Re: Satellite L750-11w - horizontal lines appear on the screen

Similar Questions

• Satellite P30 - three vertical lines appeared on the screen

  I have a problem with the display on my p30 110 three vertical lines appeared on the screen, the pc has been scanned with three different antivirus programs and seems to be clean any suggestions would be helpful

  Hello

  These problems usually occur due to a malfunction of the equipment.
  But have you tried to update the graphics driver. If this isn't the case, so I recommend to do.
  The update may solve some problems.

  However, if vertical lines persists then you should ask Toshiba service for assistance.
  He must check the laptop.

• Satellite P100 - thin yellow line appears on the screen

  Hello world.

  I have a Toshiba Satellite P100, 3 years ago.
  Recently appeared on my screen an intermittent thin vertical yellow line.

  Nothing serious, but very annoying, especially when I play or watch movies.
  I just found that it is not a software problem, but a material one (I've connected the laptop with my TV and there is no yellow line shown on the screens).

  So I guess there is something wrong with the LCD of my Satellite.

  You think it's interesting to try to fix this? What can I do?

  Thank you

  Hello

  > So I guess there is something wrong with the LCD of my Satellite.
  Maybe

  Always is that those issues could be related to a defective LCD screen or graphics chip
  But given that this line is not visible on the TV or external monitor this could be an internal screen problem and not a problem of graphics chip

  > You think it is worth trying to fix this? What can I do?
  Well, a laptop screen is not a party so inexpensively.
  It costs about 300-350 Euros and I wouldn't try to replace it if the warranty is no longer valid

  Welcome them

• Satellite P100: think that line appears on the screen during her watch low resolution movies

  Hello

  My laptop is Satellite P100 with T5 cpu dual core and go7900 gs video card, 2 GB of ram
  Because my laptop is new, I discovered a strange problem about the video card driver.
  When I look at any kind of movies Sony handy cam, at the top of my 17 inch will display a line of thinking, and what's supposed to be shown here (desktop icons,...) is moved to the bottom.

  I can fix that only if I change the resolution of my screen. I want to mention info film is: mpg 2 (format maxim) NTSC, 24.97, its 48 kHz dolby ac frame.
  I think that it is a driver issue, but I'm not shore, that's why I need support.
  Please what can I do to solve this error.
  I have the latest video card driver and bios of the Toshiba site.

  Best regards to all!

  Hello

  This problem also occurs with other films (movies high resolution)?
  Have you tried different video players?

• Re: Tecra S1 - weird lines appear on the screen

  I have a Tecra S1. It has the graphics card ATI Radeon 9000.

  When I turn on the strange machine lines appear on the screen... and blocks to move on the screen when you use the operating system.
  Basically, it seems very strange. I think there may be a problem with the graphics card and I was wondering if Intel has left the jury on the graphics chip on the system and if it was possible to switch to him?

  I've had the laptop hooked up to an external monitor and the same problem on screen exists, so there is no problem with the screen that I can tell.

  If anyone has any other suggestions, what could be the problem I would be interested as well.

  Thank you

  Paul.

  Hello Paul

  If the same vein occur on the external monitor, I'm sure it's because of the faulty graphics card. The graphics card is part of the motherboard and it cannot be exchanged separately. Sorry, but in this case, the entire motherboard must be exchanged.

  I'm pretty sure new costs a lot of money, but only a chance of getting is cheaper is looking for used one. Maybe you should check eBay. There you can find a lot of laptop parts for models of different laptops. Maybe you will be lucky and find mainborad for your Tecra S1.

  Good luck!

• Blue vertical line appear on the screen of the series M Satellite

  I had a blue vertical line appear on my screen its about inch thick and is at - it start, can someone tell me if I can get rid of him? Thank you.

  Hello

  If this blue line is present from the first second after turning on the laptop that I presume it's because of the faulty graphics card. To be sure try to connect an external display to see the same thing will happen. If Yes, it is the evidence that this line occurs due to faulty hardware.

• Satellite X 200-line appear on the screen and the computer to stop responding W7

  Hello

  I installed windows 7 a few days ago. I have download all the drivers, but:

  After starting the computer and connecting to windows, if I run an application too quickly (perhaps outlook, google chrome, internet explore explore...), it seems that the pilot does not display (and windows try to restore), and lines appear horizontally on the screen (only have 3/4 left of the screen, the right 1/4 is normal: S). after 30 seconds the screen goes black, and 15 seconds later, a beep comes from the laptop. After that, the only solution is to stop via pressing 5 sec the power :(button

  My graphics card is a nvidia geforce 8700 M GT. I have trid the drivers on the toshiba site (but this is for vista, W7 those not released... for this laptop). It changed nothing, so I download them from the nvidia site (one graduate and Beta 1), same result, it has not changed anyting... (I precise that I uninstall all drivers before reinstalling the new)
  So, I have updated the bios, nothing better.

