Re: Tecra M5 - mouse pointer move only

Similar Questions

• My mouse pointer moves in the opposite direction, I intend when I use the touchpad on my laptop. It works fine when I use my docking station and external mouse. How can I fix it?

  I'm using Windows Vista with a Sony Vaio laptop.  At the office, I have a docking station with keyboard and external mouse.  Everything works fine with this Setup.  But when I unplug the docking station and use the touchpad on the laptop, my mouse pointer moves in the opposite direction, that is my intention.  I move my finger and the pointer down.  I move to the right and the pointer goes left.  How can I fix?

  Go to start /Control Panel, and then double-click the icon '' mouse. '' When this window opens, select the tab "Touch Pad" at the top. There's a box near the bottom called "Touch sensitivity", click on that. Change the settings a little bit lower than what they are currently at.

• Mouse pointer disappears only in Windows Media Center.

  Since I installed windows 7 my mouse pointer will not be displayed in the center of media windows it is there but invisible. all other programs are very well

  Hello
   
   
   
  Try the below listed methods one by one and check if everything works correctly in Windows Media Center.
  
  Method 1.
  Let us disable the traces of the mouse and check if we retrieve the pointer. See the article below for the procedure of
  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings
  
  Method 2.
  If the magnifying glass is about to launch in the start-up, it may cause conflict in this scenario.  Let us minimize Media Center and follow the steps below and check if we get the pointer.
  a. Click Start, click Control Panel and click on optimize visual display in the category of easy access.
  b. clear the check box next to the magnifying glass Tower, then click on apply.
  c. restart your computer and sign in to your account.
  d. you can see in the spotlight one last time.
  e. in case it happens simply close the Magnifier and again to restart your computer.
  f. Once you log after doing this the magnifying glass will be gone.
  
  Method 3.
  If the problem continues to view us in safe mode. It could be a problem with drivers or another application could be at the origin of the conflict.
  Please check if you are facing the same question when working in safe mode.
  1. reboot your computer.
  2. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  3. using the arrow keys, select the desired option of Mode safe.
  4. press the Enter key on your keyboard to start in safe mode of Windows 7.
  5. when Windows starts, use Windows Media Center and check. (In safe mode Windows Media centyer wil not play videos)
   
  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Wireless Bluetooth not recognised in Vista - mouse pointer move not.

  Have Microsoft and Logitech wireless mice. New batteries in both. Everyone has light display in bluetooth adapter and mouse. Neither will move pointer... What can be the problem?

  Thank you!

  Have you installed the drivers, firmware, or software required for the function of the mouse?  Even if you did since the discs that came with the mouse, it could have many updates since then.  Go to the manufacturer web sites to get downloads there is place and install them and then restart and see if the mouse works now.  Make sure you get accurate versions applicable to your mouse AND your version of Vista. Also, try to plug one at a time - they may be conflicting with each other.  If no, go to start / Control Panel / mouse and check the settings to make sure that bluetooth is turned on (and the same goes for bluetooth itself).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The mouse pointer move on computer laptop windows 7

  The pointer just collapsed in the middle of writing an e-mail so I pluged in a USB mouse and I have not had any problems. As soon as I unplugged the USB mouse from the laptop

  the mouse was and still does not?

  I tried all the fixes I found on a few forums, but nothing helps...

  Windows 7 64 bit

  .

  Restart your computer: is not blocked. Hold the power button, or lift the battery out.

• Mouse pointer moves while typing

  When typing, the cursor moves to a different location. This is serious concern during typing. How to fix this, in Windows 7?

  On Thu, 20 Sep 2012 16:08 + 0000, Bapujee wrote:

  When typing, the cursor moves to a different location. This is serious concern during typing. How to fix this, in Windows 7?

  Using a laptop?

  If so, you are most probably accidentally brushing your hand against the
  touchpad that you type.

  Ken Blake, Microsoft MVP

• Tecra S1: Move the mouse pointer

  From time to time my mouse pointer moves slowly upward or sideways. This happens once anchored and when not docked. In the latter case, I have an external mouse not attached.

  This problem is really annoying, especially when you try to hit a box for example.

  Any ideas?

  See you soon

  seasack

  Hi seasack

  If you use the pointer internal (the stick between GH and B), it is very common that the ca of pointer starts to move.
  The reason is a bit technical but very understandable.
  The mouse pointer works like a small joystick. Means that it is that you push forward, down, sideways and so on. However, please check the HOUSE or 0-position from time to time. When you're not, this would be a normal position of the HOUSE for us but it doesn't.
  It is therefore possible that it may be wrong to believe that the position of the HOUSE is when you push forward.
  If you stand and do not change the position of the needle for (I think) 2 separate controls the position of the HOUSE, this position will then be the new post HOME until the next time he finds another.
  Actual cases is not that extreme, of course, but more normal cases are that you bend your finger on the pointer when for example reading something on the screen. The pointer can recognize as a small boost, and if you do go, then he could have a new position of the HOUSE and start to drift or it could be "heavy" feeling in a certain direction.
  The solution? Simple! Leave it on for about 5 seconds and it will go away.

