Re: Satellite L675-10 t black screen after disassembly problem

Similar Questions

• Satellite A200-130 - had black screen after BIOS updated

  I have Satellite A200-130 I install a windows Vista OS with success and after that, I have saved all the driver I DOWNLOAD and put on a single folder... but then I accidentally open the configuration files of the BIOS that is "setup.exe" with the file "skae180a.rom".

  BOS update starts automatically and I can't cancel it because my keyboard doesn't work simply do not. Then the update fails. I tried to restart my laptop using the touchpad and after reboot I just get BLACK SCREEN and HD led flash just once and my CD/DVD drive is displayed for 5 seconds and nothing happens.

  Now my laptop remains the same... just 'black screen '.
  Can someone help me on this matter? I really need this laptop to be repaired.

  Hello
  I had exactly the same problem with my laptop A200, I spent so much time looking for a solution to this, I tried all the solution I got the net fourms but not at all, 100% bios chip be changed by ASP.
  UOP now I'm not sure that the A200 bios chip can be changed or I have to change all the Mo.
  I'll send it to ASP.

• Satellite L450 (PSLY0E) - a black screen after BIOS update

  It seems I have "brick" my phone during a bios utdate that went wrong... black screen as suspect: o.

  The laptop is a Toshiba satellite L450 (PSLY0E)
  The new bios image is named "bwaa150a.rom".

  Anyone know if it is possible to recover the bios of the flash or floppy drive, using a sort of toolfrom recovery inside the bios chip?... .or something?

  Anyone know who is the manufacturer of this bios?
  If I rename the bios image during a recovery, what 12xxxxx be named?

  To my knowledge, it is possible to reflash the EPROM module using the special procedure of crisis of the BIOS. But this crisis BIOS disk for Toshiba computers laptops isn't available for download.
  This must be done by authorized maker Toshiba.

  But I also read in the forum about those who tried some discs of crisis 3rd party BIOS.
  Sometimes it worked, but in most cases, you need advanced help technician.

  However, to use the forum search option advanced to search for similar topics on crisis disk BIOS. Otherwise, as I said above: you last chance might be the ASP.

• Satellite C660-10 d - black screen after adding extra RAM!

  Hello world

  I have a laptop Toshiba Satellite C660-10 d and have recently bought a 2GB additional RAM to upgrade my laptop to 4 GB in total. The RAM stick is identical to the 2 GB ram origin that settled in the laptop.

  I added the extra ram and when I turn on the laptop the screen remains black, however the laptop fans can be heard etc. When I remove the extra ram com starts up fine and shows the windows login screen. I also tried the two ram sticks on their own to slot 1 and both work well, its only when they are both in the connectors that I get the black screen.

  Any help asap would be fantastic.

  Concerning

  Griff

  > When I remove the extra ram the com starts up fine and shows the windows login screen.

  Its a problem with your extra RAM module.
  Is not fully compatible.
  Recommend you use two identical Kingston RAM modules, these modules are great, tested and provide good quality.

• Satellite L40 - 14 H - black screen after BIOS update

  Hello!

  I have laptop Satellite L40 - 14 H (PSL48E). I installed Windows XP, it worked fine, except the keypad is lit permanently so I couldn't enter a few symbols. I decided to install the special BIOS for WinXP, which downloaded from the Toshiba web site. The PSL48x model is in the support list. Change the windows flashing and reboot, I entered the BIOS to see what has changed. I saw nothing new, so I leave the WOOD and restart again.

  Since then, turns on the phone, but the screen is not, it is black :-(((
  Please help me, how can I save to live?
  Thank you, Eugene.

  Tried to connect it to an external monitor?
  If this does not help, you will need to go to a SPA to take a look at your machine.

• Persistent black screen after startup on Satellite Pro A210 (PSAFHE)

  Need help, need advice on how to solve a persistant problem with black screen after put into initial service.

  Initially its fine but after the initial Toshiba of the screen just goes black, and the rest in this way, the PC stays on. Have you tried F8 options but all result in the same.

  Help please.

  Hello

  You can access the BIOS by pressing F2?
  Boot from a boot as Recovery DVD disk?

  If both is not possible, I'm afraid you have a serious hardware problem m.
  In this case, I get just speculate on the affected parts. Maybe his problem GPU or motherboard who knows

• Black screen after startup - Satellite A105-S4334

  It gives me black screen after the display of the logo just after the appearance of the cursor and nothing I can do except hold the button 'Disable' of windows, and then restart again, it shows the menu to make it start in safe mode... network mode... normally or lastest know good windows start...

  When he starts for the second time it works very well, he does it all the time and now I'm reinstalling windows for the 2nd time (factory State) any solution or explanation for that matter?

  Hello

  It is not easy to say why this is happening. Have you standing connected an external device, such as USB, printer or something similar?

• Satellite M70 - black screen after the installation of recovery

  So far, what I did is put in the Recovery DVD - ROM product. Then when my computer restarts I was invited to restore my computer failing and said. After that he went through this process, that he told me to remove the disc that I did. Now he only get a black screen after the Toshiba screen that gives me options f2 for Setup and f12 for options.

  I don't know what to do now to make my laptop works again. Help, please.

  Hi Zach_1,

  Have you tried to launch the installation of recovery again? Maybe that something was wrong during the first installation, it might have arrived
  Then retry the recovery facility and see what happens.

  If it doesn't work you should try a normal Microsoft disk so determine if the problem is related to hardware or recovery disk.

