Re: Satellite Pro L670-103 - not able to connect to the internet using LAN

Similar Questions

• I am not able to connect to the internet using the Explorer 9

  I am able to ping and other sites yahoo and get 0% loss on my packages but when I try to connect I am greeted with a blank page showing the Web page can't show what I can do to connect, I uninstalled and reinstalled explorer 9 and still have the same problem, I contacted my ISP and all the equipment is working properly I contacted the manufacturer of the router and the tell me that the computer may have a virus, I ran that several antivirus on the computer scans and all come clean any contributions to this issue would be greatly appreciated thanks

  Hello
  • What were the changes made before the show?
  • Have you checked in different browser?
  You can check this link:
  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer
  http://support.Microsoft.com/kb/956196

• not able to connect to the internet using windows this

  Client is unable to connect to the internet. Customer bought Netbook with Windows CE. Just bought the laptop which has Win CE and it gets an error on the screen asking him to enter an IP address. Is there a way to fix this?

  Thank you!

  Hello

  You can check the link below on what happened to Windows support this

  http://social.msdn.Microsoft.com/forums/en/roboticscommunity/thread/e5668135-FAB1-483c-A76E-e01782255ec1

• Recently, I got the following virus. Win32/Sirefef.DAtrojan, I was not able to connect to the internet since then.

  Original title: Win32/Sirefef.DAtrojan

  Recently, I got the following virus. Win32/Sirefef.DAtrojan

  I was not able to connect to the internet since then.
  Y at - there someone who can help me with the connection to the internet?
  I have a Dell XPS600
  Microsoft XP Professional

  Hello

   
  1. what happens when you try to connect to the internet?
  2 - is confined to the browser Internet Explorer problem?
   
   
  I suggest you perform a full scan of the system.
  Here is a link that will give you know how
   
  Perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Im not able to connect to the internet?

  Im not able to connect to the internet and the message that reeds "the instruction at"0x00bb707c"referenced memory at 0x1ab4a07 memory could not writen

  Hello

  1. don't you make changes to your computer before the problem?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Test the issue in safe mode with network.

  Step 2:

  If it works fine in safe mode with network, turn on your computer in a clean boot State and check if the problem persists.

  Note: Don't forget to restart your computer as usual.

• not able to connect to the database using the oracle instant client

  Hello
  
  I am not able to connect to the database using the instant oracle from my local PC client. They use to connect to the database files and sqlnet.ora files LDAP.ora. If I want to test the connection, I found this executable tns wasn't there, so not able to tnsping. So I'm not able to solve this problem.
  
  Please let me know if a solution for everything
  
  Client Oracle: oracle 10.2bFAT client 32-bit
  
  Platform: windows 7 64-bit
  
  Thank you
  Veera

  There is little that tnsping can do sqlplus can't.

  Instead of
  tnsping mydb.myorg.com
  Try
  sqlplus-s-L /@mydb.myorg.com
  or
  sqlplus-s-L user/[email protected]

  If you get
  ORA-12154: TNS: could not resolve the connect identifier specified
  you know that the customer could not resolve 'mydb.myorg.com '.

  If you get
  ORA-12541: TNS:no listener
  then "mydb.myorg.com" could be resolved, but there is no listener it running.

  If you get
  ORA-12514: TNS:listener is not currently of service requested in connect descriptor
  then "mydb.myorg.com" could be solved, the listener is in place, and the database is out of service.

  If you get
  ORA-01017: name of user and password invalid. connection refused
  you know that 'mydb.myorg.com' has been successfully resolved, and the database is running.

  If you want more details, such as how and what "mydb.myorg.com" is resolved, turn the tracking by adding the following to "sqlnet.ora:
  TRACE_LEVEL_CLIENT = ADMIN
  TRACE_DIRECTORY_CLIENT = C:\TEMP (a writable directory)

  Then you will find lines like this in the trace file:

  -THE INFORMATION SOURCE PARAMETER FOLLOWS-
  Attempt to load system pfile source C:\oracle\network\admin\sqlnet.ora
  Source of the setting successfully loaded

  Attempt to load the local pfile source C:\Dokumente und Einstellungen\lanadvall\sqlnet.ora
  The parameter source has not been loaded.

