Re: Tecra A9 - error 39 DVD/CD ROM/burner

Similar Questions

• Satellite M30: Lack of reader DVD-CD ROM D:

  MY COMPUTER SATELLITE M30 IS MISSING, perhaps DAMAGED, the EQUIPMENT RELATIVE to the UNIT DISC DVD-CD. I TRIED TO CANCELED AND REINSTALLED, BUT THE MESSAGE FOLLOWING ERROR APPEARS: "DVD-CD ROM UNIT NOT CONNECTED." SO FOR NOW I HAVE C: DRIVE UNIQUE FIXED WHERE TO FIND HARDWARE AND DRIVER?
  I USE A MAT * A UJDA 750.

  Hello

  If the drive is not listed in Windows Explorer can you please let us know what status a CD/DVD drive in Device Manager (is there an error message like code-xxx)?

• Error: The DVD player won't read or burn discs. TS-L633R CD-DVD player. Laptop HP DV6-3120US. Win 7.

  The product name and number:

  HP Pavilion dv6-3120us

  OPERATING SYSTEM

  Windows 7 Home Premium. 64 bit.

  Error message

  "Insert a disk; Insert a disk in drive E:. "

  Background

  Windows 7 system pre-installed on recognized computer CD/DVD ROM drive for about 3 months. Malware corrupted operating system. I reinstalled the OS disk from the recovery partition. CD/DVD ROM drive could not read or write, and I can not restore the old files or save the current configuration via the CD/DVD-ROM drive. All Windows 7 drivers, and hardware updates seem to be installed and up to date as of 04/10/2011.

  Troubleshooting steps

  1 attempted to play audio CDs. Same error message.

  2 tried to read data CD-ROM. same error message.

  3 tried to read DVD - ROM data. same error message.

  4 Write DVD ROM has failed. Same error message.

  5 re-loaded OS 2nd time. No change. Same error message.

  6. checked with HP Support Assistant. DVD drive is recognized but not the media. No change.

  7 checked Device Manager. DVD player is recognised as TS-L633R.

  8. driver is cdrom.sys version 6.1.7600.16385. Clicked on Update Driver, no change.

  9. I tried the uninstalling and reinstalling the driver. No change.

  10 enabled BIOS. Processor AMD Turion II P540 Dual Core 2.4 Ghz. BIOS seems to be up-to-date, version F.27.

  11 BIOS lists bootable CD/DVD-ROM drive. Reordered the first road and used Knoppix Linux boot boot disk, no change. Windows starts instead.

  12 review of registry for "filter" and "lower filter" entries.  Checked registry 4D36E965-E325-11CE-BFC1-08002BE10318. No upper or lower filters entries in current filter. No change.

  13 Ran 'hardware and troubleshooting of devices. " It cannot detect the cd/dvd. No change.

  The drive has power, WEAVES, is recognized by the BIOS and Windows 7. However, it does not read or write CD ROM or DVD ROM discs

  I'm out of options.  What to do to make the drive to cd/dvd rom read and write CDs?

  

  Thanks for your help.  Matt

  Received a new DVD/CD ROM today S of Ben and Alan at HP today.  The drive was manufactured in July 2011 and seems to have the same model number information. The old one was from December 2010.

  Installation took about 10 minutes to the included instructions, and the player now plays all CD and DVD media.  Thanks to the HP support for replacement of equipment warrantly quick fix.

• DVD / CD ROM Drive - cannot load the drivers

  My DVD / CD ROM has stoppped working.  Replaced by a new, but get this error in Device Manager

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  New CD-ROM/CD-RW, or DVD-ROM, etc., usually never come from the factory with

  the parameters of the right stem. Take the device, look at the back, place the jumper pin plastic.

  set to slave or master, if possible, install it on another cable IDE, set another pin device

  According to the needs. XP will reinstall at startup.

  In addition, most of these devices is "firmware" updates, go to his web site from mfg & install it

  If it is available...

