Re: Satellite P - CD/DVD drive has been disabled after installing itunes 8

Similar Questions

• CDDVD drive has been disabled by mistake how can this be corrected?

  CDDVD drive has been disabled by mistake, how do I fix the problem?

  CDDVD drive has been disabled by mistake, how do I fix the problem?

  ===================================
  Might be interesting to try to do a system restore to
  an hour before the drive has been disabled.

  See the following article:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  And... the following link might be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

• My CD/DVD drive no longer works after installing an update for Roxio Burn, (it was working perfectly until after the update).

  Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G

  Hello

  Code 39 means that the driver is corrupted or missing.

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
  Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
  These however is a possibility depending on which and how many you have installed.

  Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
  allows the reader to work (not re - install until the issue is resolved).

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite P300-220 - Radeon driver has been restarted on Windows 7

  Since installing Windows 7, I have several times a day, the screen freezes with a totally random display, who has Windows sends a message "the radeon driver has been restarted", I have the latest driver dated (8.634) on P300-220

  What can I do?

  Thank you

  Hello

  Can you please tell us which version of Windows 7 you have (32-bit or 64-bit)?
  Have you also installed the utility Intel chipset for laptop? You have more yellow exclamation in Device Manager?

  To be honest I n not know why this happens, but you should check the Windows Event Viewer. You can see all the events and on the problem of display driver, you should find an error with more information s. check this box!
  Normally the event viewer shows why this is happening in the description.

• A driver for my CD drive has been disabled. How to identify the driver and solve the problem?

  Lately, I have not been able to use my CD-ROM drive. When I put a disc in, the player starts to turn, but Windows does not recognize the disc. When I navigate to the CD-ROM drive in the Explorer, a message appears telling me "Please insert a disk into drive D:." When I look at the properties of the device, I get the following device status:

  A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32)

  Click Troubleshoot to start the troubleshooter for this device.

  Trouble shooting steps me to uninstall and reinstall the device, but this has no effect - the drive still does not work.

  I am running Windows XP Professional. My CD drive is a LG CRD - 8482B CD-ROM. The driver files are:

  CDROM.sys
  GEARAspiWDM.sys
  IMAPI.sys
  PxHelp20.sys
  Redbook.sys
  c:\windows\system32\storprop.dll

  Does anyone have a solution?

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• The cd/dvd driver has been damaged by a virus and then deleted. where can I find a new driver? Help!

  I have a Toshiba laptop with Windows XP

  I tried uninstalling the drive and reboot my computer it did not help.

  Without a new driver, my computer does not recognize the cd/dvd drive

  Please click on the link below and follow the steps outlined on the page, this will solve the problem:

  http://support.Microsoft.com/kb/314060

  MD MOEEN AJAZ KHAN - MCP, N +, A +.

• Re: Satellite L650-11F, DVD drive disappeared Windows 7 after that BIOS installed

  Hello

  I would like to ask for help about this problem:

  Today one of the programs from TOSHIBA, that came with my laptop (L650-11F), warned me about an update of the BIOS (v1.80) after download and install my DVD drive disappeared from Win7 and it has a continuous yellow light on it. It does not even open when I press the eject button.

  I have however maybe install the old version 1.60 back would help, but TOSHIBA does not keep older drivers version apparently.

  Any help would be greatly appreciated.

  Hello!

  Restart your computer. During the startup, at the beginning, press the F2 key to enter the BIOS Setup. In the configuration, press F10 to restore all the default BIOS settings. Save the changes and exit.

  Post here if your problem solved.

  Kind regards.

• Peripheral USB MTP are impossible to install. Error: «device driver has been not correctly installed...» Code 31 ".

  I tried almost every answer nothing is done online.

  Both my Canon T1i and my Nexus 7 Tablet does not connect to my office. Raise them the same error message: device driver has not been installed with success, usually with the error "code 31". My laptop has no problem to connect to two devices, and both are on Windows 7. All USB devices non - MTP, as devices and thin USB drives work.
  I tried to uninstall/reinstall device drivers, as well as my host USB in Device Manager. I also looked in the upperfilters registry, but they aren't there. I don't know if it's important, but my Windows operating system is on a different drive than my account "User". I am very close to reinstall my computer.
   
  Original title: any = s MTP USB device failed to install

  Sorry, I'm impatient and re-formatted by the operating system. Works fine now, if it happens again, or determine the cause, that I re-post.

• my cd/dvd drive has been deleted

  my laptop is acer, laptop, aspire 4520. audio driver works. dvd/cd burner/player is missing do not know how to put it back.

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• CD is not visible in the window 'computer '. It indicates that the driver has been disabled by another driver

  restart resolves the problem, then it repeats very soon

  Hello
   
  1. when the question is is produced?
   
