Re: Screen color configuration for Qosmio F50-108

Similar Questions

• Need to WIn8.1 webcam driver for Qosmio F50-108

  Hi all!
  I'm looking for Toshiba Qosmio F50 - 108 the camera driver. I have windows 8.1.

  Someone know where I can find it?

  As much as I know Toshiba does not have webcam driver for Win8/Win8.1.
  Operating system uses the standard Microsoft driver.

  I think this Qosmio is old enough laptop model. But in general, I don't know if your Qosmio is supported for Win8/Win8.1 or not?

• Qosmio F50-108 - rustling sound in the speakers for a second or two

  I recently purchased Toshiba Qosmio F50-108. I am very satisfied; the only thing that bothers me is the rustling sound in the speakers. The rustling sound appears only occasionally on higher volume (system volume) and Winamp or WMP volume and lasts for a second or two. It is not such a problem bi but it's embarrassing to hear the rustling all the few minutes when listening to music.

  Harman/Kardon speakers have also some reputation so I t think that rustling is normal. If someone else got the same problem with speakers, please answer.

  Well, what to say, I think that it s a normal question if you want to hear music on the volume level high. Almost all the speakers would be rustle a little bit some time if you increase the volume to maximum.

  But if you think it's a hardware problem, then you must contact the Toshiba ASP in your country for a control.

  Welcome them

• Weird problem with Qosmio F50-108 - power power button

  Hello

  I have strange problem with button / stop on Toshiba Qosmio F50-108 - pressing the power button won't start the computer. Now, the computer starts only when I press the first button to the right of the power button (Toshiba button Support).

  It's as if the buttons have been activated. The power button is still able to stop the laptop or put on standby when you press on, but it no longer starts. Recently, I had my laptop on the service, but I put t know if it has been opened or not. Is it possible that the problem is hardware related or is - this serious just of system configuration? It would help if I Flash the BIOS? Otherwise I will take to the service again.

  Thank you for the answers!

  Hello

  If the laptop was on the service, please call them and explain the situation. Start button / stop is only the button that can be used for the specification of switching on and, as far as I know, it cannot be changed with certain parameters.

  I assume that there must be a contact problem.

  Call and see what they say on this subject.

• TOSHIBA Power Saver for Qosmio F50?

  I am owner of a Qosmio F50-108 and I can't seem to find Power Saver utility from TOSHIBA.

  What is the same thing that the utility options of power on the control panel? I've seen screenshots of power saver utility from Toshiba which is supposed to be delivered pre-installed on their laptops, but the one I saw was on a Qosmio G10.

  The series F50 there as well? If Yes, where can I find it?

  Hello!

  As far as I know that the Qosmio F50 comes with Windows Vista and not XP.

  TOSHIBA Power Saver is only available for Windows XP because Vista has the same functions as energy savings. The energy saving features are now an integral part of Vista.

  I've created an interesting article here in the forum for you:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=142522

  Good bye

• Qosmio F50 - 108 b - issue of upgrade hardware

  Hello!

  I have the Qosmio F50-108 b. I am considering buying the new processor for my pm45 chipset, but I can't find information about my support for the cpu bios. I stopped the Q9100... its very very fast. The chipset support, but what the BIOS? I think that to give a chance to the ddr3 memory, so I buy two Privateers 4 GB ddr3 1333, which I suppose to work normally on 1066... Maybe a little more if I can clock the FSB: P.

  BTW I have successfully recorded video (9700M GTS) of 540 clock 1325 shader 799 mhz to 690 memory memory clock 1700 shader 1040 Central. Just be sure to clean your computer from inside well so that the heat will not stop you: P

  You know more about its use at these frequencies? I hope the laptop takes care of everything? Advice please on future updates to this subject :)

  > The chipset support, but what about the BIOS?

  This is not mentioned on any page of Toshiba which I could find in the internet ;(
  But I guess you would have a good chance using a CPU that is taken in charge by the chipset, but it's my personal opinion

  In addition, I found this doc from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

• Qosmio F50-108 - monitor flicker

  Hello! I have a Qosmio F50-108, and recently, I noticed that the screen flickers.

  It looks like a neon sign that is on out. Fortunately, which happened yet, but I'm really afraid that my monitor can suddenly go blank one day. No matter which option to choose, and whether or not its clogged, it still happens.

  Has anyone ever encountered this problem? Help.

  You have this problem on the internal or external screen?
  If a display is flashing, the screen itself is faulty, the FL tube is the cause of the error

  I think your laptop is relatively new, so I would go to an ASP. They can check your laptop, to order parts and change if it of necessary.

• Cannot install Windows XP on the Qosmio F50-108

  I got the Qosmio F50-108 with Vista.

  I dislike Vista so I tried to install XP.
  Unfrtunatelly, I get a BSOD every time XP takes over for the first time (startup). Usually, when there is a problem of sata, XP tells you while there's no HARD drive, but I do not get this message, I get a BSOD.
  I don't know why there is no support for XP in fact I know that Microsoft paid toshiba to stop supporting Windows XP.

  Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.

  I know that there is a possibility, I know that an update of the bios might help, but toshiba does not.
  Dear Sirs to Toshiba, I know you know what I have to do in order to get XP running on a Toshiba computer, so please, help me.

  Hi guys

  You can install XP on each laptop Toshiba. But you knew how! : D

  Your Windows XP CD must contain the SP2. This is important because the new laptops no matter which manufacturer need SP2 patches due to some hardware compatibility issues!
  Without the SP2, you will receive a BSOD!

