Re: Satellite L500 iCQ, as Volume Rotary control does not work

Similar Questions

• Satellite L500 - 1CQ PSLS0E - CD/DVD drive does not work - driver problem?

  Hello

  My DVD player does not work.

  There is power to it. The engine turns when I eject and reinsert. Troubleshooting Control Panel for the equipment and devices said it is a driver problem, but cannot fix it. Problem with the driver.

  I reinstalled it from the Toshiba site.
  It records in the right place?
  I am Windows 7 64 bit and chose the right driver for it.

  Should I use the 64-bit?
  I have 3 MB of RAM which was the spec when bought.

  If I wanted to change to 32 bit how you take you without the CD/DVD drive?
  Is there any point in doing this?

  Thank you

  Richard

  Hello

  To be honest I m a bit confused.
  You are not able to boot from THE disks; Windows disk, disk recovery, disk Linux?

  If it of the case, then it means that your CD/DVD drive is faulty.
  Why? Because the CD/DVD drive is recognized and controlled by the BIOS when booting from CD or DVD.

  When the Windows operating system has started, the CD/DVD drive must use the Microsoft common driver which is part of the Windows operating system.
  This means that you n t need to install ALL the drivers in order to get the job of CD/DVD.

  If you can boot from any disk, but if the CD/DVD drive is not recognized by MY computer, then I recommend this:
  http://support.Microsoft.com/kb/270008/en-us

  Before you remove the upper and lower registry filters, remove the CD/DVD drive in Device Manager and then go into the registry and remove the filters. Restart the unit.

  Good luck

• Satellite L500: WLan is de-energized and does not work most of the time

  Hi all, I have a satellite toshiba L500 running windows 7. iprimus have used wireless internet, no problem for a few weeks before that, used it via an ethernet cable as I didnth ave a wireless modem. my phone was off load the other night and went flat, next morning when I woke up and turned on, it wouldnrt to connect to internet after hours and hours of phone calls, iprimus and many resets winsock, ethernet and modem reset cable tests they tell me that the problem is in my laptop...

  So I rang toshiba... and they got forced to go in device drivers, cards, and then network and disable, actually uninstall the wireless drivers and then reinstall... and it worked... Finally... (forgot to add with the confusion iprimus someone had reset my passowrd and I had to configure to the laptop...)

  Anyway, after all of these calls, I did a full restore of the computer laptop, all deleted and reinstalled everything and then reinstall the modem. This time in the configuration of the modem, he told me the wireless network adapter was unplugged and let me only implemented via ethernet...

  now earlier today, I had the internet... but he dropped randomly... pages Web will go slow, sometimes it will reconnect, sometimes he used. now I thougbht could try and uninstall and reinstall the modem again, s soul mistake and this time, can not get the wireless at all.

  Ive google to see if others have had this problem... and seeing what others has written, I went into my battery settings and checked the WLAN will not in mode 'sleep', etc., and ive also checked everythings active. Ive no idea what do, or iprimus and Toshiba will give me answers, both companies are just to blame each other lol
  so I have
  It doesn't seem to be my laptop, as all the lights are on modem... and iprimus keep telling me its not record not not with them (disconnects) so my wireless. Although every time my laptop has left internet, so would my iphone of bfs were testing us and so did my other laptop which is partially drunk but couldn't normally always connect to the net... so as to tell me it is a problem of modem... Ive no idea what to do... and can not keep it via ethernet on the bench in the new House ive, as with 2 children less than 3 years moved in, is asking for trouble...

  someone at - it suggestions?
  Thanks in advance
  :)

  > my phone was off load the other night and went flat, next morning when I woke up and turned on, it wouldnrt to connect to internet after hours and hours of phone calls, iprimus and many resets winsock, ethernet and modem reset cable tests they tell me that the problem is in my laptop...

  That s the best way to get rid of a client who has a problem, I know that those people who don't say, this is not my problem it problem computer laptop s ;)
  I think that the guys running out of ideas.

  However, first try an update of the WLan driver;
  NEST WLan driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

  If new BIOS BIOS update would be available.
  You should also check the advanced settings of the wireless network card.
  To do this, go to Device Manager-> properties-> Advanced tab WLan card.

