Re: Should what type of HARD drive I use to replace the 20 GB on Satellite 1400-103?

Similar Questions

• What type of HARD drive should I buy so he could keep in my aspire v3 772g?

  I have never handled parts for laptops before so I'm not really sure what type of HARD drive, I need, and I don't have to build a pc for the last 15 years, so much has changed lol

  If I could really need help, don't really care about ssd so I'll just for a normal HDD on May 1 TB and I you'd be grateful if someone me pointed in the right direction or even a recommendation

  and as I said in the topic, I got an Aspire V3 - 772G

  thnx

  Hello

  Here's the original HDD 1 TB for Aspire V3 - 772G (see links):

• What type of HARD drive I can get on my Satellite M30 154?

  Hi all

  can I get on my M30 154 this HARD drive model?
  WESTERN DIGITAL WD SCORPIO BLUE 80 GB WD800BEVE
  Its technical features are:

  + Quality tecniche +.
  + Capacity 80 GB PATA Interfaccia +.
  + Full stroke seek 21 ms Mtbf (mean time between failures) 550,000 ore +.
  + Velocità di rotation 5,400 rpm level di rumore ricerca 29 db +.
  + Average latency 5.5 ms Write time 13 ms + research
  + Read 12 ms track to track seek time + 2 ms access time
  + Di rumore in stand by 27 db buffer 8 MB level is +.
  + Velocità di trasmissione 133 Mbps +.

  Tanks a lot
  Kind regards
  Andrea

  I think that this old notebook to old IDE connector so please be sure of the former is back with a new.
  80 GB capacity will be OK.

  Best thing you can do is remove the old HDD and check if the HARD disk is connected directly or with the small adapter. M30 is old model laptop and I do not exactly remember what it looks like but, in general, I sure you can use this disc HARD m.

  In the worst cases send it back.

• What type of HARD drive I can use Satellite M70-337?

  Hello
  I want to upgrade my Satellite M70-337 with a 120 GB HARD drive. I have an external USB with a Toshiba MK-1234GAX 120 GB disk drive in it, I could share with my original 40 GB hitachi drive.
  Is this compatible with the laptop HARD drive toshiba, if not, what is the specification for the necessary HARD disk?

  Thanks for any help!
  Károly

  Hello

  I think what you need is a HARD drive with the SATA interface. I think that the 40 GB of HARD drive that was installed in your laptop supports a 5400 RPM.

  To my knowledge the external USB case supports an IDE hard drives. But you know, it is possible to s that your external HARD drive supports a SATA interface. In any case, you must check it before using this laptop computer HARD drive.

  In addition, there is a problem with the size of the HARD drive. It is a 120 GB HARD drive and, possibly, the BIOS does not recognize the HARD drive. I think you can use 40 GB, 60 GB, 80 GB and 100 GB hard drives but I'm not sure about the 120 GB.

  But you can test it.

• What type of hard drive I can add to my D4996t?

  All,

  I have a D4996t under Windows Vista Home Premium.

  I want to add a second hard drive - no bootable, only for documents, data play extra, etc..

  What kind of player does, SATA or IDE?  Don't want to order the wrong.  The last time I did at 13 with an old Micron.

  Thank you very much!

  Hello

  These will be the Sata cable to the hard drive of the images are given below as a guideline.

  

  

  

• What types of hard drives are compatible with my laptop HP Folio?

  I got a refurbished HP Folio 1029wm. I am statisified with its performance.

  It's just for some reason I want to put my hard drive in large capacity.

  I wonder if the mSATA SSD is my only option? Alternatives?

  As the SATA SSD, or hybrid hard drives, they will be possible to install on my laptop?

  Thank you!

  Hello

  You have no other choice, because no HARD drive, only for mSATA slot as you already don't know:

  Hard drive
  Spare part number description
  128 GB mSATA Solid State drive (SSD) 672616-001

  If you want more (capacity) HARD drive, please try this:

  http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=AD67F4A7A5CA7304

  Kind regards.

• What is the next step after the replacement of a hard drive corrupted/dead, I replaced the original HD.

