Re: Satellite Pro L300 - unable to get into the BIOS or boot

Similar Questions

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?

• Re: Satellite Pro L300 - how can I reset the BIOS password?

  I put the password on the BIOS and electric start and I forgot the password.
  How can I reset the password?

  I have a Toshiba Satellite Pro L300.

  You must bring the laptop to an authorized service center to remove the password.

  Which country are you? Check your local Toshiba Web site for a list of the ASP (service centres).

• U940-11N SATELLITE - cannot get into the BIOS or Boot Menu

  Hello

  I am currently in the processing you want to perform an update of the operating system on my laptop. When I bought the laptop in a well known department store, it came loaded with Windows 7, despite the operating system preloaded in Windows 8 when buying.

  I already disabled fast closing down, such as recommended elsewhere on the forum. However, after the closure of many downs and startups, based on all kinds of combination of keys to try to get the menu of boot or bios, I can't do it. It starts directly to Windows.

  I tried to boot from an aswell as a bootable USB external DVD drive.

  I tried F2, F12, F10, ESC and DEL at the start, but nothing. With pressure repeated, with continuous waiting, with the FN button, just in case... just nothing!

  Could someone provide an overview of this please?

  Kind regards
  Jamie

  Thanks for the feedback jamieb!

  Good news!

• Satellite L750-1NG - impossible to get into the BIOS

  Hello team,

  I've recently updated my Toshiba BIOS of v3.0 to v3.6 and I am not currently able to access BIOS. I don't see a splash or the other screen. Except that my computer works very well. I have a Satellite L750-1NG and running Windows 7.

  Thanks in advance for you help. :)

  Post edited by: welika

  Hello

  Have you tried to press F2, immediately after the laptop was turned on?
  Press F2 repeatedly in the line.

  Otherwise I recommend starting the utility HWSetup from Toshiba. (All programs-> Toshiba-> Utilities-> HWsetup)
  Here you can change some settings of the BIOS like him setting the Standard (default).
  I think you'll need spend the quick start the normal start because you said that you can not see the Toshiba start screen.

• Satellite 4090XCDT - no chance to get into the Bios

  My Satellite 4090XCDT I have no chance to enter the BIOS.
  Press ESC and turn the unit on does not work. Only the bootlogo "in touch tomorrow toshiba" is displayed.

  Only the F12 key to work, where I can update the bios.
  I did this (version 8.20) and the update of the Bios correctly completed.
  Still, I can't enter the Bios.

  Sew the CMOS or RTC battery would?

  Hello

  Have you tried to press the F2 key too?
  I don't know if this laptop supports a Toshiba or the BIOS Phoenix m.
  If it s a Toshiba BIOS, you must press ESC and F1 to access the BIOS. If it s a Phoenix BIOS you should try the F2 key immediately after starting mobile phone

• Satellite Pro L300 PSLB1E - can I use the Bios for PSLB9E update

  Hi guys

  IM wondering if I can Flash my computer model toshiba laptop as in description with the following bios version

  PSLB9E Bios Version 2.20

  that is my current version

  PSLB1E Bios Version 1.50

  the question is - what the hardware is the same I'm sure that

  but will it work ok with this bios version?

  Thanks for any help

  Hello

  The question is: why you want to update the BIOS?
  Is there something wrong?

  As you know, the BIOS update is a sensitive technique.
  My laptop works with old BIOS and I did not upgrade to update even if the new version has been released I didn't update because my camera is ok.

  However, it seems that the two series are similar, but I think there are still some minor differences besides the BIOS update should not continues if the wrong version would be selected

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• Pavilion P6-2378: Cannot get into the BIOS

  I've recently updated my BIOS to v8.19 on my motherboard of Jasmine using service pack SP67068 after seeing a security warning on my original BIOS on the HP driver update site.  After the update, I am unable to enter the BIOS and more!  I see more startup or other screen.  Here's what I've done so far:

  (1) I entered "bcdedit/set {default} bootmenupolicy legacy" (and standard).  No splash screen.

  (2) I momentarily pressed and also pressed the ESC key during several start ups.  No splash screen.  When I press ESC after turning, the drive just stops.  To continue, I have to press Ctrl-Alt-Del to continue, and it starts Windows normally without a splash screen.

  (3) I went to change the settings of pc and navigated at startup in the UEFI Bios, but after the restart, but the computer crashes just until I press Ctrl-Alt-Del, then it boots normally into windows 8.0, but without the boot (legacy or HP splash) screen.

