Re: Satellite m30 - 404 only standard installed driver windows

Similar Questions

• Satellite M30 sees only 120 GB installed WD 250 GB HARD drive?

  Recently my native HDD (on M30) crashed and I upgaded with Western Digital WD2500BEVE 250 GB. Disc.
  But when I boot the sytem, it appears that only 120 GB is available!

  Is it possible to use the laptop the full capacity of the HARD drive? Whow?

  Thank you!

  Hello

  The fact is that not all HARD drive sizes are supported due to the limitation of HARD BIOS disk size.
  Easy said: BIOS don't support all hard drives.

  I've read many threads here in the forum about HARD drive sizes possible max and it seems that a 120 GB of HARD drive is wide that could be used in the Satellite M30.

  You ask now for an update of the BIOS. Am I wrong?

  Well, unfortunately, the update of the BIOS will not improve the situation and will not use the s larger HARD drive as 120 GB :(

  Best regards

• Upgrade WLAN to 56 or 108 with Satellite M30 404

  My M30-404 has a built-in with 11 mbit Wlan card and without WPA, WEP just is possible. This is the reason why I want upgrad. Is is possible to use a card like this: 'Sparklan WMIA - 123AG Mini PCI card with chip Atheros' or this card won't have problem?

  A card with 56 mbit is also possible, but who is the best?

  Frank

  Hello

  Well, it is a complete description of this map:

  SparkLAN WMIA-123AG - 802.11a/b/g WLAN Mini PCI Atheros (AR5004X)

  I m not 100% sure, but I think you can use this card because it supports 802.11a/b/g standard. But to be on the safe side, you can ask the partner to Toshiba service for detailed information.

  Best regards

• Satellite M30 is not unbootable HARD drive and I can find no error

  When I start the laptop, I get only a black screen (after the Toshiba/Bios screen) and a flashing cursor. Nothing else happens. I didn't like the change of configuration, updates etc. before that happened.
  I am able to start the computer from the CD (with a XP pro CD or UBCD4win) drive and access the hard drive (so I was able to copy all of my data to an external hard drive), it does not start only windows (XP Professional SP3) from this drive!

  Using UBCD4win, I ran diagnosis tools like memtest and TestDisk, without any reported errors. I also ran DFT (drive fitness test) of Hitachi (which is my hard drive manufacturer). Have not found errors, too. I also tried the repair install of windows, which went very well, but has not changed the situation at all. Also, I tried fixboot, fixmbr and bootcfg/rebuild of the recovery console, does not solve the problem. Load default BIOS - no change. I'm out of ideas...

  So does anyone have an idea what's wrong with the system? I find no error, but this thing just does not start from the hard drive. Any idea/input is very appreciated!

  Hey Buddy

  > there must be a way to solve the problem without having to reinstall the entire system.
  I doubt that!
  Not all problems can be solved without having to reinstall Windows.

  I know this is strange and it takes a lot of time to install all your programs, but I think that in this case, it is the only solution for this. I mean you have tried many things and if a Windows repair installation does not, for me are obvious: a relocation complete!

  You can spend more time to solve this problem without having to reinstall Windows, but don t forget you can do a complete new installation at the same time.
  Think about it! ;)

  Good luck!

• Satellite M30-107: the DVD Supermulti drive burn DVDs?

  I have a Satellite M30-107 P - M 745 / XP HE / 512 MB / 80 GB / 15.4WTFT / DVD SuperMulti / WiFi.

  His CD/DVD player is described as: DVD Supermulti drive compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD - RW, DVD + R, DVD + RW, DVD-RAM
  Maximum speed: reading: CD-ROM 24 x, 24 x CD - R, 12 x CD - RW, 8 x DVD-ROM, 4 x DVD-R, 4 x DVD - RW, 4 x DVD + R, 4 x DVD + RW, 2 x DVD-RAM / writing: 16 x CD - R, 4 x CD - RW, 8 x HS CD - RW, 4 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, 2 x DVD-RAM

  Can I use this disc in WRITING ("burn") the DVD and if I can, I need any special software and what type of disc can I use.

  I would use it to back up the laptop.

