Re: Satellite P100: need to backup data using Recovery CD for Vista

Similar Questions

• Satellite P100: Need 5 in 1 card reader driver for Vista 64 bit

  I am not able to operate the card reader internal of my Satellite P100 with Vista 64 bit, it seems that in the download section, it has the drivers for Vista 32-bit, with tips for using the flashcard with vista 64?

  Tom

  Hello

  Try this driver Toshiba

  [2.0.0.7 | http://195.182.196.27/TIFMv2007.zip]

  I hope this will help you

• Blue Screen on Satellite P100 - need to recover data

  Putting on my laptop yesterday, I was faced with a blue screen error message that even after running chkdisk keeps appearing, even on reboot in safe mode.

  The problem is I only have the Toshiba recovery disks (not a disc XP - XP was preinstalled on your laptop) and they say on them using the wipe recovery disk computer and I need to recover data on the hard drive before reformatting.

  I took the laptop to the local repair center and they say they have to reformat and do not make data recovery.

  Any suggestions gratefully received.

  Hello

  In my opinion, there are two solutions. Is, try to get the facilities WXP CD and see if you can fix it using the option to repair Windows XP Home edition or use supplied recovery media and do a clean install of the operating system. After doing this you will put factory once again and everything will be OK again.

• Satellite P100 - cannot delete the data from CD - RW disks

  I have a laptop Toshiba Satellite P100.

  According to the user manual it says:
  You cannot delete partially all the data written to a CD - RW

  I thought the idea of using a CD - RW so you could delete everything that you wanted to and use this part of the disc again and again.

  Can someone explain?

  I didn t find this info in the user manual and if you burned a few data on the CD - RW disks, then it should be possible to format this CD - RW by using a tool like Nero Burning ROM third 3rd for example.

  I've done several times using Nero and still managed

• Satellite P100-PSPA3A-05S00P - how to use the remote control & infrared

  Satellite P100-PSPA3A-05S00P.

  Do not know if I have deleted the drivers or need drivers for remote control and infrared.
  I'm not sure how to activate the infrared but I got this cable look like an infrared receiver, but you don't know where it's going.

  I used the remote when I bought the laptop from 1st but it was a few years ago...

  Hello

  I think that infrared doesn t need to be activated. It s must already be enabled.
  But the remote control can be used within Windows Media Center.
  I think this will work because my friend of mouse remote control with Windows Media Center as well and it worked well.

• Satellite P100 - need recovery disk

  I lost my recovery disc for Toshiba Satellite P100 - 217.
  Who can help me with a copy, I have a problem with my laptop?

  Do you know where and how can I get another copy of the recovery disk?

  Hello

  Try this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  You will also find this link if you are looking for in this forum for the same questions!
  There is a lot of discussion that could help you!

• Need to recover data in tabular form for background processing

  Hi all
  I need to extract data from a form in a table to perform database operations. This tabular presentation has no editable fields as well. I tried to use the APEX_APPLICATION application items. G_F01, APEX_APPLICATION. G_F02... The problem is that I am not able to retrieve the field references l f01, fo2... for the unchangeable fields... However, I need to retrieve these values as well as for database operations that must be performed on the update. Any help would be appreciated
  Kind regards
  Vignesh

  Add any value you want using the apex_item.hidden function. It will not be returned but will be available in the form with the corresponding editable/visible ones.

  Phil

• Satellite P100 - 400 (PSPA6E): display driver does not work with Vista 64 bit?

  Hello

  I have a P100-400 (PSPA6E) Satellite and I just got the new version of Windows Vista x64bits. I tried this version of Vista because this series of laptops in the 64-bit processors. Well, the problem was when I downloaded the drivers to display on the site and when I'am install the installer says I'm not a Windows vista OS.

  Well actually these drivers only work for Vista x32bits. And I had the same problem with the audio drivers. If Vista was running really slowly and noiselessly, perfect...

  What I am asking, that is, if you realize laptops with 64 bit, why aren't you drivers that work with 64 bit systems...

  Hello

  In fact 64-bit Toshiba drivers are not available at this time on the Toshiba page.
  I think 64-bit drivers are not available because Toshiba doesn't provide any laptops equipped with 64-bit operating system.

  But as far as I know that the new 64-bit drivers should appear both text.
  I'm also looking for these drivers because I m an owner of the 64-bit version of Vista.

  It seems that we have to wait but I m sure that the drivers will be available.

  concerning

• Satellite P100: Conexant audio only is not supported on Windows Vista 64-bit

  Last week, I install new Windows Vista 64-bit system, but not sound. I think it was the problem with the audio driver 64-bit. Is that someone has the new driver for vista 64-bit?

  It seems that some devices are not recognized by Vista common drivers that were shipped with the Vista operating system and therefore the new drivers are needed. But because Vista is not official on the market (official start is late January 2007) drivers are not published.

  But where did you get the version of Vista 64-bit?

