Re: Satellite L500D-16Z - speakers still on when plugged headphones

Similar Questions

• MacBook Pro sound stops once the connection when plugged headphones

  On my MacBook Pro, when I connected my jack 3.5 mm (headphones or speakers) and I switched off, the sound stops once I have connection, once again. The speaker icon is gray and I have to remove and reinsert the connector to get her back. Can you help me, please? Thank you.

  Check your settings in the Audio Midi application located in the Utilities folder.

  http://support.Apple.com/kb/TS1574 Troubleshooting for any audio speakers on Macs

  
  

  Trick/Tip: Open GarageBand if installed then, open a program (optional).

  Quit out of the app from GarageBand.

  =====================

  Repair Mac mysteriously mute

  The background on the issue, is that there is a switch small sensor inside the plug headphones. When you insert a headphone jack, the sensor includes what is what and changes the setting of audio output for headphones. If you insert a jack for digital audio output, the unit switches to digital output. When you completely remove the plug, it should read the internal speakers.

  The spirits tell me that there is a very good chance that you recently had something hostage in this port, a set of headphones or a cable leading to powered speakers, for example. When you remove the plug, something in the port have prevented triggering sensor properly. That's why you see Digital Out instead of the internal speakers.

  The solution is to force the sensor to do its job. The safest way to do this is to simply run a plug in and out of the port, a few times. A large part of the time, this takes care of the problem by triggering sensor correctly. If this does not work, there may be dirt in the port. Before moving on to more invasive techniques, get a can of compressed air, plug the small tube which corresponds to the nozzle and the breath to air a few shots in the lane. With a little luck, should dislodge dirt and the port will operate as it should.

  If this does not work, find a swab to foam tip that fits (electronics stores generally carry), dip it in rubbing alcohol and insert gently into the helmet in an attempt to wipe any tenacious dirt. I recommend foam rather than cotton fleece because the variety of cotton could leave the son behind. (This same technique works well with the bad conduct of ports from headphone output on devices such as iOS devices).

  It is possible that dirt has nothing to do with it. On the contrary, it may be that the switch should just a subtle help. If a socket or a buffer does not work, I have heard people resetting successfully with a deft poke with a toothpick.

  http://www.Macworld.com/article/2031146/repairing-the-mysteriously-muted-Mac.htm l

  

• Satellite A100-998: speakers make noise when it is on current alternative

  Hello, I have a
  Satellite A100-998
  Part number: PSAA9E-0PP044EN

  My speakers make a horrible noise slope high when the laptop is plugged into AC power, but not on battery power. It happens through my integrated sound card, my soundblaster card external as well as the headphones on both ports, and they have all the latest drivers anyway, so the problem is elsewhere. Noise appears on the windows out vague, i.e. all inhibition does not, nothing 'generates' sound as a program that runs in the background.

  Can anyone help? Here is a link to the noise, I recorded with helmet attached to the microphone port, it's quite quiet, you may increase your speakers to hear it. Link: [http://rapidshare.com/files/114859161/noise.mp3.html]

  I guess it's a kind of interference, but I'm a software guy, I don't know about these sorts of things.

  Thank you
  Andy

  I doubt that the software could cause this kind of thing, looks like it could be a problem of ground or a component of the motherboard.

  I take it to a service center and get them at a glance.

• Satellite C855 - no sound when plugged headphones

  Hi all

  I hope someone can help me.

  I had my C855 Satellite - part 2F3 no: PSCBWE-0H600NEN since April and have used my headpones in it several times and it worked fine.

  I used this morning and he was working then suddenly stopped, whenever I try and play something say I can hear music sometimes, it seems not complete but always singing to music can never be heard or sounds like he's under the sea and all deformed.

  This also happens if I watch something on Youtube if there is music on the vid I am I've heard that, but not the language in the video. can someone please help me resolve this issue.

  My speakers when headphones are connected work well, I'm heading what I shouldn't...

  Thanks in advance for help you

  Hello

  I m not very well why this happens only to the connected headphones but from my point of view, this looks like some sort of sound profile was selected. something similar to karaoke etc.

  The sound chip seems to be Realtek. Therefore the DD Realtek Audio Manager should be preinstalled on your laptop.
  You should find it in Control Panel-> Realtek HD audio manager.

  I recommend you plug in headphones and check the sound profiles of the Realtek HD audio Manager.
  Maybe something has been chosen which affects the audio output through headphones.