  Thank you.

  Hello

  Why you ask? You have published the specifications of player and according to these specifications of hardware of the player are able to write on 16 x CD - R, 4 x CD - RW, 8 x CD - RW HS 4 x DVD-R, 2 x DVD-RW, DVD + R 2.4 x 2.4 x DVD + RW, 2 x DVD-RAM.

  For me it s case. You can write data and files on the DVD s
  I use "Nero burning ROM" software to burn it to CD or DVD. In my opinion it's the best program and very easy to use.

• Satellite M30-404 BIOS update problem

  Hi ppl
  I have problem with the bios update, my laptop is 1.30 bios ver and ill try updated to 1.60 worm. on windows update becauseI gift? t have traditional update disk. But do not work 4 me. Help, please? Im trying to update to 1.20 ver., reading in the manual of the BIOS, but nothing hapend.
  SRY for bad English :) ppl

  Howdi wiz4rd,

  I also have a satellite M30, and a few weeks ago I had updated my laptop to the BIOS v1.6 latest. I had no problem with the update.

  Where did you downloaded your BIOS? and what Productcode your machine? (PSM30E or other)

  CyA bob77

• Satellite A300 - 10 M: how install driver WLAN

  I downloaded the Atheros WLAN driver but do not know what are the files to be opened to load the driver on the laptop.

  Any help, please?

  Thank you

  Hello

  I guess you ini files and the dll in the folder of the Wlan driver
  In your case, I would go to the Device Manager. Here, you must mark the card Wlan (unknown device or Ethernet card in the network controllers) and must use the option install driver. Use the advanced procedure, and then point to the folder of the Wlan driver that you downloaded on the page.

  Welcome them

• Satellite A135 - new installation of HARD drive "windows cannot be configured.

  I have a portable Satellite A135-S4467 with a hard drive failed (WD 160 GB).
  I bought a new hard drive (WD 320 GB).
  When I try to install windows vista (32 bit) on the new hard drive by using the original factory software installation CD toshiba, I get the following error message:
  "windows cannot be configured to run on this computer hardware.

  After reboot, Windows will start normally or in safe mode.
  I updated the BIOS to version 1.9.
  I tried also to install the updated RAID/AHCI drivers of intel to the windows installation, as recommended by the windows forums - I always get the same error message, even after several attempts to completely reinstall windows.

  Several forums, I searched for recommended to change the settings of the HDD (RAID COSM) in the BIOS.
  I don't know how / if to do this. When I enter the BIOS, I see the hard drive, but I can't select it, so I couldn't try it.

  It seems that I've tried everything, without success. I took care to unplug all external/etc devices during the installation as well. I also did all the drivers are for vista 32 bit.

  Help, please!

  Have you tried to install the OS using the Microsoft installation disc?
  There may be a compatibility problem with your new HARD drive.

  Do you get a place another HARD disk capacity not more than 200GB and test it?

• Satellite M30-604 only see a capacity of 128GB HARD drive from 320 GB HARD disc

  I have a M30 604 with XP - SP2 and bios version 1.7
  I installed a new internal 2.5 "320 hard drive - but the XP Disk Manager sees only 128 GB of total capacity. There is not yet any unallocated space.
  East phoenix 48-bit LBA compatible bios?

  Akuma is right. This is a technical limitation and there is nothing you can do about it.
  With SATA HDD, it might be possible to see all HARD drive capacity, but not with PATA old drive.

• Satellite M30-S309: impossible to install the driver of modem for Win XP SP2

  Hi all
  I installed WinXP SP2 and after that, I can not install my modem driver?

  What is the problem?
  Is there a new driver for WinXP SP2

  Best regards

  Hello

  Do you have an error message or strange notification messages?
  It would be useful to know this.

  Bu the way: Please take a look at the driver Toshiba Europe page. There you should find a PDF of information update Microsoft Windows XP SP2. Some applications need to be updated after installation of SP2.

  I think it should help!

• Satellite C670D - 11K - only standard vga graphics card

  I have a new windows 7 64 bit system. But now the graphics card is no longer ATI Radeon HD6320. Only the standard vga. I downloaded the driver for my satallite, but when I started the installation program, the .exe extracted all files, but the file: "tinstallwb.exe" start installation.

