Re: Sending file failed
I am trying to hook my LG to my N97 netbook. Nothing spectacular to send files. I have the Bluetooth Stack (T) v.6.40.02 with windows XP.
I did (right-click on the system tray icon Bluetooth-> Options-> Security-> Custom Level-> Mode: level of link applied security) which provided a way to transfer file from my N97 to my netbook, but not a file from my netbook to my N97. It says: failed to send file.
Is there a size limit?
Thanks in advance.
You connect the phone using the PC Suite mode or mass storage mode?
I use the USB cable to transfer files to and from my N97, there is no file limit. I have not tried many bluetooth...
The USB cable works ok?
Sending files has failed when sending from a mobile phone to the computer via bluetooth. But vice versa is possible.
OS: Win XP Prof
Bluetooth device: Widcomm connected to the desktop computer
Thank you & best regards
Hey Ma U,.
Follow the steps in the article.
How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2
I tried power off to solve a problem with the Messages/iChat for 6 months now and I hope the Apple community might have a solution. We have an office with a mixture of Mac under OS X (based on capabilities) 10.6.8 (off 10), 10.10.5 (2 for those who hate the model) and 10.11.4 (2). We use Hello messages to send text messages, video chat and send small files (usually images) internally around the office. About 6 months ago Messages/iChat lost the ability to send files. Everything works fine (except General bugs of windows mobile / endangered and buddies on the machines of Yosemite/model). On the senders end you get no notification that the transfer has failed, or that you get a small 'I' icon in the window of conversations that draw attention to the failure. The same thing in the 'File transfer' window, sometimes the file will be marked as 'sent', or 'fail', in both cases, the receiver sees the transfer as it is 'impossible' or it crashes with a progress bar that changes to 'fail' if interact you with the download arrow or double-click on the file icon.
Various forums to suggest solutions, that everything I tried:
- Quit and restart Messages.
- Restart the computer.
- Deleting of plist.
- Make sure UPnP is enabled on the router.
- Make sure UPnP is not enabled on the router (learned to love these weird problems, everyone has a different idea)!
- Ensure ports 443 (Messages), 5190 (UDP for Messages), 5297, 5298 (UDP Hello) and 5298 (TCP Hello) are all open.
- Compress images.
- Force quit "matches" in the activity monitor.
- Ensuring that no one is Little Snitch active.
- Ensuring that there is no firewall on.
- Ensuring that user names are not too long (there was a suggestion Hello has an internal deadline that could result in names are identical coupe).
- Make sure that OS X is updated (this persisted for several updates now).
There is a guy named Ralph Johns (UK) on Apple's Support forums, which has been troubleshooting this kind of problem with iChat/Messages with various posters since at least 2011. Seems to know his stuff, but has not been able to find a solution for everyone. Posters have tried swapping routers, used wireless instead of ethernet (or vice versa) and even two bad guidance computers connected together via a simple switch, so I am not convinced that there is a network problem.
Anyone have any ideas?
I've done it since 2004 in fact.
Ensure ports 443 (Messages), 5190 (UDP for Messages), 5297, 5298 (UDP Hello) and 5298 (TCP Hello) are all open.
IMessages Login using port 443 (made the AIM Login today and Yahoo if you have configured the account)
Swaps the GOAL to use port 5190 (UDP when this file transfers).
The other three ports lists are listed as being necessary by Hello but use Little Snitch myself I was never able to prove that a similar thing on behalf of the GOAL and Exchange port during the basic move IM chat to those containing photos of cats.
Ensuring that no one is Little Snitch active.
Little Snitch will block (if you tell) the processes that you cannot associate with Messages as such.
It's pop up you should see if you transfer files with the iMessages account. (Note the server and port).
Why they have put in place a different process instead of use the same AIM, Jabber and Hello use. It has a slightly different name.
I tried to send pictures on PURPOSE to my MacBook Pro that uses iChat 5.0.3
I have also tried to send using Hello from iMac MacBook Pro and cannot operate.