  This shows you which configuration files are read, followed by the settings real read.

  nnfgrne: will read if path adapters
  nnfgrne: switching adapter LDAP

  He's now looking for LDAP name resolution.

  nnfloidinfocache: Info: insert the value DIRECTORY_SERVSSL = oid.host.myorg.com:389 at index 0 in NLPA_CACHE

  These are LDAP servers, he is trying.

  nnflilc: conn sync opening of oid.host.myorg.com:389

  nnflfdn: turning simplified mydb.myorg.com name to a unique name.
  nnflfdn: using the administrative context: dc = prod
  nnflfdn: the domain name resulting is cn = mydb, cn = OracleContext, dc is myorg, dc = com

  nnflrne1: runs the directory for dn: cn = mydb, cn = OracleContext, dc is myorg, dc = com
  nnflqbf: search: Base: cn = mydb, cn = OracleContext, dc is myorg, dc = com, range: 0, filter: (objectclass = *)

  nnfgrne: query fails, the leap to the next map

  Did not work. Try the other adapters:

  nnfgrne: switching adapter EZCONNECT

  snlinGetAddrInfo: name resolution failed for test64.test

  No luck.

  If the resolution is approved, it will look like this:

  nnfloidinfocache: Info: insert the value DIRECTORY_SERVERS = oid.host.myorg.com:389 at index 0 in NLPA_CACHE

  nnflilc: conn sync opening of oid.host.myorg.com:389

  nnflfdn: turning simplified mydb.myorg.com name to a unique name.
  nnflfdn: using the administrative context: dc = prod
  nnflfdn: the domain name resulting is cn = mydb, cn = OracleContext, dc is myorg, dc = com

  nnflrne1: runs the directory for dn: cn = mydb, cn = OracleContext, dc is myorg, dc = com
  nnflqbf: search: Base: cn = mydb, cn = OracleContext, dc is myorg, dc = com, range: 0, filter: (objectclass = *)

  niotns: the call to address: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dbserver.host.myorg.com) (PORT = 1521)) (CONNECT_DATA = (SID = DBNAME) (CID = (PROGRAM = C:\Oracle\ora1020\bin\sqlplus.exe)(HOST=pc247596)(USER=lanadvall)))

  Yours,
  Laurenz Albe

• Not able to connect to the database using OS othenticated user.

  Hi team,
  
  We use HP UX servers, recently we pass the passive node to active (cluster OS) after that we are not able to connect to the database using OS authenticated the user, but I am able to conenct by user oracle sunig... !
  
  Please suggest me.
  
  Thank you
  Maurel.

  Please copy - paste the screen indicating the connection attempt with the authentication of the BONE and the error message.

• HP laptop - 15-g221au: Hi, I am not able to connect to the internet. WiFi works do not.

  Hi, I am unable to connect to the internet. WiFi works do not. not able to find the right drivers for 32 bit win.7. need urgent help...

  You are the very welcome.

  You need these drivers wireless and bluetooth.  Registered as 64-bit but the 32-bit driver files are also included.

  Driver LAN wireless Broadcom

  File name: sp69014.exe

  Software and driver Broadcom Bluetooth 4.0

  File name: sp66402.exe

• Not able to connect to the internet via blackberry Simulator

  Hello! I use Windows7 32 bit and Blackberry Java plug-in for Eclipse version 1.5.0 and part net.rim.ejde.componentpack7.0.0_7.0.0.33 package. I am not able to connect to any external URL browser Simulator. Whenever I try to hit any URL, I get an error "could not find the server asked.

