when I open the cover, the other LEDS will on new (green), but nothing happens.
  After the restart first by pressing the power button for 10 seconds to close, I often get the message that Windows cannot be started and run the system repair.

  I just do a completely clean install with the product recovery CD (has not installed SP1 yet), updated to v1.90 BIOS, but the problem remains.

  I'm afraid that my only option will be to bring him away for a warranty repair, but knowing that these repairs can take weeks, I'd rather try a solution here could someone recommend me first. If you have any ideas, please let me know.

  Thank you
  Daniel Breslauer

  Hi guys

  Never had this problem on my laptop, but with regard to an other users here in the forum the BIOS might help solve such strange behavior for laptop
  To be honest the closed question is unclear for me I noticed a problem before on my laptop but the update of the BIOS helped.

  This is why I recommend update BIOS first.
  If the problem still appears, the ASP should take a look in the notebook.

  Good luck

• Satellite L40 - 14N - I can't use headset and microphone plug

  I have a Satellite L40 - 14N whit Vista Home Premium.
  I did a restore on it. Now I can't find my sound volume of the helmet more and they also no longer work.

  My sound card is Realtek HD.

  Help, please.

  You see a speaker icon in the system tray?

  Did you check if the volume is muted?

  Try inhibition and then reactivate the main Volume.

  If you see not the in Device Manager Realtek sound card, download the Realtek drivers on the Toshiba site.