Re: Tecra S10 disorders with drivers

Similar Questions

• Tecra S10 - Windows 7 drivers wanted

  Hi, after I installed windows 7 ultimate on my tecra s10 I am looking drivers for windows 7, especially the pilot 3 g (gsm), the bluetooth driver and the shock sensor driver (HARD drive). All other works correctly with microsoft provided drivers. Thanks for the help, Daniel

  Hello Daniel

  In my view, it must be checked for drivers and tools available at first and then decide to install more recent or not OS.
  In any case I am happy to know that you have no problems running on your laptop Tecra Win7.

  According to the document, under http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm your Tecra Toshiba will rely fully for Win7 but for the moment, the drivers are not available on Toshiba Win7 download page - http://eu.computers.toshiba-europe.com/innovation/windows7_drivers.jsp

  What you can find and install at the moment is newest version of 7.00.10 for Win7 BT stack and you can find the Toshiba BT Portal under http://aps2.toshiba-tro.de/bluetooth/
  From time to time, check the Toshiba download page and check if the drivers are ready to download.

  Good luck.

• Tecra S10-142 - how to fix touch Assist from Toshiba?

  I have a Tecra S10-142, with Windows XP.

  The * Toshiba assist button * does not work because this utility is not loaded at startup.
  What can I do to fix it? Where can I find the drivers to install this utility?

  Thank you

  Hello

  I agree with the user above. You must install or reinstall Toshiba Assist, which can be downloaded from the Toshiba page.

  The installation should be performed in a few clicks only, and maybe you have to restart the laptop. After that, it should work.
  Can you confirm this?

• Can Tecra S10-176 - I install Windows 7 64 bit?

  Hi all,

  I'm new to this forum. I just bought a Tecra S10-176 with Vista Business 32 bit and I could upgrade to Windows 7 Professional 32 bit pay 29 euros.

  However, I'm tempted to buy a license for Windows 7 Professional 64 bit OM. Since Toshiba support center (Italy), I have not received any clear indication of the benefits of the Tecra S10-176 with the 64 bit version of Windows 7 Professional. Can someone tell me if it is (or is not) a bad idea to install the 64-bit version on my Tecra S10-176?

  Thank you
  Marco

  Hello

  Theoretically, you can install what you want on your laptop. It s yours! ;)
  And I don t understand why you think that Windows 7 64 bit n t be a good idea.

  I checked the Toshiba for Windows 7 64 bit drivers page and it seems that they are all available. This means you get all drivers! :)

• Tecra S10 - 10F - Support Button Multimedia problem

  Hello

  I have Toshiba Tecra S10-10th with Win Vista SP2.
  I have problem with Toshiba button Support.
  After a clean install of Vista, everything works fine. Now two buttons next to the button toshiba walk / stop don't work. When I uninstalled 'toshiba value added package', buttons was answered but open "windows Mobility Center.

  When I installed Toshiba value added Pachage once again, the buttons are no longer...

  Could someone help me pls?

  THX

  Hello

  This strange s
  Usually the installation of VAP should help you get the buttons working again.
  Value added package contains tools and utilities that are necessary for the functionality of the multimedia buttons

  Please install the VAP, and then configure the keys still using the utility button Toshiba located in Toshiba Assist-> optimize

  There you have to click on the button, and then you set some for some exe file button.
  Single exe files are in C:\Programs\Toshiba\TBS

  Welcome them

• Tecra S10 - video configuration TurboCache

  Hello

  As you guys know now, Tecra S10 comes with a Quadro NVS 150 with 256 MB dedicated memory and beyond 1 GB of TurboCache.

  Thing is that I don't really need so much video ram so I thought that if there is a way to change this.

  So, I could increase my available to approximately 3.5 GB 3066 MB ram system. I have 4 GB on my system and theory
  I should be able to see at least 3.5 GB on Vista32 of RAM available on the system, but I'm guessing that turbocache he reserved.

  Best regards

  j.c.

  Hello

  The turbo cache cannot be manually set to a lower value.
  The point is that the value of the turbo cache depends on the amount of RAM.
  The more value RAM more turbo cache.

  Everything is controlled automatically by the graphics driver

  But note; the value of the turbo cache is not only all the time. If an application does not need full turbo cache then this will add to the value of the RAM again.

• Tecra S10 does not hibernate on XP Pro

  Hello

  Tecra S10-10th with factory v Bios 1.60 (localozed in Polish). All new opened its doors today.

  Everything works except that the machine hangs during the return form XP hibernation mode.
  Recovery DVDs contains XP Operarting system preinstalled Service Pack 3.

  Tecra freezes after completing the progress bar white together for recovery XP (progress bar) at the bottom of the black XP start screen.

  No additional apps installed - PC brand new, created from plant Toshiba Recovery DVD with XP PRO SP3.

  Please help me.

