Re: Satellite P200-13Z is on but nothing comes on the screen

Similar Questions

• After RAM upgrade Satellite P100-222 is on but nothing comes on the screen

  Hi all
  could you please help me?

  I have to update my 2x512Mb in 2x2gb RAM modules.
  If a module (2 GB) installed - it's ok.
  If two modules (2 gb + 512 mb) installed, total RAM 2.5 - it's ok
  But if two modules (2 gb + 2 gb) it does not work :(
  When I turn on my laptop the lights come on as usual and I can enter the BIOS but after installation of the screen nothing cam upward on.

  RAM SO-DIMM 2 x 2 DDR2 SDRAM Kingston "ValueRAM' KVR800D2S5K2 modules / 4G (PC6400, 800, CL5)

  Hello

  These things happen usually when you try to use memory modules live not compatible.
  I checked the page of Kingston and Toshiba and modules of 2 GB compatible for your laptop modes are:

  PA3513U-1M2G (memory 2 GB DDR2-667 Kit) or
  Kingston KTT533D2 / 2G 2GB 533 MHz Module

  Good bye

• When I start my computer Windows 7, it starts but nothing appears on the screen.

  Original title: startup problem

  Hello.

  When I start my computer win 7, it starts (fan starts, dvd disk drive turns on, lights on the Tower of keys on and even usb ports give power IE can charge my phone by usb cable), but nothing appears on the screen (empty, nothing, does not react)

  However, after you restart the computer several times active and computer screen display works fine without problems.

  This problem occurs only when I turn on the computer after having completely off but does not happen when I restart using the option restart.

  I'd be suspicious of an imminent hard drive failure.  Download and run the program tester for the manufacturer of your hard disk drive.  Give me the model number of your player (Device Manager), and I'll give you the link to download. At least, you have to exclude this possibility before you spend a lot of time trying to re - build.

• nothing comes on the screen but I can hear the game.

  nothing appears on the screen but I can hear the game, it's just a blank black screen.

  Hi TiaBurt,

  (1) what version of operating system do you use?

  (2) game that you are trying to read?

  (3) have you been able to play the game earlier?

  (4) you are able to play games without problems?

  First and the best suggestion for now would be to uninstall and reinstall the display updated the manufacturer drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Retrieve information for assistance

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite P300 - on power turns on, but nothing happens on the screen

  Hello

  I have a Toshiba Satellite P300-1F0, yesterday it was working fine, I turn it off nothing extraordinary happens.
  Although later, when I went to turn on I pressed the power button, but the screen was not working, I tried to connect an external display but nothing showed on this subject, although the power of lights was turned on, the drive CD opened and closed as normally don't and I could hear the fans work.

  That I realize windows 7 welcome sounds were not playing even after a few minutes with the laptop turned on and the laser mouse was working only for a few seconds before it shuts down.
  It was when I started to believe that this was not a screen problem, but something else.

  I have read a few forums and I tried to unplug the power cable, remove the battery, press the power button for 60 seconds and turn it on and it worked, it worked fine, I used the computer for a few hours without any problem.

  Today the same problem has occurred, and I tried to set the same way as I did yesterday, hold the power button for 60 seconds, but this time it did not work. I retried it for 3 to 5 times and nothing.
  After a few hours, leaving the computer is off, resting, I retried the process and now it worked.
  Now I'm afraid to turn off the laptop, because I need a lot of time and patience range to activate.

  What could be the problem and how do I solve it?
  Can you help me?

  cumpliments,
  Adriano

  > I have read a few forums and I tried to unplug the power cable, remove the battery, press the power button for 60 seconds and turn it on and it worked, it worked fine, I used the computer for a few hours without any problem.

  Yes, this workaround is sometimes useful to bring back the unity of life.

  > What could be the problem and how do I solve it?
  It's hard to say what causes this. Satellite P300 is an older model mobile phone, so it is possible that among the pieces of equipment begins to malfunction.
  It would be interesting to know if the use of the various modules of RAM would change the functionality of the laptop. If you have compatible RAM modules spare you can test it.

  In the worst case, it could be possible that beginning of motherboard laptop malfunction.
  It would be the worst case I hope for you that it s not mobo related issue.

  PS: Check if your BIOS is up to date. In case this is not the latest version, try to update the BIOS.

• Graphic problem on Satellite P200-13Z

  Hello

  Satellite P200-13z running 32-bit vista - intel graphics software displays + does not work because of insufficient resources + other checks indicate that the chip has no allocated memory.
  Machine runs Ok'ish on the LCD screen in mode VGA base but of course, for many programs, it is no good.

