Re: Satellite L670D does not load windows

Similar Questions

• Satellite L655 does not load

  Hello

  My satellite L655 does not load, BUT it works fine when I charge the battery of my second toshiba laptop
  also does not open when I plug just the charger without the battery (led power 3min.from-no at all)

  charger works fine
  battery works very well
  tested on my other toshiba

  It works when I plug a charged battery ready.

  Any guys help?

  > It doesn't work when I plug a charged battery ready.

  It seems that there is a problem with electronic control gear.
  I mean that the laptop does not work even if plugged into the sector.
  It is certainly a problem given that all laptops would work without battery connected but connected to the power outlet.

  So I think there is a problem with the electronics which is part of the main map.

• Lenovo battery Z50 - 70 does not load Windows 8% 10

  Hi lenovo Z50-70 battery does not load Windows 8% 10

  I uninstalled the old Yang APP and reinstalled this

  were of no irrelevance that even once and adde the application in the windows store "parameters of Lenovo.

  And it does not load beond 8%

  A have you tried a new charger did not help

  text is pretty funny to 8% and 2 min at full load :-)

  Try opening the energy manager and click on settings, click on conservation mode to turn it off, then unplug the power cord and plug it back again and you should see the battery load again.

• Computer does not load Windows after reset after installing HP-J6413

  Bought J6413 all-in-one; the software that is installed according to the instructions on the CD.  Attempted to restart after the installation, the computer hangs upward after shooting intself on and display the logo of the motherboard, does not load Windows.

  Printer is off, did reset, everything was fine, Windows loaded etc.  Repeat the action and came to the conclusion that the power of the computer with the printer off left (it's a fax machine, it should be all the time) or even reset the onboard computer after, say, install new software, prevents the loading of Windows on them turn on the computer.

  Only possible mode of operation is to put off the printer, then turn off the computer, then turn on printer to serve fax standby and then do the same set of operations before turning to new computer.

  Please refer to the manuals that you received for your PC and disable the "USB Émulation" and "USB devices starting" the BIOS settings.

• Computer does not load Windows. (Missing\corrupt file and the disk read error)

  I woke up this morning and my computer screen said:

  "Read a disk error has occurred."
  Press Ctrl + Alt + Delete to restart»

  So I did, and he just keeps it again and again. I turned off my PC, disconnected from the power and took out the battery. EXPECTED, put everything back in and turned on the computer. This time he made a lot of strange beeping noises and took forever and then I got this error:

  "Windows was not start because the following file is missing or damaged:
  \SYSTEM32\NTOSKRNL.exe
  Please reinstall a copy of the above file.

  I pressed on enter and it gave me the error reading disc again.

  Yesterday I updated my BIOS. So I also tried to go to my BIOS screen and "Load factory default settings", but I always get errors that I said just above and windows does not load.

  Help =)

  Hello I would wait until you try to do the repair first

  Make sure that the hd is just a notebook size hd
  Make sure that the speed is the same thing that you already size is really for you
  before you start to have a complete set of installation discs for the mfgr
  If you only use the os disk you will not load the microsoft embedded key encode any additional programs the mfgr installed or modified specially for your computer model and the party in the form of hard disk, you will need to do it yourself the format should be identical to the new factory
  uninstall all the equipment installed after you bought the computer (you must add once installation is complete)

• Samsung laptop computer does not load windows 7, need to reinstall (no cd, no cd key)

  Samsung laptop comes with windows 7, does not load past the bottom (and even in this case, does not load the user/pw. Need to reinstall how? It did not come with a cd key and I tried to go back to the last good config and it did not work (im going with a file corrupt and need a cd key). He gets in the background, but is not past. I want to just reinstall windows 7 home 64 bit, but I miss a cd and don't know how to get the cd or the cd key for it.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Samsung, press F4 to the power upward...

  You will probably find the product key in the compartment to batteries.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• Satellite L - does not load

  OK, I just came home from school, and now, for some reason any I plug my laptop and is not recognize that he is in charge and it does not load.

  So can you help me?

  Hi phallo.

  Are you sure that all the cables are connected correctly and that the battery is inserted correctly?

