Re: Satellite Pro A300 - recovery disk will reinstall Windows OS on the new HARD drive

Similar Questions

• How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  * Original title: windows 7 download

  I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  It has probably comes with Windows 7 Professional 64 bit.

  You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  You can also use Windows 10 too as you have the right to it as a free upgrade:

  • How to download official Windows 10 ISO files
  • How to: perform a clean installation of Windows 10
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Install Windows 7 on the new hard drive with USB operating system recovery?

  I have an Alienware 2015 15 which does not come with a CD player. I install a new hard drive (SSD 2280 m2), so the question is how to install WIndows 7.

  While Microsoft offers an OS IOS for WIndows 8 download that you can put on a USB (with dell, I think that it automatically pulls the product key of BONE off the coast of the motherboard?) this IOS download is not available for Windows 7.

  So the question is the recovery USB OS offered by dell will allow me to do a fresh install of Windows 7 on a new hard drive in the laptop even USB from recovery of the BONES came with. My last resort is to buy a new copy of windows 7 and a USB external CD/DVD drive.

  TLDR: OS Recovery USB offered by dell will install Windows 7 on a new hard drive.

  The factory restore USB will work on another drive. I did this procedure with the media created from the latest version of Dell backup and restore on my Inspiron 13 7347 and demonstrated the creation of media and installation on a new SSD:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

  Since you are using use Alienware Alienware Respawn. Alienware respawn is very similar to Dell backup and restore.

• I'm reinstalling 11 items on the new hard drive on my machine. I got reg no product of the registry on the old drive but when try to install it says it's the wrong serial number. What I am doing wrong?

  I'm reinstalling 11 items on the new hard drive on my machine. I got reg no product of the registry on the old drive but when try to install it says it's the wrong serial number. What I am doing wrong?

  Hi Phill,

  Please see the links below.

  • Invalid serial number error
  • Error "serial number is not valid for this product". Creative Suite

  Hope this will help you.

  Kind regards

  Hervé Khare

• Hard disk failed to keep windows 7 for the new hard drive or SSD

  Hi, windows told me recently there is a problem with my hard drive and that I would back up my data to an external storage device, in case it fails, but don't want to backup my files because they aren't important. When I tried to access file Explorer the next day I got the warning my computer froze. I'm not him have not restarted the laptop since then in fear that it could make it more worn, since I may still need it.

  I try to order a new hard drive or SSD and won't buy windows 10 because it's expensive. Instead, I want to keep my current operating system, which is windows 7 Home premium, which is preinstalled on my laptop.  I have no recovery disks and I didn't do all the backups at all, but here is a windows 7 product key stuck on the back of the laptop.

  I was wondering if I can use the product key to install windows 7 on the new HDD/SSD and if yes, how, I would go to this topic. Also, if I can't do the wrench is it another way (because I may be able to use it yet), because I don't want to have to buy any other OS.

  Specifications:

  Laptop: TOSHIBA Satellite A660

  OS: Windows 7 Home Premium

  (Let me know if you need more details)

  Thanks for any help.

  If you are still able to boot from the Windows 7 Desktop on the current hard drive, try to create a set of recovery disks. See the instructions in the following article:

  https://NeoSmart.NET/wiki/Toshiba-Recovery-disk/#Create_disc_for_Windows_7

  After you create the defined recovery disc, close, install the new SSD, then use the updated recovery disk to reinstall Windows 7 on new disk SSD.

  You will need 4 blank DVDs.

• Reinstalling Windows 7 on a new hard drive

  I can't find an answer to this question anywhere.

  I own a Sony Vaio VPCL116FX running Windows 7. A few days before, without warning, a window opens, informing me that the failure of the hard drive was imminent and do a disk backup and restore immediately, so I saved all on an external hard drive. OS as Windows Image Backup. So I bought a new hard drive, installed and am ready to reinstall all my work on the new hard drive. I went into the bios and boot priority changed external hard drive, but not joy. It shouldn't be so difficult that it is becoming.

  Because the computer is delivered with no recovery disc, the outside is all I have to work with. Sony there is no help, Vaio has been sold, and the only suggestion I can get from Microsoft is to contact one of the two manufacturers above.

  Is there something I need to do other than the steps that I already tried to engage?

