Re: Satellite L755-13 q: WLAN N (802.11n) not visible, how to enable it?

I have a Satellite L755-13 q which is sold with a compatible 802.11n wireless network WLAN but the WLAN n are not detected by my computer.
The N-WLAN is detected on another computer.

I have driver updates Realtek RTL8188CE since the download from Toshiba site.
Driver for the type of network option is well-defined on 802.11b/g/n. other B-WLAN is detected by my computer.

Have you ever seen this problem?
What could be done to enable detection of the N-WLAN?

Thank you and best regards

Hello

Are you sure that the wireless network adapter is set to Draft N (802.11 N)?
In the Device Manager-> card WLan-> properties-> Advanced tab, you can check if the Draft N is enabled and set.
http://APS2.toshiba-tro.de/KB0/FAQ7B020B0000R01.htm

If it s set and the laptop would not recognize the Wireless N network, then you must update the WLan driver. I recommend you to choose one page Realtek.
Of course, you can also test the driver here:
http://APS2.toshiba-tro.de/WLAN/

It could also be a problem of compatibility between the card and the router.
Some WLan card supports the standard 802.11 N standard to 2.4 Ghz band so if your router supports 802.11 N only at 5 GHz then local laptops network card would not receive this network.
http://APS2.toshiba-tro.de/KB0/TSB0502VM0000R01.htm

Tags: Toshiba

Similar Questions

  • Is Satellite A660-156 supports the IEEE 802.11n standard?

    In my laptop Satellite A660-156 in Windows 7 shows Device Manager that you have installed the card WiFi Broadcom 802.11n, but your site Internet officially supports only wi - fi b/g standard?
    This laptop model really does support 802.11n?

    Hello

    As far as I know the Satellite A660-156 was equipped with the chip BROADCOM BCM94313-HMC WLan.

    I have goggled a bit and found information different s; some chips support only 802.11 B and G and some chips seem to support the standard 802.11 N as well.

    I think you can check this option in the Device Manager-> card WLan-> properties-> Advanced tab.

    There, you should check if 802.11 N is available too.

  • Satellite L755 after error - BIOS update service is not a warranty case

    The problem began when Toshiba Tempro program notified me that I need to update bios for my laptop Satellite 755. I have downloaded the file to the Toshiba site, followed all the instructions. The process - there was error check. Tried twice. The same result. Decided to not update at all.

    But after that the next reboot of the laptop has not started. Black screen, cooler works like breathing.
    After searching the Internet I found there are hundreds of people with the same question. Which of course was not my fault.

    As there is no solution for this - the only way was to send the Toshiba laptop service.
    I wrote them a letter before, provided all the details, what happened. Also asked if it would be covered by the warranty. My laptop is still on warranty, purchased just half a year ago.
    Received an email from to SAV (Damax AG), I have to send my laptop and that * it's still on warranty *.

    Without any hesitation I sent them my laptop.

    After several days, I received a note that:
    1. it is not a case of warranty I was updating the BIOS. Come on guys, I wrote it you before I sent the laptop!
    2. for the repair of motherboard, I need to pay 1350 (!) swiss francs (the price for the new laptop is about 600 Swiss francs!).
    3. I can refuse the repair, but in this case, I still have to pay 100 Swiss francs for diagnostics.
    Why the hell should I pay for the diagnosis, even if the laptop is still on warranty + it was pretty clear what the problem was, like many people in the face of that, and Toshiba service for sure shoud be aware of this problem.

    What could advise you in this situation?
    These are the sons of the same question. I'm sure this is the problem on the side of development of Toshiba.

    http://forums.Toshiba.com/T5/drivers-and-utilities/satellite-L755-S5216-BIOS-2-0-update-leads-to-quot-verify-error/TD-p/203226
    http://forums.Toshiba.com/T5/computer-troubleshooting/laptop-L755-dead-after-BIOS-install-attempt/TD-p/205326
    http://forums.Toshiba.com/T5/system-recovery-and-recovery/BIOS-L755-beware-of-Toshiba-fix/TD-p/270171

    Also, there are many cases that people have written that it is covered by the guarantee - which was one of the reasons that I sent him. For example here:
    http://www.theeldergeek.com/forum/index.php?showtopic=45500
    The guy writes: + "guarantee-box...". 0, no data not deleted, everything goes well =) ' + '.
    How even a service covers it - the other is not?

