Re: Satellite P200 - error recovery

Similar Questions

• Satellite P200 - error when creating new recovery disc

  Hello

  I need to format my Satellite P200, but I have some difficulty. I lost the original disc that came with the laptop. I tried using the Recovery Disc Creator, but every time I run the application it I'm greeted by this error:

  An unexpected error has occurred.
  Exit this application and start it again.
  (Error code: 0D00F6-26-00000001)

  Have tried to reinstall, I just get the same error. What should I try next to the difficulty of the creator, or just the format differently?

  Hello

  I'm not very well if the Satellite P200 was equipped with drive recovery procedure HARD but nevertheless it s m worth a try.

  If the HDD recovery procedure is available on your P200, then you should see the Toshiba HDD recovery option in a new window as soon as you click on fix my computer.

  Otherwise, you will need to order the Toshiba Recovery disk:
  https://backupmedia.Toshiba.EU/landing.aspx

• Installation of Satellite P200-144 recovery disk problem

  Model Satellite P200-144 PSPBGE

  Hi all

  Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

  Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

  My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
  Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

  In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

  Try to rename all the letters of potential left to HDD0
  Try to rename all the letters of potential left on HDD1

  Microsoft DiskPart version 6.0.6000

  Copyright (C) 1997-2007 Microsoft Corporation.

  On computer: MINWINPC

  Disk 0 is now the selected disk

  DiskPart succeeded in erasing the disc

  DiskPart succeeded in creating the specified partition

  Partition 1 is now the selected partition

  DiskPart successfully assigned the letter of the drive on the mountpoint.

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart succeeded in creating the specified partition

  Partition 2 is now the selected partition

  DiskPart successfully assigned the drive letter or mount point

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart marked the current partition as active.

  Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
  RECO-info-imagecount value = 2
  define the RECO-info-partnumber = 1
  RECO-info-numsplit value = 5
  RECO-info-bootindex value = 0

  L ' ImageX for Windows tool

  Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

  Progress: 67% 06:44 minutes

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  Error image restoration.

  The file or directory is corrupted and unreadable.

  Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

  Is there a reverse this problem?
  My thoughs is that the image is corrupt.

  The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

  Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

  If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

  0844 847 8944

• Satellite P200 - Product Recovery Disk 2/2 does not work

  Hello

  because my laptop (Satellite P200 - I bought in December 2007) does not work more properly - and when, after a lot of cleaning it still wasn't working properly - I decided to start from the beginning and restore the operating system with 2 product recovery cd / dvd.

  Recovery disk 1/2 worked well - Windows Vista Home Premium product is loaded again on my computer.

  But what abot * Disck2/2 product recovery? *
  At one point, the recovery program calls for a 'supplement' but when I put in the product recovery disc 2/2 at this time, that the program does not recognize the disc. During the rest of the recovery program the program didn't ask for Product Recovery Disk 2/2, so the content of this CD-ROM/dvd now is not loaded on my laptop.

  Someone had this problem too?
  What do you have on this?
  Is this a problem for not loading the content of the product recovery disc 2/2 (I can go without it?)?

  Thanks in advance for any response!

  Artisans

  Post edited by: craftsmen

  Hello

  > Products 1/2 worked well - Windows Vista Home Premium recovery disc is loaded again on my computer.

  I put t know which modules the tool called for, but AFAIK the Toshiba image contains the operating system Vista, Toshiba drivers and additional software.
  So if you've recovered the laptop using the recovery disk Toshiba 1 then the laptop must be set to the SAME State as at the first day of the purchase.

  PS: what files you can find on the second disk?

• Satellite A200: Error recovery - file Preinst.swm error: F3-F000-0008

  Hello.

  I'm really not good at computers and things, but I'll try my best to describe the error in my laptop:

  I have a Satellite A200 (with Vista), I bought about 4 months ago here in Australia. There a virus last week, so I made the recovery disc on 2 new blank DVDs using the recovery disk creator and creation process went smoothly without glitches.

  All right then, I ran the recovery disc in what, in my view, is called the start menu? Anyway, after a few minutes I kept getting an error message that has something to do with 'Preinst.swm file. After a couple of times of clicking 'continue' and see this same error message by clicking 'ignore' and running the 2nd DVD, an error message "error: F3-F000-0008". "»

  Now I assume that the error preinst.swm is due probably to a scratch in the recovery disc, or some fault in the DVD that I used and not with the portable reality itself. I just need confirmation you guys on this subject.

  I guess the best way to go is just to have an another Vista recovery disk (from the store, I bought the laptop from) then? Or y at - it another way to solve this problem I can do before I leave to the experts? I use this laptop for work so really - no laptop, no work!

  Thanks in advance.

