Re: Tecra M9 necessary driver (PTM91E) for "simple communication controller.
I have Win7x64 on my installed Tecra M9
There is a material that I can not know what driver is needed for
is the hardware ID: PCI\VEN_8086 & DEV_2A04 & SUBSYS_00011179 & REV_03
and in Device Manager / it appears as "controller of communications (single).
research on engines research say it could be an Intel Mobile PM965 GM965 MEI Controller
But despite this - I can't find a free driver available for free.
Any tips? Which driver miss me - I installed all available on the Toshiba support page (I think)
Hello
Please, try this one:
http://www.DriverCure.com/driver/driver_captcha.php?device_driver_id=5CFDA707-11B0-4FEC-8C89-65E3E4EA9AFD
Tags: Toshiba
Similar Questions
-
Tecra M9: What is the "PCI Simple Communications controller"?
Hello
I just rolled back a Tecra M9 - 12R (T7300) to XP Pro.
I found all the drivers on the site but now I installed all and yet, I get a non recognized "PCI Simple Communications Controller" in Device Manager.
I installed the card ethernet and wi - fi driver modem very well.Anyone know what it is?
Thank youI don't know about you but I need modem description. Have you installed driver modem Windows XP Home edition?
-
T420 PCI Simple Communications Controller
Due to software problems (won't it 64 compatibal until end of July) I had to convert to Win7 32 bit. Now I have a device without driver. PCI Simple Communications controller. Its location is bus PCI 0, 22, function 0 device.
-
Satellite P500 - 1 CG - PCI Simple Communications controller driver for Win 7
I reinstalled the system in my Satellite P500 - 1 cg, because it was in English and I use the Polish language.
After the reinstallation, I have a problem and I need a "PCI Simple Communications controller / pilot.»Can someone help me on this?
Thanks in advance for any help...Hello
To be honest PCI Simple Communications Controller does not for me
I think that there is a translation error.Please check this doc from Toshiba:
How to identify an unknown device
http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htmIt helps you to identify the device and find the right driver.
Welcome them
-
Hello
I installed Win 7 64 bit on my new computer HP 280 G1, but it doesn't find Pci simple communication controller drivers.
It's the hardware ID:
PCI\VEN_8086 & DEV_8C3A & SUBSYS_2B34103C & REV_04
PCI\VEN_8086 & DEV_8C3A & SUBSYS_2B34103C
PCI\VEN_8086 & DEV_8C3A & CC_078000
PCI\VEN_8086 & DEV_8C3A & CC_0780could you help me find this driver.
Thank you
Hello:
You need this driver...
This package contains the Intel Management Engine Interface driver for support of office models that are running a supported operating system.
-
Driver missing for PCI Simple Communications Controller for U41
I have a problem with a driver for PCI Simple Communications Controller for U41. Please help for the best solution thanks
Good day and welcome to the community.
This is usually resolved by installing the Intel Management Engine Interface package.
Please take a look at the pages of resources of your machine, under the section of Chipset :
http://support.Lenovo.com/us/en/products/laptops-and-netbooks/u-series/U41-70
I don't know if there are also the Serial i/o package.
I hope this helps a little.
Kind regards.
-
TravelMate x 483 PCI Simple Communications Controller driver for windows 8 pro
Can someone give me a link to solve my problem of device PCI Simple Communications Controller driver? I use Windows 8 pro. Thank you
This isn't a driver that should be necessary on this system.
If you are upgrading Windows 7, it should have pulled the driver from 7 or installed in native mode.
If you have a system with Windows 8 natively, it should already be there.
If you have the Recovery Manager, you install all the drivers and applications from there.
Otherwise, I will propose to restore the system to factory settings.
Please see this link:
http://community.Acer.com/T5/community-KB/reloading-your-Acer-computer/Ta-p/45793 -
Need PCI Simple Communications Controller driver for Win7 for Portege A600-122
Hello
I put Windows 7 x 64 on my Portege A600-122 and have a "PCI of Simple Communications controller" in Device Manager. It seems that it is because the Intel AMT (Active Management Technology) driver is not installed.