  Follow the steps below and check if that helps.
  Step 1:

  I would say you click on "fix it" link for automated troubleshooting and fixing the issue below. If the "fix it" does not work, follow the steps manually.

  http://support.Microsoft.com/kb/929461

  Step 2:

  You can remove and reinstall the existing drivers. To do this, follow these steps:
   
  a. Click Start and then click Control Panel.
  b. click System and security, click System and then click on Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
   
  (c) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  d. When you are prompted to confirm that you want to remove the device, click OK.
  e. restart the computer.
   
  After the computer restarts, the drivers will be installed automatically.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Satellite C50D - B - 11 X - weird display problem after installing iTunes

  Hi all
  I just installed the latest version of iTunes on my Satellite C50D - B - 11 X, and now I can not see any picture of video players. reading online (youtube, etc.) or from CyberLink PowerDVD. All I get is a green screen where the video should be. The audio plays very well, but I do not see a thing. I uninstalled iTunes, but it made no difference. Any ideas?

  Thank you

  Adam

  I read in various forums that resettlement of the Quicktime would help solve this problem of green screen.

  In addition I recommend you to install the playback software VLC freeware for testing purposes.
  This player supports almost all video formats, and you should be able to read your local videos properly.

• driver installed with no hardware has been disabled

  When I start my computer, I get a window on a driver has been disabled due to a conflict between the version of windows visa, and the driver perticular. It started when I tried to run a cd with photos to scan program.  I would remove this driver so that I don't get the window when I start my computer, but can not find, can anyone help.

  Hello Williebee,

  Thank you for your message.  Please let us know the exact error you get as well as the make and model of your computer.  It may be better to just go to the Web site of the manufacturer of the computer and download/install the latest driver that is causing the problem.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• DVD drive no longer works after the installation of PowerISO

  I recently installed PowerISO and he took my physical DVD drive so I can't use it. The drive does not appear in Windows Explorer. The drive appears in the parameters of the material, but with the note that the driver has been disabled, and another driver provides functionality. There are questions on the net on this WRT to PowerISO (wish I had seen these before that I loaded it) but no real and tangible solutions. I tried to uninstall the device, reload the drivers and even bought a new DVD player and installed it but it happens with the same question. None of em fixed work. I did a complete refresh of BIOS and CMOS, nothing helps. Readers do not appear in the BIOS settings but show (with numbers) to the setting of the material. I also removed PowerISO, which did nothing. Then I re-installed and changed the setting Virtual Drive 'None' in thinking that this was taking on my physical drives. Nothing. So I still once uninstalled.

  In addition, if the problem persists, can you check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  To the registry for this key, in the right window, in the world is here, under 'Name', a LowerFilters and UpperFilters value?

  If so, for UpperFilters and LowerFilters, value which is listed under "data"?

  There is most likely a bad entry in one of these values that would have made the installation or uninstallation of software.

• How to download the old version of firefox 3 as my antivirus has been disabled using the ff 4 because it is not compitable

  Hello

  I have a problem with my anti virus add on Trend Micro as it has been disabled after that I upgraded to 4 FF. He said that Trend micro NSC Firefox extension 6.5.0.1234 (disabled).

  How can I download the older version I have is urgent. Is there a link to download the old version (the version before FF4).

  Thank you
  Caroline

  1. Go to Download Firefox v3.6.17 and upload it to the office.
  2. Then go to add/remove programs, scroll down to "Mozilla Firefox" and delete it, choosing to keep your bookmarks, etc., the customizations (don't tick the box).
  3. Reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox
  4. Finally, run the installation file downloaded previously on the desktop.

  Your bookmarks, etc., customizations are stored in a different location and will become available to you even once you complete the installation.

• CD/DVD drive has disappeared (TS - 802 (a) on my Satellite A200-TJ9

  Hey guys,.

  I'm having some trouble with my Satellite A200-TJ9.
  The DVD drive has disappeared earlier, done case disassemble the filter and it worked for awhile, but now it disappeared again.
  Tried uninstalling the drivers and reinstalling, but the drive does not appear in Device Manager, or even in the boot configuration menu.

  The reader will always spin discs and act as if it does not operate normally, but I have no way to access the disk.
  Any ideas?

  Thank you
  Garrick

  Hi garrick7,

  the drive is recognized in the bios?
  Otherwise, drive might have gone... or some may be defective electronic...

  If it is not recognized in the bios that the player could be dead. > change it.

  If she recognized correctly may be a software problem...
  Test it with a system-on-cd or try to boot from it.

  but I don't think that this problem is software partner...