  (4) I opened the discount to zero the BIOS jumper and removed the battery for 5 minutes, several times.  No splash screen and press ESC or F10 after that reboot causes hang until you press Ctrl-Alt-Delete.

  I wouldn't have updated the BIOS if it is not for the security warning, as it worked very well. Now, I can't get into bios no more.  Help, please.

  Hello!  Yes, your right, it's the graphics driver!  But I had already updated just before I had this problem, so I rolled back the driver and still had the problem.  But then I realized that my TV is connected to the computer when I upgraded and downgraded the graphics driver.  I've updated the driver with the TV disconnected and VOILA, I see the spash screens and am able to get into the BIOS.  The graphic resolution of boot has been masking splash screens.  THANK YOU for your help.  I am very grateful.

• Cannot get into the BIOS on my Sat A30

  Hi all

  I have problems to enter the BIOS. I heard when I want to get into the BIOS I have to press the ESC key when Toshiba logo is shown in the startup.

  But nothing happens!

  Could someone help me?

  Sammy23

  Hi Sammy23
  That is right. It's actually the ESC you press. But there is more to know. During the time where appears the Toshiba logo, that represents about 1.5 seconds or so machine "listens" for the ESC at the beginning.
  Means that you have to be quick like a cat to press ESC. I usually press ESC several times all the way to the market (until the Toshiba Logo is displayed). Try this. Another way to get into the BIOS uses Toshiba HWSetup (looks like a key any) in the in the Windows Control Panel. You can access almost all the parameters of the BIOS from there.

  BR

  Tom

• Portege 7200: Hot to get into the BIOS?

  Hello

  How is it possible to get into the BIOS in Portege 7200?

  Thank you!!

  Harry

  Hello

  I found the same info. Press the ESC key just after switching on the device.

• Cannot get into the BIOS on my Portege R700

  Hello friends,

  I have laptop Portege R700-1321.
  1 year a go, I was updating my version of BIOS to 2.20 and after that I have cannot get into the BIOS!
  try a passer-by but noway :(

  When you press F2 after you restart the computer nothing add and put it back again.
  try to change ro F10 boot order but still just restart :(
  I need to change the boot order to install the new OS fresh and of course my BIOS setting.

  Please help me.
  If any body had a same problem or know how to fix it :(

  First of all you n t need to change the boot order in the BIOS if you want to reinstall the new system.
  You can press F12 all turn on/off the unit.
  Then a menu should appear where you can change the boot device.

• Tecra8000 - keys to get into the BIOS?

  Hi all, I am German, sorry for my English!

  I have a tecra8000 with win2000, but I lost my password, I'll install windows xp home edition now, how can I get into the bios. Wich keys must I push wen the computer is in boot mode?

  Thank you

  Leo

  Hi Thomas,

  The normal to access the BIOS path will be to press ESC then F1 during startup. This will give you the BIOS menu. Some laptops use ESC to show the progress of the POST and F2 to enter the BIOS menu.

  F8 will allow you to start in safe mode.

  F12 to select boot device (disk, CD, etc.).

  HTH

• I can't get into the bios

  When I restart my laptop I have the HP logo with the small "leak of press to enter the boot menu. Usually, when I press ESC at this stage, it gives me options to go into the bios, change the boot order and enter the Recovery Manager.

  But earlier when I try to do it, by pressing esc it will start in the windows Boot Manager, giving me the boot options in windows or to do a test of memory and I don't see any option to get into the bios!

  Laptop model: HP Pavilion dv6 3030ee!

  OS: W7Ultimate Bit

  Please someone help me with this problem!

  Thank you

  Finally I solved it! I just took the battery and put it again! then my cell phone is ok

• T530: Cannot get into the bios

  Hello.

  The issue of this link does not seem to be solved with the last update of the BIOS (or it's a similar question).

  I'm running 2.04 and since I have set to UEFI boot only I can't get into the BIOS. When I press Enter to interrupt normal startup the screen goes black, it seems to interrupt the boot but nothing looms on the screen. Starting continues after a few seconds (I guess that after the time-out of the screen of the interruption).

  There seems to be a problem with the code modesetting, because if I connect to an external monitor to the VGA port everything works correctly.

  Note that what is happening with optimus, as well as with only the active Intel card.

  Thank you.

  This seems to be fixed with the last BIOS update (2.07).

  Although a little more comments would be welcome.

  Thank you.