  I read a solution on the microsoft Web site (for example to remove 5 keys register HKEY_USER /.) DEFAUT/control panel/Desktop and HKEY_CURENT_USER/control panel/Desktop), but these keys did not exist on my system, it couldn't be that.

  So, I'm in the wall.
  Someone has an idea?

  Thank you

  Post edited by: noescape69

  After many internet research, I found an interesting answer, and it was my solution!

  On the nvidia site, you can go the archived drivers.
  For mine (geforce 8700M GT), there are 179, 185, 186 and 195 immediate release. I have download the 179 (oldest), and... everything works great!

  My problem is solved.

  Hope this will help other people!

• horizontal lines appear in the photos when printing

  I'm having a problem with printing photos in an indesign document.  When photos, jpeg files, are placed in the document and printed, there are small black lines that travelled horizontally through photos to a half inch.  These lines run through only the photos, not the rest of the document, and they do not appear when the photos are printed separated, and not in an indesign document.  This may be the cause?  Is there a guide that I accidentally put under tension which might be the cause?

  Thanks for any help on this matter.

  What version of InDesign and operating system? InDesign is fully patched?

  Your printer has a dragt mode and it stops in the driver?

• Satellite P30 - straight line appeared on the screen

  Hello all 2

  yesterday a vertical straight line cyan (1 pixel thin) appeared at my laptop screen, the line is not constantly on the screen, but randomly disappears and appears once again, (the problem is not about the operating system or resolution settings)

  I wonder if there is a way to diagnose is the failure caused by bad monitor (screen) or possibly inverter (it's in the bottom of the screen monitor)

  There is no chance that the prob.
  Is caused on the external monitor because the graphics card everything works fine.

  Thank you

  Hello

  It's not easy to say what could be wrong.
  As you say it s not a graphics card but the TFT or the FL inverter may be defective.

  You can only find what s wrong by checking and replacement part.

  I put t see another possibility to contact a technician from laptop to laptop control.

  Good luck

• Vertical and/or horizontal lines appear in the FSX cockpit at any time during the game. System hangs. Happens all the time.

  I am extremely frustrated by this problem.

  I have FSX and acceleration installed on my system. My system config is: 9450 Intel clocked at 2.67 Ghz on an EVGA 780i motherboard. 1100 watts of power. A graphics card nVidia 8800 GTX, 4 GB of RAM running Windows 7 64 bit. All the drivers, hardware and software are updated. All programs run fine EXCEPT FSX, which is my main game I use.

  V Sync is set to "Power On". FSX loading is correct. When I'm in the cockpit there is a 'sparkling effect' on panels of light from the windows, etc. At any time during the flight, all of a sudden, vertical lines appear, get worse then everything crashes or I have to manually shut down computer. I adjusted and adjusted re all resolutions, uninstalled, reinstalled the program, changed and changed everything and nothing seems to fix the problem. This also occur frequently with add on such as Captain Sim 757, etc.. Captain Sim told me that it was a "matter of Microsoft."

  Help, please!

  Thank you.

  Paul W. Norman

  Hi pauln49,
   
  have a. you been able to play this game earlier on your computer with no problems?
  b. changes made to your computer recently?
  c. do you receive any error messages?

  Check the last update for the game and install it.
  http://www.fsinsider.com

  Also, try the steps outlined in the article.
  http://support.Microsoft.com/kb/303032

  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Horizontal lines appear in the acquisition of grab after awhile

  Hello everyone, my system is using 4 cameras. This system worked for about 3 years and never had a problem with that. But now, when I start my process for less than an hour, I begin to see horizontal lines in my image acquisition. Even when I close all my VI, that too in MAX. For the Christmas holidays, I turn off the entire system. When I started everything back, chassis PXI My was not at MAX. So I finally understood that I had to open the PXI chassis before you open the computer. But, in doing so, I lost a few seting I managed to retrieve backups. Is there a MAX seting who could do that? A seting that could have a link with the image buffer? I also get errors about the acquisition of IMAQ I ever had before to "IMG_ERR_TIM0" thank you for your help.

