Re: Satellite P300-135 - Gothic 3 problem "FN".

Similar Questions

• WiFi with the Satellite P300-135 problem

  Hello

  Here's my problem:

  I removed VISTA and installed XP on my Satellite P300 - 135 (PSPC4E). After that, I downloaded all the drivers for XP and installed. But the wireless card is not recognised and in Device Manager there are two features of problem:
  -Device on high definition audio bus modem and
  -Network controller.

  I remember well the type of my wireless card and tried first with Realtek, but it did not work. Then I tried with Intel and Atheros drivers, but they do not have too much work.

  I hope someone can help me, because I don't want to go back to VISTA.

  Hello

  According to the specifications of the laptop Satellite P300-135 has Intel 11 a/b/g (13ch) - Golan WLAN card.
  Have you tried installing WXP driver for WIRELESS Intel network card?

• No sound through HDMI - Satellite P300-135

  When I plug the HDMI cable from the laptop to my tv, I have no sound in the speakers on the TV, I only got sound in the laptop speakers. Could you help me solve this problem?
  Notepad is Satellite P300-135.

  You have enabled digital output (HDMI) in reading device? You can find it in the sound properties.

• Satellite P300-1 year - Touchpad problem with AC adapter / CC

  I have a laptop Satellite P300-1 year and from the beginning (two weeks)
  I have a touchpad problem: it will not immediately responsive and the pointer shakes when pressing the key. Very often, it freezes for only one or two seconds.

  It's VERY annoying. A USB mouse works perfectly.
  I tried to reinstall the drivers of the ALPS, tried Synaptics ones, just try Windows Vista drivers: no way.

  Now, I found the reason: this question is present only when the laptop is powered by the AC adapter / CC.
  With the battery, the touchpad is perfect.

  I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore!
  Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  Anyone had this same problem?

  > I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore! Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  The point is that your laptop should be always verified using the Toshiba factory setting.
  Why? Because the ASP wants to make sure that this issue is not related to a software problem (compatibility problems with applications 3rd part). Software problems are not covered by the warranty.

  In addition the ASP will always recover the laptop before the verification of the pieces of equipment to malfunction. Therefore, you should always back up your data from the HARD disk until you send the laptop to check.

  I recommend you to reinstall the operating system using the Toshiba recover disc and then check if the problem appears.
  If yes you can contact ASP and could provide all the necessary details for only one technician.

  Good bye

• Satellite Pro P300-135/Windows Vista / problem with microphone and Crystal

  Hello

  Can someone help me please? I reinstalled my Vista and my microphone does not work. When I try to plug in my headphones, they are also dead. Nobody knows what kind of drivers can be responsible for this?

  And how you try reinstalling Vista? Using the recovery image (factory settings) or you try to install the clean version of Vista?

  Sorry, but I don't see any sense why you are doing this. Your laptop comes with Vista. Is there a particular reason to achieve?

• Satellite P300-135 hangs when it is in mode 'sleep'

  Greetings,

  My brand-new P300 Satellite crashes sometimes mode "Eve" of Vista, and I can't recover with just one stop.
  (eve of XP works fine)
  I see that others have experienced similar problem, but in my case seems to happen when I accidentally Tickle (on USB) mouse while switching "Eve".
  I just updated the BIOS with the latest version, I have disabled wake up on LAN features, but the problem is still on.
  Also sometimes revives of idle if I accidentally touch the mouse, the event if the lid is closed.

  What should be the mouse with the mode 'sleep'? I see no other option of power that is related to the USB.
  Any other ideas?

  Hello

  It seems that this issue has nothing to do with the material of laptops because it works fine on Win XP.
  As you say maybe external USB mouse causes this problem, and we must try to find out why it is happening

  In the BIOS, you can find the option called USB Sleep and fresh.
  Please disable it!

  I'm not very well if it will help you, but you should try this m!

• Satellite P300 - re-connection Bluetooth problem

  Good day to you all,.