However the Hello from the MacBook Pro to the iMac strangely works.
The version of iChat says that the File Transfer window expected FRO me (in the iMac) to meet start sending in trying to use AIM.
However, the Chat window in iChat 5.x.x watch separately a message from AIM servers saying that the AIM Proxy did not work and try again and it make no changes to the file transfer window.
2nd attempt to use iChat 5.x.x Hello also failed.
It seems to be no reason why it fails.
Ensuring that user names are not too long (there was a suggestion Hello has an internal deadline that could result in names are identical coupe).
Hello items in the sidebar of finders tend to take the name of system preferences > sharing
The ID Hello buddy would then map My user on the name of the computer remote [email protected]
Possibly the naming conventions have changed over time, but I don't normally have questions (the MacBook Pro doesn't seem like spaces or apostrophes when I named it wherever the iMac running OS version much later when appointed allows them).
However as I had them connected should not be the issue.
Which can be a problem is to name them all Macintosh or the Admin according to the naming process, that you can use and if a Diskimage is used to make them all have the same applications and settings.
UPnP occurred as iChat 3 and 4 used so several ports you couldn't open them all in Port Forwarding set ups.
Video and Audio conversations only used 22 ports
GOAL was three
Hello supposed to use 3 in the Apple Documentation
Jabber claimed to need at least one, but was actually 2 to cover the SSL connections.
Two things that you don't mention that you have tried.
NVRAM (PRAM) reset How to reset NVRAM on your Mac - Apple Support
and a secure start
Repair permissions appeared in disk utility in El Capitan and was always decried as useful in many settings, while others swore by it.
Finally, you might want to watch and read and write permissions.
It has become much more complicated with some applications such as Messages can be sandbox which adds several layers of reading and writing of files you need also to have access to write even the .plists
I'd take a peek at this thread and useful (Orange) marked post-test and resolved green one if necessary.
The Original message is followed by the fixed one but one useful by that you should start is then displayed.
21:42 Thursday; July 21, 2016 iMac 2.5 Ghz i5 2011 (El Capitan)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
iPhone and iPad (2)
Hi, experts :)
I'll get straight to the point!
I have a toshiba satallite L755-16z for a month or two (New, with windows 7 64-bit)
and knows that it has BT and I guess that its 3.0
So I tried to connect the bluetooth with my phone & it paired very well!
but when I try to send files and from my phone, it says (connection) but fails to send it in the end. In addition, this problem is not just with my phone as I tried issuing and receiving to & from another phone, but always the same problem!
HOWEVER, I tried to turn the BT adapter off (right-click on the icon in the notification area and then turn off bluetooth adapter), start the application (bluetooth monitor) can send files & IT WORKS!
But this only happens for once just after the restart of bluetooth, so every time I want to send files, I have to turn off BT, then turn it on?
It is kind of unacceptable!
I tried Toshiba Bluetooth Stack, and he had the same problem. In addition, I didn't like the way it worked (style and all)... so I uninstalled & returned to the original version of BT in the pc.
I looked for answers to no luck & now I'm desperate for the answer!
Please anyone knows how to fix it, help me please? !
If my email is required: [[email protected]]
> HOWEVER, I tried to turn the BT adapter off (right-click on the icon in the notification area and then turn off bluetooth adapter), start the application (bluetooth monitor) can send files & IT WORKS! But this only happens for once just after the restart of bluetooth, so every time I want to send files, I have to turn off BT, then turn it on?
Usually the BT must be activated using the Fn + F8 key combination.
So remember that BT has been enabled using these buttons.
I have a Packard Bell Desk top and it says on the DVD RW CD tray. I am trying to send files to a disc, memorex cd - rw 16 x - 24 x but the computer tells me that the disk is not rewritreable. On the CD, it says it is.
I also tried to send stuff to s, DVD - RW, but this also fails.