    Also, I read the guarantee agreement - I have found no info that this case is not coverable.
    Really frustrated by all this, I am a student, and of course I don't have extra 1350 francs to pay for it.
    Also, I'm really screwed as it has research papers which I can not finish normally like all my data on the HARD drive.

    Hello

    Please don t get me wrong, but I don't really know what you want to read here. It is user in the forum and here you will not find an official statement here. All you can do here is to share your experience with others who have the same problem.

    I put t know how many services are listed for your country, but please try to communicate with other services and see if they will tell you the same thing or maybe there's something now about this BIOS problem.

    If you have more information, please report it here. It may be useful for other owners of L755.

  • Satellite L755 - 16 K BD - Rom Drive is not reading disks

    My drive Satellite L755 - 16 K BD - Rom is not reading disks
    My OS is Windows 7 (64-bit)

    so, how can I fix?

    Good question. It will be nice if everything should be easier.

    Do you have problems with all discs or just some specific discs?
    Have you tried to clean the lens?

  • RALink 802.11n not recognize 5GZHz

    I have a Ralink 802.11n Wireless LAN Card with a driver just updated, version 5.0.9.0, date 27/11/2012

    The card connects fine for the 2.4 GHz network, but not my 5 GHz.  I have another laptop and the views of the wireless card 2.4 and 5 networks very well.  I am connected to the 5 on my laptop and iPad...

    Running Win7, all patched.  I tried to move the chains on my router without effect.  I want to get this HP machine on my 5G network because I have all of the kids on my 2.4 and turn off the wireless at 22:00, I need to use my PLEX server on this box after 22:00.  Any help would be greatly appreciated.

    Thank you!

    Hey Paul, I think I thought about her.  A look at the specs on the map and he says that it only works on the 2.4 GHz band.  Thanks for your help

  • Satellite A660 - WLan Broadcom 802.11n very slow on Win 8

    Hello.

    I have a Satellite A660 PSAW3a 07r00r and my speedtest is usually 12 or 13 MB/s
    After you have installed Windows 8 64 bit, my speed went back to 2 or 3 MB/s.
    All my other computers are still at 12 or 13 MB/s.

    I tried the drivers 64-bit windows 7 as well but no luck.
    It seems to be a common theme when I googled.
    My broadcom driver version is 5.60.48.35.

    Someone at - it solution or something for me to try?

    Thank you, Will.

    Hello

    As I m not wrong the 802.11 standards (B/G/N) WLan wireless card BROADCOM BCM94313 supports.

    What Wlan standard are you using exactly?
    The Wlan standard can be changed in the Device Manager-> card WLan-> properties-> Advanced tab

    Given that the wireless network adapter supports 802.11 B / G and N, the 2.4 Ghz frequency is supported.
    This means that max 54 Mbps transfer rate is supported
    But it's just a theoretical value. You will never get to 54 megabits/s usual speed would be ~20Mbit/s = ~ 2.5Mbyte / s

    As you already get 2 or 3 MB/s, everythign seems to be OK

  • Satellite L300-135 see WLan network but will not connect

    Well well, (new laptop) initially, it worked with my BT hub at home... then decided to not stop working - receives no signal or response from the router - even though other laptops in the House can connect without any problems

    and now the Wireless does not work - IE. I can see the wireless connection but cannot connect.

    I don't know that the wireless is not cut (until someone suggests)

    I looked for more up-to-date drivers, but nothing seems to work.

    Help, please!

    Hello

    First of all, you should check if your wireless network card is correctly recognized.
    I mean to check in the Device Manager!

    Your wireless network card must be the Realtek 802.11 g (RTL8187B)
    Download and install the latest driver WLan in the Realtek page.
    Then update the BIOS.

    Finally, reconfigure all WLan settings.
    In the Device Manager-> properties-> Advanced tab card WLan disable energy saving settings and check the other parameters that may affect the connectivity.

    Good luck

  • Satellite M30X-113: the Wlan card 2200BG is not compatible?

    Hello
    I want to replace an Intel PRO/Wireless 2000.
    The network adapter Intel® PRO/Wireless 2200BG with Satellite M30X-113 is compatible-so?

    Hello

    In my opinion, you can use the WLan Intel 2200BG card in your Satellite M30X-113.
    The card should work properly.

