Re: Tecra A7 - Win XP driver for PC card Type II card necessary

Similar Questions

• Satellite Pro A100 - need win 7 driver for SD card reader

  I can't find driver for the next HD
  * SD card reader *:
  PCI\VEN_104C & DEV_803B & SUBSYS_FF101179 & REV_00

  other info
  System DMI information
  Manufacturer * TOSHIBA *.
  product * Satellite Pro A100. *
  version * PSAASE-00H004GR *.
  Sagna: * Win7 32 bit *.

  I have my serial number in
  http://de.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/
  but for Win7, I found only
  Update the BIOS
  Wireless Lan driver
  and no SD driver

  I also German?

  Your old laptop model no is of course not supported for Win7 but you can try to use the Vista driver and most of them also works on Win7.
  Test if you please and let us know if this will help.

  By the way: as you can see this forum is English language only, so try please post in English. Who cares if you will make mistakes? ;) My English is not so perfect.

• Tecra M5: Need BACK driver for LAN card

  Hi, since we use floppy disks to start BACK for access to the network, we need driver Intel PRO1000 PL BACK so that they work on our new M5s I could find on Toshiba or Intel sites...
  Thank you!

  As far as I know Toshiba doesn't provide drivers for DOS.
  I guess you have to google a little and maybe you can download from any website 3rd.

  PS: as far as I know the LAN card uses Intel 82573 L (Vidalia) chip.
  The info might be a useful tool for you.

• No sound after reinstalling the CD driver for sound card

  It all started when we do receive some music before of Powerpoint. We tried to update the driver for the card of its Soundblaster Audigy by shape to reinstall the CD we have obtained with the computer. It is reinstalled, but now we have NO noise at all. I tried to restore to an earlier time, but this has not fixed the problem. Check all the cables. To remove and reinstall sound card. Deleted SP3 and reinstalled because someone said that it would fix the corrupted files.   When we run difficulty It Now of microsoft, he says that everything is working properly.  Device Manager, I removed everything that I could see that had to do with the sound and reinstalled. Help, please. It's so frustrating not to make any noise.

  It does not say that the audio now works in Device Manager? If you double-click the audio inputs none of them see one! or X? If you want, I could check here with teamviewer. You will see what Im doing. If you decide to get this facility then run it. Give me the ID and the password, it gives you.

  Is its edge card, if it's not (and there is a soundboard on board, it is disabled)?

• Microsoft Bluetooth Notebook Mouse 5000 installation error: "problem installing the driver for the device software - file to install the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or la

  Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem

  I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »

  I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse

  Hello
   
   
  The drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.
   
  Step 1.
  You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
  I would also recommend to check if there are Windows updates for this device.
   
  Step 2.
  Here is the link to download the latest drivers.
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK
   
  Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
   
  This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.
   
  For more information see the links below.
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black

  When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black and stays black even after a reboot. I turn it off to go back to my office. nothing will be displayed, but the screen is powered.

  When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black and stays black even after a reboot. I turn it off to go back to my office. nothing will be displayed, but the screen is powered.

  Hello

  When you say "live update" are you talking about Windows Update?

  If so, you can go to the ATI site and download the latest driver for this video card. Here are the download links for the drivers later, Windows 7, 9.9 32-bit and 64-bit version for the Mobility Radeon 3000 series.

  ATI Catalyst Mobility Radeon Display Driver 32-Bit

  ATI Catalyst Mobility Radeon Display Driver 64 bit

  Hope this helps

  Thank you for using Windows 7 Ronnie Vernon MVP

• Tecra M9 - need to Win 7 driver for PCI communication controller

  Hello world

  I've been clean installation Win 7 32 bit on a Toshiba Tecra M9 and thereafter, all drivers.

  Now in the Device Manager it is still an unidentified device called "Communications controller PCI (single)", with several starting hardware ID by "PCI VEN_8086 & DEV_2A04 &.

  I can't identify what device it is, I searched for hours and a lot of people seem to have this problem. Everything works, except that a Campbell Scientific device (USB adapter to an owner interface) does not work and I fear that this could be the cause.

  Can someone help me?

  Best regards
  trash

  If you want to identify the unknown device please check http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  In your case, it's Intel PCI communication controller-Intel Management Engine Interface.
  Have you installed a driver for card slot?
  Try please install the driver of chip card reader and post comments.

  You will find that all the drivers on Toshiba download page?

• Tecra A11-19th - touchpad driver for Win 10

  Anyone know it if there is a driver for this model of Toshiba touchpad and when can we find? If there is not, is there a chance that it will be provided?

  A11 is not supported in Win10.
  Windows Update can find a compatible driver.

• Tecra 9100 - required accupoint driver for XP

  Hello

  I need a MS XP driver for the accupoint of my new (used) Tecra 9100. Or at least I think, because the accupoint does not work and there is no configuration on the menus of the mouse tab.

  On the driver download page http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU I don't know which is the "driver type", I have to choose.
  Can someone help me?

  Thank you

  JS

  There is no available accupoint driver for Tecra 9100 and Windows XP.

  I searched on the Web from Toshiba site too and I looked in the installation instructions, but there is no driver available.

  Sorry, but it's done.

• Re: Satellite L300-254 - need Win XP driver for WLan and FN keys

  I have laptop satellite L300-254 pslbge and have problems with drivers. This computer was emty (no recovery disk or drivers) then I bought it.

