Re: Satellite Pro C660 - how to do the recovery with command prompt disc?
I have a brand new Pro C660 of Satellite. It worked fine for a day, now it will not load windows. I don't have to create the recovery disks, as I only had a few hours (Yes, Yes, I know, should have been the first thing I did). All data are present (but backed up just in case USB) and I can see the folder HDDREcovery with all data intact. However, I can't run the application to create recovery discs. Does anyone know how to extract the images and create the media using only the command line? (I can go into command prompt by booting from the Windows 7 disc a friend). All options fail own laptop startup disks. It says 'Windows does not load' and I try startup repair, but it detects no error. Any help/thoughts on this will be greatly appreciated!
It of not possible to create the drive with command prompt recovery. You must use the Windows Toshiba Recovery Media Creator.
Now it s too late for you, but you can order a disc here:
I had a Satellite Pro C660.
I would like to know where the plug for connecting the internal modem to send a FAX
> I would like to know where the plug for connecting the internal modem to send a FAX
As much as I know the C660 does not support an internal modem
I just bought a Satellite Pro A300 with Windows XP.
I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
The information gives instuctions on how to proceed for the Vista machines, but not for XP.
I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?
Any help appreciated,
You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?
Please check this box.
Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.
But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.
Have you checked all of the items in the box?
I had one on and out of the question with my touchpad at least a few months now. I tried to do the function + F9 thing with little effect. Also, I re-uploaded the synaptics driver, which seems to make it work for a little while but then it started working sporadically.
Currently my touchpad works from time to time, if it fails on the first pressing Ctrl Alt Del and then Esc seems to do the job for a little long but after that it just stops working. I am a student and not having is not a fully functional laptop is often a major obstacle if any help would be great.
My first question is: When did you notice this problem from touchpad.
I mean, the Sat Pro C660 is a portable old and if this issue seemed to be in the first day of purchase, then something touched the touchpad feature in the past.
The question is: is at - it something wrong with the software or touchpad maybe module.
I think that can be answered only the settings of the notebook back to factory State.
If you are recovering the using laptop computer Toshiba recover disk, you will get exactly the same State as at the first day of the purchase.
If the touchpad would not always work properly, well there is some hardware problem
I have a Satellite A60 and my utils / driver disk is not in use.
Is there anywhere I can download or there at - it somewhere that I can buy one?
Especially the "FN" shortcut key will not work. I tried to download the utilities from the page drivers but its defo not to play ball.
Any help on that would be great.
I found a new page of Toshiba.
It s an online store of Media Backup of Toshiba Europe and you should be able to order your CD of restoration on this page.
_Regarding your FN order issue: _
If you are using Win XP on your laptop, you must install the Hotkey utilities for display devices and Hotkey Utility get the FN buttons work.
One thing is very important; If you install your operating system manually, please ensure you install drivers for Toshiba and utility in the right order. On the Toshiba driver page, you can find the installation instruction txt file and you would find the mentioned order insall. Follow this all in the driver installation procedure!
Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
in this case it would be interesting what Type of laptop it is exactly.
You will find this model on the bottom of your laptop. There is a review of it.
Some models have a Bios update available, others not, for example.
Please send additional information!
I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.
The laptop is running Windows 7 64 bit
What card WLAN have you had before and do the work of a former?
I think that it of difficult to say why it doesn t work but maybe this card is not compatible.
By the way: do other FN keys FN + F8 work or simply not?
Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.
But now, he's just on stand by.
How can I get this back to how it was (having to press the button to exit stnd - in)-help!
I tried to turn off Toshiba power saver and using the windows settings but nothing
I have treid working :(
Can anyone help?
I get at the end of my home with this computer laptop blinkin :(
I work with the old Satellite Pro 440. I have a problem with reinstalling Windows 98.
I don't have a CD of the device and the FDD. But I have installed MS-DOS 6.22 on the HARD drive and folder with Win98.
When I start to appear then receipt message on screen: "ATTENTION: a serious error occurred when writing on drive c. Retry (r)? Checked HARD drive on another PC and errors was not recognized. HDD (Toshiba MK6015) had divided to two parts: C - FAT 1024Mo, D - FAT32 rest.
Please help me.
How did you check the HARD drive? What tests did you use?
I have good experiences with the Drive Fitness Test (freeware).
This error is strange, but I think the best way would be if you format your drive and copy the files to the HARD drive.
Maybe this might help you.
Can you help me?
My English is bad I do not end.
The question is:
My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.
I want to know what's wrong
Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
Her check first because otherwise, you can get the WLAN to work.
In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
After this Free Config should find your WLAN router if you are in the range of that.
I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.
Any suggestion? Thank you!
I think that in this case, you can use a network switch.
I got my laptop via my uni so did amyn backup discs (especially not the webcam).
Basically my laptop is a Trojan virus on my webcam, set it and I restarted my computer. It is then flashed up on reboot that I need to install my webcam but I don't have the disk and now I can't use my webcam! What should I do?
PS I'm not a genius with computers so please be easy on me with the language.
If you need to reinstall the driver for the webcam you can download on the Toshiba site and all drivers for your laptop:
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
I have too many Satellite Pro A300 and it s not delivered with the Toshiba Recovery disk because you create such a floppy yourself. So start the Toshiba recovery disc creator, which is preinstalled on your laptop and you can create this disk. It contains a picture of the factory settings, and so you can restore the entire system every time.
I got Toshiba Satellite A100 PSAA8C - SK800C NOTEBOOK. I had lost the product Recovery DVD-ROM of this model. I had smoker
Save the product recovery dvd. Can U tell me how I should get the product Recovery DVD - ROM with XP Service pack 2 operating system.
I m not very good if you want to be able to order the recovery for this unit disc, because in very rare cases, the recovery disc may be pronounced if the laptop model is too old.
So I hope that you can order it here:
You can also try to contact the ASP in your country and ask the guy if he could order the Toshiba disk directly
I bought a toshiba Satellite A300 - 15 d
FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.
What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?
Thanks in advance
Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
You can get a new drive to an authorized service provider.
But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)
I have a laptop Toshiba Satellite Pro S300-11 years and have a problem. One day, I decided that wanted to put a password for the supervisor to the bios of the laptop. Now, I remember this password, but when I have access to the BIOS Setup, I can't watch any o change option disable this password. I can't enter this password to set me a supervisor, and also I can't change some options with respect to the example, the boot sequence.
How can I remove this password or how do I log in as a supervisor? I see no option for this, and I need to change the boot sequence.
A big thank you.
On this that I can only say, check your user manual! ;)
There, I created the following information:
+ C:\Program Files\Toshiba\PassowrdUtility\TOSPU.exe+
+ This utility allows you to do the following: +.
+ Register, remove, or change the supervisor password.
+ Create or cancel a supervisor password token +.
Check this and then you should be able to remove the password if you know the current.
Maybe you are looking for
Hello, please help me understand what is happening with my IPhoto program - I open and after 1-2 seconds, it crashes and closes... tried several times, also with restart my Mac - same thing: Please HELP! I don't want to LOOSE MY PHOTO))) ____________
My new printer prints very well. But when I try to scan or copy, the pagae is filled with white and the vertical lines of color. Any thoughts?
Lords Of Magic by Jasc loads without problem and works without a problem.The problem is that the Lords of magic before it is patched is almost unplayable and massively buggy. Here's the glitch. When I try and patch the game, the system tells me I nee
I have the option in windows live calendar, but not in windows mail 2011.
After you start the system and windows from (varies from 20 to 60 seconds), the mouse and keyboard lock on the screen. In fact, the mice moves but will not interact with anything. I have not installed new programs or hardware recently. They both s