  I bought a laptop Toshiba P300 BB with WiFi and bluetooth Windows Vista certified.
  Everything works fine with only the exception of the connection between my mobile phone (Nokia 6300) and the program "Nokia PC Suite"
  When I put the PC in 'sleep' by closing the lid of the screen, the bluetooth with the phone stop connection (it seems to be ok)
  When the PC is wake up by opening the lid of the screen, it will start, but the bluetooth between the phone and the PC (Nokia suite) connection is not recognized. Even trying to do it manually.
  To reactivate this connection automatically, the computer must be stopped and restarted re - a.

  The PC power is set to power and battery on "never stop".
  The action of closing the cover of PC screen is set to 'sleep' (French intelligence)

  What is going on? and what needs to be done to fix this problem?
  All your 'lights' on this topic will be welcome
  Thanks a lot
  JCP

  Hello

  This question must be post at Nokia. They have designed this software and before software is released, it must be tested. I assume that they test it on several different laptops and desktop computers.

  So why this third party software doesn't work on Toshiba must be answered by Nokia.
  Computer laptop manufacturers don't offer support for this software and cannot be responsible for the feature.

  In any case, for me is not the big problem. It cannot be that difficult to turn off the connection before switching in standby mode, or maybe close to Nokia PC Suite. After waking up, start the software again and it should work properly.

• Satellite P300-135 system issues using two HARD drives

  About a month ago I bought a faster hard drive for my laptop (because it wasn't hard drive 5400 RPM by default), and computer technicians to the store where I bought my laptop has recommended a Seagate Momentus 7200.4 250410.

  The first couple of days everything went smooth, but after that, every second, restart my OS (Windows 7 Ultimate 32 bit) reports of problems with my video card, sometimes 'Windows cannot initialize the device of this hardware driver. (Code 37) ", the other time"Windows has stopped this device because it has reported problems. " (Code 43) ", and when this error occurs, the keyboard and the keyboard do not work too.
  I made a simple and primitive diagnosis by deleting the second hard drive and rebooted 5 or 6 times, and everything went very well.

  So I think the problem is that the laptop has not enough power for two hard disks. Is it true, or is my phone begins to fail?

  Sorry for my mistakes of language, but English is my second language.

  Hello

  Usually the second HDD should not affect the performance of the system, but it of impossible
  So maybe you should test the specifications and performance of OS using another HARD drive maybe a HARD disk that takes in charge of 5400 RPM

• Re: Satellite P300-135: No. SPDIF in 'His' Panel after the installation of SP1

  Before this one had speakers, HDMI and SPDIF.
  Now - only speakers and HDMI.

  After all the works of S/PDIF through speakers device, but only in stereo mode.
  I need 5.1 DD!

  Could be another reason for that?

  Hello

  The SPDIF port is certainly available on this laptop.
  I remember that some devices can be hidden, if they are not enabled.

  So maybe you can do a right click in the Panel-> Sound and could mark called options hidden devices and features see the disabled.

  Then the SPDIF should reappear.

  Check it!

• Photo graphic to blink and beep when light Satellite P300

  I hawe toshiba satellite p300 - 135 with 32-bit original installed Vista Home with cane when I bought the new laptop.

  After 2 years of use normal and all the working laptop suddenly start when turned on during the boot process, a strong sound signal without possibilities to mute or sound enthusiast make with sound pregnant control potenciometer, also when I run windows and normally use the video image on the start screen blincking (the video from the beginning of the video card will Flash on the LCD video output) and the windows begin to be useless for use normal.

  Help, please

  What we have already done:
  -not scanned everything with good antivirus AVIRA (doubt to be a virus problem) no virus found in memory or on disk
  -total complete reinstall from the DVD sistem beckup (when the laptop was buy new)
  -Battery and BIOS battery disconnected too long to carry out all the data of the memoryes (doubt to be a virus problem), after recoonection the bios battery and battery problem even begin to occure.
  Nothing helps

  I looked on the forums of thet is battery problem (defect battery) but no luck in the clear sollution or explanation.
  I don't usually buy new battery (if it is 100%, which is the source of the problem) becuse I would that my laptop works perfectly without battery also only be connected to 220 V adapter if its possible.

  Help, please

  In my opinion, this is not a battery problem.
  Have you noticed that if the laptop is connected to the power adapter only and if the battery is not connected to the laptop?
  If there is no difference then I would say that the question is not the battery problem.