• Backup and HP Recovery Manager for Windows 7

  I installed all the software and drivers that came with the HP upgrade DVD. But, I found that the Backup and Recovery Manager missing on DVD. Is there a Backup and Recovery Manager for Win 7? I liked the manager backup and restore that was available on my Vista, when I bought this laptop, but is currently unavailable due to upgrade! All the solutions for this? I don't want to use the default Windows Backup that I don't have a separate HARD disk for the time to store the backup here and do not want to fill up my hard drive with data backup! Thank you.

  Ok thank you. I have my recovery partition intact Vista. So I think, I should be able to recover if I have some kind of problem! I was able to find a backup and recover in Win 7 itself. Maybe I should wait for the software will be released by HP. Thank you once again!

• Recovery software data and the partition for Vista?

  I have a HP desktop computer that started having problems starting. Startup Repair couldn't fix, but showed "no OS installed. I guess it's a corrupted MBR/MBT problem.

  In any case, I made the fatal mistake assuming that Vista has the same functionality of XP restore/recovery and would simply repair the file system not complete format/reinstall. Within two seconds, I realized that it was reformatting the drive and disconnected from the computer (because you can't give up a recovery).

  Now, of course, the player starts not at all and displays "No MBR".  I removed the disk and put it in an external USB box to see the content. It only shows a new Windows and a few other folders with one or two files system in them.

  Anyway, I know that all the old data has been not overwritten in 2 seconds, if it is still there. Not to mention, HP no longer ships of installation disks of Windows and preload in place of the images in a separate partition. I need to recover this option to re - install Vista, in the worst case scenario.

  So, I need/file recovery at least get software partition all my data. There are a hundred apps out there, and it is difficult to tell which are the best (they are quite expensive). I can't find any reputable sites that do an actual test on the Soft full - for example, C/Net only tests the features of the limited demo version.

  At the very least, I would like to recover my lost data on an external drive, then recover if possible, the installation of Vista partition and do a clean install on the disk.

  Are there apps free open source reliable and easy to use? So far, I am considering

  EASEUS Data Recovery Wizard Smart Partition Recovery

  Try this info below.

  You may need to contact the data recovery for it experts.

  Be warned: they are very $$$.

  Data recovery:

  Use Knoppix Live CD to try to recover your data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Need to backup data before restoring my computer with the dell factory restore?

  I experienced some problems with windows so I thought to use the system to dell factory restore.
  I have actually three drives 1 is for the n other operating system is for my personal data n the last of them is the recovery partition. And now if I want to restore what should I back up my data on the drive that is not involved with the operating system?
  Would there be any deletion of my D drive (not used in the operating system)?
  Should I have to backup the personal drive (drive D)?
  Or should I just format my C drive (with operating system) and data must be assigned on drive D (personal car)?

  You should always back up data.

  Dell, ask questions about their recovery process.
  Their recovery process will be how you bought, with two only the main road and the recovery partition; but not your data partition

  Read the info here on how to use the Dell recovery options:

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• Needing a maximum date using the group value of

  Create table student (dept number(10), dep_name varchar2(10),join_date date,years_attended number(10),end_date date);
   
  insert into student values (1,'I',to_date('3/7/1917','MM/DD/YYYY'),4,to_date('8/26/1987','MM/DD/YYYY'));
  insert into student values (1,'I',to_date('1/1/1900','MM/DD/YYYY'),4,to_date('8/26/1932','MM/DD/YYYY'));
  insert into student values (1,'D',to_date('1/1/1920','MM/DD/YYYY'),5,to_date('8/26/1994','MM/DD/YYYY'));
  insert into student values (1,'C',to_date('1/1/1920','MM/DD/YYYY'),6,to_date('8/26/1945','MM/DD/YYYY'));
  insert into student values (2,'I',to_date('7/1/1900','MM/DD/YYYY'),3,to_date('8/26/1932','MM/DD/YYYY'));
  insert into student values (2,'I',to_date('8/16/1916','MM/DD/YYYY'),9,to_date('8/26/1923','MM/DD/YYYY'));
  insert into student values (2,'D',to_date('8/16/1916','MM/DD/YYYY'),10,to_date('8/26/1987','MM/DD/YYYY'));
  insert into student values (3,'I',to_date('3/7/1917','MM/DD/YYYY'),4,to_date('8/26/1987','MM/DD/YYYY'));
  insert into student values (3,'D',to_date('7/28/1920','MM/DD/YYYY'),6,to_date('8/26/1945','MM/DD/YYYY'));
  insert into student values (3,'I',to_date('7/28/1920','MM/DD/YYYY'),8,to_date('8/26/1965','MM/DD/YYYY'));
  insert into student values (4,'I',to_date('12/31/1924','MM/DD/YYYY'),2,to_date('8/26/1998','MM/DD/YYYY'));
  insert into student values (4,'I',to_date('6/10/1929','MM/DD/YYYY'),1,to_date('8/26/1943','MM/DD/YYYY'));
  insert into student values (4,'C',to_date('1/17/1927','MM/DD/YYYY'),4,to_date('8/26/1955','MM/DD/YYYY'));
  insert into student values (4,'C',to_date('6/10/1929','MM/DD/YYYY'),30,to_date('8/26/1967','MM/DD/YYYY'));
  insert into student values (5,'D',to_date('2/10/1931','MM/DD/YYYY'),2,to_date('8/26/1943','MM/DD/YYYY'));
  insert into student values (5,'I',to_date('2/10/1931','MM/DD/YYYY'),24,to_date('8/26/1962','MM/DD/YYYY'));
  commit;

