Re: Satellite R630 - HDMI - the image on the TV was not whole screen

Hi all

I just tried to connect my Satellite R630 with my LCD TV with a HDMI cable. However, the image on the TV was not all screen, with the HDMI 1 port (my TV has 3 HDMI ports), there was still the black space of 1.5 inches.

I was wondering if there is anything I missed? The connection with the TV was very good with a good old VGA cable. Thanks for any advice.

Tim

Have you tried to play with all available display settings?
I put t know who don't Satellite R630 you exactly and what graphics card is inside, but check it please all advanced options to show the settings first.

Tags: Toshiba

Similar Questions

  • How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

    How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

    Go to the Toshiba support site and search page of your PC/computer laptop.

    Download and then install the last set of specific drivers for W7.

    See you soon,.
    Jerry

  • will never be an update where you can erase a background object of an image without clear photo behind the object and have the result as if the object was not always on the picture in the first place.

    Will never be an update where you can erase a background object of an image without clear photo behind the object and have the result as if the object was not always on the picture in the first place.

    I guess this feature without doubt not will be part of Lightroom because of the non-destructive nature publishing. Is that programs like Photoshop are for. But I don't speak for Adobe, because I do not work for them, and I did not all understand what are their plans for the future.

  • When I click on a link, I get the address was not included

    I use outlook. When I click on a link, I get a message that "the address was not understood. I need to open links.

    Do you mean Outlook, the program which is part of Microsoft Office on your PC, or Outlook, the new Hotmail?

    If you right-click > copy the location of the link and then paste it into the address bar, it starts with an unusual Protocol? I mean, something other than http or https? If so, Firefox cannot be put in place to open links with this Protocol. What is it?

  • Color calibrator may not work correctly, because the display does not fill screen.

    I have a Thinkpad W520 with 1920 x 1080 HD display and the color sensor. I tried to run the color standard application but always, she will work until the end but cannot process measures. So I opened the lid in the middle of a calibration and discovered that the color screen that is supposed to be seen by the sensor is not full screen, thus preventing the color measurement sensor. How can I set the graphics so that this application is displayed full-screen when executing? Thank you.

    Yes. But I just solved the problem. I set my display to display the text, icons, etc., to 150% of normal resolution. Somehow, he was causing the application displays only a partial screen. I set the magnification to 125% and now the standard color works very well.

  • niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

    Hi all!

    I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

    Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

    I also downloaded example c# measure DC Voltsto compare with my request.

    Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

    DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

    I guess it is function of device PXI!

    I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

    NOR-DAQmx 8.9.5

    NOR-DMM 3.0.1

    NI-VISA 4.6.1

    NOR-MAX 4.6.2f1

    Roberto

    Hello Robson,

    Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

    KB 33A96PCW: receive error-1074118656 when running OR DMM screws

    Let me know if this might help.

    Best regards.

  • Microsoft It - fix diagnose and repair Windows and problems would not install on my computer. He said the chain was not in the right format. Clues?

    I installed Microsoft Fix It on my computer (MSXP). The diagnosis and repair of the Windows files and problems would not install on my computer. He said the chain was not in the right format.  Clues?

    Hi Kathryn1713,

    ·         You are not able to run the Microsoft Fixit tool?

    If so, you can post your query on the Forums of Microsoft Fixit. Please see the following link for the same.

    Microsoft Fix Center - NO support general questions Forum

  • I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

    I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

    Hi A1W1LL,

    A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

    To perform the clean boot procedure, follow the instructions in the link below.

    Step 1: Perform a clean boot
    Step 2: Enable half the services
    Step 3: Determine whether the problem returns
    Step 4: Enable half of the startup items
    Step 5: Determine whether the problem returns
    Step 6: Resolve the problem
    Step 7: Reset the computer to start as usual

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135

    After reviewing the issue, put the computer into Normal mode.
    Uninstall or update the program that is causing the problem.

    If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

    1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
    2. Press any key when the message "Press any key to boot from CD or DVD".
    3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
    4. click on repair your computer.
    5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
    6. in the System Recovery Options dialog box, click System Restore.
    7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
    8. click Finish to restore the system.