  Thank you.

  You can do a system repair disk on any computer as long as it has the same number of bits as yours (32 or 64) and Win7

  You will need to a blank recordable CD or DVD.  Start, all programs, Maintenance

  It takes 5 minutes

  Now start your computer with this disk and you will find your way to restore from an image.

• Impossible to reinstall Windows 7 on a new hard drive

  First off apologies if this has been answered recently, I spent the 2 days on this problem and the promise that I searched and google til my fingers bleed. Basically, the situation is as follows:

  -The PC tells me HDD is faulty on my Studio XPS 8000

  -J' I buy the new HDD, then get out of the old and install new

  -Position the disc of the PC operating system, get up to where I can click on install to start the installation of Windows 7 on the new drive

  -However he says there is no device driver on the disk, I put in the drivers and Utilities disc, (which came with the PC) but still no driver of the device, even if it says disk they appear thereon

  -Back to the old drive and try to make the system recovery disk - try to use USB flash drive but is not recognized, so buy dvdr discs and go through initialization and then it begins to collect files, but on many tests is not go beyond 25% full, let alone engraving on the startup disk.

  -Dell Datasafe Local Backup to uninstall and reinstall but the continuous PC to freeze at "25% collection files.

  So, what can I do, because my warranty is over? All I have to do is install my copy already purchased WIndows 7 on my new hard drive already bought, but I'm stumped at this point. Thanks for any help of cutting-edge :)

  Oh... PS. -I am in England so I don't think I can send away from the backup disks, even if the expiry of the guarantee is not a problem.

  Follow the Windows reinstallation Guide / A clean installation of Windows 7:

  http://dellwindowsreinstallationguide.com/

  The part you get stuck on is step 6, preparation of step 8 and SATA drivers loaded during the installation of Windows.

  Note that I recommend using a .iso of Digital River, which will be the installation of more up-to-date media and the use of Activation and recovery of backup for the activation of the product. Follow the step 2 (using the files at the bottom) and stage 11 b for activation of the product. It is an unofficial solution but works very well.

  You can of course try to call Support technique Dell and request a Dell Windows 7 with Service Pack 1 DVD of resettlement.

• I need to reinstall Windows Vista on a NEW hard drive

  I need to upgrade my hard drive a 500 GB to a 2 TB hard drive. I want to keep the old hard drive as what without having to format. I'll put it on in the case where I never need to access the data that's out there. I have the key Windows Vista Home Basic 32-bit disk and license. Is it possible to just install it on the hard drive again without any license validation error or the old hard drive must be formatted to remove windows. Desktop PC. Thank you

  Hello

  Legally, you must save your data > wipe this most hard > re - install your data, and then use this drive hard as you would normally use an external hard drive. namely for data only.

  One license is for a single installation.

  _______________________________________

  You can have activation issues with the new hard drive and reinstall anyway.

  If you do, then use phone Activation > do not follow Auto prompt > but brace yourself for a real person explain to the.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Re: Satellite Pro A300 - DVD drawer will not open most of the time

  I have a portable Satellite Pro A300-1NH. The DVD drawer opens not most of the time. Sometimes it does, but most of the time it isn't.
  Sometimes, if I can get a DVD/CD in the drawer for something to burn, burning works.
  Most of the time the computer does not recognize that there is a disc, and then I can't open the drawer again to get it out.

  Can anyone tell a novice what should I do to resolve this issue please?

  It looks like a mechanical problem. You need to replace or insert a PIN or no folded into a small hole on the plateau near the exit button whenever he is stuck.

• No boot disk found during the installation of windows 7 in the new hard drive by using the original recovery disk

  Hello

  My laptop is HP - Pavilion dv6 2165-tx. My old hard drive damaged and so bought a new one.

  New hard drive works fine. (He went from main hard drive test)

  Now, to install the operating system, when I insert the recovery disc in my CD, I get the error message-"no boot device press a key after the insterting startup disk."

  How can I go about this now?

  Thank you for your contributions.

  I've installed windows 7 using my recovery disk. Problem is that my objective optical drive was not clean, which resulted in the error.

• Satellite Pro M45 overheating after a few updates and installation of new HARD drive

  I have a sat pro p4 overheated now. I tried the old hoover and this does not work. The thing is that both fans do not seem to turn on. All this happened after I downloaded some updates to put on a new hard drive, I bought.