  If so, I think that you can't do anything in this case. You need professional help to an authorized service, they can check your laptop. Perhaps your motherboard needs to be replaced or AC/DC adapter

• Satellite L750 - 17 p does not load Windows

  Hi all... I have a Toshiba Satellite L750 - 17 p, since a few days now, when I turn on the PC after the toshiba logo I get the loading screen and the window ms back with the inscription: system32 / drvload.exe
  MS-DOS screen remains empty and the computer doesn't load... could you help me?

  Are able to repair the system using the Windows own repair options?
  I guess you are using Win 7 because this system has been pre-installed by Toshiba.
  Switch on and press F8. Here, you choose the first option called fix my computer.
  Now you should be able to choose between several options. I think you should try the first option that allows you to automatically repair the system.

  If this option does not help, try to set the system on the last good configuration/status running

• Satellite M40 does not load before the BIOS screen

  When I turn on my Satellite M40 unfortunately it does not happened on 7/8ths blue bar going across the screen.

  That left me completely baffled as what to do.

  Apparently, it could be repaired by removing the cables on my CMOS battery?

  If someone knows how I would go all this? or have any other ideas?

  Thank you xx

  Hi Dec,

  Blue scroll bars indicate that the Wondiows operating system is loaded from the hard drive. If this process hangs while loading, then it is likely that the hard drive itself is defetive or else the files that are being loaded are corrupt and cannot be loaded.

  Interfere with the CMOS chip will not fix this problem because the BIOS has already been loaded at this point.

  If you have access to a bootable CD/DVD (such as Norton Disk Doctor) then I siggest you boot from it and running a scan of your hard drive. Alternatively you can try reinstalling your operating system of the Toshiba recovery CD but it won't replace your own data on your hard drive.

  concerning

• Help, please! computer HP laptop g72 does not load windows

  I can't get my laptop to initialize. I was it clean and running virus/spyware scans when it overheated and judgment (something he seems to do more in more often lately), I came back to the room to check on it and he stopped. He gave me the usual message about how he had disappeared in hibernation because the internal temperature exceeded blah blah blah (don't remember exactly what he said, but it wasn't the basics of it) now normally at this stage it will restart and be well and I can continue with what I was doing before. However this time it will not go beyond the second screen. It's what he does... (I will include the information in the end system)

  I press the power button then screen shows the following

  1 HP screen of the logo with the message "Press ESC for Boot Menu" at the bottom left then flashes to the next screen.

  2. starting Acronis Loader...
  Press F11 for Acronis Startup Recovery Manager... (horizontal cursor flashing after...) then flashes to view the first screen again

  and this process is repeated again and again until I got disabling or press ESC to #1 screen or F11 to the screen #2 how it will load either the menu start screen where I can access info sys diagnotics, BIOS or system recovery system.  or Acronis where I can make backup dics or start the Recovery Manager (who I'm trying to deal with the system if that is possible at this time because there are pictures and things on the hard drive that I want not deleted if it can be avoided)

  the process is normal to start but after #2 it should be blank with blinking cursor and then begin loading windows... I cannot at this point. He repeates just the first two times, I let it run for about 10 minutes at a time to see if she would do anything else, and it won't.

  System info-

  portable mode: HP G72 notebook PC (not sure what particular model because I don't know where to find this info)

  System ID: 1425

  Product number: LE846UA #ABA

  Warranty start date: 27/03/2013

  BIOS date: 08/11/2010

  BIOS version: F.26

  Processor type: Intel Pentium CPU [email protected]

  Processor speed: 1866 MHz

  Operating system: Windows 7 premium 64-bit

  I bought this computer used. The battery has never held a charge, I've always had it up to use it, but I don't know if I had to buy a new battery it would probably work. I never had the money to make and never really needed it so never bought.

  I tried to access the BIOS and it requires system administrator password. I tried to enter my password that I used to connect to windows, but that did not work. After 3 tries I have a message to disable the system with [6207076] below.

  Is there someone who can help me to fix it?

