Re: Satellite P15-s470: where the video cables (black & white) connect to mobo?

Similar Questions

• Satellite A200-1AX (PSAE6E) - S-Video picture black, white and rolling

  I purhcased my A200 Satellite on my last trip abroad when I was away from the USA.

  Recently I tried to play a movie via s-video on my Sony TV purchased USA. The image is black and white and hilly. I have updated, updated and done everything possible for computers and readers. I tried an another Toshiba identical to mine, but was bought in the USA. It worked fine and all colors.

  Any help is appreciated.

  Hanks

  Hello

  I had the same problem a few months ago, and the reason was an S-video cable defective. As far as I know it was a very good cable too and I went to the store of the computer purchased a high-quality S-video cable. It was a little more expensive, but it works perfectly!
  Check it!

  In addition, you should check the output signal from the S-video port and the input on your TV mode. If you use NTSC, you have to set this mode, otherwise use the PAL mode.

  Good bye

• Can not play music in media center 2004 on Satellite P15-S470

  Hello

  Last weekend, I upgraded Windows XP Media Center SP1 to SP2 (because MS no longer supports it) on laptop Toshiba Satellite P15-S470 to my father. Tonight, I found that his Media Center 2004 refuses to read audio CDs audio error: "To play music in media center, install Windows Media Player 9 or a repair."

  After a long search on the Internet (e.g., newsgroups and forums), I found this a known issue since the release of SP2 in 2004. He worked before SP2 and other music players (for example, Windows Media Player (WMP) v10 and iTunes v6.x) have no problem. I tried to use Registry MCE 2004 provided by Toshiba and HP fixes (just for fun) and restart, but they did not help.

  Is there anything else to try next to the clean installation of SP2 and the BONE with its software? I was about to update WMP to v11, but I discovered that it does not work in MCE 2004. :(

  Thank you in advance. :)

  Hello

  You have this problem its just at the point where you use WMC to listen to the music CD or also with other players?

  Is there any problem, indicated in the device (sound card) Manager?

• Satellite P15-S470 it turns off by itself - overheating?

  Hello

  3-4 years old laptop Toshiba Satellite P15-S470 my father seems to be overheating because it turns off by itself. It can happen at any time: in Windows XP Media Center 2004 (SP2 and all updates), at the prompt of password of BIOS at idle, at Windows startup, etc.

  Also, I can feel the fan blowing hot air hard left, the area of the battery being hot and the CD/DVD ejected hot.
  Hot note does NOT mean too hot to touch with my hands/fingers.

  I used a flashlight to look through the dark wind, and he looked clean (not so dusty or obstructed upward). I removed a few small items to make more air space for the winds, and that seems to help after a few minutes.

  Is there a program/software for checking laptop temperature sensors? I checked the CMOS area, but you could not like office machines. Site Web de Toshiba does not have one either.

  Are there ways to remedy (out of warranty)? I guess that the fans are still working because I can hear it turn very hard (quieter, if it's cool). I'm afraid it will get worse when the weather warms (Los Angeles weather) in particular this weekend when temperatures reach near 100 degrees (F).

  It is only in low 70 in the kitchen downstair on a glass table. The laptop started doing this a few weeks ago, but it seems to get worse when the weather warms. In addition, the laptop is usually [powered on site thanks to its power adapter.

  Battery use is rare (will try to remove the battery, if the problem occurs again to see if it causes the problem).

  Thank you in advance. :)

  Hello

  You said that the laptop is about 3-4 years of age?
  Hey dude, it is a very long time and in my opinion, the laptop must be cleaned professionally.
  For me it s a clear case. the fans don't run with maximum efficiency and therefore may not cool properly the laptop parts.

  I recommend contacting specialist and portable and it assistance. He could clean the module cooling grids and the fan inside.

• Qosmio F50-114 - how to use the video cable?

  Hello
  I have a Qosmio F50-114.
  I want to capture video via the video cable supplied with the computer.

  The computer came with a video component cable software plug-in (1 x 3, 5mm - 3xRCA white/red/yellow). The only place in the manual stating that cable is the only a-in-the-box-section.

  On my old Qosmio F20, I had a specific connector for the video cable component software plug-in. There is no specific 3, 5mm connector so I suspect that I have to join one of the IR ports, or one of the audio-connectors (?).

  Looking forward to a response.
  / Daniel

  Hey,.