• DVD-CD ROM DRIVE SUDDENLY STOPPED WORKING

  My DVD - CD rom suddenly stopped working.  It does not appear on my computer.  In Device Manager, it shows the exclamation point in a yellow triangle and has the following: Windows cannot load the driver for this hardware device.  The driver may be corrupted or missing. (Code 39).  I tried updating the driver, and he said that the best updated driver is already installed.  But it won't work.  When I put a disc in, the green light as it tries to work, but nothing.  In the properties in Device Manager, he suggested looking for a microsoft solution and I did it and there is no solutions.  Help, please!  I have install all the recommended and important updates, I have this game automatically.  I have Vista service pack 2.  Apart from this, the computer works fine.  I appreciate any help you can offer.  Thank you.

  Hello

  Code 39 means that the driver is corrupted or missing.

  Do this - control panel - Device Manager 1 - click double-click on the drive - CD/DVD
  Driver update (this can do nothing as MS is far behind the drivers of certification). Now LAW
  Click on - UNINSTALL - REBOOT - this will rebuild the driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  A MR FIXIT
  http://support.Microsoft.com/kb/314060

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  or

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Other possibilities include loose contacts or cables and maybe a bad disc.

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Satellite Pro 2100 DVD - CD ROM issues

  What is the name for the reader of standard DVD-CD ROM attached to this one. Mine is not removable, but it has suddenly stopped working properly.
  I would like to get a new one, but can you all please advice how to remove the old. Also how or where I can buy a replacement that works with this laptop specification (Please provide the name of the product or code). Thanks to you all.

  Chan

  Hi chan

  You should contact the Service partner. They can give you this kind of information, or order a new one. Replacement can also be dangerous because you can damage some hardware components or cables another. Please be careful about this. A small mistake by yourself can you cost a lot of money.

• Satellite Toshiba SA60-742, DVD - RW rom cannot burn DVDs

  The DVD - RW rom don't recognize any blank DVD (it asks to insert media, but the DVD is already inside).
  I can read CDs and DVDs (with movies), but I can write just CD. Where is the problem.

  Post edited by: clara_anghel

  Hello

  What type of DVD you want to burn? DVD-R or DVD + R?

  DVD + R are not supported by your player. I found the following list what speed and media your Player supports:

  Maximum speed
  Read
  CD-ROM, CD - R 24xMax
  CD - RW 12xMax
  DVD-ROM 8xMax
  DVD - R, DVD - RW 4xMax
  DVD - RAM N/A

  To write
  CD - R 16xMax
  CD - RW 4xMax
  HS CD - RW 10xMax
  DVD - R 2 x
  DVD - RW 1 x

  Rudi Bye

• DVD / cd - rom not find disc dvd

  Hello. When I put disc in the drive, nothing has been found. December midle evrething was ok, I can read the dvd.

  I try troubleshooting - configuration of a device. They can fix isuues, they show 3 problems: hp DVDRAM GU70N has a driver problems - not not fixed, USB - if xHCI host USB controller has a driver problem - not not fixed, material changes could not be identified - detected.

  I'm trying

  System - Device Manager - DVD/CD-ROM drives - hp DVDRAM GU70N status - properties drive - peripheral:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Driver is up to date and show only the CD - ROM Drive

  Hello

  Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• DVD/CD rom drive reads CDs but does not read the DVD.

  My Dell Inspiron 1300 laptop has a DVD/CD rom drive.  It loads all the CD I want and them automatically opens on the D drive.  When I put in a DVD movie it will not play.  I open my computer, and then look at the D drive, and it does not even recognize that there is a DVD inside but it shows a screen of a CD that I put in there.  This tells me that it works and it has a green light on the side which shows.  Also, when I insert the DVD it makes sounds as it tries to recognize, but then it stops and does not appear.  Can anyone help?  I really appreciate it.  I'm not very savvy computer.  I know that some in this topic because I am a teacher and try to catch up with things, but I'm certainly no computer technology.  Thank you very much!  Let me know if I need to give more info.  I think the reader is Sony CRX835EK but I'm not 100% sure on this one here.