• Satellite X 205-SLi3 - black screen with the mobile mouse at startup

  I have a computer laptop X 205 - Sli 3 satellite, which is a little more than a month and running windows Vista. (let me know if the exact specifications make a difference)

  Yesterday morning my laptop was working fine, I arrested him at home because I need to take to work with me to get some files there. However, when I tried to turn it back on all I got was a black screen with cursor mouse mobile white dead center. I saw other posts with similar problems, but no solutions.

  Loads everything up as normal at the beginning: I get the Toshiba load screen (this allows me to make changes to the boot from there with F2, F8, F12 or, but none seems to have no effect) and I get the little green loading bar of Microsoft just before the screen blinks a few times and then turns black except for the white mouse. The touchpad, Capslock and scroll lock keys * are * admissible, but the function keys and Ctrl + Alt + Delete to do * not * work. There is no way to stop the laptop at this point without maintaining the power button.

  I tried to start in safe mode, safe mode with networking, safe mode with command prompt, only to get exactly the same result after Windows loading bar. (only a lower resolution on this beautiful Virgin high-def screen mouse cursor). I activated the boot record, nothing, I tried to start with the "last known good configuration", nothing.

  I tried windows repair options: repair system, System Restore (it * was * a windows update just before restore point in my laptop screwed up and I m wondering if that has something to do with it because it was the first time the computer was turned off since the auto update installed... but get an older restore point does not help) , as well as the windows memory diagnostic tool. Everything is displayed normally but still black screen after the loading bar Microsoft...

  I also tried the debug mode, and directory services restore mode just for the heck of it - each time the black screen of death.

  I even put in the Toshiba recovery disc and put my laptop to boot from the CD rather than the HD (it gives me the same options by pressing F8 and go to repair are starting only I didn't have to put my admin password)

  The only thing I can think that I n t done is format my whole hard drive, I know that this is not always a solution, and I prefer to keep all my school and work files if possible. Fortunately I am able to get into the command prompt BACK and some of the most important things am copy on a USB key, but I'll still probably lose all my programs and larger files.

  Someone had a similar problem?
  If so, what was the solution?
  I would call all technical support, but I won't have time until after the new year to spend on the phone and I have a feeling that their solution will be to format and use the recovery disc.

  Man, such an expensive machine and then all this work of wouldn because of some software sh... So, if you have backed up your most important files, then, I would _recommend_ you to recover your machine. Won´t solve you anything just trying to find the error, believe me, you'll go nuts.

  Just put the recovery in the drive and start the process of "delete-all-my-programs-but-protect-my-nerves-and-make-everything-OK".

  Welcome them

• Pavilion 15 - p065tx: Pavilion 15 - p065tx, black screen after BIOS update recommended by HP assistant

  System reboot with black screen after accepting the update of the BIOS recommended by HP assistant this morning. AC power on at least three hours of waiting after the process completed successfully with auto update reboots always.

  Power light is on. Wired broadband light is turned on. Light CAP LOCK keyboard and led speaker hold noway.

  Hard reset has been tried 3 times with no improvement.

  External monitor is connected but no signal has been out of the laptop, screen is black.

  Done a few times this page to reset the BIOS setting blindly:

  http://support.HP.com/us-en/document/c02217843

  BEEPS heard when you press F10 or F5 during procedures. But still black screen.

  What can I try again?  Please advice kindly!

  Hi @ sokw,

  I have read and reviewed the post. Thanks for your reply. It seems that bios is damaged, and that is why the computer does not start. As it cannot be fixed by any software troubleshooting, you will need to contact the HP support by phone for the machine.

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well. Believe me, I've done everything I can to help by keeping your interests in mind. Please reach out for questions and I'll be there for you help.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Black screen after flashing to latest BIOS

  Nothing but black screen after flashing the latest bios (fan, leds work)...

  I can do, or that of new bios/motherboard can help? (I tried to rest the battery, press F8...) Thanks in advance

  I presume that the BIOS is doomed. What you need is a professional help with this then contact the nearest service provider and ask for help.

  By the way: check this forum using the advanced search option. In the past, I have seen several interesting discussions on BIOS recovery. I m quite skeptical on this subject but maybe you will be lucky and find the solution.

• Black screen after the mode 'sleep'

  My laptop never wakes fashion "Eve" and just keep with the dreaded black screen.

  If anyone has had this problem or have solutions?

  I am currently using a hardware, operating system.

  This message can help,

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DV6-black-screen-after-sleep-mode/TD-p/527033

• Satellite L850 - 17 k - black screen with blue dots

  Satellite L850 - 17 k black screen with blue dots see photo
  It is THE video card, can't find it.

  See photos

  If you see the same on internal and external display LCD, I presume that the video card is faulty.

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• Qosmio X 870-149 - black screen after update to 8.1 win

  After an update to win 8.1, I got a black screen after connection, the only thing I could do was to press zero when starting and make a recovery facility.

  It took 40 hours, I don't know why it took so long, but when it was over, the HARD drive was completely empty, so I installed win 7 instead, because I had not done? a restore CD. The problem now is that I still get black screen between the two, and think it might be a heat problem, I still have the warranty, but I don't know if it applies when I installed win 7 on the machine.

  I still have a warranty on my Qosmio toshiba

  Hello

  Well, the guarantee covers material related problems. It does not any problem with the software.

  Now the question is: why the black screen appears?
  Is - this problem is hardware or software?

  What happens if you access the BIOS?
  You don't see anything on the screen?

  Something is visible on the external monitor?