  Really not easy to say why the restore procedure does not work.
  But for me, one thing is clear.
  If you have 2 recovery DVDs, you must always start the first!
  If you start bad DVD, you will always get an error message.

  To my knowledge the laptops computers Toshiba for the European market are delivered with all necessary CDs/DVDs and the recovery media is still in the package.
  I put t know why Toshiba Australian didn't send the DVD of recovery as well as the laptop. Perhaps the recovery DVDs are simply available, and they offer only an option for the creation of a collection. Who knows...

  However, it is s try to contact the service provider allowed in your country and ask if you can order a new CD from recovery for you laptop.

  Good luck and best regards

• Satellite C750 - error recovery

  I have a laptop Toshiba Satellite C750.
  He had to be reset.

  I inserted the recovery and the DVD of drivers/Application. An error has occurred.

  «Windows cannot find ' X:\BINERRORDIALOG.» EXE'. Make sure you typed the name correctly and then try again. To search for a file, click the Start button, and then click search. »

  To me, it seems that the recovery using recovery disks procedure does not work.
  The recovery disk worked on the past?

  If not and if you attempt recovery of the laptop for the first time while there must be something wrong with the environment and I think that you only have one option:
  You need to order new disks of Arvato service recovery:
  http://backupmedia.Toshiba.EU

• Satellite L300D - error recovery disc creator

  I have a Satellite L300D and you must return to the original settings. But the recovery disk didn't work (C:\Program Toshiba Toshiba Recovery Disc Creator\TRORDCLauncher.exe the specified path does not exist). Now I dind't know what to do.

  you have burned a disc before recovery? I ask because it's not possible to make it more - the specified path does not exist

• Satellite L300 - error recovery disc creator - disk is scratced or dirty

  Hi all

  I tried to create recovery disks for my L300, but after a 1-2 minutes, the program stops and says: 'Please check if the disc is scratced or dirty, if so, try again with a new disc' error code 0E01B5-26-2A030C00.

  I tried this many times with many different DVD in recent weeks, but this continues to be!

  The machine is old just a few weeks and run Vista family premium advice please as Im stuck.

  Thanks for reading.

  Hi mate

  I think that you have used are simply not fully compatible disks and supported.
  In my case I couldn't t create the recovery because the CD/DVD drive was not able to manage it.

  Is that many CD & DVD discs supports properties and different standards and in many cases, CD/DVD players have a lot of difficulties to manage different disks.
  I think you should just test some DVD-R discs.

  I use DVD-R and was able to create the recovery disk.

• Satellite P200-1EE: recovery of product affects both drives?

  I have the P200-1EE that has 2 internal hard drives > drive C and drive E. Drive C is the one who has installed on Vista and drive E is were I keep my backup files.

  I really want to use a recovery because I have a lot of junk and the system is running a little slow. I just want to go back to factory settings and I know I can do this with my recovering product DVD.

  My question is is it just reformat the C drive or it will erase data from drive E too?

  I backed up my data to the E drive and I really need the files it contains. I don't want to just that it will be removed to recover the system.

  The recovery procedure, you delete the whole HARD disk. This means that the partitions and the data stored on them will be gone.
  So, before you begin the recovery procedure back up all your important data.

• Satellite P200 - product recovery does not start

  Hey

  I'll explain my problem as short as possible:

  With my laptop, I have a recovery cd of the product, I used. After starting the laptop, I pressed f12 and select the cd/dvd in the next window. So far so good, windows began to load the files. Now, here's my problem: after loading the files, nothing happened. There was a black screen for a long time. I tried a few times, but every time the same problem.

  I hope someone could help :)

  Concerning

  Cottages created DVD do you use?
  I put t know what the problem may be, but somehow the HARD drive first and foremost activity blocks. Maybe the disc is troublemaker.
  In any case, the value of the default BIOS and test it again.

  Try to get the original Microsoft installation disc and check if the installation of windows will have full access to the HARD disk.
  Please post comments.

• Satellite P200 - error code 19

  DVD player does not start. This is a misconfiguration in the register information, code 19. Who knows a solution to this problem?

  The problem occurs without any change in the system.

  Hello!

  If the work of CD/DVD drive doesn t and code 19 error apperas means that it s something wrong with the upper and lower filters.

  You should read this article from the Microsoft Knowledge Base. It s a common question and you will find also more information here in the forum:
  http://support.Microsoft.com/kb/314060

• Recovery on my Satellite P200 disk error

  My laptop was an error bluescreen recently and repeatedly crashing, so I decided to restore my laptop to its State at the beginning...

  Both drives are very well during the installation but then I get this error:

  ERROR: 10-FC12-0570

  Error recovery...

  What this means?... need help on this one...

