Re: Satellite U500 begins with the "not enough space in runtime area» message

Similar Questions

• Not enough space in Runtime area. Data not available SMBios. Inaccessible BIOS

  Hello, I was trying a restore or Windows 7 install on a p6510y for a friend. Tried going into the bios to select which device to boot from.

  I hit F10, it says enter the bios or enter the configuration..., then it goes to a black screen with a blue bar at the top. The blue bar is bright blue in the middle and it fades to the edge of the screen. It is not animated. I see no text or the cursor blinking either.

  If I do not go into the BIOS, I get the message "not enough space in Runtime area. SMBios data will be unavailable"and if I hit F2 to continue, windows starts normally.

  I stripped the system down to a single stick of RAM, tried a different PSU, graphics card, vga cable, etc.. I removed the cmos battery and flies over the rider for a solid 30 mins. I can not even access the bios.

  It's a machine extremely strongly virused, I was able to install Windows 7 via disk external drive bootable. The recovery partition is still intact, although it seems empty, still too much space.

  I ran sp49851.exe in windows 7 on the machine, the installation has been apparently successfully, but the BIOS always behaves in the same way.

  I am at a loss, have spent many hours in checking these forums of discussion, does not. Is it possible for me to prepare a bootable USB key and manually install the bios? I extracted the contents of the exe to a folder but I don't know what to do next. The computer has a floppy drive port. For any help or suggestion would be greatly appreciated. Thank you in advance!

  I was able successfully to Flash the BIOS manually, and it behaves as it should. Here's what I did:

  I extracted the contents of my bios file (sp49851.exe), using a program called Universal Extractor.

  I renamed the file alo6.09 to bios.rom (this was the only file required)

  I followed this guide:

  http://www.BIOS-mods.com/BIOS-update/

  Make SURE you get the HP USB Disk Format Tool, they provide a link.

  Make SURE you get the BACK image they provide a link for.

  I used AFUDOS for my AMI BIOS, from which the above ROM file extension. (they provide a link to AFUDOS)

  I used the command line afudos bios.rom/p/b/n/c/e/k/q/reboot (EXACTLY) how they said.

  Went straight into the BIOS, was able to make changes. System seems to work fine. It is very important that you read all of this guide and be absolutely sure that you have the good BIOS before updating. Thanks for the help Dave!

• Satellite M505-s4972 - error - not enough space in runtime area

  Hello..

  I have a complex problem I'm tierd to solve
  When I opened my laptop I see logo then the screen

  

  I press f1 but not do anything...

  My loptop is Satellite M505-s4972
  Please help me solve this problem

  Please help me

• Problem with m230: not enough space for music DB. Please free 8 MB.

  OK, so. Hi, I'm new in this forum.

  Then.  I wanted to listen to music. SanDisk initialize arrived, then the 512 MB Sansa m230 and then the error:

  Not enough space for music DB. Please free 8 MB.

  And then you can see: no files 0/0. And the battery is fully charged. I thought that the...

  So I decided to connect m230 to my computer. First initialization, then the error came, had to wait a bit and then... the Sansa screen shows:

  USB connected MTP (and this popped into my computer: http://i30.tinypic.com/2i9jo82.png)

  Then. I open Sansa m230 in my computer and the folder that I saw was: RECORDING

  Well... I'm sure many of you could suggest me to format or reset. But... There is a problem:

  Where is the format button? (http://i31.tinypic.com/dvoky9.png)

  Then. I tried to format it in computer management. Device Manager > portable devices >
  Sansa m230. But... where is the format? (http://i31.tinypic.com/10x7q06.png)

  I went through a few topics, and someone suggested to format under removable storage, but there is no m230.

  Then I thought that I try the FirmWare update. But... the error popped up:

  The following error occurred: your device is in MTP mode. It can only be updated in MSC mode. Please disconnect your device and switch to MSC mode if you want to check the updates.

  But good... How can I change the mode MSC, coz... If I press the menu button on my m230, always pops up an error:

  Not enough space for music DB. Please free 8 MB. I can't do nothing in the menus. Aaand by the way, I have this player mp3 more than a year, so there is no guarantee or something for me I guess.

  Then. is there a way to do the hard reset or something? Is there a way to fix my m230? Feel free to ask me questions. I would be very happy if you answer.