  Now the fans are not at all turns. My m/b is actually a model of the A45 and I put a 2.0/128/400 CPU inside. The old man who was in it is a 2.4./512/533

  It seems that you have changed almost everything on the laptop.
  Motherboard, CPU, HARD drive, etc.

  Believe me; It s not easy to say why fans don t start. How everyone should exactly known what you did on your laptop?
  Maybe the card mother doesn t provide the power for the fan or the connection is failing.
  Are you sure that the motherboard is ok?

  Unfortunately, all we can do is to hear from you.
  But usually some diagnostic tests are needed to locate the fault.

• Satellite L300 - how to reinstall Windows Vista on the replacement HARD drive

  Hello

  My HARD drive has stopped working on my PSLB9E. He started making whirring noises and wouldn't start. all tests show it does not. Now I guess I need a replacement for HARD drive and watched a TOSH MK2565GSX or other similar. Problem is I can't find my Windows key anywhere.

  It is can get the key to Toshiba/Microsoft giving them all my contact information or do I have to buty a new HARD drive and install a copy newly purchased Windows on? If Yes, then I'll put W7 on I guess.

  Thanks in advance for any help I receive!

  SB

  > Problem is that I can't find my Windows key anywhere.
  The preinstalled Windows operating system and the image that is placed on the Toshiba recovery disc were already activated and therefore the serial key is not necessary.
  If you don t have the recovery disc, so you can buy this drive here:
  http://backupmedia.Toshiba.EU/landing.aspx

  It s not expensive; 30 euros I guess.

• Errors in the world when you try to reinstall Windows XP on a new hard drive.

  Original title: errors everywhere!

  Hi all:

  I recently bought a new hard drive (seagate momentus xt) for my older PC toshiba M70 laptop. I tried to re - install Win XP on the recovery disk (which came with the laptop) but I got a black screen with cursor. I repeated the collection, same thing. To check that all was well with the disc, I scanned and then installed ubuntu 9.04 it work perfect! What is interesting is that in the prior installation, he showed that win xp has been installed on the disk. Then I tried to re - install win xp - then I got this error Grub 17... I went back with the facilities and now I'm at a point where I get a message "error: unknown filesystem grub rescue >" (after the installation of ubuntu 11.04, then windows again). I don't know what to do. What I want is my xp back, I can't get ubuntu. Help, please.
  Thanks in advance.

  Hi ARolle,

  ·         It is reinstall drive?

  Method 1: Load default BIOS (Basic Input\Output System) settings, and then restart the computer. Make sure that you have the CD drive set as first boot device. Check the settings by consulting the manual or call the manufacturer to do so.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 2: Try to boot from the CD and see if you can start the installation.

  Contact Toshiba to get more information on the type of disc you use to reinstall Windows.

• Received error 0xC004F063 after reinstalling Windows 7 on a new hard drive for laptop even. Help

  I have connected my pc today and noticed that my activation stated that my product key is not valid after several months of use!  I always been updated on system updates and activated the pc after reinstalling windows 7 ultimate on a new hard drive.  I receive the error 0xC004F063 of the activation process.  This indicates that the BIOS is missing a required license.  I contacted Microsoft by phone and by the representative of the India was not attentive and no help at all!

  All I want is my key is valid again so that I can continue on with the help of my pc normally.  Help, please!  I have a genuine Windows 7 Ultimate key and it has been installed on a new SSD for the same computer laptop that I use the key.

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• try to reinstall windows xp on a new hard drive

  My dell desktop internal hard drive crashed completely, so I can't start over. I am running windows XP (and I have the product key) that has been installed by dell, when I bought it. I have all the original disks. I intend to buy a new internal hard drive and re - install windows XP. How can I do that when I have everything I have is a product key? I made a backup of the hard drive on an external hard drive, but I don't think that I can boot from the external drive. I have no backup discs.

  The best solution is to contact Dell and get a recovery disk. Otherwise will need you:

  1. buy a full copy of XP and install using the product key that follows; or

  2 remove your computer to a competent local professional, who will have the right Dell XP disc to reinstall Windows. MS - MVP - Elephant Boy computers - don't panic!