  
  

• Satellite A100-683: small lines running through the screen

  Hello

  I bought my Toshiba A100-683 for a month.
  The problem is that I sometimes see small grayish lines that passes through the LCD from the top to the bottom.
  This is are the type of lines u see also when you use your camera (phone) to make a film of a monitor / lcd screen.

  I still see them and seem to appear randomly.

  I updated my video card drivers, but this does not solve the problem.

  Is anyone familiar with this problem? Or knows a solution for this before I send it for repair.

  FEATURES OF THE LAPTOP:
  Date 10/14/2006 12:00:44

  Modelname Satellite A100
  Onderdeelnummer PSAA9E
  BIOS-version 2.00

  Greetings from Holland,

  Gaston

  Hello

  It's not very easy to say why these small lines are through the LCD.
  To tell a truth, I can't imagine these lines. I've never seen this show.

  However, try to update the BIOS. There should be new BIOS available that solves the problem with the blurry background on A100.

  Note: Make sure that you use the BIOS and the BIOS correct procedure.

• IPod nano 7 icon appears in iTunes, with Windows 8 or IP on both computers. Two nano 5s work perfectly. Short black lines appeared on the screen iPod

  NO icon of nano 7 will appear on iTunes despite trying 2 computers, Ip and win 8. Also tried two nano 5s and several cables and ports. Also, some black lines on the screen.

  What is "Intellectual property"?  Did you mean to type XP?  There is no iPod nano "5s". are these 5th gen iPod nanos?  Why do we say "iPod nano (6th generation)" in your profile in?  It's the iPod nano with the gen 7 problem?

  If the 7th gen iPod nano is new (model 2015), it does not work with a version of iTunes that runs on Windows XP.  It should work with the current latest version of iTunes on the computer of Windows 8, however.

• Satellite P105-S6114 - gray line vertically on the screen

  Hello

  I'm new to the forum so please excuse me if I look like a novice (because I am).
  I have a Toshiba P105-S6114 that suddenly developed a gray vertical line about 1 inch wide and about 3 inches from the right side of the screen. It seems that if it is washed out. You can not see on white screens but is very sensitive to all other colors. It appears when you start the laptop to search on the net, I think while it is on the screen. What is the screen? or something escapes me?

  Please correct me for false assumptions in my post.

  I started pricing new screens. Locally for installing I got a quote of less than $500.00. I saw on ebay (new) about $280.00 aus replacement screens. Installation I expect about $100.00. If someone knows a cheaper solution, I would be very happy to hear it.

  I saw a screen for a P105-s6062 that appears from the PDF file to be identical to the S6114. It is second hand, but sounds like a viable option. Does anyone know if the screens are identical, including the connections?

  Someone at - it any other suggestions? I'd be happy to hear from someone as the laptop itself is large and I don't really want to get rid of it.

  > It appears when starting the laptop to search on the net, I think while it is on the screen. What is the screen? or something escapes me?
  It might be the screen of laptops, but it could also be a malfunction of the graphics card.
  If you first need to know what's exactly wrong.

  In your case, I recommend you to connect a second external monitor to the laptop.
  Then check if the same vertical lines appears also on external monitor.

  If the same could not be visible on the other display, the chances are high that a graphics card is malfunctioning.

  In this case a replacement of the motherboard would be necessary and this would be a costly affair!

  Anyway, in both cases, I would recommend contacting the ASP in your country.

  Good bye

• Many lines appear on the screen of Qosmio F10

  Hello

  I have a problem with my Qosmio F10 screen
  I see a lot of lines on the screen. And I have to disable the VGA driver or run the screen by using the options below.

  I plugged the laptop with external LCD display, and the same problem appears!

  That's why am sure it is a problem of VGA card

  What is the solution?
  Should I change the whole motherboard? And I can't part used rather than buy a new one? Because it will cost me a lot! And where I can good.

  Another question, yesterday the screen was simply awesome! I don't know what happened, I just with leaves the laptop that works for about 10 min and when I came back, I found that it works very well. After the reboot, the problem appears again!

  Is it possible that the chip is (half broken) and could be fixed?
  Or should I get the new motherboard?

  Thank you

  Hello

  Unfortunately, it seems that the solution is not good cheap!
  Graphics card chip malfunctions and it seems that the whole motherboard must be replaced! The motherboard is one of the most expensive laptop outside the internal display parts.

  Sometimes the graphics card work poorly due to overheating and high temperature inside the laptop.
  In this case, it s always advisable to clean the cooling modules.
  This can be done easily by using the hose of the vacuum cleaner.
  But please be careful.

  But if this procedure will not improve the graphical situation then the graphics hardware is certainly defective and only replacement could help!