Can anyone advise what I'm doing wrong
1. have you tried to burn a CD or DVD using any software programs built-in Windows like Windows Media Player or burning?
The following article you will help understand what format of CD or DVD does a use to burn the CD or DVD.
See Which CD or DVD format should I use?
Visit our Microsoft answers feedback Forum and let us know what you think.
Earlier this week, I made the change to a BB and overall I am very happy with it, but there is a thing that is annoying on the phone and despite my efforts and a lot of tinkering, I was not able to solve this problem, I'm looking for help.
I try to send files to other Bluetooth devices to my BB 8900 and I can't do work of t. strangely, I can send my BB files to other Bluetooth devices with no problems but I can't send things on my device.
I lived the articles (e.g. http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB04132&slic... )
but in vain.
In a nut shell, I enabled bluetooth on my camera, I made detectable and combined with other devices that I am trying to transfer files from, I went into options of the terminal for these devices and their confidence, and then I tried to send files.
If I send from another phone (LG viewty) or Nokia E61i, I get an error message indicating that "send failed".
If I send a computer that was paired, I select the file I want to send > right click > sent to > Bluetooth > other and select my BB8900 in the list of paired devices. At this point, the computer appears to try to send the file, but I am presented with an error message indicating "file transfer Service is not found on device BB8900."
Why is this? How do I am able to send files to my BB 8900 but not sent to it, and what can I do to solve this problem?
This problem is causing me a lot of grief that I have given on other phones, I need to transfer to my new BB, unfortunately I do not have a USB cable to one of the phones, so Bluetooth is the best alternative.
Please can someone help!
Thanks in advance,
OK, so after re-reading of this last KB article, I realized that I was a complete dunce!
I have now managed to successfullty receive pictures and audio files on my BB.
Thanks for your help!
When I go to the itunes store and download itunes for windows, download appears to move, but when you are finished, he said that the exe file failed to download. I have 3 pro surface, running windows 10
If you have trouble downloading the installation file from iTunes to the current address try; Uncheck the box "Keep me updated", clear the cache of your browser, change the settings of the blocker, a right-click or ctrl - click on the download button, using a different browser, or by using the direct links here.
See troubleshoot problems with iTunes for Windows updates if you have additional problems at the facility.
I got my laptop about a month and now needs to work bluetooth
I have a C50 Satellite - B - 14 d
Bluetooth is not receiving but sends end
help please someone.
I would suggest temporary disable the antivirus and firewall, then check the result.
If the problem persists, check if this problem occurs during the transfer of data with the help of different devices.
Search for "fsquirt" to the start screen.
The fsquirt is a Bluetooth File Transfer Wizard that allows users to transfer files between a computer and a device with Bluetooth.
Launch "fsquirt" and then if you want to send a file, choose "send files".
If you want to receive files, select "receiving files."
Can I send files to my computer, but just as soon as I turn on my bluetooth stack. I have the latest version of Toshiba and a Tecra 9100. If I turn on my bluetooth stack I must be quick at sending the files on my computer to my mobile. Within 30secs (approx) each, I can send as many files as I want.
But after 30secs it's too late - my mobile says it cannot associate unit. I must therefore keep go Bluetooth, Wi - Fi on my computer if I want to send a file on my computer and my bluetooth stack has been activated for more than 30secs.
It's quite embarrassing. Any help will be appreciated.
You can send files via bluetooth as long as it is switched on and active service. The only problem, you should see is a time out if you do not confirm the request on the receiver side within 30 seconds. This timeout is controlled by the Bluetooth chip.
So this time cannot be changed by software. The only solution for your problem would be to disable confirm the receive window. Then you can do this with the following:
Start "Bluetooth settings"-> Bluetooth-> Options...-> security-> custom level...
-> Bluetooth information interchange: check "display a confirmation message upon receipt through Push (OPP) of the object.
-> Object Push (OPP) security setting: check "perform authentication and encryption (server).
The last parameter is optional, but recommended as it requires once to enter an access key (e.g. 3248) laptop and mobile phone.