  I need a join_date of date value maximum for each Department. If max (join_date) has two records for each dept max (end_date) are to be considered. I used a select query

  select * from student where join_date in (select 
  max(join_date) from student group by dept);

  gives me the following result

  1     D     1/1/1920     5     8/26/1994
  1     C     1/1/1920     6     8/26/1945
  2     I     8/16/1916     9     8/26/1923
  2     D     8/16/1916     10     8/26/1987
  3     D     7/28/1920     6     8/26/1945
  3     I     7/28/1920     8     8/26/1965
  4     I     6/10/1929     1     8/26/1943
  4     C     6/10/1929     30     8/26/1967
  5     D     2/10/1931     2     8/26/1943
  5     I     2/10/1931     24     8/26/1962

  But I'm looking for the result that gives me only a maximum value for each column dept. First of all, it should look like to a maximum value of join_date, so two records even join_date max (end_date) are to be considered. The result should be sumthing like this

  1     D     1/1/1920     5     8/26/1994
  2     D     8/16/1916     10     8/26/1987
  3     I     7/28/1920     8     8/26/1965
  4     C     6/10/1929     30     8/26/1967
  5     I     2/10/1931     24     8/26/1962

  Can you please tell me how to rewrite the select query for results above.
  
  Published by: user11872870 on August 2, 2011 17:29
  
  Published by: user11872870 on August 2, 2011 17:36

  Hello

  This is called a Query Top - N , and this is a way to do it:

  WITH     got_r_num     AS
  (
       SELECT     student.*
       ,     ROW_NUMBER () OVER ( PARTITION BY  dept
                                 ORDER BY          join_date     DESC
                           ,                end_date     DESC
                         )      AS r_num
       FROM    student
  )
  SELECT       dept, dep_name, join_date, years_attended, end_date
  FROM       got_r_num
  WHERE       r_num     = 1
  ORDER BY  dept
  ;
  

  Another way is similar to what you posted:

  SELECT    *
  FROM       student
  WHERE        (dept, join_date, end_date)
                 IN (
                      SELECT    dept
                 ,       MAX (join_date)
                 ,       MAX (end_date) KEEP (DENSE_RANK LAST ORDER BY join_date)
                 FROM      student
                 GROUP BY     dept
                 );
  

  I suspect that the first way (using ROW_NUMBER) will be faster.
  In addition, the ROW_NUMBER approach is guaranteed to return only 1 line by Department using the approach of GROUP BY, if there is a link on join_date and end_date then it will return all the contenders in this Department. using ROW_NUMBER, it is easy to add expressions to tie-break as much as you want, and, if there is still a tie, it will be arbirarily pick, one lines involved in the tie as #1.

  Thanks for posting the CREATE TABLE and INSERT! It is very useful.

  Published by: Frank Kulash, August 2, 2011 21:00
  Added GROUP BY alternative

• Satellite L505 - 10K - unexpected error when using recovery disc creator

  Toshiba Satellite L505 - 10 k

  Can't do any recovery disk when I open the toshiba recovery media creator, it says: an unexpected error has occurred. Close the program and then restart it (error code: 0D00F6-49-00000015) and then I click ok and then, it is once again and then I click ok and it is once again and I click ok and then the program comes and when I create the disc it comes to audit, but then it says: cannot read the following file. E:------Boot-fonts-chs_boot.ttf (error code: 02015-20-00000000).

  I really need help, I'm afraid something will happen to my computer, so is there someone who knows something about this kind of problem?

  Grateful for your help.

  Hi putte32,

  To be honest I never received this error before but it sounds like that recovery creator disc doesn t work properly... You should try a HDD recovery to restore the factory settings. Maybe you are able to create the recovery disk.

  Otherwise, I would contact an authorized service provider. If you can t create the recovery disk, the guy should be able to help you to complete this procedure.

• How do I create using recovery disc installed Vista - Satellite L300-190

  Can u please help me.
  If I had the factory installed default windows vista, then how to create the recovery disk and can also create usb recovery drive, while I was able to boot my system with usb?

  And also if I m even have another model of machine, then I can use the recovery disk in the other machine with the same model and OS. ???
  as for now, I have two same machines toshiba Satellite L300-190 model.

  Waiting for your response.

  I think that this has been discussed much time here in the forum.

  You can create the recovery disk using the Toshiba recovery disc creator!
  This tool must be preinstalled on your laptop if the laptop was equipped with HARD drive recovery option.

  You can also try to restore the laptop using the recovery of HARD drive option.
  You must press the F8 key during switching on laptop and I then have to choose the option called fix my computer. Then new window should open, and you could choose the Toshiba recovery.

  If you cannot use the two procedures (disk recovery HARD and Toshibas recovery disk) then you can order the new CD from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  All that s