  After realizing that my original on the G56 - 118 CA hard drive died, I bought a new 'Seagate' Momentus 320 G SATA 16 MB 7200 RPM drive.  However, after swapping, install the new disk and using the recovery disk, I create the purchase of the computer... still does not work.  What is my next step... Please help, I'm out of ideas, I copied the drivers on the HP site, but it does not help.  Anyone think of buying a HP recovery disk will do something?

  Hello

  If you are in the United States, click on the link below.

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  If you are in another part of the world, link below.

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

• Should what type of data store I use in VSphere Hypervisor

  Hello

  I'm very new to VMWare VSphere Hypervisor, I downloaded the free version of VSphere Hypervisor ESXi 4.1 and began assessing the same thing on my HP DL360 G6 server.

  I installed VSphere Hypervisor ESXi 4.1 on my HP DL 360 G6 server. I configured everything that is possible, but I'm really confused to choose the type of data store. My HP Server has 500 GB SAS hard drive.

  Kind regards

  Naushad Khan.

  Take a look at the HP Quickspecs for your HP Server

  from: http://h18000.www1.hp.com/products/quickspecs/13235_na/13235_na.html

  Battery HP series P with 512 MB Backed Write Cache upgrade	462967 B21
  HP 1 GB Flash backup Cache NOTE: Support on the Smart Array P410i controller only.	534562 B21

  Doble check if one of these two options is included in your server (assuming you have the P410i controller).

  André

• WHAT TYPE OF HARD DRIVE DOES TAKE TO THE OPTIPLEX 32O!

  It's the dumbest thing in the world, but I can't find the answer anywhere on this site!

  
  

• What type of input parameter is used according to the SUM?

  Hello world
  As we know sum is an oracle function preset. But what these guys here oracle used for input parameters. How did they do that?
  I mean, we can write this sum fuction as many ways as as mentioned below. Please give me some ideas how to do this.
  

  SELECT SUM(salary) as "Total Salary" FROM employees;
  
  SELECT SUM(DISTINCT salary) as "Total Salary" FROM employees;
  
  SELECT SUM(income - expenses) as "Net Income" FROM gl_transactions;
  
  SELECT SUM(sales * 0.10) as "Commission" FROM order_details;

  Kind regards
  BS2012

  BS2012 wrote:
  Hello world
  As we know sum is an oracle function preset. But what these guys here oracle used for input parameters. How did they do that?
  I mean, we can write this sum fuction as many ways as as mentioned below. Please give me some ideas how to do this.

  SELECT SUM(salary) as "Total Salary" FROM employees;
  
  SELECT SUM(DISTINCT salary) as "Total Salary" FROM employees;
  
  SELECT SUM(income - expenses) as "Net Income" FROM gl_transactions;
  
  SELECT SUM(sales * 0.10) as "Commission" FROM order_details;
  

  Kind regards
  BS2012

  As others have said, your question is not very clear.

  There are many aspects and angles to look at what you're asking.

  First of all, a level superior, the sum function simply takes a numeric value as it's argument, so all of these examples you gave have expressions that evaluate to a numeric value to be provided to the sum function. (As someone else already mentioned you can have non-numeric data types, just as long as they can be implicitly converted to a numeric value).

  A statement analysis and the point of view of enforcement, the content of the expression inside the brackets is evaluated before being passed to the sum function. It is not the function sum that he himself takes the expression and evaluates it. The sum function is expecting just a single numeric value.

  Internally, what the function sum is the case, is more than just a single... call function and return a value, because it faces several values being passed in the aggregation group. As such, it must have the ability to know if to start in short, is to accept several input values, so he can add them together, you know give up adding entries and pass the result to the back.

  If we write our own defined aggregate function (others have already provided a link to explain this) we can see what is happening internally. In the following example, we'll write a function defined by the user that multiplies the values rather than the amounts...

