Re: Satellite L50-B05D cannot load Win 8.1 - not found boot device

Hello

I have a C50-B05D Satellite and I recently downloaded the bios update and I applied it to my system. When I did it said it contained the update already. Having been on the laptop for a while, I closed the lid and it turnt. When I turnt back on Windows would not load and a bootable device not found message occurred.

Any help is appreciated

Thank you

You can enter the BIOS settings?
If Yes check it please if the HARD drive is listed and recognized correctly. By default the BIOS settings and try to restart your laptop.

Tags: Toshiba

Similar Questions

  • Want to m6-k088ca: m6-k088ca tea spilled want fried HARD drive. try to load the operating system on the new drive HARD get no found boot device

    Hi I want to m6 - k088ca it came with Windows 8, I've updated to 8.1 has a 64-bit operating system. I spilt tea on it and fried hard drive.

    Try to save money I bought a 500 GB hard drive instead of a 1 TB of HDD, it can with. Install it and then through the process to implement the recovery program and try to load the image of the system on my USB key. Recovery program did come and I tried to load the System Image to my USB disk hard nine, but nothing happened.

    I have only kept getting no device found startup message after the attempt to load of the System Image. Discover your forum, I discovered that I could not use the Image of the system on nothing less than what was originally on my computer a 1 TB hard drive. So, I went out and I tried to install Image system on it. I was unable to implement the recovery program I had before. I went to the boot options and he set up to boot from the key USB didn't keep get no boot device found message. After trying several different ways to do it, I made a test drive and kept getting unavailable message. I've reset the hard drive wiped clean all connections and was still unable to do a hard drive test, so I assumed that there was something wrong with the hard drive has returned to where I got it from. Then went to another bank and picked up another.

    First thing I did was a fast hard drive test and it happened.

    I tried to install e system on nw HDD image with no luck. I have never been able to implement the program of recovery since that first time. With the help of your forum, that I have que j' ai tente tried to load my picture of the system a couple of different ways but get no found boot device message.

    Have I may have something to corrupt the system on my USB key Image trying to download it on a smaller hard disk?

    I went to the view of Windows and try to download Windows 8 on an another USB and then tried to download it and continue to spread the message no boot device found. I tried this download on my g6 HP Pavilion with Windows 7 64 bit operating system. This is why it did not work because I use a computer with Windows 7 and not Windows 8?

    Thanks Bill

    Hello:

    See if you make your own plain W8 x 64 installation media works for you...

    Download the ISO W8...

    https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

    Then use this tool to make the file iso bootable on a 4 GB + DVD or USB flash drive

    http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

    If you install via a DVD, you must go into the BIOS, turn on legacy mode and disable secure boot.

  • Toshiba Satellite L50 - A battery load but remains at 0%

    Hello!

    For the last two weeks, I had problems with the battery of my Satellite L50.-a. It remains at 0%, although it will load. If I remove the power adapter, the computer continues to operate for a period of time. Now, here's the odd part. If the laptop has been in charge for a while, it stops. If I remove the power adapter it will start again and show always is at 0%, but now it works for about 1.5 hours before the battery is actually empty.

    So I use my laptop without power until it stops, then I charge for a few hours and then it stops and we start over.

    Someone has an idea that I could do to fix this?

    I tried:

    • It loads from one day to the next without using the laptop
    • Several drivers update
    • Disconnect the battery, start with power supply adapter, stop and reconnect the battery

    Hello

    Have you found a solution? I have a similar problem and cannot run the laptop with the power connected.
    I have a warning message that the battery needs to be replaced and if I do that it does not start even if the replacement battery has been charged.

  • Satellite L50-B05D - Windows 7 support and drivers

    Hi all

    Has anyone lowered successfully a L50-B05D Satellite to Windows 7 drivers and everything? I took a look at the website of Toshi at THE and the only drivers for windows 7 for the battery bluetooth.

    After talking with Toshiba support, they said to go to each site component manufacturer to look for drivers that is pretty poor if you ask to be, but anyway there are a few features as Toshiba Webcam and no matter what driver Toshiba system is that guess what? is not the site of the manufacturer (Toshiba).

    Then I read the various reports on drivers Atheros and wifi dropouts so don't know everything either.

    So before I go and spend too much time on a downgrade from windows 7 - has - what someone did that? Anyone know if the material is all 7 compatible Windows or if Windows 8 pilots work?