Not required for other assignments. This forbidden that any unknown person cannot send files without your awareness (as you know a confirmation window will appear no more) to your laptop.
After upgrading to a new one version (18.104.22.168) - could not find two of my beautiful button:
-"Share the screen.
In an earlier version, if I open a contact - in a single window: there is a button '+' - where can I choose send files or share my view of the screen.
But now - I see here only 3 of the icon:
-' video call '.
-' call '.
'Add people. '
That is what it is?
Why so much?
The "missing" buttons are here. Screen sharing option is not available in the event of actual call.
I have a question I am very curious, and I hope that someone could help me. So, about 4 months ago I sent a large number of files to a single person via Skype and he did not accept all of them (or denied), I guess that it just has not seen, we had some problems with Skype that day. And now, after a long period of time, I hear the sound of Skype to a file being refused to send and "orange" around his avatar, like the one you see when you receive a new message (but it wasn't). Now to my question: is it a kind of period that Skype has files not being not to send, and lets say, maybe after that time, it automatically it declines for the user, or is it absolutelly who finally refused it? This question may seem silly, but it's really important for me right now and I need to know.
Thanks in advance
Both worse, needs more help. Just found that Skype latest version automatically accepts and sends files if they are still available.
Unfortunately, since yesterday, I'm completely unable to do anything on Skype. I can't call, I can't IM, I can't send files, videos, contacts, etc and when I try to call, I can't quit never call. So I'm permanently stuck in a call now. I can't do everything in groups or just for a contact, etc. Skype is 100% broken for me and I can't do a thing in it. I can receive messages, but what is an instant messaging program if you can't send messages... Please fix this major issue soon because I do not want to be able to use Skype, however, it is I can't do anything about the program because it won't let me.
Bye and have a nice day.
If anyone happens to read this solution, it is almost the solution given by a representative of Microsoft technical support, however, "then go to Windows start and in the search/run box, type %temp%\skype and then press enter or click the OK button. Delete the DbTemp folder. "is an unnecessary step and can be avoided. Thank you for your help to solve this problem.
(Also, as you can see, even a very old, slow computer is able to run Skype and many other intensive programs (Java and Eclipse) simultaneously on Windows 10.
My hard drive in my dv7 ENVY dies for the second time in two years (it was under warranty last time and I was able to fix). I bought the hard drive same exact (Samsung, 1 TB), tested in BIOS, past everything. When I try to make the image recovery with the HP recovery discs I received the last time my hard drive died, I get an error then that 58% on two recovery disc that says:
Copy the file fails
From: d:\preload\base24. STORMWATER MANAGEMENT
To: c:\RM\Image\BASE24. STORMWATER MANAGEMENT
Press OK to retry.
I press OK and it does the same thing over and over again. People who questioned him on this same type of error seem to get anywhere here, but what choice do I have? The hard drive is the same size, same manufacturer, same model, it should have the question of reimage the system on a hard drive more small, right?
Am I just out of luck on that? So frustrated.
Let me welcome you on the HP forums!
I read your post on recovery issues and wanted to help.
Here is the link to the tool of creation of win8.1 media: installation media to create for Windows - 8.1 help Windows
Understand, however, you might encounter a problem installing using the media created from this tool.
You have a version of OEM HP of Win8 installed on your PC, and this means that the product key that is embedded in the motherboard UEFI firmware is OEM, not retail.
While the media created from this tool SHOULD be activated using this key, there is no guarantee he will do. If it is not the case, you can use this tool to recover your product key and try to enter it manually: Download Windows OEM Product Key Tool - MajorGeeks
IF it still does not work, then your only recourse would be to order a new set of recovery from HP discs.
You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update". If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
Or, if you prefer, you can do the same by contacting HP Customer Service:
If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
I'm a volunteer and I do not work for, or represent, HP.
If my post helped you, please click on the symbol of the thumbs-up to the left of the answer key to say thank you.