  Maybe it of problem of graphics but did you try to update the display driver? \
  If this is not the case, try this!
  In addition, I would recommend checking the computer laptop and external monitor.
  If the same could not be visible on the screen internal and external monitor, the graphics card can be affected.

• Touchpad on the Satellite P300 problem - 15 d

  Hello world!!

  I bought a Satellite P300 - 15 d and I am experiencing some problems with the touchpad.

  I simply turn on the pc, and sometimes the touchpad doesn't work, sometimes not.

  I tried the FN + F9 key, but it just doesn't work. Even the touchpad appears in the list of system devices.

  I find that the web and this Toshiba forum supported by aid, but I've not found anything related.

  Please help me!

  Look like a hardware problem that should be checked by a technician or an authorized service provider.

  If I were you I would click [here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871], look for the nearest ASP in your country and send my machine to them to fix this.

  Welcome them

• Satellite P300 - problem after BIOS update

  Hello
  I have:
  Satellite P300-20 b
  PSPCCE-05J011RU
  I updated my BIOS with this update of the BIOS of your site (30/04/09, 3, 40 - WIN version)
  My problem is:
  Loading and relocation of attempt of Windows, the following error message is fixed:

  "Technical information:
  STOP: 0 * 0000007 B(0*F78DE524,0*C0000034, 0*00000000, 0*00000000)'

  So I can't respond to a portable computer HARD drive, the HARD drive is defined in the BIOS.
  Also I checked the HARD drive on the virus, it's pure against viruses.

  Could you help me to update the BIOS to a working condition.

  Hey Buddy,

  This stop code means you use a bad SATA controller driver. The installation of XP, to integrate the SATA driver for install XP. There is a lot of discussion on this issue here in the forum.

  For Intel chipset, you will need to download Intel Storage Manager of Toshiba's official site and follow the instructions here to reinstall Windows with the SATA drivers:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  Solution replacement follow the instructions posted by peterk_1. Setting IDE mode instead of AHCI in the BIOS will help too :)

• LED power button problem FIXED on Satellite P300

  Toshiba
  LED power button fix

  Toshiba
  Satellite P300-h-13

  By Thom
  Wijtenburg

  First of all, I would like to
  say you that I came up with this correction, after a clean reinstall of the
  Vista. (I used the serial number of windows on the bottom of my laptop for)
  install, so it's the same license as the OEM of windows and therefore
  Tout_a_fait legal.) After the clean install and installation of all the
  the drivers listed on the site of toshiba LED power button (also
  known as the mute button) and the CDDVD butten (mediaplayer button)
  stopped working. After browsing around forums toshiba I found
  this case, I removed the support button utility that the mute button has acted as
  a mute button. Also the mediaplayer button worked fine. Reinstalled
  the utility support for the button and they have stopped working. After many
  toshiba calls (I think about 5-6 in one day) they opened a
  support ticket for me, because they (team support callcenter)
  could not find a solution. Following their advice, I did the
  next to try to make it work:

  * Don't have a system restore with the restore DVD.
  * Do you have an another clean install.
  * Install the drivers in various ways (alphabetically reversed by alphabetical order and order of collection DVD).
  * update my BIOS.
  * downloaded a 'new' version of value added package (which was the same thing I already had).
  * installed the VAP with and without technical support button utility, no changes.
  After doing everything
  This, they said that they did not know the cause of my problem (at the beginning
  they thought it was hardware related). They came with a possible
  anwer:

  "It is."
  possible that we removed some features of windows vista
  operating system so that our one utility for device drivers
  work. In addition, we do support the configuration, that we delivered
  When you bought the laptop. »

  Now of course, I have
  understand that. I waited allmost a week, no response. Neither
  by electronic mail, or by phone, so I decided to google more
  on the problem.

  After a certain
  some research on Toshiba forum and Googling I came across
  a thread that sayd I must first install the utility 'control '.
  and the button press. Unfortunately what it did not work.

  Then, all of a sudden
  Windows displays a message saying that I should install the TOSHIBA.
  "ACPI-based value-added general use and logical device driver.
  I clicked on the provided download link, and the VFR package was a newer version
  version of the support page for my laptop which is held. So I downloaded
  This PPV version 1.17 and installed it. After a reboot, the buttons
  still did not work. But at least I got the file HWSetup.exe, where I
  could turn the LED off. Look into the button holder utility, I have
  saw that there where buttons like "Toshiba Assist" which my
  the laptop model is not.