  Don t get me wrong, but I'm 99.9% sure that there is no video port on Qosmio F50. As far as I know that these books are not available, they have a video output only, port but not port of entry to capture video.
  So you mixed up something I think

  What you may be hearing is integrated TV Tuner, but on this port you can only record videos from DVB - T signal.

• Replace the video cable Widescreen Y550 and stop random downs.

  I'm looking for opinions. I have a big screen of 3 year, Y550. The hinges are is detached and has finally folded the video cable a year ago, the battery is dead, and (perhaps because of the set video cable) it sometimes stops suddenly when the screen is in certain positions. Have been plug on an external monitor, I really want a laptop works again.

  My main concern is the latest of the questions. I don't want to spend the money to restore the laptop and just continue off suddenly. Think you that the video cable and stop are related? I think that I can buy a new here a http://www.laptopscreen.com/English/model/IBM-Lenovo/IDEAPAD~Y550~4186-48U/
  All those ordered through this site before?

  Also would it be even worth of difficulty? Be 3 years who knows when something will give. I was considering buying a new Thinkpad T430s rather than repair it.

  Thanks for your help!

  Sage

  
  

• Every time I go to MSN Video he shows videos that I watch, but the part where you watch the video is black and it says it is loading and it is there. I have windows 7

  Every time I go to MSN Video he shows videos that I watch, but the part where you watch the video is black and it says it is loading and it is there.

  I just installed windows 7

  Hello

  ·         What web browser do you use?

  ·         The issue is only with MSN videos?

  Follow these methods and check if that helps.

  Method 1:

  I suggest you install the latest version of Microsoft Silverlight and check if it helps.

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Method 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294

• Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

  As above. I checked the USB port and it is connected.

  Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

  Hello

  1. you receive an error message/code when you try to print?

  2. What is the serial number and model of the printer?
   
  Follow the steps.
   
  Method 1
  Run the hardware and devices Troubleshooter
  This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also run convenience store Print that would help us diagnose the problem better
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2

  (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

  (b) connect the printer to a different USB port and check if it helps.

  (c) check the on another computer.

  Method 3

  Run the fix - it tool from the link.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 4
  If the previous step fails, follow the steps described in the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  Let us know if it helps.

• An unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  I recently bought a drone DJI Phantom 3 kind have been treatment of videos more than usual and not have not had any problems. I use Lightroom for cataloging movies and I use the first to change.

  Since yesterday, I was not able to import any movie that I get the following error

  an unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  

  Initially, I thought that it was due to a spectacular crash of drone (Physics isn't SHE!) who corrupted the file that was being logged, m ais I can now no longer import any movie to Lightroom.

  
  I tried the following

  1. a different memory with a new registration card

  2 removing and re - import an old movie

  3. to remove and re-import and old movie created by another camera

  4. to remove Lightroom and rolling back to the previous version of LR CC (CC 2015 [1014445])-had the advantage of getting rid of the annoying new import dialog screen. -

  5. upgrade to El Capitan to see if maybe OSX update may help.

  
  

  None of them had no effect, can anyone help?
  

  
  

  
  

  
  

  
  

  
  

  Hello

  You're welcome ShawWellPete, I thank you for everything.

  Yes, this person is the windows user, but it was the same question that could have been resolved by quicktime 7. (pending confirmation)

  Try to disable the start-up services and restart the mac and then try: take control of start-up and connection elements. Macworld

  There could be some service startup that is in conflict.

  Concerning

  Jitendra

• How to connect the video cable with Qosmio G50

  Hello

  I bought the Qosmio G50-11s and received a video cable with it. (Jack mini jack RCA Red/white/yellow) But I find no way to connect it to my laptop, not the manual or all online resources talks about it. The problem is that I need to capture video from my VCR to my laptop and normal TV antenna comes with a lot of noise, so I have to use video in the cable. Any ideas?

  Thank you
  M

  Hello

  In the past I made some experiences with it. I wanted to create DVD copy old VHS VCR equipment. Using the recorder even? I did this on Qosmio G30 but the principle is the same.

  The fact is that you need to send the signal to the laptop and to do this you must use the video port.
  I do not see that your Qosmio has several of them, so I think that the only way to send the signal to your laptop is to use the antenna port. What video output port you want to use on your recorder?