  I installed Win XP SP 2 disabling AHCI. Instaled the common Modules, Chip Set Utility, and when I try to install the drivers of controls (for the Fn keys). It is said that I did not install common Modules.

  Tried to install the WiFi drivers (realtek, but I do not know if the wlan hardware is realtek), but it is not recognized in Device Manager, (? ethernet controller), Lan works well.

  So please help me with wlan and the Fn keys problems

  Hey Buddy!

  I m using a Satellite L300 too with XP and I t notice any problem. It works correctly and the Web from Toshiba site displays all the drivers and tools for this.

  However, firstly everything that you should make sure that you have installed all the drivers for your laptop. The site Web of Toshiba shows only Realtek driver for WIFI then I guess you have Realtek WLAN card. You can run setup.exe to install drivers or if you get an error message?
  If you are not sure, you can also check what WLAN card you have on this site:
  http://www.PCIDatabase.com/
  The vendor and device ID, you can see in-online WLAN card properties Device Manager.

  Toshiba tools for FN keys, I can only say that you must install applications first Toshiba and then all the other common Modules. Common modules are required for all Toshiba applications works. Then remove the tools installed Toshiba and use this installation order that I used successfully on my Satellite L300:
  Toshiba Common modules
  TOSHIBA Hotkey utility
  Toshiba Touchpad POWER utility
  Toshiba Utilities
  Toshiba controls
  TOSHIBA Power Saver (not necessary, but very nice tool).

  I hope I could help a bit.

  Good bye

• Need win 7 driver for PERC 9 Mini h330

  I need to install Win 7 64 on a workstation Precision Rack 7910. The SP1 installation disc is not a driver for the RAID controller.  Download of 7910 page support is an exe file that is not recognized and won't let me extract the driver to copy. I couldn't find one that I can put on a USB key and the Windows installation routine will recognize it as a valid driver.

  I tried to search for the site of Dell and Googling for him, also tried to find it on another victory 7910 10 running.

  Can you help me to find or suggest a work around?

  No "circumvention" is necessary.

  You can extract the drivers from the Package update for Microsoft Windows format with the switch e, but one you need is the driver hard drive format:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=KMGRV&FILEID=3398353767&osCode=W764&ProductCode=precision-r7910-workstation&LanguageCode=en&CategoryID=SG

  You must download and run the file to extract the content before using it.

• Win 7 driver for Laserjet 2100

  I couldn't know if HP released drivers for the LaserJet 2100 to use in a 64-bit Windows environment. I tried the driver section, but I am unable to check if the driver exists [maybe it's me, my computer or HP that prevents the opening of the section of driver web page, but I've tried and failed several times]. I plan to purchase Windows 7, but will delay for a while if I can't continue to use excellent buddy 2100. I would appreciate any help on this matter. Thank you.

  He there is a universal driver for PCL 5, PCL 6, and PS available for download on HP.com.  Laserjet 2100 drivers are available through Windows Update in Windows 7.

  

• Need Win 7 driver for my HP Deskjet 1000 c printer.

  I need a driver for Windows 7, 64-bit, please, for my HP Deskjet 1000 c printer.  Printer is old but works well with XP and large format.

  Thanks to all those who can help you.
   
  Original title: hp deskjet 1000 c

  Hi John,.

  You can download the driver for HP Deskjet 1000 c printer on the manufacturer's Web site.

  Check out the link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4066377#N216

  If the problem persists, I suggest you contact HP support for help.

  http://h10025.www1.HP.com/ewfrf/WC/contacthp?CC=US&DLC=en&LC=en&os=4063&Product=4066377&sw_lang=

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Win 7 driver for Deskjet 950C

  Here's the deal. I know I can use Windows 7 update to get the driver for a printer to 950c. However, I am a system administrator in a corporate environment that is allowed to do. I have a user who has this printer and has no rights to use Windows Update to get this driver. Is there anywhere I can download it manually? I could download from Windows Update on my machine... but no idea on which it is stored.

  Thank you

  Jay

  Too bad... I found a way round-to-end to get it on his machine.

  Well, I created the printer on my machine and shared.

  Then he installed the printer on his machine from me to get the driver loaded on his machine.

  He then hooked the printer locally on his computer and he was able to install.

• Retired HP Pavilion a6000n PC and can not find the driver for Network Card card do? Download Driver?

  Gradient of the Visa OS came with the PC for XP.  Installed new HD and partitioned drive so there is no pass file.

  I found that it is management of network integrated 10/100 Base-T interface but cannot find the manufacturer to use it Web site.  In addition, been

  playback ChipSet might need drivers or upgrade?  Don't know that much about this, but enough to get in trouble if

  I'm not "coached" through it all.  Low grade was the Visa MS HP accompanying MS XP Professional.                               Need a link or help find the Driver for the network card.

  Thank you.

  Thank you very much... which seems to do the job for letting me use the network card.  Once I installed the chipset you me too, my IE was able to get the net.  The only thing that happened that I wonder about, what I choose to accept or not something RAID, which I accepted and it seems to work with one small annoying side affect: I can't get Windows Update to run.  I get this error: 0x8024400a and I spent literally hours looking for and trying different solutions, which none have worked. Do you think that there is something that would change this Nvidia software which would cause that?   I get out to the internet OK and can go to any web page.  It runs a bit slow, but I thought it might be because I'm using a newly installed Win XP and it has only 2 SP.  My next step in getting this thing to work was to run Windows Update and anti-virus stuff set.   Any way, thanks again for your help.