  When I start the MDS Server, I get the following log:

  02/12/27 20:00:32.106 IST >: [0]:::
  02/12/27 20:00:32.117 IST >: [1]:::
  02/12/27 20:00:32.184 IST >: [2]:::
  02/12/27 20:00:32.251 IST >: [3]:::
  Thai, IBM00858, IBM01140, IBM01141, IBM01142, IBM01143, IBM01144, IBM01145, IBM01146, IBM01147, IBM01148, IBM01149, IBM037, IBM1026, IBM1047, IBM273, IBM277, IBM278, IBM280, IB
  4, IBM285, IBM297, IBM420, IBM424, IBM437, IBM500, IBM775, IBM850, IBM852, IBM855, IBM857, IBM860, IBM861, IBM862, IBM863, IBM864, IBM865, IBM866, IBM868, IBM869, IBM870, IBM871, I
  18,ISO-2022-CN,ISO-2022-JP,ISO-2022-JP-2,ISO-2022-KR,ISO-8859-1,ISO-8859-13,ISO-8859-15,ISO-8859-2,ISO-8859-3,ISO-8859-4,ISO-8859-5,ISO-8859-6,ISO-8859-7,ISO
  59-8,ISO-8859-9,JIS_X0201,JIS_X0212-1990,KOI8-R,KOI8-U,Shift_JIS,tis-620,US-ASCII,UTF-16,UTF-16BE,UTF-16LE,UTF-32,UTF-32BE,UTF-32LE,UTF-8,Windows-1250,window
  251,Windows-1252,Windows-1253,Windows-1254,Windows-1255,Windows-1256,Windows-1257,Windows-1258,Windows-31J,x-Big5-HKSCS-2001,x-Big5-Solaris,x-EUC-JP-Linux,x-
  -TW,x-eucJP-Open,x-IBM1006,x-IBM1025,x-IBM1046,x-IBM1097,x-IBM1098,x-IBM1112,x-IBM1122,x-IBM1123,x-IBM1124,x-IBM1364,x-IBM1381,x-IBM1383,x-IBM33722,x-IBM737,
  BM833,x-IBM834,x-IBM856,x-IBM874,x-IBM875,x-IBM921,x-IBM922,x-IBM930,x-IBM933,x-IBM935,x-IBM937,x-IBM939,x-IBM942,x-IBM942C,x-IBM943,x-IBM943C,x-IBM948,x-IBM
  x-IBM949C,x-IBM950,x-IBM964,x-IBM970,x-ISCII91,x-ISO-2022-CN-CNS,x-ISO-2022-CN-GB,x-iso-8859-11,x-JIS0208,x-JISAutoDetect,x-Johab,x-MacArabic,x-MacCentralEu
  e,x-MacCroatian,x-MacCyrillic,x-MacDingbat,x-MacGreek,x-MacHebrew,x-MacIceland,x-MACROMAN,x-MacRomania,x-MacSymbol,x-MacThai,x-MacTurkish,x-MacUkraine,x-MS93
  213,x-MS950-HKSCS,x-MS950-HKSCS-XP,x-MSWIN-936,x-pck,x-SJIS_0213,x-UTF-16LE-BOM,X-UTF-32BE-BOM,X-UTF-32LE-BOM,x-Windows-50220,x-Windows-50221,x-Windows-874,x
  ndows-949,x-Windows-950,x-Windows-ISO2022JP >
  02/12/27 20:00:32.254 IST >: [4]:::
  02/12/27 20:00:32.255 IST >: [5]:::
  02/12/27 20:00:32.255 IST >: [6]:::
  02/12/27 20:00:32.268 IST >: [7]:::
  02/12/27 20:00:32.269 IST >: [8]:::
  02/12/27 20:00:32.269 IST >: [9]:::
  02/12/27 20:00:32.269 IST >: [10]:::
  02/12/27 20:00:32.269 IST >: [11]:::
  02/12/27 20:00:32.270 IST >: [12]:::
  02/12/27 20:00:32.270 IST >: [13]:::
  02/12/27 20:00:32.270 IST >: [14]:::
  02/12/27 20:00:32.289 IST >: [15]:::
  02/12/27 20:00:32.290 IST >: [16]:::
  02/12/27 20:00:32.325 IST >: [17]:::
  02/12/27 20:00:32.329 IST >: [18]:::
  02/12/27 20:00:32.338 IST >: [19]:::
  02/12/27 20:00:32.338 IST >: [20]:::
  02/12/27 20:00:32.338 IST >: [21]:::
  02/12/27 20:00:32.339 IST >: [22]:::
  02/12/27 20:00:32.341 IST >: [23]:::
  02/12/27 20:00:32.342 IST >: [24]:::
  02/12/27 20:00:32.345 IST >: [25]:::
  02/12/27 20:00:32.346 IST >: [26]:::
