Re: Satellite Pro L350-277 keeps giving message "unhandled exception error".

My Satellite Pro L350-277 keeps giving message "unhandled exception error". It occurs randomly, and the message box goes away if I click on "Continue" or "quit".

Does not appear to affect applications that are running at the same time.
My machine is heading a serious accident?

What is your laptop preinstalled with Toshiba (operating system factory pre-installed) recovery image?
Have you noticed that on the first day?

You know, it's not easy to say why this is happening, but maybe he appears after you have started to install additional software.

Tags: Toshiba

Similar Questions

  • I installed a Dell OS disk on my Satellite Pro L350-107

    Call me a fool, but I don't know much about drivers or install vista.

    I'll tell you guys everything in order to make as much sense as possible:

    I was just looking on my Toshiba Satellite Pro L350-107, a. MKV file on a program called "Zoom Player", it arises abruptly saying "zoom player has stopped working. So I clicked the pop-up on X but my laptop crashed and I had to power off button power holding down for 5 seconds.

    After this incident, I turned on the laptop back, everything was normal until about two minutes to check in, everything froze again and again and again until I gave up on it. The next morning, I discovered that my father has managed to use the account invited without problems, so instantly, I logged into my account to see pop ups like "flash cards stopped working" and anything associated with toshiba to crash, but I could always use internet.

    I decided to do a system restore, after 2 failed attempts I finally restored my laptop to the earliest date, and everything was fine until about an hour into the laptop, it would crash like what I explained above.

    Then my father got a copy of mcafee, and we were looking for viruses, at halfway of the analysis, it found 2 Trojan horses, but crashed in the middle of the overall analysis. Now, here's the real problem...

    I got an operating system disk, due to the fact that I thought he was just install vista again, I formatted the hard drive to the L350 - 107 and proceeded with the installation, but I had to install second hard disk, because on the c / reader could not. After intall vista was full, I wanted to check what are the components, but the operating drive was a dell disk use and now think that it is a dell. Now the screen is stuck on a screen of 32-bit and none of the pilot are related, due to them being drivers toshiba not dell.

    I tried looking for drivers and sought a downloadable operating system disk, but nothing has worked, toshiba stopped giving an operating with their laptops drive (so I heard).

    Please, someone help me! AS SOON AS POSSIBLE!

    Hello

    > toshiba stopped giving an operating with their laptops drive (so I hear).
    First of all more recent of Toshiba laptops HARD drive recovery option and allows to recover the computer laptop but only if the HARD disk was not formatted.
    Second, you will always find a creative software for the Toshiba Recovery disk pre-installed on Toshiba laptops. This tool creates the recovery disc!
    But this must be done before the disk was formatted HARD!

    In addition, you always get a reminder message that you must burn this image to a DVD:
    Important INFORMATION

    your system is equipped with a hard drive recovery system. If you need to repair
    your computer in the restaurant to original factory State, you can do it directly
    hard disk (press F8 when you start your computer, choose "Repair your computer"
    and follow the instructions in the menu) or create a media drive bootable recovery for this purpose.

    Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the
    Hat, you are able to restore your computer to the State of origin, installed at the factory, even if your computer
    is seriously damaged

    However, the issue of your...
    You have two options;
    Yu will format the HARD drive and install the operating system using the original Windows disc from Microsoft. Then, you can download drivers Toshiba from the European pilot of Toshiba page.
    Or you order the drive recovery Toshiba for this laptop from here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Satellite Pro L350 - code 0 x 00008086 BSOD stop.

    Hello

    Maybe I can find assistance or advice here:
    Satellite Pro L350 / 3 GB RAM / 160 GB HD / 2 x 2, 00 GHz Pentium Core Duo - OS: Vista Business OEM (as delivered)
    The machine is stuck in an operation of copy/paste from a website to an email and died with stop error message 0 x 00008086. No additional information said.

    No info to the MSKB available. Many forums say that it is due to a material error in the SATA controller, something with the ACPI mode - seems to depend on this, switching to compatibility mode in bios causes the machine to not dispay no BSOD more, but start of the operating system drive or recovery is not possible. Anyone know this topic or meet a similar prob?
    Thanks in advance for any reply (useful)...

    Ron

    Hi RJ.

    Generally these BSOD codes are mainly related to hardware or driver issues...
    Before exchanging something or contact an authorized repair service provider, I recommend you to reinstall Windows from the Toshiba recovery disc. This can restore with pre-tested settings factory settings and drivers of Toshiba. Normally, everything should work fine with him.

