Re: TEAC DVD Player/Recorder has stopped working in my Satellite A200


TEAC CD/DVD drive no longer works, says the pilot is maybe damaged.
I tried all updates etc still does not.

Can anyone help?


If you use Vista try to fix this later in this document:

Tags: Toshiba

Similar Questions

  • "TosBtMng has stopped working" on my Satellite A200/H01

    I have a Satellite A200/H01 with Vista Home Premium 32 bit.
    A few days ago I started up this message at startup: "TosBtMng has stopped working" I have updated all the BT device drivers in Device Manager, but it did not help. I then installed the battery BlueTooth (v64000T_20090324_x32.exe), and this did not help, either. In fact, the error "TosBtMng has stopped working" message kept coming upward on several occasions, even when I tried to shut it down.

    Could someone help me please?
    I use BT to sync with my mobile phone (Nokia 6120 Classic) via PC Suite from Nokia worm. I was using the computer BT without problem for 18 months now, until last week.
    Thank you very much. Andrew

    Try the new Bluetooth stack v6.40.02

  • Cannot use DVD BD Player: WIN DVD MFC application has stopped working

    Tried to install my old version of WinDVD and failed and in the process perhaps accidentally deleted a file,
    now every time I try and use DVD BD drive I get the following message:

    "WIN DVD MFC application has stopped working"

    I tried to use restore point, but still get it, can anyone advise please?

    It will be interesting to know what model of laptop you have.
    Anyway, in my opinion, there is a software conflict. I guess players use even modules or plug-ins, and there is a conflict.

    I put t know what solution can be, but maybe you should remove both players, restart your laptop and make own BD drive in the hope that it will work properly.

  • Qosmio G30 - DVD-ROM drive has stopped working

    I have a Qosmio G30 age of 3 years and the DVD - ROM drive has stopped working.

    He still pulls in, but it will not read or burn discs.

    I received a quote of £360 Toshiba to adapt to a new one that seems generous.

    Anyone know where I could get it fixed cheaper than you?
    Or better yet... anyone know where I can I get it fixed?

    David Hutchinson

    This is not an answer to your question but can solve the problem if it is the same that I had.
    In my case, the drive tries to spin but it slips. Only the motor shaft rotates and the drive remains at low revolutions that were not even stationary.
    The problem was caused by the fact that the plastic part (black color) of the mechanism which engages the disc (CD or DVD) slips on the
    motor drive, axle and th couldn't do a full rotation or runs at the specified speed.
    The solution is to delete the article in plastic and put a small amount of super glue on the axle and then put it back.

    Where there is a similar issue, I hope that solve you it like I did.

  • A video shows the 'windows media player 2 has stopped working ". How can I fix it?

    When I click on the icon to play a video, "windows media player 2 has stopped working" is the only thing that appears. How can I fix it?
    I have to go into the program to find the video. I didn't know that there was a Media Player 2. Would it not be better to download another drive to use? If so which do you recommend?

    Hi Dave,.

    1. What is the format of the video you are trying to play?

    2 are you facing this problem only with a particular video file?

    3. have you made changes to your computer recently?

    I suggest to follow the link and run Microsoft fix - it and check if that helps.

    Playing video files crashes or blocking Internet Explorer - Windows

    I hope this helps.

  • Windows Media Player 12 has stopped working.

    Windows Media Player 12 has stopped working. When I select an audio track and click on the play button, a red X appears next to the title in the playlist. I uninstalled and reinstalled the player, but also update the drivers. Checking the properties through the device manager says that the device is working properly, but this clearly isn't. Any suggestions on how to solve this problem would be welcome. As a matter of interest, itunes has stopped working at the same time. And audio tracks play fine in RealPlayer.
    Thanks in advance


    Step 1: Launch the Media Player Troubleshooter

    Step 2: Rebuild the Media player library

    a. exit Windows Media Player.

    b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.

    c. Select all files in the folder and then click on Delete on the file menu.

    d. Note you don't have to remove the folders that are in this folder.

    e. restart Windows Media Player.

    Note Windows Media Player automatically rebuilds the database.

    Step 3: If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

    a. exit Windows Media Player.

    b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

    c. Select the Media Player folder, and then click on Delete on the file menu.

    d. restart Windows Media Player.

  • Adobe Flash Player error: has stopped working.

    Original title: Adobe Flash Player.

    I get a message from Adobe Flash Player 11.5 r502 has stopped working. What should I do to prevent this arise?