    PS: you need to connect also the two cables correctly to the antenna.

  • Satellite Pro L300-1FL - WLAN network adapter does not exist

    Model: Satellite Pro L300-1FL (PSLB9E)
    Operating system: XP Pro SP2
    Wireless card: PA3616u-1mpc (atheros AR5007)

    the laptop came with pre-installed vista, everything worked very well (including wireless), although a little slowly, but decided to downgrade to xp. integrated SATA drivers into my xp with nlite installation disc. XP installed fine. visited the toshiba support site and downloaded all the drivers for xp and install.

    Despite the installation of the wireless driver there is still no present in the wireless network card device driver. It is an "unknown" device listed, which I think is the wireless card.

    at first I was not sure what card appeared so systematically installed that all options of wlan of the toshiba download page [intel/atheros/realtek], none has worked. little more digging autour and discovery was a then reinstalled atheros atheros wlan client on the toshiba site. still did not work. found a update atheros ar5007 driver installed, still no joy.

    forward wireless switch is on [the orange light] and has been throughout the process. have you tried enabling / disabling fn + F8, which doesn't do anything.

    I think I read somewhere (having read much too many post on this over the last few days!) that update the BIOS to version 2.4 can solve the problem. However the version offered for my model by the toshiba page BIOS update is 2.1 (which I've updated when you install all drivers in xp) and I'm not that eager to update the BIOS to a version that is not supported by toshiba, because I have no idea how fix an incorrect BIOS prevents starting the computer.

    When you look at the BIOS option "wake we wireless" is grayed out and not selectable. There is no other network without wire/related parameters. This might infer that the BIOS does not recognize the card wireless for some reason any. whereas he should have before, I started to lose its time, as worked it fine under vista wireless. so I think that upgrading the BIOS might have broken, although I can't be sure that I've updated the BIOS until I realize that the without wire did not work under XP, so it could have been broken before the BIOS update. Does this sound plausible? also, I have no idea how if is take to solve this - you can downgrade the BIOS?

    any help greatly appreciated - have been pulling on my hair for 2 days now and there is only so much googling, you can do before find yourself you constantly re - visiting the same sites over and over again!

    Thank you

    ~ andy

    worried that he may have been conflict for different drivers wlan I had initially installed, so have done a complete re - format and re-installation of xp. Install the drivers, including the wlan driver atheros. but still no adapter wlan in Device Manager.

    the unknown device in the other section of the Device Manager is listed as an ethernet controller; However glancing upward from the PCI/VEN # (C & DEV_001C 168) on the basis of data from the provider PCI identifies that this is indeed the atheros card.

    This means that it is not a hardware/BIOS problem as I previously suspected. XP can 'see' the device, but for some reason, the driver won't work. Hmm

    someone at - it had a similar problem? is it just a matter of finding the "correct" driver

    Thank you

    ~ a

  • Satellite L755 - 16 M - Webcam doesn't work not running not Win 10

    MI webcam does not work after installing Windows 10.

    Any solution available?

    Can you please post full model name and the model number of machine to ypur?

  • HARD drive not visible - how to install Windows XP on Satellite L300-11F

    I downloaded + "The Intel Matrix Storage Management Utility for the management of your local storage space, including RAID support, including drivers you will need to provide the installation manual to make the HARD disk available to the operating system OS installer." +

    But if I understand correctly this .exe file should be run from windows already. But I again Satellite-L300-11th without any operating system and drivers-CD in the box.

    What should I do to begin installing Windows?

    Hello

    You need the Configuration utility 32-bit Intel Matrix Storage Manager disk since this page from Intel:
    http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

    You must boot from the CD of Win XP. Then, you must include the SATA driver using the F6 key. Note: you will need an external USB FDD drive to include the SATA drivers.

    If you t, to an external USB FDD drive to use nLite software to create a new XP CD and include the SATA drivers.

    See you soon

  • Satellite L650-11R - broadcom WLan 802.11n does not

    Hello!

    I had some problems with my internet and everything trying to solve this problem, somehow I uninstalled my network card and its drivers.

    After that (I reinstalled several times), unit is here, but it says in Device Manager that is activated, but when I go to the device in network settings, it says that it is diseblaed and its painted in grey (I clicked, window opens saying "enabaling"... but nothing happens after that). Also, I know that of not work beacause it does not find my home WIFI network and other devices in the House are connected to the home network. In the right corner of the screen there is red ' x'.