• How to make part of the video in black and white and the other part in color

  Hello

  So I want to make this black and white video, but keep what inside the rearview mirror in color,

  I used the black and white masked effect around the mirror, but the only problem is that the camera then moves the mask b & w started out where I need it.

  can someone help me please on how to keep track on the edges of the mirror through the video clip of 30 seconds or more

  Thank you

  

  You don't say which version of the body you use, but in the newer versions, you use these tools to have body follow the matte for you:

  

  More info here:

  Masking and tracking in Premiere Pro

  MtD

• Satellite L500-1UU - disconnect the battery when it is connected to the AC adapter / CC

  Hello world

  I have purshaced new Toshiba Satellite L500-1UU
  CPU: Intel (r) Core i3 CPU M330 2.13 GHz
  Physical memory: 4096MB RAM
  Microsoft Windows 7 Home Premium 6.1.7600

  My question is: remove the battery when I use my computer laptop while its connected to the AC adapter would be wise or not? This would increase or decrease the life of the battery, or it will not affect anything?

  Is i3 processors have a technique of centrino disconnect battery power whent, it is fully charged?

  What do you think of this?

  Hi Khaild Essam,

  I agree with Akuma. There is no problem, remove the battery when the AC/DC adapter is connected. If you can do it. In addition the battery charge will be stopped if it s at full charge. The laptop consumes energy to AC/DC adapter only.

  If you remove the battery and work with AC/DC adapter only, the battery life will be improved a little because it s not in its use.

  I found an interesting document for you:
  [How to get the most out of the battery | http://aps2.toshiba-tro.de/kb0/HTD9401AZ0001R01.htm]

• After you enable SLI on the Satellite x 200 mode the screen goes black

  Hi all

  my name is Alessio and I encounter the following problem with my Satellite x 200-24e with Vista home 32-bit:

  Recently, I updated the operating system and yesterday I updated the VGA driver with the latest version available on the web site of Toshiba (display-20080904102618), everything worked fine but when I activated mode SLI the screen went black.

  I restarted the laptop and I tried to boot Vista on a regular basis, but I still got black screen.
  Then I started Vista in safe mode and reload the VGA drivers to set the SLI mode since the safe mode did not identify the model VGA.
  Can anyone help me solve this problem and get the SLI mode working again (I was able to set the SLI mode before update the VGA driver)?

  Thank you

  This wonderful s information.
  It of strange that the screen was dark after the SLI has been activated but it looks like it's working now.

  Thanks for your comments

• Satellite P100-473 - suddenly the screen turns black

  Hello

  Since a few days, I have a problem with my Satellite P100-473 (with Vista Home installed recently + teamspeak only) after you have installed the latest version of Nero (maybe a detail)
  and do not know how, all of a sudden the screen went black.
  I so reboot and still black but the laptop properly started, the screen is activated (light up/down).
  I'm trying not to switch the display on an external monitor (VGA and DVI) no signal.
  I remove the battery for a few minutes.

  After a lot of irritation I gave it a week, I am again yesterday and after two tests display return with an error (such as a debug message), I forgot to note due to the excitement... ten minutes later same problem again:'(.)
  Yesterday before restarting the screen, I wait to start completely > type my password > sound > wait a minute > and type ESC / enter key at random.

  Can you please help me to find the source of this problem and maybe the solution to solve?

  Thank you very much for your future assistance, I hope you understand my pathetic English
  Best regards

  Hello

  Wait. You said you use external LCD and an external LCD related to this laptop.
  Do you use an external monitor Samsung, and maybe have you installed MagicTune software on your laptop?
  Please check this box.

  As far as I know software Samsung MagicTune can permanently disable the integrated computer Toshiba LCD display screen. Why?
  Because the MagicTune software is designed for use with desktop computers that do not have a built-in LCD screen.
  If your integrated LCD display has been disabled by the MagicTune software, you will need to make an arrangement for repair with a Toshiba authorized Service partner.

  But I hope that you have not installed this software.

• Satellite L350-14F find the router but will not connect

  Hello

  I just bought a new laptop Satellite L350-14F, but I can't seem to connect to my connection wireless broadband.
  My roommate's laptop connects fine.

  The mine finds the network, asks for the WEP key but will not let me.

  I am running Windows Vista SP1.

  Can anyone help?

  Hmm. I recommend you to check the settings of the WLan router.
  If the MAC address filtering enabled and that your WLan MAC address was not included in MAC address filtering, then you would not be able to connect to the router.

  It would also be possible that you try to insert an incorrect encryption key

  Therefore, it would be desirable to disable all the security settings on the router and then try to establish the WiFi connection.
  If this would have functions, then you might reactivate the WLan security settings.

  By the way; Check if an update of the Wlan driver could also sometimes there is some compatibility problems between the Wlan router and Wlan card drivers.