  Version 1.7, nothing in there to allocate memory for the graphics chip - as in other systems with built-in BIOS system memory for graphics.

  System has 1 GB of ram - updated 2GB with no difference.

  When I bought the laptop H/d has been deleted for reasons of safety, replaced by the new HD & reinstalled vista from a recovery P200D disk then download specific files for this machine from the Download Center, am I missing a file important?

  How do I allocate memory of the chip or do I have a defective chip / / cpu / / mb or other?

  You can not install image of P200D on P200. Both models have completely different hardware platforms. Images of recovery are individual and model specific images.
  If you want to play a little bit and test if you get it working it's Ok, but you also expect that some problems will occur.
  All with images is not so simply as you think.
  Toshiba has designed images for the use of certain models only. It will be too easy to buy a laptop and use some images on different specifications.
  I mean you pay a license and install on 10 laptops. You understand what I mean?

  If you do not have original disk recovery facilities use bare BONES Setup with disk Microsoft facilities and subsequently install all necessary drivers, tools and utilities download page following the link you have posted here. You will see that everything will work well.

• Satellite P200-13Z - upgrade the hard drive - can I use SATA II hard drives?

  I have a Satellite P200-13Z with simple standard Fujitsu 120 GB SATA hard drive. I want to change this to a RPM SATA II 250 GB Western Digital 7200 RPM drive. This interface SATA laptop does support SATA II? Thank you very much!

  Not your portable computer does not support SATA II.

  However, you can buy the SATA II hard drive and put it in your laptop. Only way to get it going is to restrict the new speed of SATA HDD, I accelerate. To do this is to introduce a jumper on the drive to restrict it to SATA I speeds up. Once it's done put in your laptop and viola, it works.

  Good luck, but I would like to get a toshiba technician to install it if its under warranty. It's for your own good, so you don't turn your laptop into a boat anchor.

• Satellite P200-1 to 4 does nothing on AC/battery

  Hi all

  I have a problem with my Satellite P200-1 to 4.
  When I connect the battery to the power adapter, the laptop does nothing (no lights, no sounds)

  When I dosconnect the battery and leave the AC in place, the system starts normally.

  I tried another battery of a friends P200-1 has 4 (that works), but in my laptop, nothing is left.

  It seems therefore that I can use the laptop on the sector now.
  One of you had a simular problem or have a solution for me?

  Thank you very much!

  What happens when you start Notepad with ca only, but when loading the battery operating system is placed in the laptop again? Battery is correctly recognized?

• Why did NVIDIA driver installed on Satellite P200-13Z?

  This might be a bit a thick question but can someone tell me why when I go to change program/uninstalling, I have a program
  NVIDIA driver does it say I or you can get it if so how?

  My graphic is Intel
  I have series Satellite P200-13Z

  Hello

  I agree with Garrett. Recovery image is obviously designed with different display drivers and can be used on the same model laptop but with different graphics adapter.
  I'm sure that you can remove this preinstalled software from NVIDIA.

  Anyway, this does not permanently affect stability and performance of the laptop.

• Network drivers required for Satellite P200 13z PSPB0 Win XP wireless

  Hi guys,.

  There was vista home installed on Toshiba satellite P200-13z (PSPB0). I made mistake by installing vista first hard disk half and then installed xp pro on the rest of the hard drive. Now my phone won't show me dual boot menu

  On my C - Vista drive

  On my drive D - XP

  When I start my laptop, it just goes straight path to XP, so I'm not able to choose vista on my laptop even, it's there.

  XP took the other driver except them Chicony usb 2.0 cam, PCI Device, video controller and the network driver

  I looked on the download site of Toshiba and only able to find Realtek RTL8139/810 x player Lan, which I installed it, but still, my wireless network does not.

  Now I don't know what network driver I required to connect to internet through wireless (Wi - Fi) for my XP operating system

  ADV me please this as other drivers I need to download and the place where, so I can connect to internet with wifi.

  .

  > When I start my laptop, it just goes straight path to XP, so I'm not able to choose vista on my laptop even, it's there.

  I had the same problem after installing Win XP on my laptop.
  The fact is that Win XP destroyed the Vista Boot Manager and so you can not choose the Vista operating system.
  But you can fix it using the MS Vista disc (not recovery disc). Simply start the Vista disc and choose the repair option.
  This will solve this problem.

  But after that you will not be able to start Win XP.
  The solution; go to Vista, install freetool called EasyBCD and include the Win XP operating system and partition for the Vista Boot Manager.
  That helped to me.