  create or replace type mul_type as object(
    val number,
    static function ODCIAggregateInitialize(sctx in out mul_type) return number,
    member function ODCIAggregateIterate(self in out mul_type, value in number) return number,
    member function ODCIAggregateTerminate(self in mul_type, returnvalue out number, flags in number) return number,
    member function ODCIAggregateMerge(self in out mul_type, ctx2 in mul_type) return number
    );
  /
  create or replace type body mul_type is
    static function ODCIAggregateInitialize(sctx in out mul_type) return number is
    begin
      sctx := mul_type(null);
      return ODCIConst.Success;
    end;
    member function ODCIAggregateIterate(self in out mul_type, value in number) return number is
    begin
      self.val := nvl(self.val,1) * value;
      return ODCIConst.Success;
    end;
    member function ODCIAggregateTerminate(self in mul_type, returnvalue out number, flags in number) return number is
    begin
      returnValue := self.val;
      return ODCIConst.Success;
    end;
    member function ODCIAggregateMerge(self in out mul_type, ctx2 in mul_type) return number is
    begin
      self.val := self.val * ctx2.val;
      return ODCIConst.Success;
    end;
  end;
  /
  create or replace function mul(input number) return number deterministic parallel_enable aggregate using mul_type;
  /
  

  For example, our user-defined aggregate function is based on a total object type.
  This object keeps a value ("val" in our example).
  It has an Initialize method, so when the SQL engine indicates that this is the beginning of an aggregation of values it can set its value to an initial value (in this case zero).
  It has an Iterate method, the SQL engine passes the values to it in the context of all grouped values, it can treat them (in our case it multiplies the value of entry with the value already there for this game of aggregations (and takes a value of 1 for the first iteration basis))
  She has a Terminate method, so when the SQL engine indicates that the global set of values is completed, it can return the result.
  The last method there is a merger and is mandatory, so that when the aggregation is done parallel assessment tool (for better performance internally), the results of these parallel executed aggregations can be combined (see http://docs.oracle.com/cd/E11882_01/appdev.112/e10765/ext_agg_ref.htm#ADDCI5132). As we are multiplying numbers, in our case, it is simply a case of the multiplication of one single result with each other.

  And to see that it works...

  SQL> with t as (select 2 as x from dual union all
    2             select 3 from dual union all
    3             select 4 from dual union all
    4             select 5 from dual)
    5  --
    6  select mul(x)
    7  from t;
  
      MUL(X)
  ----------
         120
  

• What size of HARD drive is compatible with my Satellite A100-771

  Hey guys,.

  is there a size limit of HDD for my A100-771?
  And what type of HARD drive I need? IDE or SATA?

  Thank you very much.
  Eathen.

  Hi dude

  From my experience, the Satellite A100 series was equipped with SATA drives.

  There should be a SATA HDD controller and you can use SATA 2.5 hard drives.

  I think that there isn t disc HARD size limit since the SATA controller is not limited to all special HARD drive sizes

  I think that most SATA HDD must be compatible

  Greetings

• Need info on the type of hard drive inside USB 1282E device - 1 12

  Hello

  I want to know what type of hard drive interface inside this external USB (ATA/IDE) device and which hard drive is hidden inside.

  Thank you
  Volker

  Hello Volker

  I wonder just who should have this info. This info is probably available in some non-public documents. You have this HARD drive?

  To be honest this number doesn't help much. Did you check in Google? No results at all.
  Are you sure the description of the HARD drive?

• Satellite Pro 4600 - type of hard drive

  What type of hard drive I have to use? If anyone has a link, so average post.

  Hello

  Well, you can use 10 GB and 20 GB hard drives.
  Google for this issue: MK1016GAP and MK2016GAP

  You will find lots of offers.

• What kind of hard drive is the V5 Aspire 122p-0643 have? SATA (I think?)

  I was wondering, cause I need to take out the hard drive and buy a hard drive enclosure. And to do this, I need to know what type of hard drive it a. probably SATA if

  Hello spottedstar1123,

  For Aspire V5 - 122P, you have 3 HARD drive models:

  SEAGATE - SATA 2	KH.32001.026	HDD.7mm.320GB.5K4.SATA.4k.LF
  TOSHIBA - SATA 2	KH.50004.011	HDD.7mm.500GB.5K4.SATA
  WD - SATA 3	KH.50008.044	HDD.7mm.500GB.5K4.SATA.8Mb

• Display for Satellite 1400-103 driver

  Hello

  I need a driver windows xp to a satellite 1400-103. I have searched the archives but does, can someone help. Thank you

  Hello

  I can't believe that.
  I checked the page European driver of Toshiba and looked in the Archive and found Satellite 1400-103 and the display drivers for Win2k and Win XP.

  Win XP driver is a Trident v 6.4022.

  Good bye