    If this is not the case, there is a hardware problem, but it is always hard to tell which part is exactly defective. Therefore, you need professional help from a technician for laptop.

  • How to replace a HARD drive on satellite Pro L350-16 has

    Hi all
    I have a satellite pro L350-16 has with a 160 GB drive HARD by running a Vista 32 bit operating system. I would like to change it to 500 GB.
    What should I do if I want to keep all the configurations that I have in the 160 GB of HARD drive.
    Thank you.

    Hello

    > What should I do if I want to keep all the configurations that I in the 160 GB HARD drive

    If I understand correctly, you want Vista 32 bit with all the configuration to 500 GB hdd? You can use a program called Acronis True image to a hard drive image backup and move it to another hard drive, then. Note that this program is not free, and you must activate it for use.

  • Satellite Pro L350-20N - screen feeds not on!

    I have a Toshiba Satellite Pro L350-20N.
    I used it a week ago and it worked perfectly, all hard drive and all.
    Then the next day I tried to turn on, I hear the fan turns and he's trying to boot from the disc. But the display does not illuminate.

    I tried hard restart taking the battery thing.
    I also checked that the RAM is fine.
    I also tried to hook up to an external monitor, but it did not come with something.

    What is the problem with my laptop?

    P.S. I need to run as soon as I start teaching.

    Thanks in advance!

    > What is the problem with my laptop?
    Motherboard problem? Maybe the CPU or GPU defective?
    Who knows

    Did you get that?
    Remove the battery, disconnect the adapter, press and hold the power button / stop along 30 sec.
    Now connect the battery and the AC adapter and try power upward
    If this does not help, your hardware has a serious problem

  • Satellite Pro L350 SSD upgrade does not work

    Hi all

    I'm trying to upgrade a Satellite pro L350 with ssd, currently I try with an ssd samsung 830. I've already updated the bios to version 2.2, but it doesn't work. Can someone help me?

    Concerning

    Mike

    and what exactly does not work?

    The SSD is recognized by the BIOS?
    Have you checked if the SSD has need of a firmware update or if a firmware update is available

  • Satellite Pro L350 - when you use internet through Wi - Fi screen hangs

    Recentlyt purchased by Satellite Pro L350. When to use internet through Wi - Fi screen hangs. I can not turn off.
    Had to remove the battery to stop. Recharged the battery and released in market, OK for a while then same occurrence.

    Help!

    Try to update the Firmware on your wireless access Point.

    Also try updating the BIOS and LAN drivers wireless on the laptop.

  • Satellite Pro L350 - where can I get the new BIOS?

    I downloaded the new BIOS - 1.60 for Satellite Pro L350 and it generates an error saying "This BIOS is not for your laptop".

    Where can I get the new BIOS - 1.60 for * PSLD0E Satellite Pro L350-154-02601WS4 *? Thank you

    Hello

    Are you sure that you have a Satellite Pro L350 PSLD0E?
    The series PSLD0E is a Satellite L350 (not Pro).

    But the BIOS update, you can find the Toshiba site.
    http://EU.computers.Toshiba-Europe.com

    Welcome them

  • Toshiba Satellite Pro L350 paved digital works do not

    Have a Toshiba Satellite Pro L350 the numloc stop working. Have a bios updated, try setting numloc in the keyboard of the screen, replaced keyboard. Still does not

    Any ideas?

    Hello

    Check their documentation online with the help of Toshiba, and ask in the forums about known issues.

    Toshiba - Forums
    http://laptopforums.Toshiba.com/

    Toshiba - Contacts
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    Toshiba - drivers - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Support
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    You can also check with a real computer (one that makes its own internal service and not a leek and)
    Displays a Best Buy or other stores).

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and

    My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and Mac Os 10.10.5 help please. Please respond by email to [email protected]

    I got this error 16 experience on my Macbook. The permissions for the Application Support folder have been changed.

    A simple fix Terminal can take care of that.

    Open Terminal (you can just tap Terminal in Spotlight to find it).

    Copy and paste this command in Terminal: sudo chmod-r 777 library/Application\ Support / Adobe

    Press enter, give your password if requested, and then try again. You may need to restart your Mac.

    Gene

  • Satellite Pro A40 guard stop with the ATI driver error message

    My girls having some problems with her laptop and get back to Uni at the end of week for me to have a look on.

    Basically, he keeps closing sometimes with an ATI graphics driver error message. I had updated the memory last Christmas and resinstalled from scratch.