  Navigation
  through the toshiba forum I found a file named ButtonSettings.ini, in
  which I can manually configure special keys. After a google
  search on the name of the file, I found that all the buttons list
  in a registry key. I saw the "Dimmer" file using the button
  folder and clicked on it. Poof... lights went out. Click again,
  Poof... lights turn it back on. So I replaced the wrong button definitions
  with CDDVD and dimmer values. Saved my changes but is not a restart.
  Opens the support button utility and change the path of
  MediaPlayer (who was always there to a previous definition) to
  Dimmer.exe. checked to see if the button CDDVD pointed
  MediaPlayer and restarted. When everything has been started, I pushed on the
  button again and presto... MUTE lights off. Pushed again, poof...
  lights. Pressed the mediaplayer button and started to mediaplyer. I have
  has been very happy when everything worked.
  Now that you
  know the story, here's the fix.

  * Difficulty: *.
  * Download and install the new VAP from here: [http://cdgenp01.csd.toshiba.com/content/support/downloads/util_tvap_26084A.exe]
  * Choose Edit in the installation and make sure that everything is checked
  * do NOT restart after the installation.
  * Download the ini fix and the fixed registry
  * Uncompress its contents into your working folder.
  * Copy the ini into C:\Program Files\TOSHIBA\TBS (where C: is the drive of program files)
  * In this same folder, start the exe called TBSbtnSt.exe
  * do NOT restart, click on 'no' in the dialog box.
  * Double click on the registry key, and then click 'Yes' to add to the registry
  * Then open the button support utility by clicking Start-> Toshiba-> utilities-> Toshiba assist. Help go to optimilization and click support button tohiba
  * If the path or the description is disabled, fix, and then click Save. See also if the CD/DVD mediaplayer points.
  * Restart you computer now.
  * If everything is is well past your special buttons should work.

  * WARNING: *.

  It worked for
  me, with my Toshiba Satellite P300-h-13, edition windows Home premium 32-bit.
  It should work on any model of 6 buttons with the mediaplayer and the mute
  buttons. I am in no way responsible for any damage that may arise
  If the fix does not work correctly. There is absolutely no. GARUENTEE
  It will work for you. If the answer is Yes, he does, and if it's not it
  doesn't work.

  * Author: *.

  I came
  With this fix by myself, without any help from toshiba support. I am
  the original author of this text. This document is for information
  purposes and should not be modified in any way.

  This page is
  also hosted on my Web site for documentation purposes. I have
  contacted toshiba support on my support ticket and has asked to
  Cancel and read this. I have also explained in the world.

  Wow, that's really cool! I think that a lot of users here would appreciate this extraordinary well documented fix.

  Thanks dude. :)

  Welcome them

• Problems with my satellite P300 - 15 ° C to start after the upgrade to windows7

  After that I installed windows 7 on my laptop Toshiba Satellite P300 - 15 c every time I start my laptop it gives me an error until I get home the log on screen with my user account.

  He says the following:

  Microsoft C++ Runtime Library

  This application has requested the execution in an unusual way.
  For more information, contact the application support team.

  I can press OK or closing 'X' top right of the window. When I push one of these buttons several times (any one it seems) my phone enters the login screen correctly.

  However, naturally I'm not really satisfied with this condition to my laptop. Advice how can I solve this problem?

  Thanks in advance,

  Heuts

  Work for an answer please.

• Games on Vista - Satellite P300 problems

  Hey.

  I just bought a Toshiba Satellite P300-1This comes with Vista Home Premium. The problem is that I can't run any game on it. I tried NFS Most Wanted, Battlefield 2 and Titan Quest(theoretically I should have no problems with my configuration-processor P8400, video Ati 3650, drivers up to date).

  When I try to launch the game, I get a black screen and the computer crashes, I need to restart. Any ideas?

  Have you installed SP1 for Vista and all the other patches?

  Are you sure that the drivers up to date? Check this on the Toshiba site and you must use the graphics driver Toshiba because they have protection against overheating.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Do you have an antivirus program? Try turning it off while you play games.