  Hello

  I put t know if it will be useful or not, but one of my friends had a Tecra S10 and Windows XP froze from time to time

  He has updated the Authentec fingerprint software and this was the solution!

  The necessary software update can be downloaded from the page of European driver for Toshiba!

  Find out!

• Need driver disc to install Windows 7 on Tecra S10

  Hello

  I have a Tecra S10 - 11I with Windows Vista and I buy the seven Windows Update but when I try to install it, a message told me to install the driver from the cd/dvd drive (it is a Teac DV w28s-rt) and can't find it, can someone give me the link to download it or show how I can install windows 7 on my pc

  Thank you. (Excuse me for my English)

  For disk drive optical feature you n t need to install an additional driver.
  You can use your optical disc drive, the usual use of DVDs and CDs?

  Can you maybe send a screenshot of this message?

  As far as I know when you start the upgrade (upgrade disc put in ODD) you should see THE menu.

• Tecra S10 - e-SATA with WD MyBook problem

  I have Tecra S10-10 loaded with win 7/32 final. From the beginning, there is fixation e-sata WD MyBook problem - most of the time cannot be reached
  and Device Manager hangs up refreshing devices. Only restart after sometimes he can be attached, but only those by boot allows. All other devices works fine. Before win 7
  I worked with XP no problem also.

  I tried to update the drivers for the chipset for win 7 - but it failed with the message that this computer does not meet the minimum requirements.
  The BIOS is 2.0. Trying to upgrade the BIOS to 3.0, he replied that Intel TXT must be disabled, but it is set in the BIOS, option cannot be selected.

  No idea how to fix e-sata?

  Hi Damir

  As I see that you do have a general problem with e-SATA, but just when you want to use this device to some so I think that the solution is not so easy.
  This device is not known to me, but I suppose you guessed it with USB cable. You can use it with any other standard USB port?

• Tecra S10: undefined screen with a resolution of 1280 x 800

  Hi all,

  I have a strange problem with the resolution of my Tecra S10.

  My system:

  * Windows Vista, later lowered to Windows XP SP3 with the last update
  * Latest Toshiba nvidia drivers

  My default resolution is 1680 x 1050 initially and the display is sharp and perfect proportional to the screen (15.4 ", 16Million color), even if the icons are quite small.

  I changed my resolution of 1280 x 800 using the steps described in the user manual. But the screen is fuzzy and ill-defined.
  According to the manual of Toshiba (Tecra S10 Satellite Pro S300) my NVidia video card supports the resolution of 1280 x 800 WXGA mode.

  How can I put mode WXGA?

  I appreciate all suggestions that solves the problem.

  Best regards
  Biagio

  Hello

  To be honest you write on this is certainly not a problem but something usual for views. The display will be sharp and perfect when you set the view to the native resolution only.
  If you choose some other low or high resolution the illustrious office will be either too big (does not fit in the display) or will be blurred.

  The same situation is on my Tecra M1. Test it on all laptops, and the situation will be the same. I'm now working on Satellite P200 with 17 inch screen. For this display's native resolution is 1440 x 900.
  When I reduce the resolution the office is always fuzzy and ill-defined.

• Two screens DVI on Port Replicator II with Tecra S10-160

  Hello to all 2!

  Right now I'm working with two external 19 "TFT screens connected to the Port Replicator II (Tecra S10-160 inside with closed screen). A display is connected to the DVI port available, the other is connected on the available on the Port Replicator II VGA port.
  A single display (DVI) is used as the main office, the other (VGA) is used as office improved (both show different content).

  My problem is the poor quality of the VGA signal and the problem, my two new screens are only supported DVI.

  Is it possible to connect two DVI displays to the DVI - D Port Replicator II? I already checked several DVI-Y-cables, but I'm still looking for a solution connect two displays via DVI with the function to get two split screens and not the same content on both screens.

  Hope you got my point and have information or ideas for products for me.
  Thanks in advance.

  Hello

  Have you already tested a VGA to DVI? So, you can use the VGA connector on the port replicator and your monitor's DVI port.

  I mean such a cable like this

  Such an adapter you can always use the function to get two split screens and not the same content on both screens. :)

• Issues of update/upgrade of equipment for Tecra S10-183

  Hello

  TOSHIBA TECRA S10-183
  Serial number: xxxxxxxxxxxxxxxxxxxxx
  Model number: PTSB3E-0YR04KGR
  Code BTO: P8700/2G/160G/15.4WBT/DS2/L/M/B/W/3G
  Pre-installed software: Yes [R11382GR]
  Purchase date: 13/05/2011

  I use above professional mobile phone use for CAD programming as well as for Office applications.
  2 GB RAM (standard), I can increase up to 4 GB Kingston (ex aequo) on purchase.
  With the 160 GB HARD drive, I had a lot at the beginning of the loss of speed.
  So I leave a month later to a switch of OCZ Vertex 120 GB of a second
  And lasted almost 9 months without problems.
  Now, I don't have so much free space in my SDS. So I would like to
  'Intel SSD 520 Series 240 GB 2.5 SATA III'
  Skip the leave.