  02/12/27 20:00:32.346 IST >: [28]:::
  02/12/27 20:00:32.346 IST >: [29]:::
  02/12/27 20:00:32.347 IST >: [30]:::
  02/12/27 20:00:32.346 IST >: [27]:::
  02/12/27 20:00:32.353 IST >: [31]:::
  02/12/27 20:00:32.356 IST >: [32]:::
  02/12/27 20:00:32.356 IST >: [33]:::
  02/12/27 20:00:32.356 IST >: [34]:::
  27, 2012 20:00:32 org.apache.catalina.startup.Embedded start
  O: boot tomcat server
  02/12/27 20:00:32.792 IST >: [35]:::
  02/12/27 20:00:32.796 IST >: [36]:::
  02/12/27 20:00:32.817 IST >: [37]:::
  02/12/27 20:00:32.820 IST >: [38]:::
  02/12/27 20:00:32.827 IST >: [39]:::
  02/12/27 20:00:32.828 IST >: [45]:::
  02/12/27 20:00:32.828 IST >: [44]:::
  02/12/27 20:00:32.828 IST >: [43]:::
  02/12/27 20:00:32.828 IST >: [42]:::
  02/12/27 20:00:32.828 IST >: [41]:::
  02/12/27 20:00:32.827 IST >: [40]:::
  02/12/27 20:00:32.830 IST >: [48]:::
  02/12/27 20:00:32.832 IST >: [49]:::
  02/12/27 20:00:32.832 IST >: [50]:::
  02/12/27 20:00:32.832 IST >: [51]:::
  02/12/27 20:00:32.829 IST >: [47]:::
  02/12/27 20:00:32.829 IST >: [46]:::
  27, 2012 20:00:32 org.apache.catalina.core.StandardEngine start
  O: Servlet engine starting: Apache Tomcat/6.0.28
  02/12/27 20:00:32.932 IST >: [52]:::
  02/12/27 20:00:32.932 IST >: [53]:::
  02/12/27 20:00:32.944 IST >: [54]:::
  02/12/27 20:00:32.944 IST >: [55]:::
  27, 2012 20:00:33 org.apache.catalina.startup.ContextConfig defaultWebConfig
  O: no default web.xml file
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: AdministrationController (status): init
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: AdministrationController (statistics): init
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: AdministrationController (Proxy Mappings): init
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: AdministrationController (AccessControl): init
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: AdministrationController (Configuration): init
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: AdministrationController (Device Mappings): init
  Log 27, 2012 20:00:33 org.apache.catalina.core.ApplicationContext
  O: C:\Eclipse\plugins\net.rim.ejde.componentpack7.0.0_7.0.0.33\components\MDS\Servers\MDS1
  27, 2012 20:00:33 org.apache.catalina.startup.ContextConfig defaultWebConfig
  O: no default web.xml file
  27, 2012 20:00:33 org.apache.tomcat.util.net.NioSelectorPool getSharedSelector
  O: using a switch shared for read/write to servlet
  27, 2012 20:00:33 org.apache.coyote.http11.Http11NioProtocol init
  O: initializing Coyote HTTP/1.1 on http-8081
  27, 2012 20:00:33 org.apache.coyote.http11.Http11NioProtocol start
  O: starting Coyote HTTP/1.1 on http-8081
  02/12/27 20:00:33.671 IST >: [56]:::
  02/12/27 20:00:37.169 IST >: [57]:::
  02/12/27 20:00:37.169 IST >: [58]:::