  Aaand... Sorry for my English. I'm not from English speaking countries

  All the best,

  MagicIsland

  Hello MagicIsland, you may need to format your device, but it will delete everything on your player to try to see if you can always save the files when you connect your device by following these steps.

  http://KB.SanDisk.com/app/answers/detail/A_ID/1/kW/not%20enough%20space%20For%20Music%20dB%20error%20For%20m200/r_id/101834

  hope this work

• Satellite U500 - problem with the cooling system has been detected

  I have a Toshiba Satellite U 500 series, and I just got a message saying "a problem with the cooling system has been detected. Please turn off the power immediately and return it to service.
  Before that, I would like to know if anyone has had this problem and if there is a software solution?
  HIERARCHICAL

  Check HERE to see if anyone else had this problem in the past.

• Can not backup on USB drive, says that there is not enough space, but there are many

  I was able to save only once.  the total size was about 4.2 billion.  Now XP doesn't let me put anything on the drive flash 8 bigger than 4,2 g. I tried to crush, deletion, reformatting, renaming - you name it.  I can put large files on the flash drive with other computers, so there must be something done XP.  In properties, it shows a lot of space, but I still get the full message of media

  Well even if you have too many files, size does not matter in the folder root of the USB then
  You can not copy more to it... try to reduce the number of files in the root folder. Try to copy everything
  the files on your hard drive and remove it from the USB and try to copy your file to it. Rob - bicycle - Mark Twain said it is good.

• on the backup, I saved D recovery and it stopped due to 'not enough space. / have I saved in the wrong place?

  I backed up my computer and it went to recovery D but it has stopped backup because of the "not enough space" How can I handle this?  I'm new on this.

  I backed up my computer and it went to recovery D but it has stopped backup because of the "not enough space" How can I handle this?  I'm new on this.

  dodieZONAKIS DDS,

  Your question [on backup, I saved the D collection and he stopped due to 'not enough space.] [/ have I saved in the wrong place?] (<-- that="" is="" a="" link="" you="" may="" click="" on="" to="" get="" back="" to="" your="" original="" question)="" has="" been="" marked="" as="" answered,="" only="" you="" did="" not="" mark="" it="" as="" such="">Rob.C a.]

  I feel compelled to ask whether and how you solved your problem?

  The marked answer * not * have one you used and for the benefit of those who might ask the same question in the future it is better the original poster mark their own answers, in my opinion.

  If you feel that your issue has been marked as answered by mistake (the answer does not match your need or your fix) then please, deselect as soon as POSSIBLE. I am including instructions on how:

  You can go to the answer and click on the following to stand out as a response.

  

  If you are able, please go back to your original question and that everyone knows how you solved your problem, if you have and mark the answers correctly. This initiative will help to close the question properly or help us to help you if you still need help.

  Thank you!

• Trying to extend the c drive with space unallocated in diskpart.exe - I get the message that there is not enough space. what I am doing wrong?

  DiskPart.exe help - not enough space - I have more than 5 GB of unallocated space. trying to expand the C: drive

  Hello mark_kman,

  Thank you for visiting the Microsoft answers community.

  It sounds as if you have multiple partitions. Disk management and DiskPart extends the volume with a focus on the next contiguous unallocated space. For basic volumes, the unallocated space must be on the drive and must follow (have a plu sector offset number than) the partition with focus.

  If you are looking at disk management, this means that, if you look at your partition C: the unallocated space MUST be located directly to the right of the C: partition. If you have another partition between the two, you will be allowed to extend the partition directly to the left of the unallocated space.

  This could be a work around, if you have C: and D: and have files on D: but have more space.

  -D: shrink to create just enough unallocated space to store your files located on D:.
  -Create a new partition with unallocated space to move your files.
  -Move your D: files to your new partition.
  -Now, to delete the D: partition

  This creates unallocated space between your C: partition and the new partition that you created to move your files.

  -Now right click on your C: partition and extend as usual.

  Hope this helps
  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My serial number does not work he begins with the letters.

  My serial number does not work. It begins with the letters.

  [NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  This isn't a serial number to activate an Adobe product.  Serial numbers for Adobe products have only numbers, 24 of them in 6 sets of 4.  If you happen to find the serial number to be sure never publicly share since anyone can take and use it.   Find the serial number of your product Adobe quickly

• 702 Installer fails with not enough space in / tmp

  Trying to install coldfusion702 on solaris. Fails to complain about not enough space in / tmp (I got 10 GB). Tried to download the file again (assuming that possible corruption). Tried to place somewhere else in the tmp setting IATEMPDIR var. Nothing seems to help.
  
  Hope that someone has encountered something like this and can offer a solution. Maybe I'm missing something or a package. In the result below, ' expr: non-numeric argument ' caught my attention - I have the feeling that the script fails to the analysis of output of the df command.
  