  Hello Bravo

  If you check this section of the forum, you will find several threads with an identical or similar question.
  I put t know why this happens but obviously this error is caused by default HARD drive.

  Do you get the new HARD drive?

• Satellite P200 Vista Ultimate - boot configuration data read error

  I have a Toshiba Satellite P200 running Vista Ultimate.

  Recently I started having a problem after restarting after the installation of vista updates. In fact, it will not start at all and gives me the following message on a black screen.

  Windows could not start. A recent change in hardware or software can cause of bethe. To solve the problem:

  1. Insert your windows installation disc, and then restart your computer
  2. choose your language settings, and then click Next.
  3. click on "repair your computer".

  If you do not have this disc contact your manufacturer aministrator or the computer of the help system.

  File: \Boot\BCD

  Status: 0xc00014c

  Info: An error occurred trying to read the boot configuration data.

  The only way I can fix it to insert the recovery dvd and click on repair. This levonorgestrol only when the computer restarts after an update. If I manually turn off the computer, then on start up fine.

  I don't want to put automatic offf to update more because I think they are important from the safety point of view, however, this situation is not acceptable.

  Can someone please help.
  I have a screenshot of the error, but have reproduced the information above.

  Hello

  In my opinion, there is something wrong with your mater boot (MBR) of the drive and therefore the bootloader causes an error.

  Usually, you might be able to fix it using the original disk of Vista but it s really strange that this problem still occurs after the update to vista.

  In my eyes, you should really check if the same problem would happen using the Toshiba factory settings and configuration.

  Good luck

• Re: Satellite P200 - 1 FT fully formatted, recovery

  Hello Forum Toshiba,

  I have a problem with my laptop (Satellite P200 - 1 '). I hope you can help me :-)

  I want to sell my laptop and so I wanted to completely remove my all data on the hard drive. I used a tool called dban (http://www.dban.org) and it worked fine. After formatting, I wanted to restore Windows Vista by using the Toshiba recovery disc.

  The problem is: when I boot the recovery cd, I can choose the language and the system to be installed (Windows Vista), but then, there are two cmd Windows, which displays an error:

  http://S5.directupload.NET/images/080913/lmmgun9v.jpg

  http://S8.directupload.NET/images/080913/8i9cn9bz.jpg

  I think that it was not a good idea to delete the partition X:\! ? And I think that there is a required Raid driver. Is this fair? What should I do now to recover Windows Vista?

  Please help me, thank you
  XeroX

  Hello

  According to the error message in your first posting above (screenshots) disk HARD is not found because because the SATA driver is missing.
  The laptop uses the SATA HDD controller and without a driver SATA HARD drive may not be recognized.

  I put t how this 3rd part tool works, but the driver SATA is downloadable from the page of the Intel driver.
  It s _Intel Manager_ of storage and the single SATA driver files located in the folder * 'F6flpy '. *

  See you soon

• Recovery failed on Satellite P200

  Hello.

  At the beginning I wanted to install WinXP on a Satellite P200 but then I read many things on the internet and which might be more difficult than I first thought.

  Now, I only get it back with the RecoveryCD came with the laptop.

  It s my cousin's laptop. It of a little slow and has a lot of garbage on this matter, we decided to update the system.
  But the Toshiba Recovery says:

  + Cheking HDD1 +.
  + HDD1 found! +
  + BIOS 0 is disk 0 +.
  + BIOS 1 is disc +.
  + ERROR: GETHDD get physical disk HARD failed! +
  Press any key to continue... +.

  So I press a key, it says:

  + Waiting for ODD vacancies... +.
  + STRANGE ready F: drive. +
  + Check for support in the F: drive... +.
  + Continue... +.
  + Failed to initialize the raid class. +
  + No RAID - proceed normally... +.

  + X:\windows\system32>+

  I'm not able to recover, but I have no idea why. I also Don t want to delete everything before making the recovery, cause I m afraid that nothing will work after that.
  Notepad starts in Vista, but it is slow, as I have said before. Is there a chance the recovery work?

  The CD is very good and has never used it before and it is also the original.

  Thank you much for the help.
  Anna

  EDIT:
  I forgot to say, I followed the instructions on the CD case. I restarted the computer and you press F12, and then I chose the DVD drive and then start the CD. But I have not tried on the running system of Vista, because everywhere I read it wrong.

  Hello

  I read your ad three times over but now I m a bit confused

  If you want to return to factory settings, you must only start since the Toshiba recovery disc. Before the disc begins to install the new OS the whole HARD disk will be wiped so before recovery you can install everything, also Linux, Vista or something else because it will be deleted.

  So please follow the instructions on the CD case you have posted. I put t know where read you that isn't true, but in fact the drive erases the HARD disk and installs a new OS.

  If you have any other questions, please let us know.