  Any help would be appreciated.

  Thanks in advance

  Mayank Garg

  Auntie Consultancy Services

  You will also need to enter the login and the password for your proxy server in the file rimpublic.property.

• Why is-Acrobat Creative cloud Mac App not able to connect to the internet?

  After installing Acrobat DC, my desktop creative cloud application cannot connect to the internet. Everything is done constantly trying to connect without any result. See the photo below. Can someone tell me what to do? I open the other I can not update desktop butwith great CC applications apps.

  

  Hi Diqing, please try App does not open. Wheel of progress constantly calls and share the results. We would like to also know what version of OS are you using?

  To troubleshoot connectivity, you can also try: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  Waiting for your response.

  Thank you

  Atul Saini

• Satellite L300D-10U - unable to connect to the internet using LAN and Win XP

  Hi all

  I had a very big problem with my card.
  I can t connect to the internet.
  I searched the forum but without any determination :(

  I did everything. I have checked ipconfig nothing, check the mode safe mode with local network nothing.
  Someone said too
  "(1) once the Ethernet is connected, power of the DSL Modem. Cycle." ("Some Modem picks up the MAC ADDRESS of the network card on where it was previously connected and restarting it redétecte this new")

  How to disable the modem?
  And another question: can someone tell me what works of LAN drivers in Sat L300D-10U on XP?
  I put t even know that :(

  Help me

  Hello

  The Satellite L300D-10U belongs to the series of PSLC0E and it supports the Realtek LAN card.
  LAN driver can be found on the page of Realtek.

  You ask how to disable the modem? I think you mean how to reset modem DSL
  Well, usually your modem should support an ON / OFF button simply turn it off and then turn it back on.

  If you are unable to access the internet then you should first check if your modem is properly configured and that the right data ISP (internet service provider) was used.

  Sorry, but that's all I can say right now I think you should just check your modem settings, make sure that the NIC is properly recognized and connect the model of the laptop using a LAN cable.

  All that s

• Not able to connect to the internet and don't say no connectivity on Windows XP

  Try to connect to the internet and wrote no connectivity and it is reading the internet, but he wont Cross and call the internet service provider and tried to go on the internet and still get the same error, and then FAI technician said that the Windows Firewall is turned on but the settings but can still see that it is enabled and try to connect to the internet and still says no connectivity.

  Hello

  You can send us the output of the command "ipconfig/all"?

  Click Start - run and enter "CMD" and click OK. Write "ipconfig/all" and press "Enter."

  Use COPY and PASTE here the output of this command.

  LC

• Not able to connect to the database using SQLPLUS.

  Hello

  in the connection to the oracle in linux machine using sqlplus utility database I got following error.

  does anyone have an idea about this error?

  [oracle@LOM-NEYTR-RHEL-NEW1 dbhome_1] $ sqlplus

  SQL * more: Production of release 11.2.0.1.0 game may 15 10:22:50 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Enter the user name:

  Enter the password:

  ERROR:

  ORA-00604: an error has occurred at the SQL level 1 recursive

  ORA-01653: unable to extend the table SYS. AUD$ 8 in the SYSTEM tablespace

  ORA-02002: error writing to the audit trail

  ORA-00604: an error has occurred at the SQL level 1 recursive

  ORA-01653: unable to extend the table SYS. AUD$ 8 in the SYSTEM tablespace

  7144389e-3944-4D5C-830e-46539d2d9971 wrote:

  I found the temporary solution. You can go through the following link where I got the idea.

  Oracle: 11g automatically audit | Buffer-Blog

  So has what "temporary" solution applied?

  And especially, what is the permanent solution will you.

  The most common solution, which goes back at least to when I started with v7.3, is to move the aud$ table out of the SYSTEM tables.  And with 11g, there is even a new package for the management of the audit trail, including a method for moving the table.  See DBMS_AUDIT_MGMT

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• I'm not able to get on the internet.  my phone is on cell phone and my historiqueest software

  I am not able to connect to the internet with my iphone

  You see error messages?

  Try to reboot/reset your phone.