Re: Satellite L770 - unable to connect to the WiFi N project

I can connect when I set my router "mixed b/g/n" but only 54 Mbps but if I change the router 'one n' while I can find the network but cannot connect. My most old laptop, Satellite L500D can connect mode "n" without any problem. These are the only devices connected wirelessly and the problem persists if old pc is turned off. In the interface of the routers, I see my connection has / g, older Satellite mode shows n mode as it should.

Drivers are updated, router D - link DIR - 615 with the latest firmware.

Hi JP75,.

What exactly happens if you try to connect to the router N project? You get an error message or what happens?

It is not easy to say why the works of N doesn't correctly project but first of all, I would try a driver WLAN official Portal of Toshiba:
http://APS2.toshiba-tro.de/WLAN/

Is it in eco mode / normal too?

Tags: Toshiba

Similar Questions

  • problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

    Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

    On the Pro iPad, tap settings > general > reset > reset network settings

    You will need to re enter your Wi - Fi password.

    Then try to connect to your Wi - Fi network.

    If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

  • Satellite L650 - unable to connect to the public network (has no valid IP address)

    Hello

    Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

    I have visited many forums and did everything, but of no use.

    1. people with disabilities the tcp/ip V6 of the registry.
    2. the DHCP is enabled. With the help of the automatic IP (DHCP)
    3. also tried with a static IP configuration.
    4. uninstalled the antivirus provided with laptop computer (Norton).
    5 disabled the windows firewall.
    6. restored to factory settings.

    I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

    Can someone please give some other suggestions for this problem?

    Hey,.

    Can you connect to your home WIFI router correctly?

    If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

    What you can try is updated WLAN driver from Toshiba's official website:
    http://APS2.toshiba-tro.de/WLAN/

    If it doesn't work, ask the person contact I mentioned.

  • Unable to connect to the wifi service in my house, how can this be repaired?

    I have a dell laptop and I am trying to understand how to do this.  I enter the key of the service network and the message says that the network password must be 40-140-bit according to your network. It can be entered as ascii characters 13-5 or 10-26 hexadecimal characters? How can this be repaired?

    Hi Vickiloo06,

    ·         Did you do changes on the computer before the show?

    ·         What happens exactly when you try to connect to the wifi service, you receive error message?

    I suggest you to consult the following Microsoft Knowledge Base article and check if it works.

     

    Unable to connect to an access point wireless with Wi - Fi Protected Access update installed

    http://support.Microsoft.com/kb/821442

     

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

    http://support.Microsoft.com/kb/870702

    I hope this helps.

  • Spectrum X 360: Unable to connect to the wifi Café

    I can not connect to the wifi of my favorite coffee more. I received my laptop of spectrum x 360 a month ago and was able to connect to the wifi of my coffee for a few weeks without problem. Then a couple of weeks it stopped connecting. It says it is connected, but warns that it has limited connectivity. He also said that she was taking an unusually long time to connect. In all cases, it doesn't have a connection to work, because my browser cannot display web pages. I tried to disconnect/reconnect, turning off wifi / it, reboot/power, but nothing seem to help.

    Additional information: I have no problem to connect to my home network using the spectrum of x 360. Also, when I first encountered the problem, I googled and saw that a lot of other spectrum x 360 owner were running into the same problem. So, I installed the latest update of the BIOS and also downloaded/installed a network updated driver. But none of them seem to help. I brought my laptop Mac Pro in the same Café since then, and it connects even before I have the laptop completely open, so it doesn't seem to be a problem with the wifi of the café-restaurant.

    I got the spectrum x 360 more precisely so that I can do work at the coffee shop, it is a huge problem for me. Help, please...

    Hi dmorrill,

    169.250.107.106 is an automatic private IP address windows will use if it fails to get an IP address from the DHCP server.

    -Have you tried to clear your browser cache to see if that's why you can access the page of the router authentication?

    How to clear the Cache

    -Also, check if your Windows Internet setting has a configured proxy address.  If you have a single set, note and empty.

    How to locate the proxy settings

    If still no joy, then could you please find the make/model of router in the coffee shop, and also, what wireless driver version the scepter is running?  Sometimes it can be as simple as the firmware on the router wireless being old and has problems with new wireless solutions.

    It seems that the Macbook Pro has a 802. 11 a/b/g Wireless NIC, while the Sceptre has either an 802.11 a/b/g/n or it may also include 802.11ac support.  This is not necessarily a problem, but you try to access the advanced settings of the wireless driver and try to define 802.11n Mode "off" and see what happens.