• X 230: speakers put mute when the headphone is connected

  Hello

  My new X 230 with Windows 8 Pro is not being Mute speakers when I plug in the headphones. I have to restart with the headphones plugged so they are dumb, but when I unplug them I can't make it work again until I restart.

  The drivers are updated and verified with those that you download from Lenovo.

  If I use a Bluetooth headset, it cut the external speakers, so most likely it is one thing to jack-related software.

  Pointers? It gets really annoying, I can't listen to music or have private conversations unless I reduce the volume to the minimum unhearable.

  Jose

  I noticed that the problem occurs after the first time the PC goes to sleep. After he took over, when you plug in the headphones the speakers don't be silent.

  It worked for me, but (from another thread)

  Go to control panel,

  then the Realtek HD Audio Manager

  then device avancΘs,

  then move from classic mode to the mode of multistreaming.

• Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not work properly

  Hello

  I am trying to create a recovery for my Toshiba Satellite L500D PSLK0A-00U009 disc.
  When I run the Recovery Disc Creator he starts to open then it comes up with a box with an exclamation point, he says: 'cannot open target partition. Then the recovery disc creator will open. It seems normal, then when I insert a CD for the process seems to work then it says error and stop and ejects the CD, the error is that the code is: 0E01B5-26-510444 D 9

  I already uninstalled and then program then reinstalled with the help of a download from the Web MyToshiba site and this has not fixed the problem.

  Any suggestions?

  Hello

  Have you tried different discs from different manufacturers?
  How about you, USB flash memory usage? AFAIK, you can create a bootable Recovery USB flash stick too.

• Cannot use Logitech z-10 speakers with Satellite L500D

  I have a Satellite L500D.

  When you plug the external speakers (Logitech z 10) via USB, the sound is just terrible, with scraping etc. I installed the latest drivers.
  These speakers have their own sound card and the excellent works with all the other pc I tried them on that.

  Anyone has any idea what is the problem here?
  Would be grateful for any input which could correct the #¤ & % & ¤.

  Hi plutopus,

  Just a simple question: have you tried another USB port? Maybe the USB port doesn t tested properly try another port is simple and easy so it s worth a try!

  In addition, as wrote Al - eX you need to update your USB drivers or let's say the chipset drivers. I also are advised to remove all the USB port on the Device Manager and reboot the laptop.

  I guess you have to install additional drivers for this audio system. Did you pick the newest one?

  By the way: I can t find information on your windows. If you use Windows 7, have you checked if the PA system is compatible with the latest Microsoft OS?

• Satellite L50-B-1NM - speakers turned off when you move the screen

  Hello

  yesterday, I got Toshiba L50-B-1NM.
  Everything seems to be ok except for one thing.
  Speakers to stop when the screen is slightly moved. There are positions of the screen, when they work, but just slightly push the screen and they are now closed. Movement of the screen has no impact on its external [helmet], is without a doubt the speakers or its connection.
  I wanted to use warranty, however, I am not sure if it covers this kind of defective. Anyone know?

  And he also said: [even if the warranty is still on]
  Product not available, unfortunately your product is currently not available so please contact your place of purchase.

  Thanks for help

  Thanks for your comments... Great that you can solve this problem

• Satellite L500D - partial boot

  My Satellite L500D has been repaired four times for various problems. Now, it starts to initialize and arrives at the home page, then decides to start again?

  Can also see a blue screen with writing on for a split second when it s doing so. I scanned my computer and used windows security virus protector and nothing shows?
  While it wrong and why is it doing so. I tried to restore the system at the end of week, but there are a few points of restore zero a few months ago.

  Why the system does not restore keep a lot of points passed as windows xp. I could have restored the when she returned from repairs in December? What it can be and how can I check that my computer is ok?

  Hello

  On this virtual path, it is not possible to say with certainty what can be the problem.
  I put t know what that service with your laptop, but if you still have this problem and still best option for you is to check the functionality with the settings.

  In other words, all your data backup and install the operating system using Toshiba original image DVD or recovery recovery if you have a. Believe me this is the best thing you can do about it.

• Satellite L500D-11R - plugged in but not charging

  Hello

  I had a Satellite L500D-11R windows 7 - its fine loads (light orange deep) when it is off, but when running, it will be reduced to an orange flashing light and will not load.

  in the taskbar windows says its plugged in but not charging - unplugging and plugging back in cures repeatedly sometimes the problem

  Ive updated the BIOS to V1.50, but it still happens

  the ideas people?