  Thank you
  Henry
  -command line output-
  ./ColdFusion-702-sol.bin
  Preparing to install...
  WARNING: / tmp has insufficient disk space!
  Attempt to use/export/home/username for install base and tmp dir.
  expr: non-numeric argument
  
  CAVEAT! The amount of disk/tmp space required to perform the
  This facility is superior to what is available. Please
  release at least 0 kilobyte in / tmp and try this
  Setup again. You can also set the environment IATEMPDIR
  variable to a directory on a partition to free enough disk
  disk space. To set the variable enter one of the following
  commands at the prompt of UNIX before running this command line
  Once again the installer:
  

  Just in case where someone else encounters this problem, here is the solution, my colleague helped me to understand.

  install the script analysis through the output of the command df to calculate the space in / tmp or any other temporary location for the installation files. If you have a large amount of space allocated to the/tmp (on solaris, it would be 5 GB or more) the output will look like this:
  / tmp (swap): 19773408 blocks 400226 files
  Note that there is no space between: and the size, the installation script is looking for the 4th field, which is in this case the word 'blocks' which is obviously false.

  To work around it, we have created a temporary script with filename "df" which replaces the df command:
  #! / bin/sh
  / usr/sbin/DF | tr ":" " "
  and the PATH has changed to have this temporary location of script at the beginning. This allowed the installer to run as it simply replaces: with space.

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• HP Jet x 360: not enough space for the full Windows 10 upgrade

  Just got a HP x 360 for my granddaughter stream.  Indicates its eligible for the upgrade of Windows 10.  When I try to install it through the process, but before it ends and the error comes up saying not enough space. I have to add memory and if so, how.

  Monkey,

  The computer may be running out of physical space required for migration instead of memory needed to actually to crunch the numbers and run the migration program.

  The migration process uses more than 10 GB of space on your computer.

  Please take a look on the following document, including the important notes section.

  Specifications for Windows 10

  Excerpt:

  • Latest OS:

    Make sure you run the latest version of Windows 7 SP1 or Windows Update 8.1.

    Don't know what version you use? Click here to find out. Need to download the latest version? Click here for Windows 7 SP1 or Windows Update 8.1.

  • Processor:

    1 gigahertz (GHz) processor or more fast or SoC

  • RAM:

    1 gigabyte (GB) for 32-bit or 2 GB for 64-bit

  • Hard disk space:

    16 GB for 32-bit OS 20 GB for 64-bit operating system

  • Graphics card:

    DirectX 9 or later version with WDDM 1.0 driver

  • Display:

    800 x 600

• We try to upgrade Vista Home Basic on an Acer Windows 7 but cannot because there is not enough space on the hard drive.

  We try to upgrade Vista Home Basic on an Acer Windows 7, but does not because there is not enough space on the hard drive C. I have another drive that is empty, hard drive called D data and will not go to it. What I can do. I just spent $ 125 for this upgrade.  Thank you

  original title: try to upgrade to Windows 7

  Hello

  you are posting in the wrong forums

  These are some Vista Forums

  You can read this information to see if your machine is compatibile Windows 7 and repost in the correct Windows 7 forum (link below)

  so eager to upgrade to Windows 7, it will depend on if the manufacturer of your computer/laptop has windows 7 drivers available for your computer/laptop as to whether Windows 7 will work properly on your machine

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• oracle.as.install.engine.exception.LogInitializeException: not enough space to create the log files in the location specified in the inventory. Create a space under the null specified inventory or to point to a different directory

  Hello

  I have installed:

  -(Oracle Linux) OL 6.6

  121 GB HD

  5.0 GB RAM

  -JDK-7u80-EA-bin-b05-Linux-x64-20_jan_2015.tar.gz (Java)

  -Fmw_12.1.3.0.0_infrastructure.jar (infrastructure)

  -Fmw_12.1.3.0.0_ohs_linux64.bin (SST)

  I try to install OBIEE, I unzip these files:

  -bi_linux_x86_111170_64_disk1_1of2.zip

  -bi_linux_x86_111170_64_disk1_2of2.zip

  -bi_linux_x86_111170_64_disk2_1of2.zip

  -bi_linux_x86_111170_64_disk2_2of2.zip

  -bi_linux_x86_111170_64_disk3.zip

  I run/home/oracle/OBIEE/Disk1/runInslaller and open the screen to select the oraInventory directory, when I click OK, the error message appears (see image below):

  

  [oracle@localhost Disk1] $. / runInstaller

  Iniciando Universal Oracle install...