  Here you can choose some settings that would improve performance

  Good luck

• Satellite L500 - after Windows 7 upgrade games does not work in mode full screen

  Hello..

  I just received my upgrade to windows 7 in the mail and I installed it and all is well...

  But if I run a game that is not in the same as the computer screen resulution is a square in the middle of the screen and it is two big black lines down on each side. It does not put the game in full screen. The games in the same resulution works very well.

  Some games may be put to the resulution have this computer.

  How can I do then come in full screen?

  Thank you

  Hello

  Have you tried to update the display driver? Maybe you have an older version that is not fully compatible with Windows 7. Just check the Web from Toshiba site to get the latest version:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Normally for mode full screen in games you choose the native screen resolution of your screen there.
  Check this box!

  And it would be interesting to know in what games this problem exists

• Satellite P100 remote control does not work

  Hello

  Guys, I bought a toshiba satellite p100 and the remote with it does not work...

  no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

  Help, please...

  Thank you...

  Post edited by: qazam

  Hi Qazam

  How did you test the remote control?
  What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

  I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.

• Satellite X 200 - after upgrading Vista remote control does not work

  Hello

  I have upgrated my Vista Home Premium to Vista Ultimate and the remote control does not work. Well upgraded... I bought Vista ultimate and it installed.

  Is there a driver for my remote?

  You may need to install the infrared driver.
  This driver is required to activate the infrared port on your laptop.

  You can find it here in the X 200 section
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite Pro L10 - FN + F5 view command does not work

  When I attach my Satellite Pro to an external CRT, LCD monitor or projector, I get the same problem each end every time.

  the Fn + F key to toggle the display of control does not work.

  When I start the laptop with the attached external display device, everything is fine, and the display is exclusively channeled in the external display. but as soon as windows has started, the display switches to the screen of the laptop, and there is no way to make it back.

  y at - it an update for this problem, or another solution I know not?

  Thank you.

  Hello

  Seems to be a simple software problem.
  I put t know how long you OS runs on the laptop, but maybe some files registry entries are corrupted and therefore the FN key does not work as it should.

  Could help to reinstallation of the OS and the use of the recovery CD

• Volume up button does not work like the shutter of the camera

  I have an iPhone 5 with iOS 9.2.1 (13D 15). The volume up button does not work on it like a camera shutter. I think that it used for, and iPhone to my wife 6 with the same iOS version works fine. It is a problem, because I am using this phone with a stick of selfie, which triggers photos by simulating the volume press up button, so it doesn't work at all for me. The physical button works - I can control the volume with her settings. And when I try to use the stick selfie, I get the volume until the display on the phone, so I can see that the signal of the selfie stick is received correctly by the phone. And the stick of selfie works with my other phone that is not a problem with the volume up button.

  Work began after restarting the phone. So it's a bug to Apple report, the solution is to reboot the phone.

• Satellite P200 - Product Recovery Disk 2/2 does not work

  Hello

  because my laptop (Satellite P200 - I bought in December 2007) does not work more properly - and when, after a lot of cleaning it still wasn't working properly - I decided to start from the beginning and restore the operating system with 2 product recovery cd / dvd.

  Recovery disk 1/2 worked well - Windows Vista Home Premium product is loaded again on my computer.

  But what abot * Disck2/2 product recovery? *
  At one point, the recovery program calls for a 'supplement' but when I put in the product recovery disc 2/2 at this time, that the program does not recognize the disc. During the rest of the recovery program the program didn't ask for Product Recovery Disk 2/2, so the content of this CD-ROM/dvd now is not loaded on my laptop.

  Someone had this problem too?
  What do you have on this?
  Is this a problem for not loading the content of the product recovery disc 2/2 (I can go without it?)?

  Thanks in advance for any response!

  Artisans

  Post edited by: craftsmen

  Hello

  > Products 1/2 worked well - Windows Vista Home Premium recovery disc is loaded again on my computer.

  I put t know which modules the tool called for, but AFAIK the Toshiba image contains the operating system Vista, Toshiba drivers and additional software.
  So if you've recovered the laptop using the recovery disk Toshiba 1 then the laptop must be set to the SAME State as at the first day of the purchase.