  If you have this problem, even if your not even using the pointer, then I guess you have a hardware problem.
  Try disabling the internal mouse by pressing FN + F9.

  Good luck

  Tom

• Black screen with mouse pointer count on reboot after installing SP3

  I tried to install Service Pack 3 on a PC running XP Home Edition (new installation).

  Although Microsoft Update has finished installing SP3 and the computer reboots, I get the XP installation screen base with the message "Please wait...". ", which disappears after a few seconds, leaving me with a black screen with only the mouse pointer.

  The mouse pointer moves then the PC broke down, well that no matter how long I leave nothing happens.

  I tried to uninstall SP3 and do it again (when I Uninstall SP3, Windows starts very well) and also uninstall SP3 as well as my Antivirus and try the installation again. But whenever I'm just left whit black screen.

  Try to update with the custom option.  I had problems like this before.  Usually you are missing a driver or something of this kind that makes you hang.  To update while the custom option, with the exception of SP3.  Reboot several times the installation of updates with the "Custom" option  Once all updates have been installed except SP3, you can try SP3 and see what happens.  This usually takes care of it when I have the same problem. Serving the community one computer at a time www.therushvillecomputerguy.com please post a reply to let us know whether or not our response helped.

• Question/the mouse pointer while playing music

  When I play music or through Media Player or Stream on Acer Aspire 17.3 "4 GB 8.1 Windows laptop and move the pointer of the mouse while the music plays music drags or glitches while the mouse pointer moves, but will stop if I stop moving.   Any ideas on how to solve this problem?

  try to install this:

  http://global-download.Acer.com/GDFiles/driver/AMT/AMT_Intel_10.0.30.1054_W81x64_A.zip?acerid=635567...

  or try this:

  CTRL-Alt-Del to load the Task Manager
  Search in the background process to find "Intel (r) technology access Service."
  Right click and choose "end task".

• Change in focus of the window with the mouse pointer

  On one of my computers when the mouse pointer moves to another window the focus switches to this window.  But this does not happen on my other machine.  Where can I find the setting for this?

  Start > Control Panel > easy access > easy access Center > make the mouse easier to use > check Activate a window by hovering over it with the mouse

• The mouse pointer & open windows disappear off the screen to the right

  The mouse pointer moves beyond the screen to the right and is not visible, as if the office is extended beyond the edge of the screen. Open programs or programs visible on the taskbar sometimes will, when clicked on disappear too out there and then I can't get them on the screen where I can see. If I'm lucky I can get the pointer in the right spot and can drag the back window where I can see it.

  I have a 22 "h - d lcd wide screen monitor. Are there settings that I need to adjust or what?

  Thank you

  You have a second monitor or a television plugged into the video card? You will need to go into your control panel of the video driver and adjust it for a single screen.
   
  You can also try the automatic adjustment of your monitors.
   
  
  --

  Dustin Harper
  E-mail address is removed from the privacy *.
  http://www.mstechpages.com  Microsoft News, support, FAQ, and much more!

  "greendean" wrote in message News: ef666882-7a8d-4900-8090-9772b7d7ab3e...

  The mouse pointer moves beyond the screen to the right and is not visible, as if the office is extended beyond the edge of the screen. Open programs or programs visible on the taskbar sometimes will, when clicked on disappear too out there and then I can't get them on the screen where I can see. If I'm lucky I can get the pointer in the right spot and can drag the back window where I can see it.

  I have a 22 "h - d lcd wide screen monitor. Are there settings that I need to adjust or what?

  Thank you

  Dustin Harper * address email is removed from the privacy * http://www.mstechpages.com---aide Windows and Support Page

• Tecra S2: the mouse pointer jump down to the left

  Toshiba Tecra S2, PTS20E-18S032GR, 01/30/2006 purchase model number
  Description link: http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/selected_product_option.jsp?service=DE&PRODUCT_ID= 106134 & DISC_MODEL = 0

  My problem is, that the independent the mouse cursor move down the screen to the left. I do anything with the TouchPad or AccuPoint (DualPoint). When I turn off the TouchPad (FN + F9)
  http://www.schreiterweb.de/t/tecra_11.jpg
  and another an extren mouse so I don't have this problem.