    My first impressions are it is overheating and I probably need to clean the fan, was wondering if anyone had any ideas?

    Thank you very much
    Keith (South end)

    Satellite Pro A40 is about 3 years old and it is possible that the unit needs to be cleaned. If the appliance is used intensively, I assume that there is more dust inside. By overheating of the appliance stops suddenly without any warning.

    As a first step the device. I don't know if it's the right idea to do it alone, but if you are familiar with laptops, you can give a try. After having done that, your daughter should carefully watch what happens the next few days.

  • Satellite Pro L3000-110 keeps restarting

    Satellite Pro L3000-110, continues to restart and all that I am in the middle of is lost, then a message that appears "the system has recovered from a serious problem" and "if it is not the first time then you must contact the system administrator."

    Also the material wizard continues to tell me that it has detected the USB 2.0 hardware must be installed and I have to insert the disc if I a.

    It is useless like this.

    Hello

    Do you have any other device connected to the USB port?
    If so, unplug the device and perform a test of the laptop without connected parts.

    Sometimes, it would be possible that a such USB connected device will interrupt.

    If this does not improve the situation, get the laptop back to factory settings and try again

  • Satellite Pro M30: Clock keeps going back 1 hour

    Hello

    One of the users has a Satellite Pro, model No: PSM35E, the clock on the PC continues to go back 1 hour. Even after that the clock is replaced with the correct settings (GMT... etc, DST is checked). But when it has restarted, it defaults to return 1 h?

    Known problems with this?

    Concerning
    Raz.

    Hey Raz

    I found this topic on many forums of PC and it is not related to specific PC or laptop and the strange is that I never found any explanation for this. If your device is permanently online, I recommend you to use automatically synchronize with a time server option Internet in Date and time properties.

  • Satellite Pro C650 - Audio keeps cutting

    Hi guys,.

    I searched high and low for the answer to this question and its driving me crazy. I really hope you guys can help out me!

    I have a Toshiba Satellite Pro C650 01301J laptop running Windows 7 Professional 32 bit. I try and listen to the music through spotify or simply using my music in Windows Media Player library.

    However after a while the sound cuts. It is not muted in the mixer and the song continues to play as if nothing has changed, except that I can't hear anything.

    This problem is corrected when I disable and re-enable or increase the volume upwards or downwards using the fn keys.
    When I first start the music it take 5 minutes or more before that happens, but once it starts it stops every 10 seconds or more. It becomes extremely annoying and I am convinced that there must be a solution.

    My audio driver is Conexant SmartAudio HD version 4.119.0.61 CX20671. I tried to remove it and put it back, download an updated old and updated driver. He told me that it's the most recent driver, but its still not solved the problem.

    This happened to someone else? Is there another driver I could try, or maybe a program that is the cause?

    I would appreciate your help in what its driving me crazy not being able to listen to any form of music without it cutting up every 10 seconds...

    Have you noticed this strange question on the first day of use, or later?

    It is not easy to say what the problem is, but I think that it is somehow a software related issue.
    You know what, try reinstalling additional Toshiba package and test it again. I put t know if this will fix it but it is worth trying.

    Please post comments.

  • Satellite Pro P200: Cannot install Server 2003 - parity memory error

    I have a Satellite Pro P200 and to the work required to install Windows 2003 server on it, but all I get is an error message:

    -Hardware malfunction

    Call your provider of support material

    NMI: Parity check / memory parity error

    -The system is shut down

    I checked the memory and everything seems OK. Vista runs very well on it, and all memory is recognized. I tried different flavors of Server 2003, although all I need is standard edition. Anyone who has met this problem, or someone has any suspicion as to how I can get it operational.

    So, how tested the RAM? With Memtest? Or Prime95?

    I read in many forums that people work servers (no laptop...) SERVERS) that correctly work 1 year with ECC memory, then windows 2003 server gives the same error message you have.

    I mean if Vista works flawlessly and you checked as you say the RAM while there could be a mismatch which must not be for lack of toshibas.
    Maybe you should try a linux ubuntu server edition, which works great on almost * ALL * systems, even on systems with faulty CPU/memory (Ok, ok, not 100%, but it works, I got this case :))

    So, maybe you can try to exchange the RAM, but if you're still the same error then ask microsoft or try another P200, if they are available.

    Sorry dude, but I Don t have a lot of ideas in your situation :/

    Welcome them

Maybe you are looking for