  PS: what files you can find on the second disk?

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models

• My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

  My Vaio gesture control does not work with MO Pro 2013 Power Point and 14 Ultra CyberlinkPDVD

  Original title: control sign Vaio

  Hello

  According to my research, the actions must be enabled for individual applications. Check out the following link and activate the gesture for Power Point and Cyberlink PDVD.

  https://us.en.kb.sony.com/app/answers/detail/a_id/36487/~/how-to-configure-vaio-gesture-control-settings.

  For more help, you can contact Sony support.

  https://community.Sony.com/?XID=M:kb_header:eSupport

  Hope that the information provided is useful. Do not respond if you need more help.

• Satellite L300-22R - fan control does not work on Ubuntu

  Hello together,

  I have a problem with my Satellite L300-22R model PSLB8E-0QL028GR (Ubuntu 8.10) and the fan control. At first the fan does not work. After a few minutes, the fan operates at 100% until the laptop is turned off. I think it's a problem with acpi.

  The BIOSis: InsydeH20, worm. 1.60. There is not a more recent.

  Thank you for your support.

  Hello

  Is this laptop model is not supported for Linux and everything you find on the Toshiba download page (updates to the BIOS) is for the use of Windows XP Home/Vista edition only. :(

• Satellite L500 / 01 K - Fn (F6 & F7) do not work

  Hello

  Just bought Satellite L500 / 01 K upgraded to Windows 7 (32 bit).
  Only the key Fn (F6 F7) do not work.

  Tried to uninstall Toshiba and PVAT flashcards support utility and reintall them, restart the computer and still does not work.
  The utility of Toshiba ECO mode also do not work, but I think it's maybe because it is impossible to adjust the brightness of the screen.

  Could someone help with this. Thank you

  Hi, WML,.

  This means that all the FN buttons work without adjusting screen brightness FN key?

  It would be interesting to know which of PVAT versions and Flash Cards Support utility you used to reinstall it. On Windows 7, you need the latest versions as I know, the two should be released for Windows 7.
  Check this box!

  If you reinstall the applications, first remove all older versions. Restart your computer, and then install PVAT first. After a reboot, you can install the Flash Cards Support utility and all the FN buttons should start working.

  Last but not least utilitarian ECO mode should also be reinstalled. ;)

• Communication satellite U500 wifi switch control does not work

  Hello

  I have problem after update of the operating system from Vista 64 bit to win7 64-bit. The problem is in the wireless communication switch command before notebok. When I was with win vista, it works fine, post off - wifi off and post-wifi on (without restarting). But when I updated to win7 and install all the drivers of toshiba upgrade dvd, my wifi switch works as follows:

  When I turn on notebook with wifi off button - its turned off all the time and the wifi does not work and fn + F8 (shortcut key for wifi) does not work too. I have to restart the PC with wifi switch in position-the wifi works fine and fn + F8 is able to turn on and turn off the wifi. But that put the material do not react to pass and - diode LED is always on (in case when I start the pc with position control on and in the case where is when off wifi LED is not clear and switching does not work).

  I've updated wifi realtek drivers but still it does not work. IAM verry sorry for my English. I was looking into Toshiba diagnostic tool and there is no modem device, but yes, wifi is perhaps problem here?

  Thank you very much for the reply. Tom

  Hello

  Different Satellite U500 (and other models) supports various wireless network cards, and that's why you'll find also different WLan card drivers.

  Your U500 seems to be equipped with an Intel Wlan card and here you can also download the right Intel Wlan card driver for this card:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Satellite C50D - B - 11 X - touch pad does not work

  Hi I have a C50D - B - 11 X Satellite, I've upgraded to windows 10 and now the touch pad does not work, the cursor is located in the middle of the screen, can anyone help.

  Check if the touchpad would work after uninstalling the driver for touchpad of programs and features that you can find in the control panel...

  I'm not sure that the touchpad driver developer but the Synaptics touchpad driver or MOMENTUM... you may need to check this...

  After removing the touchpad driver, please restart the system.