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • 0x800704D3 error: the backup was not completely successful. The application has been abandoned, as he tried to take backup

    Original tile: appeared at the end of backup when the error message appeared. "The reverse was not entirely successful. The request was abandoned. (0x800704D3)

    Recently I had a problem with the combo of virus/malware.  Antivirus 2010, was then brought by an another 'guru' to download StopZilla.com who started the Delete files accompanying the computor.  I have kept and can't get rid of the problem, so decided to back up files, and then put in recovery disks.  Appeared at the end of backup files with the ninth disk, when the error message above has occurred. Is not something else.  Someone said elsewhere "make sure that the AC adapter is on"... what?  THA is the problem?

    Seen also it is suggested to get an external hardware, but what about hang the laptop to existing pc?  Would you do that?  What wiring do I need?

    Hi beltwaytraveler,

    1. you have any third-party backup program installed?

    2 have you tried to use a different backup disk?

    Method 1:

    You can temporarily uninstall third-party anti-virus on your computer protection software and then check if the problem occurs.

    Note: Be sure to install the security software on the computer after you fix the problem.

    Method 2:

    You can also try to uninstall any third-party backup program installed on the computer and try the backup.

    Method 3:

    You try to run the following command and check if all third-party services are running other Microsoft services.

    a. Click Start, click programs, accessories principally made, right click Guest and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

    b. type the following command and press ENTER:

    vssadmin list writers

    c. check the VSS writers listed.

    If you see any third-party service other than Microsoft services running, and then let us know about it.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Programs can not be started, or no response after the computer was not awake mode "Eve"

    Dear Sir.

    My lap top is under the VISTA system. Now the problem is that all programs can not be started or no response after the computer was not awake mode "Eve". I have to restart the computer to recover the computer to normal state.

    Please please let me have your advice to return to my email address: * email address is removed from the privacy *.

    Thank you very much!

    Eric

    Hi Eric,.

    You can follow these steps:

    Step 1: perform a clean boot to verify if an application or service is causing the problem.

    See this article for more information on the clean boot:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
     http://support.Microsoft.com/kb/929135

    Steps to perform a clean boot:
    a. click the ORB start on your desktop
    b. type msconfig in the search box and press ENTER.
    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    c. in the general tab, click Selective startup.
    d. under Selective startup, clear the check box load startup items.
    e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
    f. click OK.
    g. When prompted, click on restart.

    NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

    Step 2: Configure the power settings for keyboard, mouse, and other devices.

    a. Click Start, click Control Panel, hardware and sound, and then click keyboard.
    b. click on the Hardware tab, and then click the properties button.
    c. click Change settings.
    d. click the power management tab and verify that the allow this device to wake the computer is selected.
    e. If "Allow this device to wake the computer" was not selected, select it and click OK.
    Follow the same steps for the mouse as well.

    If the problem persists, disconnect all non-essential devices (printers, scanners, USB drives). Restart the computer with only the original mouse, monitor, and
    connected keyboard. If this solves the problem of sleep/wake, one of the devices was causing the problem. Replace a device at a time and test to see if the
    problem occurs again. Continue adding devices and testing until you find the device that causes the problem.

    Refer to this article for additional troubleshooting steps.


    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista:
    http://support.Microsoft.com/kb/950686

    Kind regards
    Afzal Taher - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • The machine was not announced as having a touchscreen but screen has a touch screen.

    original title: Asus Touchscreen

    Hello

    I have a laptop K55A-SX056V Asus with Windows 7 Home Premium 64-bit.
    The machine was not announced as having a touch screen, but it does:

    -When I get system information he said touch input available with 20 points.

    -When I run the wizard upgrade of Windows 8 he said that the computer has a touch screen.

    -By reinstalling Windows, it comes with all the programs touch in the Panel who also say that it has a touch screen.

    I think I'm looking for a driver as modifications to the options of the Panel makes a difference and it seems there is no driver in Device Manager.

    At soon Hazza

    Your system does not have a touch screen, the touchpad is identified as 'touch enabled'

    Get updates from Asus driver support only.

    (Same thing can happen with Dell laptops)

  • Problems installing Windows 7 64-bit SP1: "The Installation was not successful" DS_S_SUCCESS (0x0)

    I'm unable to install the Windows 7 SP1 on my laptop.  I am running Win 7 64 bit and tried to install the 64-bit SP1 via the feature updates automatic first, then with the SP1 download manually (Windows6. 1 - KB976932 - X 64 .exe).   The progresses to install SP1 to the point where it shuts down the system and it is charging but when I log in I get the dialog Setup SP1 reporting "the Installation was not successful".  By clicking on the link error display shows DS_S_SUCCESS (0x0).