  Regarding the WiFi network:
  The laptop uses the ATHEROS 802. 11B / G WLan card.
  See this page:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Hope I could help you

• Question about a Satellite P200-13z graphics card upgrade

  Can I upgrade the graphics card on my Satellite P200-13z? What are my different options and the corresponding prices?

  Only, I built in 3D accelerator card intel.

  Hello

  These issues have been several times here in the Toshiba forum and there is only one answer.
  It s not possible to update the graphics card on any laptops!

  The GPU is mostly welded and mounted on the motherboard and it of impossible to remove it!

  You ask for options? Well, I read on maps external graphics for laptops, but in my opinion, this isn't a real option and don t think that the performance of this graphics card would be much better that your graphics card internal laptop P200

• Satellite L670D-103 - nothing displayed on the screen

  Hello, please help, my laptop does not start!

  When I push button 'ON', there is nothing displayed on the screen, but the fan is running, the lights are on except the HARD drive light. The motherboard seems to be ok then, but there screen is always black! For your information, my HARD drive is nearly full (319, 8 GB / 320 GB) and I did not create Toshiba recovery disc

  What is a screen or an OS problem, and how can I fix it? The screen display depends on the OS to start and the screen won't work if the OS is recovered?

  Thank you
  Concerning

  Hey,.

  Theoretically, it could be a malfunction of the card Mother poster to find this point connect an external monitor to your laptop and if the internal display is faulty, you should see something on the screen. Otherwise another part is at the origin of the problem.

  This problem has nothing to do with the HARD drive. Even without disc HARD is installed you should see the screen of the Toshiba BIOS at least.

  Why you have not created the Toshiba Recovery disk?
  The recovery disc can restore the factory settings on the HARD drive, but in this case it will not help you. Recovery disk is only software (Windows).

• When I print, the printer sounds like its printing but nothing comes out on the page. What should do?

  I just installed an hp F4480 printer, my roommate gave me.  My OS is Windows XP.  When I try and print or copy something the printer looks like it's printing and the paper passes by like it is printing but nothing comes out on the page.  Perhaps is out of ink, I guess, but I don't know how to say and I don't want to spend $50 to get a new non-refundable ink cartridge to see.  I did a print test page and the only thing that came out was a light that said the Page of Test printer Windows XP Blue cap but nothing else was on the page.

  It's really a problem of HP, not a Windows problem, and you should look for the HP Support help site.

  However...

  One of the lights on the printer are flashing?  There are 2 'estimated ink level lights' on the front panel.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01673672&tmp_track_link=ot_faqs/top_issues/en_us/c01673672/loc:3 & cc = us & dlc = en & lang = en & lc = en & product = 3742086

  Genuine HP ink cartridges are installed?  The cartridges have been completed?  How long did it that the printer is correctly printed?

  When you installed the printer, you have installed the "HP Toolbox" application (or you simply download and install the basic printer driver)?  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=3742086#N44

• The box at the top right shows that I have an unread message, but nothing appears on the list of received messages. .

  The box at the top right of the hotmail page shows that I have an unread message, but nothing appears on the list of received messages.

  Hello

  The question you have posted is related to Windows Live Hotmail; This is why it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  http://www.windowslivehelp.com/product.aspx?ProductID=1

  http://www.windowslivehelp.com/

• says it is printing but nothing comes out

  All-in-one HP Psc 1350

  X.7.2 OS

  My utilities said printer sends the document to the printer, even shows % finished (no message offline or idle), but nothing comes out of the printer.

  Also impossible to install the software as "PowerPC is no longer supported.

  Thoughts?

  Hi the4kosmos,

  Indeed the software on the CD supplied with your printer, or also the software available on the HP download pages are not compatible with Mac OS 10.7 Lion. However, you can install the HP Printer Driver Update 2.8, which contains the drivers printing and scanning (via print & scan, preview or Capture of Image).

  You may already have? If not and you use a different print driver, I suggest that you simply remove the current printer queue. Make sure that your device is connected directly to the USB port on your Mac. Then add the printer and you should get a message that there is software available to install - accept, so installing the respective drivers. See this document for more details: OS X 10.7 Lion: install and use the printer with Lion

  If this message does not - maybe you're not connected to the internet - you can also download a full package of the HP Printer Driver Update 2.8: HP v.2.8 OS X printer drivers

  Information on how to scan without the HP software, you can find here: How to perform a scan in Mac OS X 10.6 and OS X 10.7 without use of the HP software

  On the question of printing, make sure that your device is connected directly to the Mac's USB port and the USB cable is not longer than 3meters. You can also try another USB port and USB cable to another if the problem persists.

  Hope the information is useful.