  • Unable to connect to the WIFI network.

    Original title: Need computer help laptop to connect to the WiFi at home

    I have FIOS at home, but my new laptop is impossible to connect to the WIFI in my house, the diagnostic computer wasn't able to fix the problem, what can I do?

    Hello

    1. what exactly happens when you try to connect to the WIFI network?
    2. do you receive any error messages?

    Method 1:
    I suggest you try the procedure described in the article and see if it helps.

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:
    If the problem persists, you try the procedure described in the article and check out them.
    How to troubleshoot wireless network connections in Windows XP Service Pack 2
    http://support.Microsoft.com/kb/870702

    Alternatively, you can check the link for more information:

    Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
    http://support.Microsoft.com/kb/871122

    Method 3:

    If the problem persists, you can temporarily disable the antivirus software and check.

    (a) click Startand then click run.

    (b) copy and Paste the following text in the box run command and then press enter:

    wscui.cpl

    (c) in the Windows Security window, click Virus Protection.

    (d) if the software is activated, display information about the antivirus program and note the name of the application.

    (e) click Start, click programs principally made and then look for and run the anti-virus program.

    (f) temporarily disable the software.

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    I hope this information helps!

  • Satellite L670 - unable to connect to the Bluetooth

    Hello

    I am trying to connect to the bluetooth on my Satellite L670. The driver is downloaded but it not to finalize the installation. He's always asking to connect to the laptop computer, a bluetooth device.
    This laptop have bluetooth? If this isn't the case, I can use a USB bluetooth (all?) to connect a bluetooth device.

    Thank you for your support

    Hello

    > This laptop have bluetooth?
    What model of L670 you have exactly?

    You can check the specifications of the laptop on the official page of Toshiba.

  • Satellite A60: Unable to connect to the internet via a modem - no dial-up

    In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

    Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
    The driver is asyncmac.sys = MS Access Remote network serial driver.

    I have:
    -tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
    -modem uninstalled / reinstalled
    -update of Windows XP through windows update
    -update of the bios / modem / network drivers from Toshiba

    No luck, the RAS asynchronous card error is still there.

    Any suggestion?
    Thank you
    Alessio - Italy

    I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
    The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
    On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
    http://forums.practicallynetworked.com/showthread.php?t=6781
    I followed the instructions and run RArepair.exe.
    It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).

  • Satellite A500 - unable to connect to the WLan

    I'd like someone to help me.

    Have recently bought a satellite A500.
    I'm new in the world of laptops so I'm wrong.
    I connected to a router via a modem, the two netgear, the news.

    Had the two config for my network. Works well as long as ethernet is connected to the router of computer.

    My wireless icon on the front of the laptop is orange.
    If this should be green as the router?

    Pressing FN f8 it tell me wireless is connected.
    When I remove the ethernet cable it tell me to fix the problem, I need to plug in the ethernet cable.
    But I want to go wireless, I'm sure I'm missing something.

    Rang netgear but after that my router and it is not connected to wireless technology they could help me more.
    I use windows7.

    Thanks to anyone who can help me.

    > My wireless icon on the front of the laptop is orange.
    > Should it be green as the router?

    The WLan led can only be ON or OFF. If the light comes on (any color) then it means that the Wlan switch is on!

    It seems that the WiFi is enabled. In this case, you will need to properly configure the WiFi network.
    You can use the own WLan settings in Windows or a Wlan configuration tool like Intel ProSet utility.

    First need choose the right SSID (wireless network name), right of encryption (WEP, WPA, etc.) and password encryption.
    Please note that all of these parameters should be the same on the router WLan and WLan configuration software!

    Please check if the firewall does not affect the connection to the internet as well!

    PS: make sure you use the latest version of the WLan driver
    Here you can find the drivers:
    http://APS2.toshiba-tro.de/WLAN/

    In addition, search and read comments here on the forum!

  • Satellite L300 - unable to connect to the wireless network

    I have a NETGEAR router and a Toshiba Satellite L300 laptop HP DV2000.

    The HP can connect to my wireless network and also my neighbors network next door (which is not secure)
    However, the L300 can only connect to the network of my nextdoor neighbour even if it can 'see' the NETGEAR network.

    I changed the security from WPA to WEP up to now no security at all, and it seems not to matter.
    The strange thing is that my L300 CAN connect to a wireless network, but not mine!

    And my wireless network works as I can connect from my HP laptop.
    On the L300 it shows 5 bars on the NETGEAR is not a problem of weak signal.

    Any help would be appreciated.

    Try changing the WLAN settings on your router. Compare the WLAN settings on the settings of your laptop and the router.