    Thank you

    You are right. I checked the Toshiba download page to THE and your machine is not supported for Win7 64 bit you want to install, I guess. Do not search for drivers on other pages.
    Theoretically, you can use drivers, tools and utilities available for other models supported for Win7 but you must find what model has same or similar hardware configuration.

    If you want the list here some hardware components such as chipset, display, its LAN, WLAN and we can try to find the right drivers for you.
    With Toshiba specific stuff it shouldn't be a big problem.

  • Satellite A300-1EC cannot load the OS and restart just /shuts down

    Can you help me with my problem of A300 PSAG0Elaptop.

    This is the case:
    before that I can still use my laptop normally without plugging the power cord but when plug the source ca the unit restarts all of a sudden. I charge the battery only when the unit is off. And now the worst case gets when I installed the recovery disk hoping would solve the problem. I can no longer load the operating system; It's just loading then it does not load and suddenly shuts down and sometimes simply frozen. I have not tried the safe mode, mode ahci, system recovery, system repair, and stil no chance.
    I brought this already at the center of ASP service and they demanded almost 1 unit brand new laptop for repair of my laptop is not advisable to send them to repair.
    I doubt that my system bios is not compatible with my vista Home premium OS, or perhaps my wife update of the bios that is not compatible in windows update. My current bios I checked is 1.4

    Given that I have no option instead of junking my laptop, I want to update or back to the original settings of the bios that can help to repair my device.
    Can you help me on how to update or revert to the original my system bios? As I can't access the windows can you teach me step by step using the usb port of my camera on system bios update? Or do you have any suggestions?

    Need help bad
    Here are the specs of my unit
    A300-1EC
    P / N:PSAG0E - 02J025AR
    Windows vista Home premium core 2 duo T5750

    Hey Buddy,

    First of all, the BIOS can only be updated Windows System. There is no other version that you can download on the site Web of Toshiba.

    But I doubt that this problem is caused by the BIOS. It s I knew not that it is possible to change certain values which make impossible Windows installation. With other words BIOS is secure and with all the settings, it should be possible to install Windows.
    An alternative you can press F9 in BIOS to load the default settings. That would be the best option.

    But according to your assignment, if Windows installation of recovery disc doesn t work and you are not able to charge the battery while the laptop is turned on it seems to be a hardware malfunction because seriously it has nothing to do with the software.

    So either come you into contact with the ASP to get the repaired device or you can repair yourself with original spare parts with parts ASP or second-hand on eBay or similar platforms.
    Of course, you can buy a new laptop: in case the motherboard would be defective because the motherboard is very expensive spare part, it would be the best choice in my opinion.

  • Satellite L50-B-166-build-in webcam is not recognized in Skype

    Hello

    A week ago, I bought a laptop Toshiba Satellite L50-B-166. After a few days everything was fine for about three days, neither Skype nor the device built-in photo active again. The driver in Device Manager, work correctly and I have two rooms: a Webcam Toshiba HD and a SCPO82.

    I have Windows 64-bit of 8.1.
    Who can he help me, please?

    Try to reset the initial configuration.
    To run the recovery process, switch on and press F12
    Then choose HARD drive recovery

    More details and get the step by step instructions here:
    http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

    I assumed that everything should work again start Notepad with the settings

  • Satellite L50 - B - 17 c - regional character keyboard not working properly

    Hello

    I have Toshiba Satellite L50 - B - 17 c. After upgrading the BIOS to the latest version, some of the regional Polish characters do not work.
    I'm not sure that just a rootcause is update BIOS, is also possible that other software using the same key combination.

    The keys that work well with alt together: 'e '. « o », « a », « l », « n », « s »
    Key that * does not work * with alt: 'z', 'x', 'c '.

    Anyone could help with this problem?

    Thank you very much!

    I've read about this problem of keyboard and it seems that this is caused by the BIOS.
    Wait for the new update of the BIOS. Keep an eye on the Toshiba Service Station update messages.
    Where new BIOS would be available, you should receive an update message.

  • Satellite L50 - B - 2 8 - new SSD is not recognized in the BIOS settings

    Hello

    I just bought a new laptop Toshiba Satellite L50 - B - 2-8 and I also bought Samsung SSD 850 evo 250 GB.
    When I try to install the SSD drive rather my drive HARD, the BIOS show 'none' in the category of SSD/HDD (BIOS not recognize the SSD).