    (I followed the steps of troubleshooting 1) by using the Troubleshoot Utility "Difficulty of problems with Windows Update" and 2) installed tool Rediness of updating system, but the installation of SP1 still fails with the same error.

    I have successfully applied the SP1 on a different system.  No idea why I have problems with my laptop.

    Any ideas?

    C thx.

    Have you checked your hard drive to find errors? Another obscure, you might try is to disable User Account Control temporarily.

    Its possible, you need to perform an update of the BIOS if one is available for your ThinkPad T60p. Also, check the updated chipset drivers.

    Furthermore, disconnect any non-essential device, you may have attached to the system.

    Its possible the SP1 download may be corrupted, I would like to download another copy and try again.

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • "Could not apply the workspace because the file was not found."

    I've just upgraded to the latest version of Photoshop (CC 2015.5). Some of my photoshop files does not open and I get an error message: "could not apply the workspace because the file was not found."

    I have uninstalled/installed Photoshop CC 2015.5, I uninstalled and installed two previous versions of Photoshop, I reset my preferences, and I repaired disk permissions.

    None of them worked.

    What would it be?

    Hello

    Quick note giving clarification on the 2105.5.1 update: the error message that the OP has reported is inaccurate for the State. The update should simply fix the alert to note that it is impossible to open the file, instead of the misleading warning that a workspace cannot be applied.

    We did not all patches to open a file that fails intermittently. We have still not an understanding of root to the problem the OP has been run in.

    Kind regards

    Steve

  • "Could not complete your request because the file was not found."

    Hello!! I can't open any file .jpg in trial version Photoshop CC 2014. I get the error message "Could not complete your request because the file was not found."

    .png and .psd files work perfectly well. Any help would be greatly appreciated.  Thank you

    Error: 'File not found' when opening JPEG files Link to the installation program Adobe Camera Raw 9.4.

  • PS: Could not complete your request because the file was not found.

    Mac OS X 10.7.5.

    PS CC 2014 2.2.

    Since I've updated my CC of the PS today, I'm unable to open jpg in PS files, even the JPG files that I had no problem opening in PS so far. Whenever I try, I get the following error message:

    "Could not complete your request because the file was not found."

    (I'm able to open PSD files, however.)

    Help someone? Much appreciated!

    Which could result from the 9.5 camera raw update.

    Error: "file not found" when opening JPEG files

Maybe you are looking for

  • HP Pavilion 15 e026 sr SM BUS controller driver

    Series: E3Y92EA #ACB Cannot find drivers foe this elaborates: 1) PCI\VEN_1022 & DEV_780B & SUBSYS_1983103C & REV_16PCI\VEN_1022 & DEV_780B & SUBSYS_1983103CPCI\VEN_1022 & DEV_780B & CC_0C0500PCI\VEN_1022 & DEV_780B & CC_0C05 2) PCI\VEN_1002 & DEV_666

  • Access to the eccentric camera and GPS problem

    I love this phone and use it for a few weeks now. I know that the update just worked for T-mobile, and the biggest problem he treats is the camera. My question is if anyone knows if this update fixes other issues? One of them is how he takes the X bi

  • Confusion about the two c libraries ++ supplied with the NDK

    Hiya, There seems to be two sets of c ++ libraries available with the NDK (I use 2.0.1): the "Dinkum" libraries, which are clearly mentioned and documented (and included by default with C/C++ projects in Momentics) and GNU libraries. Both are also pr

  • Is legitimate (unused) use seven license to another pc

    Hello I bought a PC with Seven Family 64-bit preinstalled, so I have a number of play (first). I installed (clean install) on this PC window Ultimate, branch of the trade of detail, so with another (second) part number of theatre. So I do not use the

  • Digital Editions says that the books are loaded on the Kobo and Kobo library is empty.

    Hello, I have a problem loading the content on my Kobo (Aura H2O). Previously, I was able to add books to the library without any problems following the directions online, but it has spontaneously stopped working.Location:I've loaded onto Adobe Digit