    Also, when I run windows repair to see what is the problem of network it says that my network card is probably bad drivers and I should change that.

    I tried a lot of drivers for broadcom 802.11n on the internet, but nothing seems to work.

    My laptop is Toshiba satellite L650-11R
    network card: broadcom 802.11n
    am on Windows 7 64 bit home edition

    Help me to find drivers or tell me how to install correctly with corect NIC drivers.

    Please help, thanks in advance!

    I solved my problem. All the drivers that I tried to install worked

    The real problem was antivirus, I uninstalled Zone Alarm security and now I have internet!

  • Unable to connect by Satellite 1410 604 to WLAN when enabled WEP in

    Hello!

    Well, all I was looking for this forum, but I was not able to find what is happening with this computer.

    News of the laptop:

    Toshiba Satellite
    Model: 1410-604
    Installed wireless network adapter:
    Toshiba Wireless LAN Mini PCI Card
    Texas Instruments PCI-1410 CardBus Controladora

    From what I could find so far (the laptop is not mine, I'm helping a friend to get solved this problem) this card supports the standard 802.11/b. This should not be a problem, because the A / P supports 802. 11b standard.

    Anyway, there is absolutely no way to get the laptop connected to the WLAN...

    Or, to be more correct: it does not connect to the WLAN when WEP encryption is enabled (WEP or WPA give the same thing: it seems to get connected, but never address IP of DHCP), but this drug is going very well, if I turn off the WEP encryption.

    The worst is that the installed drivers don't support almost any configuration. Advanced configuration supports the following:

    1. the station name
    2 channel
    3 speed transmission
    4. power management card

    In addition, the card doesn't have any network manager (as others have, where it is possible to adjust some settings and ensure that WEP is used properly).

    I don't know what is happening here. I wasn't able to get the card working in Windows XP and or in LINUX (knoppix, ubuntu and xubuntu I tried).

    I'm starting to think that this has to do with the card and it is the inability to work under encriptación WEP or WAP (it works OK in open WLANs), and I do not see how to solve this problem.

    It seems that there are no newer drivers than what I (downloaded at Toshiba),
    I don't know if an update of the BIOS, will probably not solve.

    The card is maybe just too old... but if I'm not wrong... It should work. Shouldn't it?

    All ideas are absolutely our guests!

    Best regards

    Fenix_D

    Hello

    It seems that this map was made by Agere (it comes to WLan driver appearing on the Toshiba page).
    The INF file provides a few details and the driver appear to come from v7.42.0.300 19/12/2001

    However, the encryption WEP or WAP is features material and if the equipment (WLan card) does not support this then an update of the driver would not help you!

    But what you might check is the option in the Device Manager-> card Wlan-> properties-> Advanced tab
    Usually, there is all necessary settings and if the encryption would be supported then you should find it there.

    If this doesn't help then I advise you to buy a USB WLan stick who favour more recent ciphers

  • Satellite L755 - 13 X based virtualization?

    Hello

    I want to know if Satellite L755-13 X supports virtualization?

    Are there measures to enable it in the bios or something?

    Thank you

    This forum contains numerous threads on virtualization...

    This feature depends on the CPU.
    As I'm not mistaken your Satellite L755 - 13 X supports the processor Intel Core i3 - 380 M... is this correct?

    According to the Intel processor Intel Core i3 - 380 M http://ark.intel.com/products/50178 support VT - x (Intel Virtualization Technology) but does not support the d - VT (Intel Virtualization Technology for Directed i/o)

  • Satellite L755 - WLan turn on automatically

    Hi everyone;

    I just bought new laptop Toshiba Satellite L755 with Windows 7 home premium,
    Is what I am facing strange issue when I turned off the wireless FN + F8 and when I shut down the computer and turn it on after a few minutes automatically wireless switch and the red light indicating that make the question or it of normal?

    To find out, I got the laptop trying to see if that solves this problem.

    Hello

    WiFi on / off is controlled by software.
    As far as I know, the buttons FN control the Flash Card Utility, which is part of the package added value PPV (in most cases). So my first idea would be clocked a VAP.

    In addition the Wlan driver update. This is the portal Toshiba WLan containing all available wireless drivers:

    http://APS2.toshiba-tro.de/WLAN/

Maybe you are looking for