    Please help me.
    My bios version is: 2.00
    someone told me that I have to downgrade my version of BIOS to 1.2V and then the BIOS recognize the SSD drive, so perhaps someone here can send me a download link for version 1.2 of my model L50 - B - 2-8.
    Thank you

    someone told me that I have to downgrade my version of BIOS to 1.2V

    And who? I mean you are sure that this person was right?
    From my point of view of the few there is no reason why beginning version BIOS should recognize the SSD and the latest version of the BIOS is not...

    But BIOS v1.2 for series Satellite L50 - B - 2 8 PSKTQE there is no v2.0 (at this time) is the latest version and previous versions of BIOS are not available for this series.

    Also, I guess you must slimply check different SSD drive... it might be possible that the other SSD drive would be recognized correctly.

    By the way: I am owner of Evo 850 SSD drive and as I remember, I had to update the firmware of the SSD drive to use it correctly in my other laptop (not the Toshiba device)

  • Satellite A500-19 q: Win 7 does not-UNMOUNTABLE BOOT VOLUME

    HY everybody,

    I work for 2 months with my new race A500-19 q Win 7 Home Premium 64 bit.
    Last night the system was regularly interrupted with the command "shutdown" of windows.
    Today, the machine does not load win 7 in all.

    If I let the work load, the system reached the blue screen with "UNMOUNTABLE_BOOT_VOLUME".
    If I try to restore the system with the recovery dvd made some time ago by the Toshiba utility him begins to load information, but after some research on hard drive, he stops with black screen and the cursor arrow, but nothing else.

    I downloaded and burt disk repair Windows 7 64 bit, but as already sad, starting the system of loading but it does not get to the end.
    So it seems impossible to carry out the command "chkdsk /f.

    What should I do finally?
    Thank you

    Post edited by: MikeB_2

    Hello

    The cursor blinking in the upper left corner means that something might be wrong with the HARD drive or partition on the HARD drive.
    I had this problem a few years ago on my laptop and in my case that the HARD drive is dead, it was a head crash.

    In any case, I think you should check if the HARD drive can be formatted using another disc
    You can try a Linux live CD or something like that

  • Satellite L50 - A - 1 6: Synaptics touchpad does not work often

    Hi guys,.

    I have a problem with my touch pad. my laptop is Satellite L50 - A - 1 6.
    Often the key stop working when I use multi touch gestures, and a few seconds later it starts working again.

    But sometimes it stops work and I have to restart the pc.
    I think it's a driver issue, but I have reinstalled the driver, hard reset on my pc, but nothing.
    If use the pc without synaptics drivers, it's all ok, but I can't use the multitouch gestures.

    You have any ideas?

    Sorry for my English

    Thank you bye

    When did you notice this problem of gesture touchpad? Has ID been published since the first day of purchase?

    It would be interesting to know how the touch pad gesture control and multi would work using the original software/driver from Synaptics page:
    http://www.Synaptics.com/en/drivers.php

    The comments appreciated.

  • Satellite L50 - A - 16 H - Webcam + microphone does not work

    Hello

    I have a laptop Satellite L50 - A - 16: updating win8.1 64 bit.
    When I got this new laptop everything worked fine, but later it stopped working.
    I sent it to Toshiba for repair and ofcouse they made and works (the MB has been replaced?), but now, I noticed that my webcam and my microphone does not work. If I try to open the camera it says 'connect a camera' or on Skype, he asks the same thing.

    I read in the forums to look at the BIOS to enable, but there is no activation/deactivation button.
    I tried to search for a driver for the Webcam in the Toshiba site but I couldn't find: c
    and the microphone "working normally" but I when I try to call my friends can't hear me.

    I hope someone can help me with this problem, thank you very much :)

    You know what: best thing you can do as the ultimate test is to backup all your data and reinstall the original recovery image. By default the BIOS settings and install recovery image.
    After ding that you will have to re-buy factory and absolutely identical situation after laptop settings.
    Please test and send feedback.

    In my opinion, if the problem persists it could be hardware related issue. Maybe is cam not connected correctly.

  • Satellite Pro C50: Installation of Win 7 using the UEFI boot mode

    I want to install Windows 7 Pro 64 bit on Sat Pro C50 (downgrade if you like - comes with 8 win), but I want UEFI boot, with GPT partitioning.
    I'm happy wipe existing partitions if that solved the problem.