I am struggling to find it, there is a [driver Windows 7 x 86 | http://uk.computers.toshiba-europe.com/innovation/jsp/autoDetect.do?service=UK&ACTION=PROCESS_DETECTION& TYPE = FORWARD & SOURCE = SMP & COUNTRY = 242 & RQS = TRUE & MODEL = PORTEGE + A600 & SERIES = X8100601H & service = UK & LOCAL = & OSBUILD = 7600 & SUB_TYPE = SMP & OSBITSIZE = 64, & PANUMBER = PP A61E - 008008EN & ERROR = 0]
and a [driver Vista x 86: http://uk.computers.toshiba-europe.com/innovation/jsp/autoDetect.do?service=UK&ACTION=PROCESS_DETECTION& TYPE = FORWARD & SOURCE = SMP & COUNTRY = 242 & RQS = TRUE & MODEL = PORTEGE + A600 & SERIES = X8100601H & service = UK & LOCAL = & OSBUILD = 7600 & SUB_TYPE = SMP & OSBITSIZE = 64, & PANUMBER = PP A61E - 008008EN & ERROR = 0]
but I can not find a driver Windows 7 x 64, will make one of the above, or there at - it another link to the x 64 driver?
Thank you
Hello
Please, try to download and install:
http://www.DriverCure.com/driver/driver_captcha.php?device_driver_id=5CFDA707-11B0-4FEC-8C89-65E3E4EA9AFD
-
PCI Simple Communications Controller driver for HP-Compaq dc5800 SFF
In the device, other devices shows yellow exclamation with PCI Simple Communications Controller Manager.
I found a few references to care packs, but none that really meet this model and the OS which is Windows 7 Enterprise 32-bit Edition.
If you select the download button, it seems that here, the connection cannot connect to the FTP as happens with errors of popup like 425 can't open data connection.
So two things has driver and is there a http download?
Thank you
Paul_Tikkanen wrote:
Hello:
You need to install the HECI of 32-bit driver that is not listed in the W7 to your PC download page.
Thanks that solved the problem of missing driver.
Had to download off site due to firewall blocks FTP. But as an alternative would download flow anyway.
-
Driver for PCI simple communication controller
Dear Sir
Since the time I loaded win 7, (I have win 7 Professional, completely up to date, core 2 quad 2.40 GHz, 4 GB of RAM, 3 internal HDD seagate 1 TB at 7200 RPM, nvidia GE Force each 512 MB VRAM) I found that the driver PCI simple communication controller is missing and it shows an excalmation mark. My system works fine, I have no problems with my system, but I was wondering what is this to. I tried to find the driver on the net, but I was not able to find it. Anyone of you could help me on what it is, and how do I remove the exclamation point in Device Manager. Just concerned.
ConcerningI am an ICU consultant, doctor Dr. Alok Modi MD
You must have a compatible analog modem installed on your computer... not a problem if you don't fax or connect to a line of appeal... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/
-
HP ProBook 440 G2: PCI Simple Communications Controller Driver for HP ProBook 440 G2
Hi, I am using HP ProBook 440 G2 & Windows 7 Professional 64 bit OS. I need the under drivers.
PCI Simple Communications controller:
PCI\VEN_8086 & DEV_9CBA & SUBSYS_2247103C & REV_03
PCI\VEN_8086 & DEV_9CBA & SUBSYS_2247103C
PCI\VEN_8086 & DEV_9CBA & CC_078000
PCI\VEN_8086 & DEV_9CBA & CC_0780Unknown device:
ACPI\HPQ6007
* HPQ6007Unknown device:
ACPI\INT33A0
* INT33A0Hello
In the order displayed, you need to know.
Kind regards
DP - K
-
I can't find the driver for my PCI simple communication controller that is compatible with 8.1 64-bit windows. could someone point me in the right direction (if all goes well a link to the driver I need)? I have already spent a lot of time to research.
As I wrote above... If automatic installation method does not work, you must manually install the driver.
Here's how to manually install the driver...
Go to Device Manager and click the controller of simple communication IBOS who need the pilot.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp34743.
Make sure that the include subfolders is selected and the driver should install.
Then restart the PC.
-
missing PCI Simple Communications controller for HP Compaq 6000 Pro SFF PC
HY, I installed windows 7 on my Hp compaq 6000 pro.but simple Communications controller PCI is not found. I searched a lot and tried a lot of drivers.but this problem is not fixed
Here's my hardware ID
PCI\VEN_8086 & DEV_2E14 & SUBSYS_3048103C & REV_03
PCI\VEN_8086 & DEV_2E14 & SUBSYS_3048103C
PCI\VEN_8086 & DEV_2E14 & CC_078000
PCI\VEN_8086 & DEV_2E14 & CC_0780Hello:
You need this driver...