    Check with Support Adobe and their forums.

    Adobe - Support

    Adobe - communities

    Adobe - Forums


    How to uninstall the Adobe Flash Player plug-in and ActiveX control - download utility uninstall

    Troubleshoot Flash Player installation | Windows


    Download Revo Uninstaller - free Version - and use it to uninstall Flash


    Now try Flash:

    Download Flash Player (do not install the Google toolbar unless you really want to).


    Test of Shockwave and Flash players


    If there are still problems when running Flash Player:

    Troubleshooting drive stabiility and performance

    Flash Player Support Forums<-- more="" knowledgeable="" flash="" player="" help="" available="">

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Windows Media Player 11 has STOPPED WORKING... XP AND Vista problems

    I have a home network with computers XP and Vista.   Computer XP is Dell Dimension 4600.  Vista computer is HP Pavilion Slimline.

    On or about 6/10, WMP 11 on the Vista computer has stopped working properly.  Video will not play digital video (mpeg format), previously working but playing the audio from the file and the timer updates the video plays.

    Attempt to update the codecs (K-Lite).  Didn't help... now, the native multimedia player K-Lite is the same way.

    Deleting updates 6/10 and later versions.  No change.

    System restore of flowing it at 6/9, 6/5, 6/4.  Restoration is back with "unexpected error".  The logs show a NTFS corrupted and suggested chkdsk run.  Filled with chkdsk c: /R with NO ERRORS.

    Ran SFC/scannow on Vista machine.  He said "no violation of integrity.

    Today (6/14), WMP 11 on XP machine has stopped working.  Videos will be running, but are extremely hectic, like something, it's stealing time CPU; However, the system idle process is higher than 90%.

    What the hell is happening?

    EDIT TO add: I want to stress something else... Movie Maker on both machines still work.  Videos can be imported into and read correctly.

    I had things market... Finally.

    I have none of the above.  I do not have the installation diskettes (OEM on a computer HP... no disks provided with the machine, have only the recovery disks that I made when I configured the system).

    So until I went looking for a set of discs that I use, I did the following... and I * think * I know I could fix it, but I do not know...

    I have re installed the K-Lite codec pack... only of video codecs.  I essentially took the video installation by default EXCEPT... I turned off video acceleration.  Intel Express Chipset not allow me to disable hardware acceleration by using its own GUI and Windows Vista would not touch parameters of acceleration as Intel ordered to them.  Well, I suppose that K-Lite has been able to do what could not do Windows and Intel wouldn't let me do.

    Don't know if that was the fix or not, but everything works now.

  • "Configfree has stopped working" error on Satellite L300 Win7_32bit running

    Full text message * task status bar Menu ConfigFree has stopped working *.

    Whenever the modem USB (key Huawei E352 HSPA USB) connects this error. Running Win7 Ultimate 32 bit.

    Google search: some believe it is a virus, others believe that it is a matter of hardware/software.

    How should I do? Any ideas?

    Thank you

    It is not easy to help you because you use external third party material. I put t think ConfigFree is tested as intensely with all sorts of external devices.
    Why this may be just speculation. Still is it that ConfigFree is not necessary to run then I recommend to leave ConfigFree before starting to use your modem. How to fix? Good question. What you can do about it? Not much. Perhaps to find new version ConfigFree and reinstall in the hope, it will be OK. In my view, no more than that.

    I use ConfigFree constantly with LAN and WLAN networks, and there is no problem at all.

  • ConfigFree has stopped working error on Satellite L850-13R

    Can someone help me with this and also tell me about.

    Everytime I turn on my laptop I get notification message "Configfree has stopped working"... "try to get the solution on the internet... "and I don't know what is the problem and how to fix it.

    I have Toshiba Satellite L850-13R, i7, using Windows 7 Starter.
    Can someone tell me what is this error and how to fix it? and, also, my laptop is very slow since I got these notifications. I scanned and there are no threats found...

    Thank you in advance...

    I m not very well why the Utility of Toshiba ConfigFree has stopped working, but I can tell you how you can solve this problem.
    I think simple installation ConfigFree could solve this annoying problem.

    How the product?
    First download easy all the utility driver page ConfigFree Toshiba UE
    Please pay attention to the version. There is a ConfigFree utility for 32-bit system and 64-bit.

    After the ConfigFree utility has been downloaded, uninstall the previous software installed.
    In Control Panel-> programs & features, you should find the ConfigFree
    After the tool has been uninstalled, restart the laptop
    Then unizip the package downloaded and start the installation.
    Reboot once more.

