Re: Satellite Pro L300 PSLB9E - Win XP WLan need driver

Similar Questions

• Driver XP SATA for Satellite Pro L300 PSLB9E

  Hi all I have a Toshiba Satellite Pro L300 PSLB9E and I am trying to downgrade from Vista to XP. I have the sata AHCI controller mode, I looked for this drivers on the toshiba site and the site of intel, but none of these work when installing xp and pressing f6 when you use a usb floppy drive. Any ideas?

  Hello

  If you have set the compatible SATA mode in the BIOS, then you n t need to install all the drivers SATA!
  Compatibility mode allows you to run the HARD drive without SATA drivers.

  But if you want to use the HDD in SATA mode, then you will set back to AHCI.
  In this case the SATA drivers must be installed in order to use the HDD in SATA mode.

  The laptop seems to be equipped with the AMD CPU and so you need a SATA chipset AMD driver. That are in the package of graphics (record SBDrv/SATA") driver

  Welcome them

• SATA for Satellite Pro L300 PSLB9E

  Hello

  After reading almost all threads talking about it, I know that I need a driver for my chipset, but Satellite PRO L300 PSLB9E what controller use exactly?
  How can I see what it or could someone tell me?

  For example, I have this list.
  Which one should I install? Where can I find it?

  http://img408.imageshack.us/img408/4671/sata2um9.jpg

  Lot of thanks and sorry for the mistakes, I am not very strong in English

  You need to install the SATA drivers before you install Windows. If you have two options:

  1 copy the drivers on a floppy disk. After that, you start from the Windows CD and press F6 to load drivers.

  2 do. you a new installation with nLite disc. Search forum, there is a lot of discussion on this topic.

  If you have problems to do this, ask here in the forum. ;)

• Satellite Pro L300 shows ACPI ATK0100 Kernel Mode Driver error

  I have a Satellite Pro L300 with Windows Vista and it has been fickle to say the least, making me restart the system several times.
  The last two times she since continued to come up with an error message saying "cannot open ACPI ATK0100 Kernel Mode Driver", and I understand that it is perhaps what is originally that there problems later.

  I tried updating the BIOS, reinstall the drivers and, seeking answers and, of course, reinstall the whole system, but I still get this message every time I turn on my laptop and I really don't want that it gives me the blue screen of death again - please help me!

  Thank you.

  Stand by.

  You ve done clean install of Vista with initial recovery DVDs and you get this error in any case (no additional software is installed)?

• Satellite Pro L300: x 3100 and updated updated driver chipset Intel 965 graphics

  Has anyone installed the Intel 7.15.10.1666 driver, dated 02/26/2009 for the Mobile 965 chipset? Here is their web page to download:

  http://www.Intel.com/support/graphics/intelgm965/

  Toshiba Satellite Pro L300 doesn't work for some reason unknown to me, with the automatic update driver Intel (download containing the executable file). Therefore, I followed the instructions for manual installation (the download with the zip file).

  My laptop works fine with this new driver, and there is a clear improvement in the transitions between images when you use the option to Windows presentation (slideshow).

  This new driver installs also 3 Intel graphics programs:
  For the management of the display function keys
  Access to the system tray
  Wizard TV

  I used Windows Defender to remove these 3 programs that load automatically at startup of the system to maintain a fast startup time and not loading unnecessary programs in memory. There is no me no problem.

  Why Toshiba has added that this to the driver download page?

  Hello

  Thanks for this second info...

  > Why Toshiba has added that this to the driver download page?
  Who knows maybe it has not been verified, approved and tested by Toshiba?

  As far as I know every phone manufacturers test and approve drivers before they will be released in the pages of pilot
  Perhaps, it has not been approved...

  However, it s good new that this driver works correctly.
  I'll check it too on my laptop.

  See you soon

• Satellite Pro L300-software-service says I need update graphic driver

  I downloaded the software http://designbyme.lego.com/en-us/default.aspx DesignByMe

  The installation runs without a problem, but when I start the program it restarts again and again. The charge of doesn´t photo entirely, instead of this there are black spots. I have can´t click on anything that either, or near programm. I thought that maybe the installation process has not completed correctly so I downloaded the software again, but the problem is always the same. I m using a new Satellite Pro L300 28w with Windows 7 and Mozilla Firefox 3.6

  I contacted the support of lego and they replied: "probably you need to update your graphics driver. Please contact your customer computer manufacturers website for updated free"

  Is this possible and if so what edo upgrad I need?

  Hello

  I put t know if the update of your display driver can solve this problem, but if the manufacture of the software said that it s worth a try! ;)

  The update is simple enough: first download the latest version here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you have downloaded the latest version, remove the old first. Check the list of software in the control panel and follow the instructions on the screen. I guess you have to do a reboot and after that, you can install the downloaded version.

  Good luck! :)

• Satellite Pro L300 (PSLB9E) - need to wireless network drivers for Server 2003

  Hi all

  I put the Server 2003 on my new laptop for a University project. I got everything to work except for the wireless. I've tired the latest drivers from the support site for that laptop, but they did not work.

  Does anyone know if there are any drivers for my wireless card so that it will work on Server 2003? Or how can I know exactly what I have in the machine I said it the wireless card may not be an Intel card could be an Atheros card?

  Thank you

  Hello Jack

  Server 2003 is not supported on Toshiba laptops and you must try to find somewhere on the net.
  According to the specification of your Satellite Pro notebook has REALTEK 802.11(B/G) 13CH-RTL8187B WLAN card.