  I really don't want System recover unless there is a way to access the LIBRARY (documents, music, pictures) if I can help it. I don't have the ability to transfer all of my photos from my other computer before that happened.

  Please help me!

  Hello

  The code below should allow you access the bios menu:

  76165078

  Once, I would like to delete the password entirely - use the arrow keys to select the Security tab and press ENTER.  Use the arrow keys again to select the admin password option and press ENTER.  Enter the current password (use the above code), and then for the new password, just leave this blank and press on enter – do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

  Once completed, boot into the bios menu and reset the default settings - it may also be useful running a quick diagnostic on the HARD disk and the memory that is to be found under the Advanced or the diagnosis tab.

  Kind regards

  DP - K

• computer does not load windows xp

  computer will not load in windows sometimes happens at startup repair but still does not work
  Pentium 4

  judged fault dust stop start thank you for your suggestions

• Satellite P300 does not load

  Hello.

  I have Toshiba Satellite P300. It's almost 4 years.
  However, 3 months ago it started not not to charge the battery. I removed the battery and the computer left only with the adapter.
  Now it does not charge to one, I have to wait until electricity or sth will reach a level to start the computer.

  So, please help, if anyone has had similar problems or know the reason why and what to do.
  Maybe its adapter problem, or something wrong with the connection between the adapter and the pc. I don't know and have no money yet to check it out.

  Someone knows what's the problem? Thank you.

  Hello

  These issues can be related to different reasons;
  -AC adapter problem
  -Question-motherboard (I especially m thinking to provide electronic problem)

  But I don't think it could be malfunction AC adapter because the laptop can lights after either a specific power level reached or laptop can start after a longer time being connected to the power adapter. Is this good?

  Well, looks like a mobo problem but it's just a suggestion
  The parts must be checked first, before replacing

• Satellite T110 does not load

  My computer is 3 years old. A month ago, when I turned it on it only showed the THOSHIBA logo and a black on the screen (like its waiting to start, but he used). The assistance Center has guided me to unplug the AC adapter and the battery and wait for some time, reconnect it that.

  It worked and I left the computer until I bought a new battery thinking that was the problem (the old battery was not load more).

  Everything was ok for a few days, since I made sure the new battery will be always full, but yesterday I left it without the power adapter and the battery got completely empty - and now it turns on again.

  Help, please. TNX

  And have you tried to repeat the same procedure recommended by the service agent?
  Remove the battery and the AC adapter / CC, wait a while and then reconnect all parts

  Otherwise I put t think its battery from the laptop problem should also work with the adapter plugged.

• Satellite L305 does not load

  Satellite L305.

  Although at 4 years old, my battery is in good shape. But just started not to load while using the laptop. The icon shows connected and reduced the charge, but the percentage of left. When turned off and power left connected, the battery up to full 100 charges %. If, in-use, I cut the power and then plug the power back, the icon shows the battery charge and the symbol within properly mounted battery icon. But after a few seconds the battery symbol stops and indicates the amount of charge stored.

  Any ideas?

  If you can, try your charger on another compatible laptop and see if it is the charger that plays to the top or the software.

• Computer does not load Windows 7

  Hello

  I was using my computer hp laptop pavilion dv6 and then he got a blue screen with white text (I think the HDD problem, idk)

  I restarted the computer and my computer was not able to load my Windows 7 operating system. I already tried safe mode, I tried the repair option. The computer tried to fix for 7 hours without any result. I already tried reseting with Windows recovery disc, didn't work... Solution?

  (Sorry for English, English is not my main language.)

  WSEOIT wrote:

  Hello

  I was using my computer hp laptop pavilion dv6 and then he got a blue screen with white text (I think the HDD problem, idk)

  I restarted the computer and my computer was not able to load my Windows 7 operating system. I already tried safe mode, I tried the repair option. The computer tried to fix for 7 hours without any result. I already tried reseting with Windows recovery disc, didn't work... Solution?

  (Sorry for English, English is not my main language.)

  Hello

  Well, it seems that the defective material only could be the hard drive. Perhaps it is too damaged a lot to make it work again. Get a new hard drive I guess. You got recovery discs so that there will be no problem to do work again.