  If your Player reads cd but not dvd which indicates that the material works very well. You need to change the registry inorder to solve this problem.

  1) click on the start menu
  2) click on 'run '.
  (3) type "regedit" and click ok
  4) go to the key of the string "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}.
  (5) delete "upper filters" and "lower in the right window.
  (6) right click on my computer in the start menu.
  7) click on properties
  8) go to the Hardware tab
  9) click on Device Manager
  (10) expand the dvd/cdrom drives
  (11) made a right click the dvd rom and click on uninstall
  (12) restart the computer

  After the reboot, windows should automatically install a ROM clean disc and read DVDs very well if you have the correctDVDdecoders

  

  .

• DVD/cd rom drives

  trouble with dvd/cd rom drives, it gives me a code 39 (damaged or missing driver)

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DVD/CD rom drive

  I recently took my computer in to get fixed because it crashed.  When I came back, I found out later when I tried to use my DVD/CD rom drive that he had disappeared.  I have done research on the internet about it and found a lot of sites that talk about drivers update and deleting files in the registry to get back, but my problem is it disappeared completely.  Also, I got F, J, & K drives and they are gone also.  I mean gone... no linked files or anything like that.  So this made my DVD/CD rom useless player.  I call the guy who worked on my computer, but it is difficult to get your hands on.  My computer is a Dell 2009 Windows Vista desktop computer.  I can't even try to reinstall Vista as the hard drive does not work.  Can someone give me any ideas as what to do?  Is there anywhere I can download files to make it work again?  Any info would be greatly appreciated.

  Hello

  Other to try the information contained in the links, which you have used a part of, take it back to the technology that worked on your machine.

  And we do not know if the connection cable it is physically disconnected if work done on your machine

  There is a "Fix - it" Microsoft for your problem on this link

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If above doesn't fix it, continue with the help of Microsoft:

  http://support.Microsoft.com/kb/982116/en-us

  See you soon.

• DVD Maker - might not seem to save my project. Error loading DVD maker project file

  I gave all the details...

  OT: DVD Maker - can't seem to save my project. Windows tells me -"error loading DVD maker project file. The file menu is not available. The setting has been Cleard.  Can anyone help!

  Hello

  1. What is the file extension of the project files you are trying to load?

  2. when the file is saved?

  3 does happen with all files or only some specific files?

  Please check if you are able to open these files on another computer or not.

  Also create a new test file and see if that opens.

  For your reference:

  Work with projects in Windows DVD

  http://Windows.Microsoft.com/en-us/Windows7/work-with-projects-in-Windows-DVD-Maker

  
  DVD-video burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

• support of DVD/CD-ROM-CD-ROM-drives

  Hello

  can someone help me with this please? When I go in to my manager.under camera my dvd/CD-ROM-CD-ROM-drives that I have a yellow exclamation mark on hl-dt-st-dvd-ram-gh10l I right click on it, click on properties in the status.it device tells me windows cannot load the driver for this hardware device, the driver may be corrupted or missing code39.can someone please tell me how fixs this? I have hp-pavilion a6400f desktop pc with windows 7 32 bit thank you for any help in this

  Run the Microsoft Fixit and this should solve the problem

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• CD DVD player: can not read data DVD discs that burned same machine

  Laptop with Windows Vista cannot read data DVD discs that burned same machine.  The discs work on another computer.  My laptop will read CD disks, he did, and it will play DVD movies. What's wrong?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 parts to no function
  while others are doing so correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner
  could help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always
  issue.

  CD/DVDs have a tolerance + - and your can read/write on the outside edge
  tolerances of the disks. They may be delivered, but it is usually cheaper to replace
  the reader.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting might not help if there are problems of alignment and wear it
  is worth it.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">