  Carl

  Remove the battery and start your laptop with AC power only. When windows is fully loaded, put the battery in place.

  What happen exactly when you do this?

• How can satellite L500D-11J - I disable the microphone?

  Hello

  I have a similar problem with the microphone. All of a sudden he turned on, resonating with the speakers. When skyping it doesn't work anymore. I have a PRO SATELLITE L500D-11J. What should do?

  The microphone is integrated with the webcam? How can I set the microphone while keeping speakers on?

  Hey,.

  Theoretically the microphone can be disabled in the settings of Windows Volume. That's why you should select the input devices and disable it there all what s! :)

  In addition, the microphone is a part of the webcam and this is why you can update the driver for the webcam. Normally the microphone lights up if you use the webcam.

• Satellite L500D-M16 does not illuminate

  Hello

  my laptop won't turn.
  When I press the power button, the light comes on as if he would turn it on and nothing happens the light turns off after 5 seconds. I plug in the charger and it will load the battery and all the lights work! but still it is not turning the computer laptop ive tried taking the battery of and power cord and pressing the power button to reset it but that did not work anyone else has had this problem at all?

  It's a PC laptop toshiba satellite l500d m16

  Hello

  Check please follow document Toshiba - http://aps2.toshiba-tro.de/kb0/TSD57013H000JR01.htm
  I hope this will help you.

• Installation of recovery image on Satellite L500D

  Am trying to re - install windows 7 on Satellite L500D. I'm having all kinds of problems with the computer because it has been infected by malware or viruses, don't know that. I have already backed up all my documents, photos and files pst on an external hard drive.

  I press '0' when the power and then got the following options.

  First option is 32 or 64 bits,
  I chose 32 that the vehicle has currently 32-bit installed.
  Warns next option, I selected Yes.
  Next option is factory default software recovery (Recover State out-of-the-box). or erase the hard drive, I chose the default settings restoring.
  Then there's 3 options,
  1 recovery of out-of-the-box-state (System Recovery Options include).
  2. recovery without changing hard drive partitions, or
  3. recover to custom size partition. I thought I chose Option 1, but it shows all partitions will be deleted and you will lose all data on the hard drive.

  This means that I will delete the windows installs partition?
  Choose option 2?
  Option 2 says "the first partition is deleted and you will lose all data on the partition. I am thinking 2 option?

  On a separate issue, I could install the 64 bit version of Windows, if so it would be an advantage?

  Hello

  Detailed explanations on the recovery image installation, you can find on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  Please check it and I hope you find al the info you need there. I always use Recovery option out-of-box state > system recovery options are included.

  Your system is infected of course and you have to complete resettlement in order to not make this so complicated. Back up all your data and install recovery image using option 1. No matter what will be removed and what not. Drive HARD integer should be cleaned.

  I recommend you to use the version of 64-bit operating system.
  Very nice article about 32 and 64 bit versions OS, you can find here.

• Satellite L500D-164 - black screen

  When I start to start my Satellite L500D 164, fan works but screen remains black. Cannot start Bios.no Desktop on external screen as well.please advise.thank, you

  Hi Deborapn.thanks for the answer. The answer appears in Korean letters. Can you please write to english.thank you.

• Satellite L500D - update BIOS, covered by warranty?

  Hi, I bought a Satellite L500D in September of last year. The weekend comes, he suggested I should keep the machine etc. updated drivers so I logged on the Toshiba web site and there was a link with * New * Bios Update, i.e. After choosing the etc. good model from the dropdown boxes.

  The update seemed to work however when the machine is re-start, he went through the boot process closed however it has not started up.

  I tried to choose the boot in SafeMode etc and tried to reinstall the backup CD, but I can't get the machine to start. I have now put the machine in to authorized service center for Toshiba to fix.

  As I followed the instructions on the web site of Toshiba is that this should be covered by the warranty?

  Thank you

  Hello

  No, the update of the BIOS is not covered by warranty! This update happens on your own risk, and you can find this information on Toshiba Web site e too.

  I quote the Toshiba page:
  + Toshiba provides this information "such what ' without warranty of any kind, express or implied, including, but not limited to, the implied warranties of quality market or adequacy has a particular use. Toshiba shall not be liable to the topicality, accuracy, completeness or quality of the information provided. Toshiba is not responsible for damage caused by the use of any information provided, including incomplete or incorrect information. +