  I can use and choose from the menu of the mouse between
  1 TouchPad and AccuPoint or
  2. only the TouchPad or
  3. only AccuPoint.
  http://www.schreiterweb.de/t/tecra_12.jpg

  When I cut only the AccuPoint and not the TouchPad I don't have this problem.
  http://www.schreiterweb.de/t/tecra_13.jpg

  Do you think this is a problem of the AccuPoint software or hareware?

  See the page of the Toshiba driver for the new update of AccuPoint utility and/or touchpad driver/utility.
  Try to update these utilities

• The mouse pointer turns into a pointer to 'move' for no reason

  I have been using a new laptop for a few months now.  All of a sudden the mouse began to change at random from the standard windows arrow pointer, a pointer to 'move' - this is a pointer with 4 arrows pointing outward.

  The change seems to occur in any specific situation.  Sometimes the pointer turns back on its own, but usually I have to go into the control panel and accept the default settings of the mouse again to retrieve the pointer of the mouse to normal.  The change to the pointer 'move' is not in the Control Panel mouse - settings settings don't never change.

  I tried the following things:
  -change my settings of the mouse pointer to the user the dinosaur mouse pointer scheme, but the same problem occurs
  -Uninstall mouse drivers and let the PC to reinstall the driver automatically at startup

  I use a USB mouse.  When I use the laptop without the USB mouse, the problem actually gets worse.  In this case, the mouse pointer changes, and the mouse pointer freezes.  My main concern is the modification of the pointer, not the gel.

  Anyone seen this before?  In addition, no one knows how to fix this problem?

  Thank you.

  I ended up having my motherboard replaced on my laptop keyboard and Mouse touchpad.  Then only the problem was solved.

• White screen at the Vista start up... only the mouse pointer, loading the driver freezes on crcdisk.sys loading, sfc/scannow does not work...

  Hello
  I don't know if this is the right place for this post... Sorry if it's not! I had looked online if anyone has the same problem to me, I found similar problems, but not the mine one (but if there is, can you please give me the link?).
  I have a DELL LATITUDE D830's with a dual boot (Ubuntu and Vista). When I run Vista I get the Windows logo and then a black screen with only the mouse pointer.
  Keyboard does not work. I can move the mouse, but can not select anything. No work of Ctr + Alt + Delete.
  I can just turn off the computer. At first I need to press F8 to choose something otherwise I get the black screen.
  If I reboot requesting the automatic restoration of the PC that he asks me the account and work only account is mine a (no administrator available). He then suggested to contact the administrator. I checked the error report and nothing is reported: the system works.
  I have no previous configuration to restore.
  I can access the command prompt. So I tried to write sfc/scannow. The answer is that to complete the process requires to restart the computer and make again sfc/scannow. I restart again, the new order, but I get the same answer...
  When I get the black screen, CPU is not disabled, because after a long time (about 2 hours) the computer restarts itself... If something happens even if I don't know what!

  The only thing I have not tried is to restore Vista from CD... I'm really afraid that this could remove the partition, or crash at startup I have, by removing access to Linux!

  I have a backup of all my files, so no matter if what I have to do to cancel my files, but what I really need is to keep Linux operating.

  So, if you have any suggestions... I'm not good at using the computer, so, please, a solution step by step be really appreciate it!
  Thank you very much

  Paola

  PS No peripherics are connected, the wireless is disabled

  Hi seymar,.

  I suggest that you run a tool to restart system on the computer and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions. 4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then I suggest that you run CHKDSK on the computer to check if there are any errors on the hard drive.
  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click on the command prompt and type chkdsk command-line /f and wait until the scan is complete and later to restart the computer and check what is happening.

  For more information please visit the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 64 bit - the mouse pointer doesn't move do not but the mouse is recognized and left/right click

  Problem:

  My mouse pointer is in the middle of the screen and will not go. If I have a left or right click, click on the system recognizes this, but does not respond to the mouse movement. My wacom tablet 's going to move the cursor.

  I've been running the system for 6 months. This problem occurred only 4 days ago. All other features are OK and unchanged.

  Solution attempts:

  I bought another USB mouse and it has the same problem.

  I also tried to reinstall the USB drivers as shown in the post of http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/20826bf8-996e-4622-96f5-09ab7a7d0b1f

  Hardware / software:

  • Generic PC with motherboard Gigabyte
  • Intel Core i7 with 12 GB
  • Windows 7 Professional 64 bit (active)
  • Razer mouse connected via a USB cable
  • Generic USB mouse is brand Legend

  Please let me know if you need more information

  Hi Ardeet,

  Two other things I would say.  First of all, have you been able to test your mouse on another machine to make sure it's working properly?

  Also, have you been to the website of the manufacturer of your computer to update the drivers for your machine and chipset?

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think