    Test it with standard B on both devices.
    I mean if your laptop can see neighbours WLAN card wireless network in the laptop must be OK.
    I really thing all is due to wrong WLAN settings.

    Play around with that sort of thing.

  • Satellite L20: Unable to connect to the internet using mobilephone & dongle BT Mecer

    Hi all

    Mine is an edition of Satellite L20.
    I recently installed XP Professional Service Pack 3. I connect to internet using my USB cable with my Sony Ericsson C702 (use the phone as a modem).

    Since there is no bluetooth built into my laptop.
    So, I bought a Mecer bluetooth dongle. I installed the bluetooth software. Can I transfer data between my laptop and my mobile phone via bluetooth.

    Now the problem is I can not connect to the internet via bluetooth. I opened my bluetooth IVT software and paired my laptop and mobile computer. Then I opened my Sony ericsson suit and looked for my mobile finds, my mobile and still once he pairs with my cell phone and when he tries to connect with my mobile phone its shows "device cannot be detected, try again." I tried to reconnect, not matching and pairing it several times, but no use.

    I also found one thing, just after it displays "Device cannot be detected," a pop-up message "SEPCSuite.exe has encountered a problem and closes the window with options."
    1) send to microsoft
    Including 2) send.

    What can we do to fix this problem?

    No idea...?

    See the website of your provider of Bluetooth software to help. This forum is for Toshiba Software only.

  • Satellite L - unable to connect to the internet

    My laptop for some reason any does not connect to the internet!
    When I run diagnostics it says that there is something to do with the Windows Firewall, but when I have my remarks with the firewall that it used to always let go me on the Internet even if a connection is present.
    Restore factory will help?

    I also have the restore CD/DVD thing, but I'm a bit confused as the product key on the bottom of the laptop is different than at the back of the CD case.
    At first I thought that it would be grandpas CD/DVD as it also has a Toshiba Satellite but when I compared its product key on the CD/DVD was different.
    Is how important it?
    If this is not the case, when restoring to factory settings what product key can I use the CD/DVD or on the bottom of my laptop?

    Please help I need 2 fix this problem quickly, as soon as possible!

    Hello

    If you want to install the operating system and to have the factory settings, again, you must not enter the activation key. It is already enabled for your laptop model and you can use it so often desired. Please don't be confused on this issue. Everything is OK with him.

    What about your Internet connection?
    As you wrote: for some reason any does not connect to the internet!
    If you do not know the reason how should we know it. ;)

    If the network adapter is properly installed, I guess some false parameters are responsible for this.

  • Satellite L510 - unable to connect to the mobile phone

    Hi, I have a question and hope to get a solution for everyone! I use Satellite L510 run with Windows vista but the problem is that I can't connect my bluetooth with nokia 5230!

    It can connect to the nokia 7610 and 7610 connect to 5230 also no problem. So I'm just wondering why the laptop can not pair with my 5230! Thank you!

    What error message do you have? What is the last message on the side of the phone before the error occurred?

  • Satellite P750: Unable to connect to the other PC with WLAN

    Satellite P750 was working fine until yesterday.

    Today, when you use the Atheros AR9002WB-1NG wireless adapter I can't connect to the other pc on the network.
    However, I can connect to the internet ok.
    Other pc can not see me either.

    * When I use wired everything is ok *.
    I tried to stop the antivirus and firewall, but it made no difference. I reinstalled the drivers and etc. shares checked file.

    Can anyone help please?

    Hello

    You should enable the option called Ad-hoc to peer option in your WLan settings!
    Go to network connections
    Select connections-> properties-wireless
    Add the new network
    Here you must configure this (insert SSID, encryption, and password), and don t forget to check this is a computer-to-computer (ad hoc) network

  • Satellite L500D - unable to connect to the hotspot free

    I have Satellite L500D and when I connect to the freedom of a hotspot Wi - Fi with no pc security says connected without an internet connection. As PC is brand new, I have ran troubleshoot-made said something on the cards to reset but no result. PC poster networks, connects but won't give internet.
    I see girls download via vUtiliser, but do not download.

    Please help I won't feel stupid if I missed something stupid.

    Hey Buddy,

    Can connect you to your WIFI router at home?

    Usually for these free hotspots you need a key of the owner to access the Internet or the MAC address must be allowed.
    In addition, the correct TCP/IP settings should be used as well.

    I put t know how this works exactly, but if you have problems, you should ask the owner of this hotspot WIFI free. Generally, they can give you more details about this.

Maybe you are looking for