    ... That's all :)

  • Bluetooth has stopped working on my Satellite P105-S9722

    I have a Satellite P105-S9722 and everything seems fine except the occasional extreme overheating it stops. In any case, my blutooth has stopped working.

    Here's what I've done so far:

    1 formatted, reinstalled clean (running the toshiba Vista business upgrade)
    2 tried to use the most recent bluetooth Vista drivers fron this site & Blutooth monitor 3 w / stack windows

    I tried several times without success. Here's what's happening.

    When I install toshiba stack, it is all the way to the grip and "install bluetooth driver". I get an error message on a USB device unknown who breaks down and will not be installed. It is under the TouchChip Fingerprint coprocessor. In addition, with the Bluetooth Monitor 3 installed, has no "BLUETOOTH" category in ther CP to set properties

    That's all. It hags just here and bogs of the bridge I have to restart the system.

    Any suggestions?

    Thanks in advance!

    If the laptop is overheated, you must remove the dust from the radiator. You can use a can of compressed air to blow off the dust.

    Have you tried to use the battery Microsoft Bluetooth standard instead? To use it, you must uninstall the Toshiba Bluetooth stack, then just install the Bluetooth screen

  • Webcam has stopped working on my Satellite L

    My Webcam has stopped working so I uninstalled and reinstalled the app and its still does not.

    What should I do?

    Any help would be great! Thanks :) x

    Occur when you
    What model of laptop do you have?
    What operating system do you use?
    Webcam application will start automatically with Windows OS?

    What happens when you click on the Photo/Video button?

  • Fan has stopped working on the satellite

    I've had the laptop for jusy 7 weeks and the fan has stopped working. It always seemed that he ran too to what looks like at full speed almost constantly, but now its stopped.

    I just tried to call the helpline and ended up leaving a message to be recalled. They work on Sunday?

    How long they tend to take to fix these things?


    I put t know 100% if they work on Sunday, but I presume that they don t
    However, can you please tell what camera do you use?

    I can t believe that if fans stopped working then the laptop should automatically stops or the CPU overheats! It is very dangerous because the laptop and the motherboard may cause damage.
    So if the fans don't turn you should not turn on the laptop.

    But maybe the cooling modules run only with the lower speed?
    This is not unusual. The BIOS and the energy-saving control the speed of the CPU and cooling modes. Fans should not run with maximum efficiency if the temperature does not increase.

  • CD-ROM/DVD-Rom drive has stopped working

    original title: READER of CD/DVD FAILURE

    My CD/DVD drive has suddenly stopped working.   I cannot now copy/burn discs or I can't play pre-recorded discs.   Can someone tell me what could have happened please?

    Hi Alan_6C,

    ·         Remember to make changes?

    You can check if this article helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

  • E DVD drive has stopped working on my Satellite L755D

    Earlier today the DVD player worked but stopped suddenly, on my Satellite L755D.

    Looks like he is reading the disc, but can't find anything. It is not the real disk as it works on another computer.

    Any ideas?
    Thank you

    Have you tested the feature with drives different (original CD, DVD)?

Maybe you are looking for

  • Video on Satellite L635-113 card Exchange

    Hello guys, Im asking. can I change my video card? because it did not work. :( SATELLITE L635-113-GRAPHICS CARD:type: ATI Mobility Radeon HD 5430 related HyperMemory technologymemory: 512 MB dedicated VRAM (total available graphics memory using Hyper

  • HP laptop 15: Start Hp logo appears

    Hello I try to recover my hp laptop on windows 10 and the recovery process was stop at 45% after this window is not the charge. When I turn on computer logo as hp laptop and load those then the screen has notthing. After that I reinstall new windoas

  • Upgrade space H9-1187 video card on motherboard

    I have a HP Pavilion h9-1187 windows 64 - bit pc with nvidia GeForce GT 530 by default.  I need to upgrade the video card, but this motherboard has only one of pci express 16 3.0 slot.  Almost all decent video cards require two slots.  I guess that m

  • error 1603 - windows xp professional

    Im trying to load a new printer/program - Dungeon fatal error 1603 -?I'm logged in as that administrator-, program has been activated to come through the firewall, but I get the same errorHelp

  • Active state does not not in the start menu

    HelloI'm trying to implement a simple menu of Bootstrap, it works fine except the active component does not work.  That means that when I loaded the page in a browser, I can click on the different links in my menu and the browser will take me there,