  Then, the new notebooks support SATA drives hard and new SATA controllers!
  Windows XP and Vista operating systems do not contain the SATA drivers, and therefore you must include first before running the installer of the OS.
  Or you can disable the SATA in the BIOS. You will need to switch from AHCI to compatibility mode.

  Then, you must install the XP window successfully.

  So finally, I must say that I really don't understand these comments like this:
  > Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.
  OK, I see you're frustrated because you cannot install the operating system, but he must know that this is not a problem of laptop, but it is only a case or a knowledge!
  So maybe you should learn more about new technologies and you'll know how things are working. ;)

  To all here-> greetings & peace;)

• I could use a second HDD in my Qosmio F50-108

  I could put a second HDD in my Qosmio F50-108...

  What should I be careful?

  What HARD drive to buy?

  Thank you...

  Post edited by: dpasinis

  I doubt that this is possible.

  As I m not wrong not the F50-108 belongs to the series of PQF55E and verification of this series of models, I found and the info that this laptop supports a 320 GB (5400 RPM) SATA HDD but it doesn t support the second HDD.

  However, I would recommend checking the bottom of the unit. Is there a possibility for an upgrade of the HARD drive then you should find a second HARD drive with a SATA HDD connector Bay.

  Concerning

• Qosmio F50-108 - question of front operation panel

  Hello, I have a qosmio F50-108 and the front panel does not work me, I think I uninstall a program. Please link to the driver. Thanks Astier

  Sorry for my bad English

  Hi Astier

  Sorry, but I don't understand what you are meaning exactly façade?
  Do you mean like the Toshiba control buttons (play, pause, stop, etc.)

  If you are which means these buttons and if you deleted a driver that controls these buttons then a solution should be easy.

  First of al, you should try to define the operating system at the beginning of time until you have deleted this driver. To do this you must use the system restore utility.

  Second, if the procedure described above does not work, try reinstalling the VAP (value added package).

• Need some guide to the Qosmio F50-108

  Hello

  I was wondering if I can get a guide how on my qosmio F50-108... my fan makes a big noise really.
  I want to check what is going on... my warranty has expired 4 months ago... So can I get a guide please?

  Problem is that the "Maintenance manuals" are not a public document and cannot be downloaded.
  You want to disassemble your laptop and clen it upward?

• Qosmio F50-108: How do I use the NVIDIA SLI technology

  I own a laptop Qosmio F50-108 and it has a Nvidia GeForce 9700 M GTS graphics card that supports NVIDIA Sli technology.

  How to use this feature?

  Hello

  AFAIK your Qosmio model was equipped with card NVIDIA GeForce 9700 GTS * M * graphics chip.
  It should support the PureVideo HD, HybridPower, etc.

  The HybridPower is a switch between performance or battery life.
  If you need more graphics power, you can turn it on and if the graphic power is not needed, you could disable to extend the battery working time.

  AFAIK the HybridPower can be enabled in Vista manually Power Options in Vista and in according to some gossip in the next time that the nVidia driver should control this function automatically. But these are only a few gossip that I found on various Web sites.

  Maybe this can be useful:
  http://HotHardware.com/articles/NVIDIA_Hybrid_SLI_and_nForce_700a_Chipsets/

  Big names

• What is the display screen color recommended for fine arts

  I need to send pictures of my works so, what color recommended for my screen?

  Each monitor will interpret according to local settings of RGB. LCD monitor displays colors in this way, by combination of red, green and blue LEDS (light emitting diodes). It is an additive color model in which Red, green and blue are added together in various ways to reproduce a wide range of colors.

  You have no control over other peoples screens settings

  Make it look good on your is the best you can do.

  If you want to print CMYK is a subtractive color model, used in color printing, which you have control of the finished product.

• Question of updating the BIOS for Qosmio F50 - 10 k

  Hiya:

  + This Bios update adds functionality to your system. +
  + (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard. +
  "+ When the computer turns on, the BIOS is launched to perform various functions to start). +

  + For detailed updated information, please refer to Toshiba-setting to update BIOS Information +.

  + Toshiba - 2.00 - WIN32 Qosmio F50 +.

  It will work on toshiba F50 - 10 k, Windows xp, sp 3?

  [Notebook-> Qosmio-Qosmio series > F-> Qosmio F50 | http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU]

  Post edited by: kirekk

  Qosmio F50 - 10 k belongs to the series of PQF55E.
  If you want to update the BIOS, you will need to use the BIOS exactly for the F50 PQF55E series.

  The European driver Toshiba page provides BIOS for Vista 32-bit and 64-bit OS.
  But this does not mean that you cannot use the Win XP

  I think you can use the Win XP but the fact is that the BIOS has been optimized for Vista and not XP

  The BIOS update should work also on XP, but in some rare cases the update cannot be performed and in this case, you will need to the Toshiba preinstalled the operating system in order to update the BIOS

• Re: How to reconfigure the remote control for Qosmio F50?

  Hello
  I have a Qosmio F50, which came with a standard remote control for applications like media library etc, how do I reconfigure the keys to do exactly what I want it to do?

  For example the button power on the remote control to completely stop the machine instead of standby

  Thank you
  Dan

  Hello Dan

  Why do you think something like this is possible? What is this described in s operating manuals.
  If something like this can be done, it must be described in the manuals?

  In 10 years Toshiba has offered several different notebooks with the remote, but something like this was never possible and remote control buttons were always with defined function.
  You have some really cool ideas.