This package contains the device driver Intel Active Client Manager Host Embedded Controller Interface (HECI) for desktop models and operating systems supported.
-
Ethernet controller, PCI Simple communications controller and for desktop sm bus controller
Hello
I'm having a problem with the following drivers after installing windows 64-bit edition Home premium. I shared the ID of material for them.
Controller 1) Ethernet
PCI\VEN_8086 & DEV_1503 & SUBSYS_20178086 & REV_05
PCI\VEN_8086 & DEV_1503 & SUBSYS_20178086
PCI\VEN_8086 & DEV_1503 & CC_020000
PCI\VEN_8086 & DEV_1503 & CC_02002 PCI Simple communication controller)
PCI\VEN_8086 & DEV_1C3A & SUBSYS_20178086 & REV_04
PCI\VEN_8086 & DEV_1C3A & SUBSYS_20178086
PCI\VEN_8086 & DEV_1C3A & CC_078000
PCI\VEN_8086 & DEV_1C3A & CC_0780SM Bus controller 3)
PCI\VEN_8086 & DEV_1C22 & SUBSYS_20178086 & REV_05
PCI\VEN_8086 & DEV_1C22 & SUBSYS_20178086
PCI\VEN_8086 & DEV_1C22 & CC_0C0500
PCI\VEN_8086 & DEV_1C22 & CC_0C05Hello:
You did not mention which version of the operating system (XP, Vista, W7)?
One needs drivers Intel gigabit network.
The other requires the Intel Management Engine Interface driver (or the driver HECI).
The last one needs that you must first install the chipset driver.
If you provide the complete model of the PC in question and the operating system, I'll be happy to post the links for these drivers for you if you don't know where to find them.
-
PCI Simple Communications controller driver
I own a Compaq Presario Media Center PC, AMD Desktop SR2020NX
The PCI Simple communications controller driver has an error in the Device Manager. yellow triangle. "The drivers for this device are not installed. (code 28) »
I can't find the driver for it. I can no longer do a search through this PC because I can't even connect to internet.It's the hardware ID
PCI\VEN_1471 & DEV_0000 & SUBSYS_200C1471 & REV_00
PCI\VEN_1471 & DEV_0000 & SUBSYS_200C1471
PCI\VEN_1471 & DEV_0000 & CC_078000
PCI\VEN_1471 & DEV_0000 & CC_0780This device is the fax modem. It is a rather antiquated device. Do you really use it?
I would like to uninstall the device and ignore the error message.
This device is not the reason why you are unable to connect to the internet. I suggest you find a PCI or PCI Express x 1 card network card and install it in one of the available locations. I can't make suggestions on personal credit cards because you have not specified what operating system is installed. I'm fairly certain this isn't Windows 8. Your venerable PC is a bit too far back in the Windows 8 compatible PC platforms. It's impressive that it continues to work after all these years.
If you have installed Windows 7, then the simplest solution, especially if you have access to a router wireless, would be to install a dongle usb wireless for internet access.
Maybe you are looking for
-
I have an iPhone with iOS 9.3.1 6s system. Once the updated software has been installed, a point red (message notification) remained on no message on the lock screen and the messages screen. How can I turn off the message alert/badge?
-
Appropriate driver version appears didn't not in device - 3510 all-in-one printer Manager
I just installed a HP 3510 all-in-one using the online service that uses the most recent driver. This driver is DJ3510-1315, 28.8 version, dated 10/2012. I unchecked a few additional elements, such as Bing and improve. Everything is going well, but a
-
I have overclocked to the screen at 75 Hz, but I see no different during playback of some games (think that the game is hardcore for a Max of 63 MF, mass effect 3). My screen can handle an overclock of 80 Hz and still shows not all of the artifacts.
-
Easy way to extract the line of two-dimensional array?
Y at - it an easy way to extract a two table row Dimensions? I have two lists of table to a dimension that I consider a pine table, where each pin list is a table of numbers. I want to go through it and to extract a line at a time to send in a vi. Cu
-
How to navigate in a running block diagram which is used in a high school?
I have a Subvi called Servo.vi which is called several times (cloned) in my application. The façade of a selected Servo.vi is placed in a secondary school in my Main.vi so that Servo.vi can be controlled from the front panel. When the Main.vi is runn