  I tried manually. When I look in the. INFs installation Pack, (C7113756.inf, which is located at: packages/drivers/display/W76A_INF) no HD Radeon 6320 is listed. Only HD 6330 M or 6310 and other. At Toshiba listed display drivers wrong on the download page for this laptop?

  Please help me!

  THX

  According to specification for laptop, your laptop comes with preinstalled Win7 64 bit Edition home premium so if the graphics card is not installed correctly, I assume that you have installed the version of the OS, right?
  I just hope that you have created the drive recovery before you ve done this.

  In any case, the right display driver you can find HERE.

  Unpack the content in itself created folder and double-click setup.exe. This will start the installation of the driver.

  Test again and send feedback.

• Satellite M30 - restore the external DVD drive

  Hello
  I have a Satellite Pro M30. There is a problem with the drive DVD internal Multi - replacement will take a month or two to get here. I need to perform a restore on this machine. I connected an external DVD drive to the machine. When I start the machine starts on the restore CD but seems so looking for a Player X, I get the following messages displayed on the screen of the BACK:

  Device name: TOSCD001
  Number of units: 1

  CDR101: Not ready reading drive X
  Quit, retry, fail?

  Insert the recovery CD #1!

  What should I do?

  Kind regards
  Sameer

  Hello Sammer

  Unfortunately the recovery media is created to be used as internal drive only. I put t think you will be able to use it with an external device. On the restore CD there is a ghost image and it is not easy to fix it for use with an external device.

• Satellite M30 - problem with the graphics driver and Quicktime movies

  I just installed a 40 GB to 80 GB hard drive and installed all the drivers in the correct order, as indicated by toshiba. Everything works well except the used for Quicktime .mov files. All I get is audio but no image - other than a colorful blur screen!

  I think I've isolated the problem to the graphics driver. Whenever I turned off / uninstall the driver dedicated for the graphics card FX 5200 GP (version 4.6.44) Quicktime files work fine. It is only when I installed the dedicated driver problems occur!

  Can someone tell me why this might be?

  Hello

  Do you use the graphics driver from the Toshiba driver page?

  Try to use the QuickTime Alternative 1.77. In this version the codex QuickTime has been updated.
  This version uses these features:

  -Media Player Classic [version 6.4.9.0 + SVN build 2006-12-24]
  -Codecs QuickTime [version 7.1.3.100]
  -QuickTime plugin for Internet Explorer
  -QuickTime plugin for Opera/Mozilla/Netscape
  -Extra plugins for QuickTime
  -QuickTime DirectShow parser
  -Wrapper DirectShow QuickTime decoder
  -CoreAVC 0.0.0.4
  -CoreAAC 1.2.0.575

  check it out...

• Satellite L350-277 - can I install driver touchpad of another model?

  I just changed from a Satellite M70 and the touchpad performance is far superior. Is it possible to install the driver for the touchpad on the L350 M70? Anyone see any problem?

  The Satellite L350 pilot leaves the pointer jumps all over the screen. Before say you 'change settings' - I - for about an hour.
  The Satellite M70 driver has much more stability and more features - like every corner can have a function - copy / paste for example.

  Every technophobe in the Toshiba got ideas, before I screw to the top of the main interface on my new L350.

  Hello

  I can t imagine that jumping is caused due to the driver. Make sure that you do not touch the touchpad if you type something. Alternative, you can disable the touchpad due in writing if you press FN + F9.
  Check this box!

  And before you install a driver from another laptop you need to test the latest driver for your laptop. Please first check from Toshiba Web site for an update of the L350 driver:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  By the way: what OS is installed at present? Do you use a preinstalled OS from Toshiba?

• Cannot install driver Windows XP Home edition for WLAN card on my Satellite A200 - 14 d

  I have a problem with the driver for win xp wireless
  I installed win xp and the only problem is the wireless lan driver
  Help me please

  Hello

  Please visit http://aps2.toshiba-tro.de/wlan/ and you can find all the drivers of real WLAN card.

  Good bye