  Espaço Verificando Temp: deve ser superior a 1536 MB.   Passado Reais 36602 MB

  Verificando swap Espaço: deve ser superior a 500 MB.   Passado Reais 2553 MB

  Verificando monitor: deve ser configurado para exibir pelo menos 256 cores.    Reais 16777216 Passado

  2nd para iniciar o Oracle Universal Installer from/tmp/OraInstall2015-09-13_08-13-50 h Aguarde... [oracle@localhost Disk1] $ 13/09 / 2015 20:13:53 oracle.as.install.bi.util.ConsumerUIProperties getCustomPropertiesFilename

  INFO: Using a custom UI properties of the oracle/as/install/bi/config/consumer-ui.properties file

  [ERROR]: error initializing log values

  oracle.as.install.engine.exception.LogInitializeException: Espaço insuficiente para criar os log archives na Localização address para o inventario. Espaço shouts ob o inventario especificado/home/oracle/oraInventory UO aponte para outro inventario

  to oracle.as.install.engine.logging.EngineLogHelper. < init > (EngineLogHelper.java:65)

  at oracle.as.install.engine.logging.EngineLogHelper.initialize(EngineLogHelper.java:192)

  to oracle.as.install.engine.InstallEngine. < init > (InstallEngine.java:135)

  to oracle.as.install.engine.InstallEngine. < clinit > (InstallEngine.java:130)

  at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:603)

  In English:

  oracle.as.install.engine.exception.LogInitializeException: not enough space to create the log files in the location specified in the inventory. Create a space under the null specified inventory or to point to a different directory

  What can be?

  Well, you very probably not a lot of space on the left under/Home.

  You can move to another location that is located on/home/oracle/orInventory the / partitioning of the partition where you probably have more space left if you used the default value.

  For example, as a root user:

  mkdir/U01

  MV/home/oracle/oraInventory/U01

  Update /etc/oraInst.loc and replace

  inventory_loc = / home/oracle/oraInventory

  with

  inventory_loc = / u01/oraInventory

• B2496824 Player 7.1 + Win 10 (split volume) error: not enough space on the disk

  Hello!

  I have the following configuration:

  Host: Windows 7 x 64 professional

  Host: Samsung 840 EVO 240 GB SSD with 48 GB of free

  Comments: Overview of Windows 10

  Comments: 60 GB VMDK, spread across 30 x 2 GB vmdk, which are NOT previously affected

  Description of the problem:

  I do upgrade from Windows in the Win10 system, and then at one point I had a warning of VMware Player, which is not accessible VMDK #009

  It's the NEWSPAPER, which States that vmdk #009 running out of space... which is very strange, considdering that I have 40 GB free in the guest OS and 48 GB free in the HOME... and the VMDK is an expansion of volume

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: MsgQuestion: msg.vmxaiomgr.retrycontabort.rudeunplug response = 2

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: DISKLIB-LIB: RWv failed ioId: #46815 (13) (13).

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: DISK: drive e/s on scsi0:0 failed: there is not enough space on the file system for the selected operation (13)

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: # dumping contents of iov #.

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: WRITE

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: startSector = 37601304

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: numSectors = 8

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: numBytes = 4096

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: numEntries = 1

  2015 04-15 T 10: 47:20.827 + 02:00 | VMX | I120: entries [0] = F53A8000 / 4096

  2015 04-15 T 10: 47:20.841 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.841 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.841 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.841 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.844 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.844 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.844 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.845 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.846 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.846 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.846 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.846 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.848 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.848 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.848 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.848 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.850 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.850 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.850 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.850 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  2015 04-15 T 10: 47:20.851 + 02:00 | VMX | I120: VMXAIOMGR: retry on write ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': there is not enough space on the disk.

  2015 04-15 T 10: 47:20.851 + 02:00 | VMX | I120: VMXAIOMGR: System: err = 700002 errCode = 112 freeSpace = 51699863552

  2015 04-15 T 10: 47:20.851 + 02:00 | VMX | I120: VMXAIOMGR: ' C:\Users\mkirk\Documents\Virtual Machines\Windows 10\Windows 10 - s009.vmdk ': writing s = 825058708480 n = 4096 = 1 IAF = 0

  2015 04-15 T 10: 47:20.851 + 02:00 | VMX | I120: VMXAIOMGR: v [0] = F53A9000:4096

  After copying VMDK #009 in a new file

  and after running the tool of restoration Performance of Samsung,

  Windows 10 VM is now back in business!