If my message solved your problem please click on "Accept as Solution" - to help others to find the solution.
I have tried to solve this problem for a month now and I'm at the end of my home.
I am now on my third set of recovery discs HP and all have the same problem. I insert disk 1 by following the instructions on the support forum. She's going through
Reformat the hard drive windows partition - tick
Copy of the files needed to restore the hard drive - tick
And immediately as ending, this window appears:
Copy the file fails
From: E:\PRELOAD\BASE. STORMWATER MANAGEMENT
To: C:\RM\Image\BASE. STORMWATER MANAGEMENT
Press OK to retry
Three series of drives have the same come.
What the hell is happening?
I'm so sick of this.
Read a few other posts with similar problems, but can't seem to find the solution. I don't have an external hard drive, I can use... only the laptop I'm trying to fix. (G6-1305sa)
Any help? It also doesn't help when the HP support is open on the phones until 5:30 from Monday to Friday. I'm at work so can't call. So frustrating...
Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6-1305sa Notebook and not able to restore Windows. If the HARD drive is faulty, this can cause the restoration should not go well. You can try to run a test of material. Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices. What is the original HARD drive? Have you replaced all other parts? Have you tried to do a clean install of Windows 7. Try running sfc/scannow would scan your system to find errors on the command line. You can get to the command prompt by clicking F11 at startup. You can see this Microsoft document on the system recovery options.
Hope this will help.
Replaced the bad drive HARD 750 GB with a HDD1TB, after installing the new HARD drive, inserted the recovery disc 1, and then asked for disc 2, and then @ 74% a box came up saying: copy the file fails. From: D:\PRELOAD\BASE22. Stormwater management at: Z:\RM\Image\BASE22. SWM press ok to try again, tried it, same message. I'm at the end of my rope with this PC. Help!
Because you got a bigger than the original HDD, it shouldn't be a problem.
In my opinion, the two most probable reasons for the problem are device faulty OR defective DVD player support
All the possible reasons for your problems with the recovery are:
-new HARD drive is defective [highly unlikely but should be checked, I know you did a test already but don't know if was a short or the complete.] If you have not yet made the disk HARD full component test, please do so.
-another component re. HARD drive is defective - bad connector or dirty parts [highly unlikely because it would have shown the problems when copying 1 disc DVD]
-defective recovery media [media you received is fake - not to your PC, collate (call) suppliers to probably get a new one in back of these you have]
or the DVD disc is scratched]
Remove the current DVD drive and check it for scratches as already suggested above. If the disc is scratched, you can try to repair the disk using an optical disc repair kit. These types of kits use special chemicals that is qui se lier bind to the surface of the disc, then fill scratches.
Clean the disc with a soft, clean water (very small amount) and the fabric. Wipe from the center of the disc to the outside edge. You can also use the cleaning disc kits or kits restore disk from your local computer store. These kits sometimes produce better results than a cloth and water.
-integrated DVD drive is defective [less likely... but you can test using the UEFI diagnostics hardware - component test , or with another media; you can try to clean 'the eye' player; if you have, you can try using a DVD external USB device instead of inside]
If you've tried everything but nothing works, I fear that you will need to bring your computer (or ship it) service - repair center authorized HP. If you don't know where such a Center, please contact HP support for help to find a. Here's more information:
I hope this helps.
Maybe you are looking for
I tried the suggestions recently put online, F10, Alt, view > toolbar > customize menu bar does not help. The add-on only I have is 29.0.1 by default.
Hi all I am looking for some advice,I'm far from being a computer whizz but know my turn well enough. I put my model below. No apparent reason, I have the black screen.The laptop was working fine yesterday. Windows has shut down the computer automati
I tried three times to update this article, but get the same error message: CODE 8024200d
Hi, Imy Pc will not open one of my CDs. What should I do?
Hi, im using ASPIRE V3 - 471 core i3, after the upgrade to windows 10 my touchpad to a zoom disappeared.