  My question would be, I would get this problem?
  (1) in theory, SATA3 work perfectly well this SSD 240 GB right?
  In the manual, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.

  (2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
  Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.

  (3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?

  (4) can I switch to a processor / CPU? What size?

  (5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?

  (6) I still can't be on the Toshiba support site:
  http://de.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/
  find when you enter the serial number or model number is not my laptop?

  On a response, I would be very happy.

  Sorry for the bad English. My language is German!

  So I hope that someone can help me with my questions.

  With sincere friendships.

  Etem Basoglu

  > 1) in theory, SATA3 work perfectly well this SSD 240 GB right?
  > Manually, it is up to 120 GB SATA2 SSD in it. However, the 2009 manual. The information is very old. And at that time were not yet 240 GB free for end users of hard drives SSD SATA3.

  The SATA controller is not limited in size, you can use 250 GB, 500 GB or more large hard disks. The same should be possible with SSD drives since the controller is the same.

  (> 2) is there any Windows Professional / Ultimate / Business 64 for 7 as this laptop?
  > Original, I have Windows 7 Ultimate 32 bit. I wanted that my memory that expanded up to 8 GB. CAD program running on the 64-bit operating system much better.

  Don't know what you mean exactly, but if you want to installed Win 7 64 bit, then you can do without big problems the 64-bit drivers are available on the European driver Toshiba page.

  (> 3) is the card graphic and/or welded directly on my cell or can I leave replace it? It is a plug-in card?
  The laptop seems to be equipped with a NVIDIA Quadro NVS 150 M chip graphic. This is an external chip that is connected/soldered on the motherboard. But even if you can remove this chip, the upgrade is NOT possible.

  (> 4) can I switch to a processor / CPU? What size?
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  Generally the CPU upgrade depends on the chipset of the motherboard.
  You could upgrade the processor, if the chipset would support the new processor.
  There are still questions about BIOS support, but I've read here in the forum that some people have been able to upgrade the new processor.

  (> 5) the Mobile UMTS and HSDPA / HSPAU / LTE is capable?
  Support for 3G modules appears to support the HSDPA standard

  (> 6) I still can't get on the Toshiba support site:
  > http://de.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/
  > find when you enter the serial number or model number is not my laptop?

  Maybe it is not inserted into the database, but your Tecra S10-183 belongs to the series of PTSB3E that you can search other models belonging to the PTSB3E for details

• Can Tecra S10 - I order a recovery to another disk?

  Someone knows how to change the language of Windows 7 on a Tecra S10?
  Can I just order a recovery disc Englsih from here:
  [https://backupmedia.toshiba.eu/landing.aspx]

  If so, what is the price of these discs?

  The PC has a license for the preinstalled Windows 7 Pro 32 bit German, and I need it in English.

  Hello

  I doubt that this will be possible.

  You can order the recovery disk only with the same Windows operating system which was preinstalled on your laptop.

  If you need a different language of Windows or another version of windows, then you will need to purchase an original MS Windows disc.

  This means that you will get the new clean operating system, drivers may be downloaded from the page of European driver of Toshiba.

• How downgrade Tecra S10 to Vista?

  My friend asked me to fix his laptop. There Tecra S10-11 has. He had installed Vista, but it was installed Win7.
  Now, he wants to come back that Vista, but it does not create the recovery disk. I checked the laptop and there 1.46 GB recovery partition.

  It seems too small. How can I reinstall Vista and remove the installation of Windows 7?

  I don't know what your friend did exactly and how he had installed Win7, but you can try to start the operating system from the HARD disk installation > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm but I don't think it will work.
  So to get Vista back you have two options:
  -To order the Toshiba Recovery disk under https://backupmedia.toshiba.eu/landing.aspx and have the factory settings or
  -To install Vista using the Microsoft installation disc. All the necessary drivers, tools and utilities that you can download at Toshiba support page > http://eu.computers.toshiba-europe.com

  The second option is not so complicated and with our help, you can do this. ;)

• Tecra S10 - problem upgrading to SSD Kingston

  Hello!
  Tecra S10 - I am trying to upgrade HDD to Kingston SSD 128MD.

  During the new installation of Windows 7-64 installer complains that there is no boot device valid to create the system partition, even if the disk is recognized. BIOS is later, I tried configuring IDE and AHCI.

  Is there a problem of General compatibility with SSDS and the notebooks?
  I noticed a similar problem with satellite A200.
  Thank you

  Hello

  How do you update firmware?
  Have you checked if a firmware update is available and necessary?

  Found a page of Kingston providing SSD firmware updates:
  http://www.Kingston.com/en/support/technical/downloads?product=sv100s2&filename=KDID110225a