    I have disabled _have_ Secure Boot.
    Win 8 install DVD boot works;
    CSM boot and boot from Win 7 DVD works - but this is not what I want.
    Definition of return to the UEFI boot and install Win7 boot media - hangs on "Starting Windows" screen
    Media _is_ good, works well on the PC manufacturers.

    I'm not convinced that it is a problem of Microsoft.

    Hello

    On Toshiba laptops, where the UEFI BIOS is available, it of necessary to disable secure boot and change the boot to the CSM mode in order to boot from external sources and install systems other than Win 8 or 8.1 Win

    Of the workarounds in the internet described the installation of Windows 7 in UEFI mode but I doubt that this will be possible on Toshiba laptops because the BIOS is different and modified for each series of laptop.

  • Satellite A205-S4797 - cannot load the hard disk drivers

    OK, got my Satellite about 1 year ago (warranty has expired in September, it took a DUMP in October) :_| thought it would be just as good as my other hand, I think that it is Vista I hate, still had some kind of problem. I tried recovery disks that they even run that it says can not find * PREINST2.swm* after several attempts I gave up and bought Vista to reinstall because it wasn't loading drivers to repair the installation.

    Now cannot yet complete a clean install. Can someone please tell me how to load my disk drivers or where I can find them?
    And now, when it starts up it says hard drive failure may be imminent at this stage, I want to just get to the top and runnig and I managed to install XP but only SP1 and all my device drivers aren't compatible.

    Been without Toshi3 for 2 months and my children took on others and now my little desk! :|

    Help, please

    Can meet us on http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=140519? ;)

    I do not understand why post you twice, but hey it's your decision.

  • Satellite Z930-14F - cannot install Win 8.1 SCCM 2012 R2 environment

    Hi all

    Series laptops Z Sattelite impossible to install OS (win 8.1) of our SCCM 2012 R2 environment.

    No installation or pxe boot interrupted error is shown.
    The environment is used in order to correctly install the operating system (win 8.1) on various other seller computers (dell) and the VMS (hyper-v and vmware).

    I tried boot UEFI and CMS options and tried to turn off the secure boot. Please advice.

    Also, I read on the 'package to install SCCM for Toshiba. This will help in my situation or it's just the driver for SCCM packages?

    Best regards, Evgeny.

    I assume you mean on this package from Toshiba:
    http://www.Toshiba.EU/services/on-demand/business-computing/sdp120gs-v/

    I put t have much experience using this drive package SCCM, but it is certainly compatible with professional Toshiba laptops. The Satellite / Portege Z930 belong to the range of the company, and I think that the package must be compatible.
    This package seems to be for all administrators that manage devices on the network of business with SCCM 2012 R2. Toshiba offers with the new SCCM Toshiba package a solution to integrate other laptop to an existing IT infrastructure quickly and smoothly and all the Driver from Toshiba and application packages and a demonstration task sequence are integrated.

    However, it seems that you could get more details about this package directly from Toshiba [email protected]

    By the way: The Win 8.1 installation requires the UEFI mode (in which case the UEFI BIOS is available). But the start of another external source requires the secure boot disabled option.
    Then maybe you should use the UEFI mode but must clear the safe boot option to boot from LAN.

  • Satellite L655D-S5050 - cannot install Win 8 due to lack of driver SATA HDD

    Hello!

    I would like to reinstall the operating system on my laptop.

    I've never had problems with this before. I am trying to install Windows 8.
    And the problem is that it asks me the HARD disk driver.
    First of all, I changed in the BIOS in compatibility mode.
    And that did not help.

    Then I downloaded the drivers for my laptop chipset on the Internet, but it did not help.
    Then I thought it might be a problem with the HARD drive. So I formatted completely. But it did not help either.

    Where can be a problem? Or maybe I'm doing something wrong?
    Thank you!

    Post edited by: vadimmelnyk

    Hello

    I think that the Satellite L655D - S5050 (PSK2LU) supports graphics AMD (ATI) and chipset.
    This means that the ATI driver package contain the SATA driver files.
    I found the driver on the Toshiba page here we [Satellite L655D-S5055 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2711088& rpn = PSK2LU & modelFilter = L655D-S5055 & SelCategorie = 2756709 & selFamily = 1073768663]

    By the way: why n t make a Win 7 to 8 upgrade as described here:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletin.jsp?soID=3437733

Maybe you are looking for