• Satellite Pro L300 - PSLB9E - cannot turn off wifi except for by Win 7

  I installed Win7 64 bit with a custom installation (replacing 32-bit Vista). I have updated all drivers (to my knowledge) and BIOS to 2.1. The wifi is always enabled, any position of the switch on the front or the combination Fn + F8. I can unplug a wifi service in the network Panel Win 7. This may seem like a good problem to have, but the power gets used when on battery. Obvious pointers? I can't follow up? Thank you very much.

  You can likely install toshiba value added package for win 7 if it is available.
  I also have the same problem with mij L40 pro and value pack for Windows 7 will not install on my laptop.
  Maybe it wil last updated in the future.

• Satellite Pro L300 PSLB9E: 100Mbit instead of connecting to the network local 1000Mbit WinXP

  Downgraded to WinXP.
  Have downloaded all the drivers available from Toshiba support, but still cannot get the speed of 100Mbit connection. I guess it's an another downgrade of the bios needed to support the XP operating system?

  Hello

  Your laptop supports Ethernet 10/100 Base-TX.
  This means that the network card supports the standard of 10 Mbps and 100 Mbps.

  I put t know why you expect at a higher speed, but the 100 Mbps is the maximum value for this chip to Base - TX LAN Realtek 10/100

  Welcome them

• Satellite Pro L300-152: deleted folder - but need Recovery DVD reocvery

  Hi, I recently bought a toshiba laptop *.

  I accidentally deleted the file on my disk 'data' through formatting the drive.
  I was told that I needed this folder in the hard drive to create my recovery disk

  This file is now gone.
  Is it possible that I can always CREATE the disc or the folder to DOWNLOAD/PURCHASE to use for the recovery process to create the disc?
  Without having to pay for a new disk - [which costs around £30!

  Please try to help because I'm stuck here...

  Thank you

  Bad news buddy.
  Without the recovery folder, you will not be able to create the Toshiba recovery disc.
  Unfortunately, but it looks like you will have to order the recovery DVDs.

  Formatting HARD drive was a bad move :(

• Satellite L300D-12 t - Windows XP WLAN need driver

  Hello!

  I have a Toshiba Satellite L300D-12 t PSLC0E. I had update the hard drive, installed Windows XP and now I have problems with some drivers. Let's start with the WLAN driver. No download on the Toshiba site, realtek drivers Don t work.

  Someone an idea?
  Thank you very much!

  Christoph

  > No download on the Toshiba site
  According to specification for laptop, your laptop computer has Realtek Wireless LAN Adapter 8187 B and it is certainly available on Toshiba WLAN Portal under http://aps2.toshiba-tro.de/wlan/?page=downloads

  > realtek drivers Don t work
  Does that mean exactly? You have some problems to install or wireless network card correctly (listed in the Device Manager) but you cannot use it for the WIFI connection?

• Satellite M50D-A-10W - Windows 7 WLan need driver

  Can you help me please on how to install the driver for this model wireless on windows 7?

  Thank you!

  Unfortunately your laptop is not supported for Win7, and the driver is not available for download.
  I think that your model of laptop has Atheros WLAN card. Am I right about that?

  I found another model of laptop that should have the same WLAN card but it is supported for Win7 64 bit.
  You can download the driver from here.

  Test it please and post comments.

• Satellite Pro L300 - wireless network adapter issues

  Hi guys

  Im having problems with the wireless connection, he sees its network but wont connect.issues with access point or adaptor.i tried everything and still no joy.

  im hoping some cheering helps

  Satellite Pro L300

  Win 64

  You can connect your laptop to the router using the LAN cable?

  Try restarting your router. Disconnect password and check if the WIFI connection working.
  Also, check the router and WLAN card settings. Don't forget that both devices use the same WLAN mode.

  

• Satellite Pro L300 - USB card reader does not support the 64 GB

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Posted by Trees
  

  HI I have a Satellite Pro L300 under Win XP that I want to attach a USB card reader. I find that I can not read the 64 GB cards. The error is that the card is not formatted. All other cards read correctly. I can place this card reader in my desktop running Win 10 and it works correctly and reads the 64 GB cards. This seems to indicate that the USB card reader works properly, and perhaps that the problem lies in the USB on the Toshiba drivers. Has anyone else had this problem and found a fix for this. I've just updated the BIOS but no improvement. Thank you

  Hi, here is a link to not detected by the PC card reader:
  http://KB.SanDisk.com/app/answers/de...CTED-by-the-PC
  You can take a look, hope it will be useful to you.

• Satellite Pro L300 - XP runs slowly

  Satellite Pro L300 PSLB9E - Windows XP
  Works slow intermittently, but shows inactive in the Task Manager. Disable anti virus etc, but always slowly works intermittently.

  Can anyone offer advice please?

  Hey mate,

  First I must say that it is really hard to say why your laptop is running slowly. There are several reasons for this problem, but it would be interesting to know if you have installed the operating system preinstalled by Toshiba or did you install XP yourself using a disc of Microsoft? In this case, you should try this again with the Toshiba recovery disc. It contains a picture of the factory settings and so, your laptop should work correctly.

  In addition, I would recommend to defragment the HARD disk, disable some services and startup programs that you don't need and you try a good antivirus like AntiVir. After that, clean you the registry with CCleaner.

  Good luck!